Flow of data with 3G on Portege M400-139

Similar Questions

• Portege M400-139: can't find 3G modem

  I have problem with my 3G modem: I can't find my modem 3G (my computer/properties/Device Manager). When I bought my Portege M400-139, I saw this modem (my computer/properties/Device Manager), and I haven't had any problems with the modem.

  After 2 weeks, I lost the modem without any reason.

  Hello

  What are the first 6 digits of your serial number for Portege M400?

  As far as I know Toshiba has delivered two different protected M400 series.
  The series with number of PPM40E does not support the 3G modem and the series with the number of PPM41E has been delivered with the card 3 G.

  So be sure that you have the good series that supports this feature

• WRT 1900AC slows down the flow of data with Brighthouse

  I recently bought a WRT 1900 AC.  Synchronize straight up with my Brighthouse modem, but I noticed that the maximum data rate I can get through wired connections is 7.2 Mbps.  When Brighthouse is out focus on the system, they read 22 Mbit/s on the modem.

  One reason why the router should be reduced my flow so much?

  Excellent advice.  It's the correction that I needed

• Shutdown in Vista with a Portege M400 problems

  Hello!

  I have a problem with my Toshiba Portege M400 (do not know if it is a matter for the Council of vista or portege support plate, anyway). I installed Vista Express Upgrade a few months ago and everything worked fine for a while.
  But over the last 4 weeks, my laptop seems to have a problem when stopping down. No matter if she's just hibernates or shuts down completely, the computer automatically turns itself after being off for about 5 seconds.
  I have to use the switch to turn it off again (and then it stays off). Any ideas? I haven't changed anything and it could be a hardware problem, but my guess is that it has something to do with Vista ;)

  Thank you

  Alex

  Hello

  installed some software or tools/applications/updates? Sometimes, a small update can disrupt the entire system and preventing it from functioning. So, just check what has been installed and it may be useful to install the new bios, maybe update all drivers etc... Make sure that everthing is real and up to date.

  Welcome them

• Portege M400: click right button on the pen does not work

  Hello

  I can't button right-click on the barrel of the pen to work with my new Portege M400 tablet PC. I tried with the option 'Use the stylus buton click-right' in the 'Pen settings' tab 'settings in Tablet and stylus' dialog checked and unchecked, but none worked.

  Is the stylus defective, or worse still the computer? Or can anyone suggest how to operate?

  Thank you

  Toby

  PS: "pen" should be "nep" reversed in option, tab and dialog names above, but the silent filter profanity does not accept the word "nep" (reverse).

  Hello

  You have this problem since the first day? Please remember that the pen is not in a very long distance from the screen. As you know if the distance is too great the pen will not work as usual.

• Cannot read 'Cal of Duty 4' on my Portege M400

  HI - my M400 will not let me run COD4 despite loading and running a DirectX 9.0 c test - he appeared to pass this test.
  I think that the specifications of the PC are up to the min level required, but when I run it, it crashes. Is that what I can do or is this asking too much my Tablet? (Play on my Mac brothers and its awesome!)

  Specifications for the game are:
  Minimum configuration:
  Intel (r) Pentium (r) 4 2.4 GHz or processor AMD Athlon (TM) 64 2800 + or any 1.8 Ghz Dual Core Processor or better supported
  512 MB RAM (768 MB for Vista)
  GeForce™ nVidia 6600 or better or Radeon (R) ATI 9800 Pro or better
  Recommended:
  Dual-core 2.4 GHz or higher is recommended
  1024 MB of RAM (2 048 MB for Vista)
  3.0 supported recommended shader. NVIDIA Geforce 7800 or better, ATI Radeon X 1800 or better]

  Hello

  I agree with Jonathan. Portege M400 is really not portable for the games. Maybe some intensive games graphics not but Call of duty 4.

• Portege M400 and Vista - load PSD ends with crash

  I am an owner of a Portege M400 (PPM40E) and recently upgraded my Vista operating system. All new drivers work very well except for the * TPM *. Here's what's happening.

  There's nothing wrong with the installation of security platform. I can create a disc to ensure personal (PSD), load and unload until the first time I got disabling my computer.
  After each attempt to load the PSD is answered by an accident. Two seconds after the sending of password, I get a blue screen that informs me the source of the problem: * PFN_LIST_CORRUPT *, a memory dump file is created and the system restarts.

  Anyone facing this problem? Does anyone know how to restore data from a backup manually the PSD created? The Restore dialog box does not accept the * .fsb file.

  It would be great if someone could help me with this as I have not 'clear' backup files that I had stored on the DSP.

  Thanks in advance,

  Rob

  Hello

  I googled a little and found details of error PFN_LIST_CORRUPT.
  NFP: Page frame number and describes the sharing of individual images of main memory where the driver running or orders of this application.
  If an application or driver is beyond this scope, then a BSOD will appear.

  Here are a few tips and proposals to solve this problem I found on an external Web page:
  -updated the BIOS and set the default settings
  -reinstall and update the display driver, audio driver, LAN driver, etc.
  -Reinstall the security help,
  -update the Windows operating system

  In the worst cases, this problem could be caused by a malfunction of the RAM, and in this case, the RAM modules should be replaced.

  Sorry, but I didn't find more info on this issue.

• What is the largest external monitor I can use with Portege M400?

  I have a Portege M400-s5032x tablet and a pa3680u docking station. I would get a larger external monitor for use with the docking station, which is the largest monitor I can use?

  I have a widescreen 18.5 on there now and that you would go up to 20 or 22 inch widescreen.

  As far as I know that there is no limitation. You can use what you want.
  The only thing that may be problematic is the resolution of the screen.

  At the docking port DVI?

• Impossible to install Vista on Portege M400 - not compatible with ACPI

  Hello

  I have a toshiba portege m400.
  It has windows xp professional installed SP3 (the former owner he replaced with that of the xp tablet edition - I want to upgrade to vista so I can have the capabilities of the rear shelf!)

  In any case, I have a vista version - a version upgrade Home premium.
  When I try to install it it comes up with the error:

  +' This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed on a computer that supports ACPI. Contact the manufacturer of your computer for an update of the BIOS, or install Windows on an ACPI compatible computer. " +

  When I try to boot from the cd it gets up to when I type in the product key, but then he tells me I have to run this from my current operating system.

  I tried to update the BIOS (it is currently 1.8 and I heard vista needs 2.0 at least). I tried to install the latest driver from the Web from Toshiba - BIOS version 3.2.8 site but it says "this computer is not supported" even if I went through the procedure of choice of type of my laptop and spec and the pilot came on his list.
  Now I'm pulling my hair out.

  Can someone help me please!
  Would be to get a full version of vista (not an upgrade version) work and boot from the cd because it seemed to go further like this?

  Thank you!

  Hi guys

  I think I know how you will be able to update the BIOS

  I read here in the forum that in very rare cases, you have the Toshiba preinstalled OS in order to update the BIOS
  So in my opinion, you will be able to update the BIOS if install you the operating system from the Toshiba recovery disc.
  After installation try to update the BIOS

  After the BIOS has been updated you could install the new Vista

  See you soon

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• Portege M400 - how to remove the Protector Suite fingerprint data

  Hi all

  (1) Protector Suite 5.4 sometimes generated a crash of Windows XP on my Portege M400.

  (2) I followed the suggestion of WinXP and upgraded to version 5.8. Unfortunately, this way I lost the automatic access features to Web sites protected by (the online help 5.8 says that this module is optional, but I have not found how to install it).

  (3) so I uninstalled the 5.8 and put again on the 5.4.

  (4) in the event of a disaster.

  (5) it is clear that the fingerprint data, updated to 5.8 format, are still somewhere in the system. Uninstalling Protector Suite's not destroy them. For this reason the 5.4 original does not do something, because in its user opinion data are corrupted. First of all, I can't remove/change data user from inside the program.

  So, please, let me know where these data of fingerprints damned are so I'll be able to remove and Protector Suite from scratch.

  Thanks in advance.
  PEI

  Hello

  I think there must be a folder or files storing fingerprints
  But I m not sure where it is placed

  However, as far as I know, you can use ONLY PS to enrol fingerprints.
  Have a look here:
  http://img22.imageshack.us/i/protectorsuite.gif/

  There is an option that can cancel the stored fingerprints.

  If uninstalling the software didn't help then use and clean the BONES and using a tool, for example, the registry CCLeaner.
  It deletes all files and data on the HARD drive (in the registry) which have not been removed by Windows.

  Welcome them

• Portege M400 problem with virtualization

  I have problem with VT in BIOS VT is enabled, but Windows 7 do not. I instaled XPmode, but when I try to start I get connect this virtualization is disable. I don't know what I do mus.

  Hello

  What CPU you have in your Portege M400?

  Virtualization is a function of the motherboard (BIOS) * and * processor type. The fact is that not all processors are dematerialising and then you should check the specification on the first Intel page.

  Check this box!

• Re: Question about the CD/DVD player for Portege M400

  I have a Portege M100 - and the CD-ROM drive does not work.

  Whenever I put a disc in I can just hear the motor turn the disc, but the computer is not picking up the drive. Device Manager picks up flawless.

  It doesn't seem to be any firmware for this sorting (or am I wrong).

  I've seen a DVD player for a M400 on ebay and I was wondering if that would take on my M100.

  Before buying it, I was wondering if anyone knew if it would be compatible. It seems to be OK size wise, but I was wondering if my Portege M100 XP would be able to use it.

  The description for the drive I want to put in the M100 is below:

  Thank you very much for your time. :)

  Description

  DVD +/-RW drive for laptop Toshiba Ultra Slim Bay Portege M400, S100 & Tecra S3

  Compatible models:
  Portege M400, Portege M405, Portege S100-S113, Portege S100-S1132, Portege S100-S213, Portege S105-S1133, Tecra S3,

  The Toshiba Ultra Slim SelectBay DVD SuperMulti Drive is a DVD burner that combines all the functions of a DVD player, DVD recorder, CD burner, and CD player in an ultra slim and ultra light. It gives instant access to CDs and DVDs and fits perfectly into your slot to drive Ultra Slim SelectBay of your Toshiba Portege M400, computer laptop M405, S100 or Tecra S3. It is the ultimate portable storage for mobile users.

  Drive ultra slim and ultra light, fits perfectly in your Ultra Slim SelectBay of your PC drive slot, no additional unit to take on the road
  Dresser based on multiple drive in a compact design: DVD-RAM, DVD + RW, DVD + R, DVD - RW, DVD-R, DVD-ROM, CD, CD/R and CD
  Productivity:
  Backup of important files
  Easy access to CD and DVD based media
  Use for multimedia presentations
  Adapts to your lifestyle:
  Watch your favorite DVD movies
  Play music and games
  Create your own DVDs or music playlist
  Create CDs or DVs with ease
  Transfer data seamlessly between two discs, improve your productivity
  Reduce the time spent to transport and save files
  Slide-in simple, plug-and-play operation
  Includes drag ' n Drop CD + DVD3/B CLiP, Win DVD Creater 2 and the DVD-RAM driver
  Compatible with computer laptop Toshiba Portege M400, M405, S100 and Tecra S3

  Specifications

  Speed (Max):
  Read: 24 x CD-ROM, DVD-ROM 8 x
  Write: CD - R 24 x, CD - RW 4 x, 10 x HS CD - RW, 10 x US CD - RW, 2 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, DVD-RAM 2 x
  Compatibility: CD-ROM (read), CD-R(read/write), DVD - ROM (read), CD-RW(read/re-write), DVD-R(read/write), DVD-RAM(read/re-write), DVD-RW(read/re-write), DVD + R(read/write), DVD + RW(read/re-write)
  Dimensions and weight: 5 "x 5.5" x 0.4 ". 3.9 oz

  Hello

  According to the paper manuals s user for Portege M100 two drivers of optical discs are compatible with your Portege M100L:
  TOSHIBA SD-C2612
  TEAC DW-224TH

  So if you want to have good player get one of them.

• Tecra M4 or Portege M400: notice required

  Hello
  I plan on buying a tabletPC and close to 100% chose Toshiba. Prices seem to be ok. But I still don't know what to choose - Portege M400 or Tecra M4.

  The M400 is power supply newer batteries, lighter, longer, and I have a Core Duo cpu. However, I use programs like Photoshop, AutoCad, 3ds max, Corel and so on.

  Is that the Intel chip is sufficient for these purposes? The M4 has GF Go6600 GPU which I'm sure is ok.

  Help, please! Thanks for the tips!

  Hello

  I studied a bit in the internet and found some data about the M4 Tecra and Portege M400.
  It seems that Tecra has been delivered with a different hardware configuration.
  You can purchase the Tecra with CPU Intel-Pentium-M (Dothan) 760, 740, 750, 730 1.6 GHz, 1.73 GHz, 1.86 GHz, 2.0 GHz and 2 different graphics cards: nVIDIA GeForce FX Go6200 64 MB or 128 MB nVIDIA Go6600.
  Also, there are different sizes of HARD drive; 40, 60 and 80 GB
  The screen is 14.1 "(1400 x 1050)."

  The same thing on the Portege M400. It has also been configured with different CPUs:
  Intel Core 2 Duo (Merom) processor T7400, T7200, T5600, T5500.
  The graphics card is a bit slower because it s a graphics card memory sheared.
  But you know, if you're not a hardcore game player, so you don't need a graphics card performance. The size of the screen is a bit smaller. Its 12.1

  I think that if you like little notebook so the M400 is not a bad choice.

  But you know s of your choice and you must know what you want to buy.
  But I like more the Portege unit

• Portege M400 does not accept the hard drive built into the boot password

  First I assigned a 9 character long password BIOS via the security utility help my new Toshiba Portege M400 (M400-139) with Windows XP Tablet Edition.
  He asked me if I also want to use the same password "repeated" to cover the 22 or so (I don't remember) characters long password of HDD, and I said ok.
  Then, I removed the BIOS password. But couln can't remove HARD drive password.

  I then created a different password which has been long 1 character and removed, but the HARD drive password remained.
  When I rebooted the system, he asked me the 'HARD Word built-in disk '.
  I tried to enter both the 9 and 1 character long passwords, but it says not 'certified '. What should I do?

  Should I write tha password over and over again, until it reaches 22 or more characters?
  If this is the problem, then, the number of characters long?
  I also think that the keyboard layout mapping can be a problem.

  I have never changed the setting page, but maybe that the default value of the plant is different from a windows.
  But I used only numbers and letters of international standard.

  I need immediate assistance.
  All my work is interrupted.

  I put t know if you have inserted the right HARD drive password or not but the non-certified message said that the inserted password is certainly not correct.
  Someone said that the message uncertified might if poster if you laptop was send hibernation instead of the stop mode mode after the password has been set.

  But I don t think that this could be relevant in your case.

  One question; have you tried to delete the password for HARD drive via the password of Toshiba or in the BIOS utility?

  Please check if you can edit/delete in the BIOS because I found the info in the manual M400 you must use the BIOS Setup to modify, delete the disk HARD ot password to set the password master HD!

  The manual also provide information if you forget the user Toshiba HARD drive password will not be able to help you and your HARD drive will be rendered completely and permanently unusable! When save the HARD drive password stop or restart the computer. If the computer is not shut down or restarted, the recorded data (password) cannot be correctly included!

  So maybe that's a reason why you can not change the HDD password?  :|

  Greetings