flashing on the screen [lines] on Toshiba laptop

Every time I have connect, and then open the screen on my lap top it flashes. Move the screen back/transfer clears the screen for viewing but its now much worse

I would agree with the suggestion of BillSmithers it may be a hardware failure. If you say that the fault clears after you move the screen back and forth, it can be the ribbon cable that is the problem. I suggest that a professional repairman is studying.

Tags: Windows

Similar Questions

  • the touchpad on my toshiba laptop with windows vista is disable and I don't know who to make it work again

    the touchpad on my toshiba laptop with windows vista is disable, and I don't know who to make it work again.

    Hello

    Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
    and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
    So usually loaded at the top of the screen.

    There is also usually a TouchPad control utility that loads in the Notification area next to the clock
    at the bottom right.

    Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Toshiba downloads - access your model.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba forums - good source of info from others who have the same system or similar
    http://laptopforums.Toshiba.com/

    Check with the manufacturer of system support, documentation in line, or forums as there probably
    are shortcut keys that enable and disable the touchpad functions.

    Also check the control - Mouse - touchpad settings panel.

    You can also try this:

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
    The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
    (drivers), now right CLICK on the touchpad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
    RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
    of work.

    Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
    device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
    and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • The bass and treble bar keeps flashing on the screen of IE on my 1200 dv8t

    On my 1200 dv8t bass and treble bar continues to Flash on the screen using IE, can't type to do anything until he goes. How can I fix it.

    Hello

    If you haven't already done so, try to download and install the firmware update for this particular problem available on the link below.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96360-1&cc=us&DLC=en&LC=en&OS=4062&product=4186313&sw_lang=

    Once done, restart the laptop.

    Kind regards

    DP - K

  • treble buttons to quick launch keeps flashing on the screen and wifi turn off voltage

    HP pavilion dv8 quick launch button treble keeps flashing on the screen and now and again the wifi turns off and I have to keep back on.

    Hello

    Unless you have already done so, download and apply the firmware update for the capacitive strip on the link below which is intended to fix this particular problem.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96360-1&cc=us&DLC=en&LC=en&OS=4063&product=4034201&sw_lang=

    After the update has been applied, restart the laptop.

    Kind regards

    DP - K

  • Links on the BBC site as blank pages or flashing on the screen momentarily and jump once again (as in Firefox 20.0.1 not other browsers))

    The BBC last week have updated their Web site. Since Firefox seems to have trouble opening certain pages of the site. Links opens as a blank page. Sometimes the page flashes on the screen and disappears immediately. Pages can be found through a Google search, but will still not open in Firefox. Firefox only seems to have this problem, other browsers function normally. I tried to contact the BBC unsuccessfully. From what I've read on the site there are a lot of people complain about the appearance and content (no feature) and I guess they are wading through a large number of complaints.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • Google search results disappear after flashes on the screen for about one second.

    When using advanced Google search (http://www.google.com/advanced_search), the result will Flash on the screen for about one second, then I don't see that a screen is empty. Pressing 'Enter' again once does not change this white screen. It started there, at the time, that I've upgraded to Firefox 10.0 approximately two days. This problem could be caused by the Firefox update? When I use the Google Search base (https://www.google.com/webhp?hl=en), I don't have this problem. My OS is Windows 7.

    I'm glad to have helped, this thing sometimes works with General problems with Web sites and therefore often worth a try.

  • I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

    Original title: someone help please?

    Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

    So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

    Hello

    1. have you made changes on the computer before this problem?
    2 - what you want to say that you receive this error message during the installation of Windows XP?

    Check to see if the following is useful.

    Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

    Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

    Warning of the BIOS:

    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

  • IE7 flashes on the screen and then disappears immediately

    When I run IE it flashes on the screen and then disappears. It's been a while since I had the problem so my memory is fuzzy. I think he worked as IE6 but will not work under IE7 and cannot install IE8. I have Windows XP Version 2002 Service Pack 3. Can I reinstall Windows XP and start from scratch without losing all the stuff on my hard drive? Thanks in advance for any help. It is greatly appreciated.

    JW

    Install IE8

    http://www.Microsoft.com/Windows/Internet-Explorer/worldwide-sites.aspx

  • Unable to read the product key on Toshiba laptop need to replace

    I can't read the key from procuct on the sticker on my Toshiba laptop. How can I get a replacement one?

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Contact Toshiba Support at the link above.

    If you use the Toshiba Recovery Partition, normally it takes not reinstall Vista.

    See you soon.

    Mick Murphy - Microsoft partner

  • When Windows starts it is always a dialogue box that flashes on the screen and the CPU usage high (above 50%), after I connect sometimes for several minutes.

    Original title: at the start of Windows there is always a dialogue box that flashes on the screen, but I've known idea what it is.

    How can I determine which program is using this dialog box? I also don't expect high utilization of the processor (over 50%) after that I connect sometimes for several minutes. I see not all applications running in the Task Manager. The amount of CPU utilization in the services tab doesn't match what I see compared to what the gadget is read in my sidebar. Any ideas?

    Thanks in advance

    Hi Soan,

    1. What is exactly mentioned in the dialog box?

    2. when the problem started?

    3. did you of recent changes on the system?

    Method 1:

    Step 1:

    You can check if the problem occurs in safe mode.

    Start your computer in safe mode

    Step 2:

    If you are not faced with the question in safe mode, you can perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

    Method 2:

    You can read the following article and perform a full scan of security on your computer.

    Microsoft safety scanner

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. You can take a backup of important data before performing analysis.

    Method 3:

    You can also read the following article and try to optimize the performance of Windows Vista.

    Optimize the performance of Microsoft Windows Vista

    Hope this information is useful.

  • Acute and serious bars Flash on the screen intermittently without touching the controls on hp Pavilion dv8 1290

    Everyone experienced this nagging problem of having the bass and treble bars Flash on the screen of the PC, w/o tounching users the sliders control on top of the keyboard on a hp Pavilion entertainment pc dv8 1290?

    Tried the update some drivers not avial!

    Hello

    Have you applied the firmware update for the capacitive strip at the following link?

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96360-1&cc=us&DLC=en&LC=en&OS=4063&product=4207724&sw_lang=

    Kind regards

    DP - K

  • SFC.exe flashes on the screen and will I need to download a torrent file, what is the problem?

    Gateway NV54... Try to open the torrent file... Need sfc.exe. It flashes on the screen and disappeared! What should I do?

    Hello
     
    Perform the System Restore to the point that your computer was working normally.

  • Crash of Windows Vista after the SCREEN of HOME Toshiba

    Greetings,

    My father work laptop, a Toshiba Satellite L300D, running on Windows Vista, seems to have fallen, and it is promised (because he recently ordered a new laptop) that if I fix it it gives me.

    The problem is that as soon as the laptop turns on, after the start of toshiba, but before the vista screen start loading screen, the system stops and everything is white '_' in the top left corner that flashes and disappears, leaving me with an empty black screen. I tried all below, in vain.

    • Press F8, no matter how long, when and how many times, seems to have no effect. After pressing it enough times, the laptop starts beeping for a second every time I press another key.
    • Removing the battery and pressing the power button for 60 seconds seem to have no use either.
    • The recovery disks do not work. After that they load, the screen empty boring, with the small '_' rises again.

    Please note that before any loading screen, it crashes. I tried going in the system (by pressing F2) Setup and see if there is a way of fixing it. I don't see a possible solution.

    Help, please!

    Create a Ubuntu Live CD ( http://www.ubuntu.com/desktop/get-ubuntu/download ) put it in your CD-ROM drive, and then try to start with it (go to the start menu, use the arrow keys and enter to select your CD-ROM drive), and then selecttry without any change to your computer.

    If you can boot from this summer with success, it means that it is certainly a software or a hard drive problem.
    replace the hard drive will correct these two questions (you will need to get a new operating system) or you can try to clean the drive with a live Ubuntu CD and just buy a new OS (or use ubuntu).

    to retrieve all the files you need are on the disk, read this article http://www.howtogeek.com/howto/15761/recover-data-like-a-forensics-expert-using-an-ubuntu-live-cd/

    teengeek.freehostingcloud.com

  • Artifacts of the screen, then lock on laptop HP DV9724tx

    Hello

    I have a HP DV9724tx T7700 core 2 duo with 3 GB of ram with 32 bit Windows Vista Home Premium.

    On December 2009/January 2010, there were five windows updates published by Windows. These are:

    -Updated fo filter junk e-mail in Microsoft Office Outlook 2003 (KB977840) - haven't managed to update this a single OK

    -Update for Microsoft Silverlight (KB979202) - reinstall it froze my screen

    -Cumulative Security Update for IE8 for Vista (KB978207)

    -Update for Vista (KB972270)

    -Windows malicious software removal tool - January 2010 (KB890830)

    When I installed these updates, restart the screen would be artifact (blocks, lines, random colors) and then finally hang / lock the entire computer. Using system restore several times at a much earlier date made this judgment.

    I disabled since all the Windows automatic updates and the system is stable (but not up-to-date).

    Yes, I have installed the latest graphics drivers for the video card 8600M GS 512 MB (updated NVidia to Dec 2009). Still can not update Windows.

    Any ideas? Are all other HP laptop owners suffering from this and they were able to find a solution of HP or Windows?

    Never, EVER use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore.

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Flashing of the vertical lines in the tab bar?

    There are small vertical lines in the tab bar. They appear after the closing of the tabs. They are flashing, then change places when I place the cursor on any Firefox buttons or bars. And sometimes, they are flashing and the text cursor in the address bar of mirror.

    Disable all modules and themes does not affect them.

    I'll try to add a screenshot of the problem.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

Maybe you are looking for