flicker of the cursor when you close or flushing a file

Similar Questions

• Why you put "Open a new tab" on the right side of the browser, when you close a tab on the left and you type a new URL in the browser on the left?

  I changed my computer from XP to Windows 7 and migrated my FF browsers. But... now the tabs at the top of the page are all right (they were upper-front left - where I loved her)

  The most important is the "open a new tab" + - is on the right. But that is not sensible. Why you put "Open a new tab" on the extreme right of the browser, when you close a tab on the left and you type a new URL in the browser on the left?

  How can I put my "open a new tab" immediately to the right of 'Close tab' - as if it was before?

  Please advise?

  Try clicking on "Restore default settings" in the palette to customize to reset the toolbar customization.

  • Firefox '3-bar' menu button > customize
  • View > toolbars > customize
  • https://support.Mozilla.org/KB/customize-Firefox-controls-buttons-and-toolbars

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

• How do you add a location to send it to the list when you right click on a file or folder?

  How do you add a location to send it to the list when you right click on a file or folder. I am trying everything I need to go clean my hard drive to a USB key. There are seven choices on the list but I need to change the list, so change 2 of the seven choices. Thanks for any help.

  original title: moving files and folders

  Hello.

  When you plug in your USB key and installed the drivers for it; It should then appear when you right-click on a file > Send to.

  See you soon.

• Problems with the cursor when you type

  I don't know if it's something in Vista, but I have terrible problems in Word and when typing emails. I can touch type and normal type without looking at the screen. However, I find when I look at the screen, the cursor inexplicably himself stuck about4-6 rear lines and hit the last piece in the middle of the existing text. In fact it just happened again - when I type ing he climbed to the title: why!

  I feel responsible because I don't get it in the older microsoft software that I use at work and it has never done in internet cafes - didn't have it a few months, but it drives me crazy: why it does this?

  Patjom, make sure that you do not have to hide when you type the value of the mouse pointer. Here are the steps:

  Open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking on the mouse.
  Click the Pointer Options tab, and then do one of the following:
  Uncheck the Hide pointer while typing Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How I have a lively symbol follow the coordinates of the cursor when you click it?

  Similar to this example: http://forums.Adobe.com/thread/1162104

  I can't find the simple code to make my cursor play a symbol where the cursor is. I'm doing a Brush tool that changes colour and fades with time, like chem-routes colors in the sky.

  Thank you!

  Hmm.

  How to use createChildSymbol?

  http://Ciruelo.jp/js/edge/CS/cursor2.html

  1: create a symbol called "Symbol_1".

  2: Add this code on Symbol_1 - Timeline.complete.

  //delete this instance when timeline complete.
  sym.deleteSymbol();
  
  

  3: Add this code to document.compositionReady.

  //on/off mousemove event handler method
  sym.$("Stage")
    .mousedown(function(){
      sym.$("Stage").on("mousemove",draw);
    })
    .mouseup(function(){
      sym.$("Stage").off("mousemove",draw);
    });
  //create instance of Symbol_1 on stage.
  function draw(evt){
    var instance = sym.createChildSymbol("Symbol_1", "Stage");
    instance.getSymbolElement().css({
      position:"absolute",
      top:evt.clientY,
      left:evt.clientX
    });
  }
  
  

  The basic method is like that. If you want to adjust the pos of the instance, number of instances, etc...

  Calc evt.clientX and evt.clientY, record the number of instances, calc distance between the instance that created before and so on.

  Good luck.

  UME.

• FrameMaker asks to save the document when you close it

  Hello

  I use Framemaker 10. Whenever I open a particular document, the document is opened in edit mode (with *) and aks to be saved when I close. It is the same when I did not any changes to the document. I tried to enable/disable 'remember missing fonts', but this did not help.

  Thank you

  Jason

  You can see this thread from the old user of freeframers.org

  Group. He explains the many reasons that FrameMaker asks if you want

  to save the document apparently unchanged:

  http://www.freeframers.org/archive/03/msg00675.html. An old message

  States of combs of Richard, "If your document contains graphics imported by".

  reference, inlays (the automatic update value) text or links to other files, FM

  updates when you open the file. The Save command is enabled

  immediately, before you so by moving the slider... »

  You can change this behavior by using the edition > remove auto

  Command update in reference books, or edit > update references >

  Commands > remove the automatic updates in a document.

• Stop the movement of the cursor when you click on the field

  Hey there,

  I am trying to find a way to stop the trackball to move the focus around a bunch of fields I have in a custom handler that I created. I want that the development movement will not apply when the user clicks on a field, with emphasis.

  The reason why I want to do is to move this autour field and NOT the focus.

  Is it possible to implement this switching between the two?

  Thank you for your help.

  NavigationMovement to implement in these areas. Set a Boolean inside this field switch when you click on it, and then, in navigationMovement, check that then call your special treatment and return true or return super.navigationMovement.

• Lose the italics of the word when you are exporting FrameMaker 11 files

  When I import a Word file into image - the italics and boldface are maintained. But if I save the file as HTML or XML - that they disappear. If I retag them with character tags, they are maintained, but work in a science paper the italics are everywhere. Is it possible to find the italic origin and replace with label of character?

  I use FrameMaker 11.

  Are applied in the form of tags in Word character attributes or are they fair substitutions? Check the FM file to see if the items in italics and bold character applied tags. If this is not the case, use the search/replace to quickly label elements.

  1. first create the appropriate character tags.

  2. apply the tag to a single instance.

  3. use the copy > special to pick up the tag of characters to the Clipboard.

  4. use find it > Format characters to find the attribute setting in the shape you want to tag (SHIFT + F8 sets at AsIs ensure you selectt only Hat properties that you need to look for, i.e. italic or bold).

  5. use by gluing... option in the change for you apply character tag to all instances found.

• Develop the sensitivity of the cursor when you use the Wacom pen

  Slider control is very rough with Wacom pen. Even with the control button, the control is a challenge. I know this is possible because this isn't a problem in the Google/NIK plugins. Improvement ideas/plans?

  Is it that you have?

• Can I lock the document when you close then reopen where I finished reading?

  Is it possible to lock the document to the page I read before closing so I don't have to try to remember what page I'm on when I reopen and I have to scroll through the entire document every time.

  Edit > Preferences > Documents > restore last view settings when reopening documents

• How to show the cursor when using wmp as an activex

  This page (http://msdn.microsoft.com/zh-cn/library/windows/desktop/dd564025(v=vs.85).aspx) says:

  
  
  During playback in full screen, Windows Media Player hides the mouse cursor when enableContextMenu equals false anduiMode is equal to 'none '.
  but I want to show the cursor on the screen, is it possible to solve? Thank you!

  Hello

  I understand that you do not want to activate the cursor when you use Windows Media Player Activex.

  It is better suited for the IT audience Pro on MSDN. Please ask your question in the MSDN Support Forum. You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• When you try to open a file of the photo to view the photo, it will automatically to the hp print model

  Original title: hpc309A printer

  In Windows 7, whenever I try to open a file of the photo to view the photo, it automatically goes to the hp print template.  It's so frustrating when I want only to view the photo.  Help, please!

  Hi MonroeBroadway,

  Welcome to the Microsoft community. According to the problem when you try to open a file of the photo to view the photo, it will automatically to the hp print model.

  ·         Did you do changes on the computer before the show?

  I'll help you with this problem. This could be a file association problem. I suggest you to follow the steps in the article and check.

  Change the programs that Windows uses by default

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  I hope this helps. Let us know if you need help with Windows.

• When to use the cursor for loop and the cursor (open, fetch, close)

  Hello world
  I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
  Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?
  
  
  
  
  Kind regards
  BS2012
  
  Published by: BS2012 on January 29, 2013 12:15

  All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.

  The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.

  Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.

  The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.

  With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.

  With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.

  However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.

• Only get a blinking cursor when you try to start after the installation of updates

  Original title: blinking cursor when you try to start

  After installing Windows updates last night, our laptop Dell running that Vista gives only a blinking cursor when you try to start

  Hello

  1 update you tried to install?

  Step 1:

  You can check out the following link and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover updates failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• Is there a way to display the coordinates of the mouse cursor when you are working in MS Win7 Works?

  original title: coordinates of the cursor

  Is there a way to display the coordinates of the mouse cursor when you are working in MS Win7 Works?

  Bob,

  You may need to use third-party programs to make...

  You can locate the mouse by using the steps in the link

  http://www.tipsnext.com/operating-system/how-to-quickly-locate-a-lost-mouse-pointer-on-Windows-XP-7/