Flat file with several spaces

Similar Questions

• Installer of Lexmark printer drivers saved in a folder "c:\Program Files \" (with a space at the end of this one!)

  I have a real problem.

  On my Windows 7 Professional machine somehow is an automatic update of installed Lexmark printer drivers and the installation program saved files
  in a folder names "c:\Program Files \" (with a space at the end of this one!)

  This all happened the day after without seeing me what was going on.

  It seems that the Windows 7 system does not like the folder or file names ending in a 'space' or a 'period' and it will not work with it.

  The side effect is that in some sort the system has copied EACH name on this new folder called sub0folder "C:\Program Files-" and I ended up with TWO files that have the air of the same name (even if we have a space at the edn of it ".

  It isn't really a problem in what I could simply ignore it (the other folder names corrrectly operates always OK). The only problem is that changes to 'Security' affect the TWO files because Windows 7 sees the two folder as the 'same' names when setting security.

  That's why, when I tried to mark the 'bogus' as 'not available' folder to everyone (including the system) it is the same for 'Program Files' (the real one) with disastrous consequences. I had the chance to get out and restore some semb; launched sound mind to my machine.

  But I'm stuck now with this annoying issue with many sub-fdolers (which are all unaccessable because the system cannot locate).

  My question is, how to remove a file that has a 'space' as the last part of his name when Windows Explorer cannot work with it?

  Thanks a lot with no matter what helpf with this very unusual problem.

  If you have the opportunity to make a complete picture of the system of the disc, I would before you try the following... just in case remove the "bad" folder ends up deleting all good also.  Alternatively, rather than remove the directory in the last step below, rename it using a command like

  ren c:\PROGRA~3 c:\badprogs {press Enter}

  If program of the 'real' the files and other directories survive unscathed, and then delete the C:\badprogs in the usual way.

  ******************************************

  In the search box, type cmd, then right click on cmd.exe and select "Run as Administrator".  Give the password when you are prompted.

  Type

  CD c:\  {Press Enter}

  to switch to the root

  Now type

  dir /x {press Enter}

  This will show you a list of directories of names "short form".  You will probably see something like this (from a x 64 Win 7 installation, is why there "Progra ~ 1" and "Progra ~ 2" directories ")

  Directory of c:\

  01/08/2012 13:19

  PROGRA ~ 1 Program Files
  30/07/2012 13:03 PROGRA ~ 2 Program Files (x 86)
  03/07/2012 10:46 users
  30/07/2012 20:16 Windows

  In your case, your directory parasite called or PROGRA ~ 3 (if you have x 64) or PROGRA ~ 2 (if you have Windows 7 32 bit).

  Now that you know the name short, which allows to delete:

  del C:\progra~3 {press Enter}

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• flat file to flat file with no intermediate loading table...

  Is there that something called a flat file for loading of flat file? For example, I have a file flat source with a few 100 lines, but with a few unwanted spaces. Now, I want to remove the empty spaces and put in another flat file in the flat file target. NO intermediary TABLES of loading / unloading ADMITTED. How is that possible using OWB?
  
  I guess I can load flat file source, file flat target and logic of expression necessary to get what I want. But I got an error VLD-1111. What I interpret the error, it's that I can't use the file as a table to generate a script.
  
  How to remedy this situation.

  Hello

  Check the design of map here:
  http://blogs.Oracle.com/warehousebuilder/file_2_file.jpg

  Now in OWB 11 GR 2, you can have the file-to-file card designs flat to flat and use templates of code that allow the mapping to run on an agent (the Agent Control Center), where the file is put in scene can be as light a system you want, for example in the mapping I use MySQL , but might be Derby or Hypersonic SQL, this will allow you to do things in the file as join with other files, transformations etc.

  See you soon
  David

• Need help to organize Excel files with several data

  Hello everyone!

  I'm working on a project consisting of a full acquisition system. I have great finisheda part of my program and now my guardian's ask me something else.

  In you project I have several datas: Move, force, speed, time,...

  And he would like that this data in the same Excel file with a predefined order. In the example: column 1: time, column 2: speed, etc.

  I already tried to work with the block 'write on a file of measure' and associate a different signal through a simulation, and it works. The first signal is the left column. The second signal is the second column. So it's ok about this. But when I try to link a VI unlike a simulation, that the file does not work. Even if I use the data of 3 or 4, I only had a column with some strange results.

  That's why I ask your help. I would like to know if you have a good way to solve this problem I want to clarify that I am a beginner in LabVIEW.

  I join my project in order to help you understand. I hope I was clear enough

  Kind regards.

  ML

  PS: Sorry for my English, I know that I'm not very good like that!

  Thank you for your project, including - it shows me that you are using LabVIEW 2015, which means that you have the Report Generation Toolkit, with the ability to easily generate Excel "Reports", available.

  If you really want to generate Excel (.xls, .xlsx) files, the GTA is, by far, the best way to do.  If you go to the search bar in the Forums of LabVIEW and type "Example revised" - the first 'hit' should be a post of two years of mine where I show how to use the GTA to more or less do what you described.  Give it a try with some of your data, and come back if you have any other questions.

  Bob Schor

• Installation of flat files with COD

  Hello world

  I have a client who wants to deploy the configuration custom and its application without having to rebuild the application.  I think through options (e.g. HTTP, manual copy on SD card), but would like to stay as close as possible to their current M.O., because I'm porting an existing application for BB.

  So, is it possible to install flat files as well as a .cod file?  I have not found anything, and it seems that the ALX files only allow you to specify several .cod files.

  Thanks for any help you can give,

  Jimmy

  Just a thought: could you build your flat files as a separate and just flat file of reference module project in your original code.  In this way, you would have only to rebuild your project of flat file.

• A style of pure paragraph with several spaces before...

  Hello

  I don't want to use a para style X without changing it (so it remains totally pure: not ' X + ') with different spaces before. And I don't want to change the space quickly and easily with a keyboard shortcut.

  Ideas! Thank you.

  Ariel,

  Excellent!

  With you idea and using several NJ, proceed as follows:

  

  I associate a keyboard shortcut for "NJ". So I put the insertion point to the beginning of the first line and play the shortcut!

  Very well! Thank you!

• Flat file with different layouts in one file

  Hello friends,
  
  Hello.
  
  I am new to ODI - data integrator Oralce 11 G.
  
  I have a flat file where I had to load data from flat file to an oracle DB (11G).
  
  The flat has 5 different file updates page (data from 5 suppliers to come as a single file and each presentation are different) and each corrresponds layout to a provider of information.
  
  I had to load each page layout of the data in another table with a single source file (which has all the information provider).
  
  Please advice.
  
  Thank you/Kumar

  good to have an in-depth look.
  https://blogs.Oracle.com/dataintegration/entry/managing_multi_record_format_f

  Let me know whether or not it meets your requirements.

• How to export data from flat file with ODI DB?

  We want to export flat files DB2 tables.
  Who can tell me how to do it with ODI?
  Please give me a simple example or steps.
  Thank you.

  There are two ways

  Either use IKM Sql to add files

  (or)

  OdiSqlUnload
  For OdiSqlUnload, you can use this technique to provide the connection parameters - http://odiexperts.com/?p=1985

• Import Illustrator file with several layers and sublayers as composition by keeping all layers and sous-calques

  I drew a map of the country with several layers and sous-calques, including the streets, cities, railroads...

  Now, I want to create a template for my colleagues in After Effects.

  To do this, I want to import the AI in After Effects, holding all sublayers and layers in compositions and subcompositions.

  When I do, I get the first two layers correctly, others just in a merged publication.

  What can I do to get all the layers of each as a layer in After Effects?

  Best regards, Raphael

  Illustrator imports only the first level of the layers. If you have groups or paths below you must release layer groups. The layers will then be stacked in the order in the form of layers. Then you need to move them to the top.

  The procedure is to select a layer in the layer Illustrator Panel, then without selecting any which specific element in the layer click on the menu in the upper right corner and select release to layers. All an elements in this layer will be transformed into layers. Now, select all, and drag them to the top above the original layer. This will leave the empty original layer and put all the elements in new layers.

  Here is a tutorial I made there are a bunch of years and who uses this technique to transform a mixture in a morphing.

  Morphing with Adobe Illustrator. I hope this helps.

• Querying a file with several records in the only positional line

  Hello
  
  I'm trying to interview a positional file with reading. It works very well with single single-line record. But how to solve the problem when there are multiple records with the single line? How to delimit records?

  Hello

  It's a little difficult to achieve...

  In your xsd translator remove this attribute * nxsd:cellSeparatedBy = "${eol}."

  and replace with this * nxsd:arrayTerminatedBy = "${eof}."

  It worked for me. Let me know if you need a more complete example.

  See you soon,.
  Vlad

  * Give points - this is the right label to reward an answering machine (5 - useful; 10 - correct) points for their position if they answer your question. If you think it's useful, please consider points *.

• faced with the question when writing data to a flat file with UTL_FILE.

  Hi gurus,
  
  We have a procedure that writes the data from the table to a flat file. RAC is implemented on this database.
  While writing data if the current instance, this procedure creates two copies of the data in parts.
  
  Any body can help me to solve this problem.
  
  Thanks in advance...

  I also asked this question, but it seems no final solution...

  In any case, here are two possibilities
  (1) the directory for the file among all nodes share
  (2) run you a procedure on a specific node

• Get the table to an XML file with several bays

  Hello

  So I was faced with this program I have for the past few months but I'm almost there. I have a program that creates several berries and place one after the other in an xml file, and each table has its unique name. Now, I would create a VI that takes this XML file and when the user enters the name of the table specific they are seeking it goes into the xml file concludes the table in its entirety under this name and displays in an indicator of output to be read on the VI. A sample of my xml file and the VI that creates this xml file is attached.

  Thank you

  dlovell

  Something like this should work for you.

  

• Overview of files with the space bar (Mac)

  I use a Mac, 10.5.8, Illustrator CS4.

  Is it just me or doesn't have the ability to preview by pressing the button space disappeared with this version? I can always get an overview of all my Photoshop files and icons on the desktop display thumbnails tiny, but with Illustrator, I get the orange document with "Have" only. Something I also turned on or off?

  It's a pain not being able to preview documents.

  Thank you.

  Holly

  Of course, this works as you suggested in OS 10.6.3.

  Thus, it may be time to upgrade once you do before you do anything to another update 10.6.3 immediately.

  This fixes some problems that you do not need to know.

  And thanks for the tip. Yu can marked this thread answered without awarding points because I think it would be useful for other users
  who do not know this feature.

  Play well.

  See you soon!

• file with several custom templates dialog box

  I need to be able to user multple select models of file (* .bin, *.exe...) in a dialosg file similar to the VI of file dialog express where he enumerates the directory and allows the user to select multiple files in a list from windows dir.  The express VI has an entry of bosses who takes several criteria separated by a semimcolon, but it seems not to be a way to provide control of the ring for the type of file and let the user choose the model he wants to filter the directory listing.  That is, > if the user wants to load files that are only * .bin, he wants only to display in the list.  How can I do this without multiple dialog boxes?