scanner Fujitsu fi - 4120c Windows 7

Similar Questions

• How to install scanner Fujitsu fi - 4120c on Windows 7

  Windows 7 ask a WIA not one driver TWAIN driver?

  Here's what I did.  It is perhaps too late to help.

  (1) install the latest driver for vista

  (2) restart

  3) go to Device Manager

  (4) make a right click on the unknown device and click on set to update driver

  (5) select Let me choose and select an imaging device

  6) click on disk and go to c:\windows\fjmini and select fi4120c.

  (7) allow to install unsigned driver

  (8) you may have to restart after installation

  (9) try to open your scanning software, and then select the WIA driver for your scanner

  I installed 6 scanners 4120c on windows systems 7 now.  Works perfectly.

  I hope this helps!

  Andy

• I can't get my 4110 fujitsu scanner to work on windows 7

  I can't get my fujitsu scanner 4110 to run on windows 7 appears as unknown device, drivers not found I have trried on fujitsu support site, has no drivers for windows 7,

  I guess that if Fujitsu do not a W7 driver for their own scan, it is probably not a.

  I found that can help if you have the qualification of W7 version, where few people apparently got the 4120 (which has either a W7 driver) running in XP mode - http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-to-install-fujitsu-fi-4120c-scanner-on-windows/f38cc5ec-9a2b-47b5-bca4-a7096d6c3086?page=1

  As in:

  "2. I got this scanner works in Windows 7 64-bit edition via Windows XP Mode."
  No I didn't install any driver for the scanner on the base OS, and when I entered the windows XP mode, until I clicked on the menu USB and attached the scanner, I installed the latest Windows XP TWAIN of Fujitsu package. Reboot the machine virtual and then fixed the scanner. He finds the drivers and fortunately is scanning now. Fully functional. " and similar.

• Scanner Utility For Microsoft Windows will not uninstall

  I am trying to install drivers for a new Fujitsu scanner.  The installation process gives me a message that I need to first uninstall the Scanner Utility for Microsoft Windows.  I go to the control panel and go through the uninstall process, get an acknowledgement that it is uninstalled, but it's still there.

  How can I get rid of him?

  some things on the Internet immediately to protect me against the consequences of the break-in. I didn't know that the version of Windows is 64-bit, until I started to have problems with the scanner software.

  It's very strange to not be able to uninstall the software does not work.

  Colin

  The problem by uninstalling is in this case the software never have installed correctly in an incompatible operating system. At least some of the files and settings are not where they are supposed to be for uninstall work.

  System restore would be the first resort in this situation. Odd that you had only 3 points of restoration. I assume that you checked the box to show other Points of restoration as well. With my current settings of SR there is about 16 points of restoration.

  The last resort to undo the mess would be to backup your user files on DVD or an external drive and make recovery from a manufacturer of the system on your computer. That he would make an out-of-the-box state. Most computers have recovery disks, unless you use OEM provided utility to burn yourself. If your computer is all major OEM there will be a recovery on her partition. OEMs a method to retrieve their OS and system software without erasing your user files. You would still re - install all the programs that you added, but it may be a lot less painful to have to put everything back. This path you would still Fujitsu folders with files in them, but they'd be sure to delete at this time, because the system registry would be clean. Accessing recovery of the system in the start menu usually takes you straight into the destructive recovery mode (ie. reformatting the drive and just reinstall). It's a little more cautious to start the Windows recovery. There should be a recovery utility somewhere in a folder in your menu all programs that will give access to the less drastic ways of recovery (reinstall system only or reinstall drivers and programs).

• scanner not recognized on Windows 10

  I just bought a new computer Windows 10 and added my Canon MP216n printing and updated software of the Web site

  Initially, everything worked and now the Canon Toolbox can not find scanner.  My computer windows 8 on the same WiFi considers it, and it works fine.  I don't know why it stopped working.  I removed the printer and reinstalled but the same result.

  Any suggestions?

  Hi ronwebber,

  Please check the model number of the Canon printer you have.

  Model number would be MF216n instead of MP216n imageCLASS?

• MFC - 290C scanner does not. Windows error solution

  MFC - 290C scanner does not. Windows error solution

  Hello

  ·        You did changes to the computer before the show?

  ·        If it works much earlier?

  ·        What is the exact error message you get?

  I suggest that you follow the steps in the link and check if it helps you to solve the problem:

  http://www.brother.com/E-FTP/windowsvista/us.html

• CardScan Executive 700 c Scanner USB compatible with windows 7 64 bit?

  CardScan Executive 700 c USB Scanner drivers available for Windows 7 64-bit?

  CardScan has a 64-bit driver. It worked with CardScan 7.0.5 and Windows 7 x 64.
  http://www.CardScan.com/support/supportdocs/tech_doc.asp?doc=scanners/91004.asp

• Not able to use my Canon Scanner model CanoScanFB650Ui with Windows 7.

  I'm not able to install my scanner CanoScanFB650Ui I use Windows 7, probably compatibility issues. How can I solve the same?

  Have you tried to install in compatibility mode?

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > chose the operating system

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• How can I get HP 3015 all-in-one Scanner to work with Windows 7?

  How can I get HP 3015 all-in-one Scanner to work with Windows 7?

  Probably, you mean a Laserjet P3015 series multi function device?

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=UK&prodNameId=3815798&prodTypeId=18972&prodSeriesId=3815797&swLang=8&TaskID=135&swEnvOID=4062

• How can I get Canon CanoScan N676U Scanner to work in Windows 8?

  How my old Canon CanoScan N676U Scanner can work under windows 8?

  Hello

  The scanner can run on a computer that Windows 8 is there is compatible drivers from the hardware manufacturer. The manufacturer of the printer is responsible for creating compatible drivers.

  You can access the canon website to check if there are compatible drivers Windows 8.

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_n676u

  Refer to this article to know how to install a printer.

  Install a printer: http://windows.microsoft.com/en-us/windows/install-printer#install-printer=windows-8

  In addition, if there are drivers for Windows 7 you can install the driver in Windows 7 compatibility mode to check if that helps.

  Make the programs more compatible with this version of Windows: http://windows.microsoft.com/en-us/windows-8/older-programs-compatible-version-windows

  Response with the State of the question and we will be happy to offer you our help.

• Driver for scanner Fujitsu FI-5110eox for Windows 7 operating system?

  I recently bought a scanner model used fujitsu fi-5110eox, fujitsu said that they will not provide the driver updated to do this work with Windows 7.  Anyone know what else I can do to get the correct driver for this

  You can try the Vista drivers. Otherwise, you need another scanner.

• Fujisu Scanner fi-5110E0X2 under Windows 7

  I have a Fujitsu scanner fi-5110E0X2 I want to continue to use in Windows 7 Professional 64 bit if the maufacturer is not willing to update the driver for the scanner. My question is:

  Can I install and run the driver for the scanner in Windows Virtual PC / XP mode and expect it to work?

  It would be the only reason for which I need to install Virtual PC right now and I don't want to make the effort, if there is no hope of the scanner to work.

  If it has drivers for Windows XP, so it should work.  Since I have no Fujitsu hardware, I can't check it out!

• Usb connection problem scanner Fujitsu fi-6230

  Hi, im trying to connect a scanner usb (Fujitsu fi-6230). I installed ISIS and Twain driver (HP Compaq 8300 - Windows 7 x 86) host and the vdi (Windows7 x 86). The client is version 5.1 and I tried with PCoIP either with RDP (as far as I know do not support scan usb). The scanner is recognized by the host, but in the virtual is unrecognizable device not even as being unknown. There is no restriction for usb redirection in the display manager. I have uninstalled/installed Vmware USB Host controller, but did not work. Do I have to activate the GPO by default DC on RDP redirection? Can you please help, I don't know what is happening.

  Thanks in advance

  Well thank you for the help. No upgrades have been made. It was a new image. A windows 7 OS has been installed and has been optimized according to best practices of vmware. After that, the appropriate vmware view agent has been installed. The same agent was installed in another image whose behaviour is normal.

  I found this: https://communities.vmware.com/thread/440975 I did the quickprep instead of sysprep operation. I'll try the 2nd recommended method and I'll let you know the Message was edited by: alipkok

  After the 2nd solution, the problem seems to be resolved. I reinstalled agent version 5.0.1 - 640055. Thank you message was edited by: alipkok

• Cannot connect HP laserjet 2820 scanner for computer laptop windows 7 - printer working.

  I have installed HP laserjet 2820 all-in-one on the new laptop with Windows 7 (per network) - I was able to connect to the printer, but not the scanner.  And I can '; get the HP Solution Center.  Any help will be appreciated.

  Thank you for your response.  I tried the solution of Vista, but it did not work.  Guess I'll have to buy a very long usb cable.  Good day

• Trying to send emails through my scanner/printer and my window that educated told me that program file could not be installed or to load and go to the Help menu under 'detect and repair '?

  through my scanner/printer and my educated place window tells me that program file could not be installed or to load and go to the Help menu under 'detect and repair '? I need help with this

  Hello

  you say not what e-mail program, you use!

  It takes a lot more information

  ______________________________________________

  see if this applies:

  Looks like you need configure Windows Mail

  you need to configure your e-mail account windows mail with your ISP internet service provider

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail