Flight Simulator 2000 works only on Windows 7, need help!

Similar Questions

• Flight Simulator 2000 works on Win 7? Lost disc 2 MS will replace it?

  Flight Simulator 2000 works on Win 7?  Lost disc 2 MS will replace it?

  Sound Windows not listed on Microsoft 7 compatibility Centre, but given its age you are unsure it will work fully, or not at all. A quick search on Google shows that some people have had limited success. You can try Compatibility Mode to see if that helps:

  http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows .

  Regarding your drive lost, please see:

  http://support.microsoft.com/kb/326246 .

• Flight Simulator 2000 and Combat Simulator flights are loaded on my Windows 7 computer.

  My Flight Simulator 2000 and Combat Simulator flights are loaded on my Windows 7 computer.  Everything seems to work except the control stick.  There are vibrations and the throttle response, but the direction of the joystick does not work.  I just put a new hard drive and Windows 7 in my computer.
  The joystick works well in Flight Simulator 2.  Everything worked OK on Windows xp.

  Hello

  I suggest you to calibrate the joy stick and check if it works.

  1. make sure your joystick is correctly connected to the computer and turned on (if wireless).
  2. open the control panel.
  3. double click on the link of game controllers.
  4. search and unique click on your joystick in the list of controllers. If your game controller is not listed, make sure that it is properly fixed and functional.
  5. with your gamepad highlighted, click on the properties button under the list of controllers.
  6. in the new pop-up window, click the button on the settings tab.
  7. follow all the instructions in the wizard that appears and click Finish when done.
  8. you can also test all buttons and axes that your joystick offers tab Test make you all the buttons and sliders are working before relying on them in an application.

  Check this link for more information:
  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/fe074447-116D-4b51-8d90-3a24c7ed5154

  If these steps won't help, then you can contact the manufacturer for further assistance.
  It will be useful.
  Steve.

• MS Flight Simulator on Satellite A100 with Windows Vista

  Microsoft Flight Simulator 2004 (a century of aviation) does not load on my new laptop (Toshiba A100 with Windows Vista Basic operating system). The same program runs on my desktop PC that works with the Windows XP operating system.

  Whenever I try to load the Flight Simulator, it works partially in discs 1,2 or 3 and comes with windows 'disk error '.
  It also shows another "product I.D.'each time I try a new reload"

  any help... John E

  This funny s :D The own program of Microsoft is not supported by Vista :D

  Seems you can play only on Windows XP and not Vista :D

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Import aircraft from Flight Simulator 2000-2004

  FS2000/2004

  can I use the appliance on my fs2000 on my fs 2004

  Hello

  The following article explains how to import aircraft (such as the Concorde) and gauges from Microsoft Flight Simulator 2000 into Flight Simulator 2004 aircraft.

  Flight Simulator: How to import aircraft and aircraft gauges from Flight Simulator 2000

  http://support.Microsoft.com/kb/323930

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I make my Saitek X 52 Pro USB flight game controller work propperly with Windows 7?

  How can I make my Saitek X 52 Pro USB flight game controller work propperly with Windows 7?

  I'm sure I installed the correct drivers and software, but when I press a button on the X 52 flight control freezes (for example in FSX).

  Kind regards

  Niels

  Hello

  Have you downloaded the drivers from this link in the last answer?
  Click on this link and make sure you have your version of Windows 7 selected; 32-bit or 64-bit.
  Then there will be the hyperlink that says "free download required.
  Click on that and install the drivers for this device.

• LabVIEW 2009 .exe works only with windows 2000

  I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?

  Thank you

  dkfire wrote:

  If you build an exe on a XP machine, then it will work only on XP.

  You need generate the exe on a Windows 2000 machine to make it work.

  Simply not true - even close to not being not right.

  Chris,

  My guess is that the .NET component is not present on the pc of w2k.

• Flight Simulator 2004 install not on Windows XP

  I can't install Flight simulator 2004 on Windows XP. The drive I have is not recognized by the computer.

  The disc scratched or damaged? In addition, other drives do not work as expected?

  If you can see the disc when it appears in my computer, but the problem is when installing, I would suggest the click with the right button on the drive, click Explore, and the tree of files should open all files on this disk. Drag them to a folder on the desktop and run the installer from there.

• HP DV6768se Mini Remote works only on Windows 7!

  Just like the title says, my mini remote control won't work for nothing, I have windows 7 ultimate. I have the ENE CIR Receiver driver installed (41645) and with this driver, the only thing that works is the button to switch to the external display. I tried to change the battery twice (was a 2 Pack of brand new) still nothing. I even tried to change a new driver ENE CIR driver (44983) which is supposed to be for windows 7.but with this driver even not that external display button will work. This remote was working find on windows vista (but everything still sucked him )

  For your model, all you need to do is to install Quick Launch Button software, CIR driver comes into it.

  Uninstall the current ENE CIR driver, and install software QLB, Win7 Upgrade guide, here, your laptop is in level 2.

• Touchscreen driver works only under Windows 8

  Install Windows 8 on HP Touchsmart 520 is really a nightmare. Usually, the display driver installation procedure and Voltron Touchscreen product error 9998 drivers. Oddly, I managed to somehow work around this by using a different display driver (some beta-version of Intel), but it was buggy. Since the reinstallation of Win 8 I can't to install more touch screen driver. Given that the Touchsmart series sells on its touchscreen capabilities and given the fact that HP relies on the Microsoft OS is not only slightly irritating that HP has so far not been able to provide drivers of devices that work well with Win 8 Release Preview. What solution do you offer me? Wait? Back to Win 7?

  The pilot (Nextwindow Voltron Touchscreen) updates automatically after the installation of Win 8 RTM when you only run Windows Update routine. At least in my case it did, and it works fine.

  HP Touchsmart 520, win 8 RTM x 64 Pro (Volume, active key by the KMS server; in the case that sounds Chinese to you: ask Uncle Google; this German page has all the information you need: http://www.boerse.bz/hard-software/microsoft/windows-8/1168581-windows-8-rtm-final-build-9200-informationen-und-diskussion.html).

• Simple pass works only on Windows 7 pro standard user

  I looked through countless questions simple pass and found no clue.

  I'm used to simple passage, recognizing the need for a u/p that it registers the new website or offers for me to slide my finger for an existing installation.  This is nothing.  It is runing as I see in taskman.

  Recently, I've reconfigured my logon as a standard user.  I can't see exactly that as a starting point, but that is the only change that I can remember.

  Product number: A5F92AV Windows 7 Professional 64-bit Service Pack 1

  simple pass 6.0.100.276

  Jess,

  I might suggest that the account on the other is the fix.  The idea of alternative / new account was first suggested 06/11/2013 and now once again in Lil_Lisa27 (thank you, Lisa!).  Everything you've tried, it's the only solution that has accomplished the goal: get SimplePass working on your Windows 7 operating system.

  You can use the transfer tool to move account data or you can simply move to the new account, and then set the ownership and permissions.

  You can also continue to seek a solution based on the knowledge that it was discovered the underlying problem to the environment into account in this particular account.  Once you have your new account to work the way you want, you can certainly leave the account 'broken' in the system and continue to push what you think of new things to try to fix the SimplePass database.

  Be sure to create a Restore Point before you make changes to the program or anything outside your account.

  Good luck!

• Getting Flight Simulator 2004 to run in Windows 7

  I followed all 10 steps in the Microsoft support article.  I installed the latest drivers.  Flight Simulator will run in mode full screen 800 x 600.  Whenever I hit the key to the menu at the top of the window, the game stops.  I choose the options in the menu, but the menu disappears when I reactivate the game.

  It is becoming too much of a hassle for just a simulator and I think seriously just get rid of it and find another simulator which is fully compatible with Windows 7, because FS 2004 certainly isn't.  I don't care if Microsoft thinks it is.

  Hello

  ·         The same thing happens in an another user account?

  ·         This article/steps you have already taken?

  Try the suggestions listed in the below given links and check if this is useful.

  http://support.Microsoft.com/kb/823628

  http://support.Microsoft.com/kb/263039

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Intel Wimax 5350 works only with windows 7/t400

  As someone who uses the Server 2008 on my desktop, when I received my t400 a few days ago I hesitated at the idea of using vista.  so I decided to download and install windows 7 64-bit (Vista 32 bit... I did an install own good... I think).  I haven't heard of anyone having problems with the drivers wireless in windows 7 and, indeed, intel States on their site that windows 7 will automatically install the drivers for the card 5350 wireless.

  Unfortunately, during the installation of windows 7 was complete the drivers were not installed and I don't have access to the internet.  I therefore had to take my Office Wireless usb adapter, then plug it to access the internet.  Windows Update has not fixed the problem.  so I installed the visa of intel 64-bit drivers and windows told me that my wimax device has been recognized, the drivers have been installed, etc.

  except the wireless card still does not work!  He is currently under listening network cards as area network/2 connection cable unplugged/intel wimax link 5350.  I do not understand... should not it listed as being a wireless network connect as is my usb adapter?

  I think that the problem might be that in Device Manager, I don't have a driver for the controller network, serial port pci or pci simple communications controller.

  It is quite frustrating and I really regret not putting more thought in this installation of windows 7.

  Thanks for the help

  I have a T400 with 5350 Intel and Windows 7 x 64, I downloaded and installed the

  Intel PRO / Wireless and WiFi Link drivers only for Windows Vista * (3298 KB) and the

  Intel® utility connection WiMAX PROSet/Wireless for Windows Vista * 64-bit (9206KB) from the Web site below.

  http://Downloadcenter.Intel.com

  Furthermore, my "Intel(r) WiFi Link 5350' and ' Intel WiMAX Link 5350" listed in the "Network adapters" category, I have not any category 'Wireless Network Connect' at all. "

  I hope this helps!

• U2000 Dany works only on Windows 7

  I use dany usb tv card u-2000 using window7 64-bit addition dany card bus not proffesional with audio video projection

  How do I run it please help

  (Moved from music, photos and videos)

  Hi Muhammad,

  Please contact Microsoft Community. I've surely you will help solve this problem.

  This problem might have occurred because of these reasons:

  1 not compatible.

  2. lack of software or drivers.

  There is no information in the Compatibility Center Windows if Dany T-View U-2000 is compatible with Windows 7 or not.

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  I suggest you to check with Dany support if the device is compatible with Windows 7 or not. If so, check to see if a software or driver is available for the device.

  http://danytech.com/pages/contact-us

  You can also check whether or not Dany T-View U-2000 works on another computer.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.