Floppy image has a size not supported

Similar Questions

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• I have redownloaded my CS5 Photoshop and Camera Raw will not accept my RAW files or Adobe Bridge displays the display of the image of these files. A message appears saying: it does not support this camera.  I have a Nikon 5100 digital SLR.  He has always

  I have redownloaded my CS5 Photoshop and Camera Raw will not accept my RAW files or Adobe Bridge displays the display of the image of these files. A message appears saying: it does not support this camera.  I have a Nikon 5100 digital SLR.  He has always displayed them in the past.  How do I get to view these photos in Bridge, then open them in RAW?

  Your Nikon 5100 requires a minimum of 6.4 ACR.

  The ACR, which is installed with CS5 default is 6.0.

  You must update your ACR to the latest version available for CS5 - ACR 6.7

• Error trying to open .jpg from an SD card image using Windows Photo Gallery: this file format is not supported, or you do not have the latest updates of photo gallery

  Vista - Photo Gallery

  Tried to upload a .jpg from an SD card image (the image was scanned with a Pandigital Photo converter, slide, negative (model # 05 PANSCN).) This message appeared in the photo gallery, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "I inserted the SD card even in a HP Photosmart C6280 printer; the printer has recognized the file and print the photo. The converter from Pandigital is useless unless the Vista updates can 'cure' photo gallery. What do you, Microsoft?

  Tried to upload a .jpg from an SD card image (the image was scanned with a Pandigital Photo converter, slide, negative (model # 05 PANSCN).) This message appeared in the photo gallery, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "I inserted the SD card even in a HP Photosmart C6280 printer; the printer has recognized the file and print the photo. The converter from Pandigital is useless unless the Vista updates can 'cure' photo gallery. What do you, Microsoft?

  =====================================
  Just one question... when done scanning and recording of the scans...
  you select the options to reduce the file size by compressing
  the photos?

  If you have only a few of these scans... you could open their
  one at a time in Windows Paint and go to... File / save as...
  Enter a new name, choose a backup folder and choose .jpg.
  This will create a new version of the same photo and I suspect
  It will be compatible with Windows Photo Gallery.

  Also... it may be interesting to try to install Windows Live Photo Gallery.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Windows live Photo Gallery
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  No guarantee... but there is a possibility that reinstall
  DirectX can improve this problem.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  End-user Runtime Web install DirectX
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• VmWare Workstation 7.1 - Unable to P2V and seems does not support disk Acronis image images

  Hello.

  I'm trying to convert my computer into virtual machine using the Conversion Wizard in the VMware Workstation 7.1.

  My hardware is: Intel Core i7-920/6 GB of RAM/2x0.5Tb HDD/ATI HD4800. OS = Windows 7 x 64 Ultimate.

  I need to convert only 1 partition on disk 1 which has the OS and all S/W installed. The partition size is 150 GB allocated space = 72G, before the conversion has been defragmented and check-disked (chkdsk/f).

  The location of the target is a 'new virtual machine', located on a huge USB - HDD (K:\VM\vmWsXxx-WI7\), of course - I have access to all drives and places, and of course - there is enough free space on the target disk.

  The problems:

  (1) when I am trying to convert all the timeI'm getting the"failed to take.
  Instant error message of the volume of the source. In a log file I also see this message - "Vsnap didn't"

  admin rights.

  Purpose (!) I am connected with a user who belongs to a local "Administrators" group. And 'VMware Agent Service' service is running on the same user account. So, I guess - it must be enough to make Vsnap has all the permissions it needs! :-\

  (2) I also tried another way of P2V - I created a disk image of my partition with an Acronis True Image Home 2010 and tried to put this file to disk image as the source for the conversion of VmWare Wizard. But he reportedthe error - 'file may be corrupt or format not supported ". Makes me think that there might some bugs - in Acronis image that makes the supporting incompatible disk images or VmWar!

  My question is - HOW to with SUCCESS CONVERT MY COMPUTER to VM using a VmWare Workstation 7.1 or any other tool?

  Sub question is - why declare VmWare disk support Acronis image images but does not in a real?

  Or (if it supports their) there may be an incorrect error message - "file may be corrupt or format not supported". Maybe he should point out something else.

  What I tried:

  ensured all need services began a) this:

  net start

  UFAD-ws60

  net start "tcp/ip netbios support.

  net start swprv

  net start vss

  (b) I run shell commands - "writers vssadmin list,"vssadmin list shadows"- the two commands work fin, so assume VSS working properly."

  (c) have tried to run this long shell script

  CD %systemroot%\system32

  net stop vss

  net stop swprv

  regsvr32 ole32.dll

  regsvr32 vss_ps.dll

  vssvc /Register

  regsvr32 /i swprv.dll

  regsvr32 /i eventcls.dll

  regsvr32 es.dll

  regsvr32 stdprov.dll

  regsvr32 vssui.dll

  regsvr32 msxml.dll

  regsvr32 msxml3.dll

  regsvr32 msxml4.dll

  BTW, I got a lot of error messages about this script:

  • The module "swprv.dll" was loaded but the call to DIIRegisterServer failed with the error code 0 x 80070715.

• The module "eventcls.dll" was loaded but the call to DIIRegisterServer failed with the error code 0 x 80070715.

• The "es.dll" module has been loaded but the DIIRegisterServer entry point was not found.

• Make sure 'es.dll' is a valid DLL or OCX file and try again.

• The "vssui.dll" failed to load module.

• The "msxml.dll" failed to load module.

• The "msxml4.dll" failed to load module.

MSXML.dll, msxml4.dll and vssui.dll it is not a surprise because these dll does not exist on Win7 x 64 in the %SystemRoot%\System32 directory.

I found msxml4.dll in SysWow64 - registered. But msxml.dll and vssui.dll are really do not exist on Win7 x 64. Then, for sure - this script itself is the problem!

What other options I do P2V conversion?

Are there configuration problems more can I fix it to make the work of P2V conversion?

Kind regards

Dmitry.

PS please see logs 2 closed - system directly, 2nd - diary of the conversion attempt using Acronis True Image Home 2010 disk image works 1 journal of P2V conversion attempt.

using regedit is possible

You obviously did not read

Select HKLM, then Menu > file > load hive.

_________________________

VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

You find me also in the PhD Virtual Backup support team

• Invalid launch image - your application contains a launch image with a size modifier which is only supported

  I use the latest Adobe AIR and SDK, 3.5. The app works on my iPhone 5 and displays the loading screen, but by doing an app store version and upload I get this:

  Dear developer,
  
  We found one or more problems with the delivery of your recent for "eat sleep skateboarding". To process your order, the following questions must be addressed:
  
  Invalid launch image - your application contains a launch image with a size modifier which is only supported for applications built with the iOS SDK 6.0 or later version.
  
  Once these issues have been fixed, go on the release Details page, then click on "Ready to Upload binary." Continue through the submission process until the status of the app is "Waiting for Upload. You can then deliver the binary has been fixed.

  So he complains on my [email protected] I think. If I delete it, he could accept the file, but I really want to a loading screen. So, how can I fix? I only find solutions for xcode developers

  You are probably not using the last available AIR SDK. Labs releases contained a bug leading to this issue.

  So, update your AIR SDK from http://www.adobe.com/devnet/air/air-sdk-download.html should solve the problem.

• Portege P3480CT does not support the CD and floppy drive

  Can someone help me with the following:
  If I start my Portege I get the message: lack of OS...
  I have tried everything to make him work, but it does not support my CD rom drive and a floppy drive.
  Does anyone has a suggestion how to get my protected work yet?

  Thank you very much

  Anton

  Hello
  as far I know the Portege has it a USB floppy and a map of PC CD-Rom.

  Have you checked the Bios of your laptop, especially here the boot priority settings?

  The Bootdisc for Windows 95, Windows NT and Windows 2000, do I have in my archives. I have that helps you, give me that send you an email so that I send you the Bootdiscs.

  Good bye

• Thin Client T510: Do not support the SMB for no image preload on Linux platform

  Hello world

  I have a problem with a Thin Client T510 (C4G87AT #ABA), this one came with Windows CE and today I flashed with a USB to thin Pro 5 (T6X52011). When I want to deploy the image I captured (wallpaper, RD Session etc...) I have the following error:

  2015-08-19 15:30:43 [error details]:... /... / Task/linux/ImageTask_Thinpro.cpp@384: Metheod of the Image is not compatible.
  .. /.. / Task/linux/ImageTask_Thinpro.cpp@1624: do not support SMB for no image preload on Linux platform.

  When I look in the console HPDM, I see the T510 and connected

  Agent version: 4.6.3670.21244

  HDPM 4.6 SP5

  OS: T6X52011

  My OS: Windows 8.1 x 64

  Can someone help me please? Thks and have a nice day.

  Hi, thks for this Council. Theres is how I fix.

  Firstly, the master repository has change from D:\HPDM\HDPM to D:\HPDM on the server, so the configuration was not good at the moment. Another thing, the password of the user hpdm has changed in Active Directory, but not in the configuration. I changed all the settings for in line with the current configuration and capture Images of thinpro news works very well and deploy this new works pictures well too but Deplopyement of old images does not work.

  I'll open another thread if I need assistance. In this case, I'll mark as fixed.

• uestion on a plug-in which has worked so far and I see that now its all of a sudain not supported

  I use for couples to Download Accelerator Plus years and has ALWAYS been very good integrated.now, I see it says that is not supported, or when going t see the list of plug-ins, its sayng that the plug is installed but the program not(or_the_program_it_is_instaled).so can you tel me what is the mater with your browser?

  DAP is not made by Mozilla. It is the responsibility of the developer (Speedbit) to update and make it compatible with browsers:

  • DAP 9.7 (that you have installed) is compatible only through Firefox 8; See info on the Speedbit page-> http://speedbit.com/dap/
  • They have a 10 betaversion, but it is unclear on what versions of Firefox are supported on Speedbit's website-> http://speedbit.com/beta/

  You may need to do a search for any information on the internet regarding the compatibility of version beta with Firefox.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  Do you still have the MBP? If so you can manually copy and paste the files you need.

  If you do not have the pro more, you need to buy a USB key and plug it into the MBA... use it as a target. Once you have a system file of the previous laptop again, you have to manually choose what to copy across.

• Windows 8 does not support HP Officejet 6500 has more

  Dear all,

  My operating system is Windows 8, however, when I install the HP Officejet 6500 has more, I'm unable to install the printer driver. The error message "the operating system is not supported".

  I would also ask HP to meet this emergency request.

  Thank you

  George Tay

  Hello

  Where do you find the printer driver? From the CD? I believe that the CD is released before Windows 8. This can help:

  http://h30434.www3.HP.com/T5/Windows-8-release-preview/Windows-8-driver-information-for-LaserJet-ScanJet-and-other/m-p/1856247/highlight/true#M703

  Kind regards.

• Paper size error: the custom paper size specified is not supported in the selected state bar

  I am trying to print on custom size paper (9.25 "x 3,875").

  I have OSX Lion and a 8600 Officepro more.

  I inserted the paper into the tray of my 8600 Officepro more.  I adjusted the sliding walls to match the size of the paper.

  I created a new custom in my print settings format.

  But the printer says:

  Paper size error: the custom paper size specified is not supported in the selected tray.

  What the...?  How that recalcitrant monstrosity to behave and do what I have to say?

  Here is the link to the manuals for the 8600 Pro JO.

  You want the user's guide.

• Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Your lowered obtained resolution. This can occur if you are running an older game that uses 800 x 600 for example.

  Control Panel > display > settings - change the resolution to correct for your monitor. MS - MVP - Elephant Boy computers - don't panic!

• Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support

  Original title: error reading from a photo cd

  Error message "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support"when the disc is inserted into the PC HP Touchsmart yet he plays on the laptop.  Help please

  Hello

  (1) what is the file format of the photos on the CD?

  (2) you are able to play another CD/DVD on this computer?

  (3) have you made recent changes to the computer before the show?

  (4) is it a Blu - ray disc?

   

  Install the codec for Blu - Ray. Your Blu - ray player should have come with a medium containing the codec. You can also use your favorite search engine and free research Blu - ray codec.
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  If you have a program that supports Blu - ray, then I suggest you to use the Troubleshoot utility and check for the issue.

  You can try the following methods and check if it helps.

  Method 1: Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

   

  Method 2: Types supported by Windows Media Player files
  http://support.Microsoft.com/kb/316992

  NOTE - using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.

• In the detail view folder sizes. What Microsoft has to do not display a list of folder sizes in the detail view? I don't want to post this in the comments...

  What Microsoft has to do not display a list of folder sizes in the detail view?  I want to just see my folders in the list view and know how big each folder is!  Is this a lot to ask?  Are you (MS) collusion with folder size software companies so that they can sell me something that should simply be in Details view? Is it because it could slow down my experience of 'Windows' that is not so great anyway.

  I don't like what MS has to say.  This is not a plea (or tip) for them to fix. I just want to know why they avoided (5 180 000 results according to Google) millions of requests for this feature Microsoft Users: why do you think that Microsoft has deliberately chosen to omit a column of 'folder size' seen in the window?

  Greg

  Why Explorer doesn't show recursive directory as an optional column size?

  http://blogs.msdn.com/b/oldnewthing/archive/2007/10/29/5750353.aspx

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/