Portege M400 problem with virtualization

Similar Questions

• Shutdown in Vista with a Portege M400 problems

  Hello!

  I have a problem with my Toshiba Portege M400 (do not know if it is a matter for the Council of vista or portege support plate, anyway). I installed Vista Express Upgrade a few months ago and everything worked fine for a while.
  But over the last 4 weeks, my laptop seems to have a problem when stopping down. No matter if she's just hibernates or shuts down completely, the computer automatically turns itself after being off for about 5 seconds.
  I have to use the switch to turn it off again (and then it stays off). Any ideas? I haven't changed anything and it could be a hardware problem, but my guess is that it has something to do with Vista ;)

  Thank you

  Alex

  Hello

  installed some software or tools/applications/updates? Sometimes, a small update can disrupt the entire system and preventing it from functioning. So, just check what has been installed and it may be useful to install the new bios, maybe update all drivers etc... Make sure that everthing is real and up to date.

  Welcome them

• Boot Portege M400 problem

  Hello world!

  I had this Portege M400 for nearly 2.5 years and never met with such a problem.

  When I press the power button / stop * HDD led light turns on, then WiFi and then suddenly the HARD drive off * and the rest in this way: (.) Eventually, the Toshiba logo appears at the same time. I thought that problem disc HARD just to know that after 90 degrees my laptop WHAT HDD led start flashing again. Eventually, Windows loads at startup animation it would 'safe' return to normal position and expected to start Windows.

  so, I suppose the problem is somehow related to the accelerometer, is it? I don't get these gels after Windows starts. Currently I have version 3.8 BIOS and installed Windows 7 Pro...

  It's really starting to annoy me - people look at me funny, as I switch my cell phone 90 degrees :-)

  Any advice would be greatly appreciated!

  Thanks in advance!

  Best regards
  Jovan

  Hello

  Maybe it has something to do with laptops HDD?
  Maybe the head of HARD drive cannot be moved correctly and the vertical position allows to get the drive moving head again
  Unfortunately, I've never seen such strange behavior for laptop and so I can give you a few personal suggestions.
  In my view, that the HARD drive should be checked at the first maybe the problem could be solved in replacement of HARD drive

  Welcome them

• Portege R700 - problem with fingerprints to connect on Win7

  I have problems with my new Portege R700 with fingerprint reader to log on Win 7 acount.

  I have digital fingerprints installation to the system via the Toshiba fingerprint utility. Several times I can wake up the Portege of sleep or turn it on, fingerprints from the BIOS is accepted, after which appears logon screen in Win7 and in some cases, I'm able to connect automatically to this account. In some cases just system is pending, it is not possible to login with the password. I restart phone, sometimes more than once.

  You can help someone? I have already several times removed, Setup still traces of fingers, I updated the utility and the new driver fingerprint - nothing does not.

  Hello Vava

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• Portege R500 - problem with roaming

  Hello

  I use the laptop Toshiba Portege R500. Computer works well, however I had a problem with the connection to the internet from abroad. I use Novaltel Moblink application and modem integrated - on the territory of the Poland, internet connection is working without problem, but abroad there is no link (tested in Czech Republic and Austria). Operating system - Windows Vista Business SP1. When the external modem (PCCard) and GlobeTrotter application is used, then internet woks without reservation.

  Any help will be appreciated.

  Jacek

  If I understand the problem, you are the Poland and this card doesn t work in other countries.

  What is your mobile card is activated for use abroad?

  For me it doesn t look like a laptop but problem the problem of the map.

  You contact the mobile service provider and ask for clarification!

• Portege M700 - problem with Dynadock

  I can not change the resolution on a screen connected Dynadock and cannot save the display settings of all - how to fix this?

  I have a Portege M700 running Vista Professional SP1 - mainly the machine is used as a desktop replacement, connected to a screen Viewsonic 19 "wide through the Dynadock DVI - when it is connected so I have the laptop screen is off and use only the Viewsonic at a resolution of 1440 x 900. I had been bothered by the fact that whenever the resumption of the screensaver, the resolution would drop down to some lower State (I was not able to identify the dimensions he thought he was using but probably 1280 x 800, the default resolution of the internal display).

  I tried to solve this problem with the technical support level 3 without success. I thought I was smart and try to install the Intel Graphics Media Accelerator Driver update that is located on the Intel Web site (if you're just trying to install this software, Vista won't let you, but if you unzip it and manually update the drivers it works). This resulted in the connected screen Dynadock is off completely - no signal! So I uninstalled the drivers, reinstalled the drivers Intel original, but now, I have no the ability to adjust the resolution on the Dynadock login screen - and it is defaulting to something that's not going to (too broad and not high enough)!

  I lived several cycles to uninstall and reinstall the drivers for the graphics card (Mobile Intel 965 chipset) and the Dynadock; I updated the drivers Dynadock with the latest download from the website of DisplayLink, tried all sorts of drivers for the monitors associated with DisplayLink, tried several restorations system (which have all failed, which was also quite disturbing but less than an immediate concern), etc. Through all this, there is absolutely no way to choose the correct resolution of the screen through the display properties (my choices are 800 x 600, 1024 x 768 and 1280 x 800), and even simply activate an additional screen translates to nothing happens - the new settings do not stay after hitting "Accept" or "OK". I thought that I had licked when I realized that I had to uncheck "Extend to this monitor box office" to screen internal laptop - indeed I was then able to choose 1440 x 900 for the Viewsonic and everything was good, but everything came back after reboot. Of course, now when I try to repeat, I am unable to uncheck this box not more for the internal screen (well, actually, I can uncheck, but when I hit "apply" or "OK" it simply gets selected again).

  All this comes after I spent weeks trying to get this machine to work with the port replicator, which also did not work - a problem that appears to be from an incompatibility with Vista display card drivers and the port replicator (would have been nice if it sales had told me that when I bought the thing, but I digress...)

  In any case, it seems, as it is a Vista problem, I've seen this question asked of other portable devices vista and displaylink other advice, but I know it's possible to have a working reasonably OK solution since I've had one before I went and it messed up trying to work perfectly. Serves me right for spend 3 k $ on a machine and expected that it works as described, I guess. If anyone has any ideas... my next step is probably a downgrade to XP Pro, and then if that does not work, I'm tempted to break into pieces. Or, if someone's figured out how to get the port replicator to work with a M700 Vista, which is actually a better option for me...

  -Tony

  Hello Tony

  It's a very long story, but I use Portege M700 with Dynadock DVI (PA3542Y1PRP) and have no problem at all. After reading your ad I tried changing all the display options and I didn t notice something strange. It works well.

  Read your ad I see you tried to install different things and I wonder not to have so many problems. The best solution for you is to install the new OS using recovery image. Do the clean install of OS and install later Dynadock Utility 2.3 c. be careful while installation is running and do not interrupt the procedure of facilities. Make sure that all software components are installed correctly.

  When you start installation Dynadock Utility Dynacock can not be connected. When you see the window where you will be asked to connect Audio device USB connect the Dynadock to the USB port of your favorite. I use the USB port on the back.

  I use the external display to monitor LCD 22 with a resolution of 1680 x 1050. In the settings screen is display number three and when I click on it I can set the resolution to the maximum level (native resolution). The image is perfect.

  I tried the same as you:
  -Set the external display as primary monitor (for computer laptop LCD was OFF)
  -J' have enabled screen saver and tested several times, but the resolution is always the same no changes at all the
  -With these settings, I rebooted the phone several times as well as the resolution was still the same no problem at all

  After reboot, I can see the image on the notebook LCD only, to the point where I have to write the password that I can see the same image on laptop LCD and external monitor. A few seconds later, the image is switched on external monitor only and it is the same thing you want to have. The resolution is the same again (native resolution). No change at all and all seems OK.

  At the end I've switched back to the LCD display only. It is also interesting to procedure. As a first step, you click on display number one and activate extended desktop. After that, you will be able to use the option to change the primary monitor. A little strange to me, but OK.

  So everything works well for me and for you I only see an option. Reinstall Vista, install new utility Dynadock (new installations) and test again.
  One last thing: do not connect Dynadock on different USB ports. Use always the same.

  Bye and good luck!

• Starting on Portege M400 problems

  Sometimes my Portege M400 won't start and crashes, but sometimes it does.

  This could be a software or hardware problem?

  The hard drive does not start and the battery to the fron of the Tablet icon remains orange.

  Thanks Mick

  Hello Mick

  It's really not easy to say what can be the problem. For each issue described by Word sometimes is not possible to give an accurate diagnosis.

  When your notebook crashes? OS at startup?

• Portege R700 - problems with video playback with resolution more 360 p

  I have this problem of video playback on the first day. While for example on YouTube, video resolution than 360 freeze while the sound is ok.

  I contacted Toshiba whereby I had a linke for the bios and latest drivers. After the upgrade question persists. Sometimes I get a green screen by watching the video flash as well. I guess it's a hardware graphics card problem. Any ideas? Thank you! (Portege R700 19 L, win7 pro 64)

  Do you have this problem in full-screen-only mode or in full and normal mode?

• Portege R100 problems with post CD RW

  I use Portage R100 with external CDRW/DVD player (model? is PA3352E - 2 CD 2). Extension is grateful as a CD-ROM. AHEAD NERO and other programs cannot see devices that are able to write discs. I tried to do what helps recomminded programm but I havn't receive any result. I use MS XP OS w SP2 and the reason for my problem according to MS HELP can be in SP2. Guies MS suggest waiting for the next Servies Pack that advertise in 6 months.
  I have no chance to solve my problem? And how?

  Thank you all.

  Hello

  Well, I put t know if it helps but you can try to update your old BIOS.
  I found on the Toshiba site, the newest BIOS update 09/30/05.
  Furthermore, please check the information for Microsoft Windows XP SP2 update for this device.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Portege R100: Problems with CD/DVD Lacie USB 2.0 drive

  Hello everyone, this is my first post here.
  I'll most likely be a regular here I come to buy a R100.

  I am having trouble with an external hard drive that I bought especially for the R100,
  It's a Lacie CD / DVD burner, model number: 300819EK.

  This unit can be powered by AC or by using the two usb ports.
  I use two usb ports.

  The R100 recognizes the Lacie, and in the Device Manager list, the drive is then
  in the list, but he is listed as a drive of Toshiba.
  I'm assuming that this disc of Toshiba external hard drive, you could buy for use
  with the R100.

  The Lacie drive works, but it seems preloaded the R100 CD / DVD
  pilots are contradictory in some way and is made using the player very touched and don't miss.
  He often gets 20% about a facility, then crashes.

  Is there a spare driver I can download that I can replace the toshiba
  drivers with?

  As if by having the Lacie 100% functional means there is obviously a
  How to overcome the problems.

  Hope you girls and guys can shed some light on this for me.
  Thank you.

  Hello, Larry

  You will be very happy if someone will be able to give you some explanations in this regard. I can tell you more: the fact is that this model is created and tested to work with Toshiba compatible external devices. Because of this, Toshiba built in all the necessary drivers in the operating system preinstalled. It should help the installation and also drive fast and quick recognition.

  This does not mean that you MUST use discs from Toshiba. Of course you can use what you want, but the only problem can be when you try to install the OS. Toshiba recovery image contains drivers for Toshiba drives and recovery procedure will work without any problem because the external sides will be immediately recognized.

  I recommend to visit the Lacie support page and check if you can find some driver it. Toshiba has nothing to do with it, if you use a third party product.

  Often, he gets 20% approximately of a plant then crashes sorry but I t did not understand what you mean with it and what you mean with 20%. Second part of your ad is very confusing and I really don t know what you mean.

  Good bye

• Activation of BitLocker on a Portege M400 problem

  I updated my BIOS to version 3.6 and I switch on the TPM on the computer module, but when I tried to turn on bitlocker encryption, I was told that the motherboard could not communicate with the TPM module.

  Anyone who manages to make it work?

  Hello

  I already posted a short statement of Bitlocker.
  I found this useful thread on Bitlocker here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23935&MessageID=87849

  You can use the Bitlocker without a TPM, but in this case only, the BONE volume encryption is available.

  Greetings

• Portege M400 gel with Vista - Solution!

  Hello

  If you have vista on M400 and the experience of freezing, just go to Intel and install the latest driver http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=2301&lang=eng

  It's really worth. I was about to return the machine and now I'm in heaven!

  Next time!

  Hello

  Thank you. It s very nice information.

  PS: I'll install Vista in the next few days on my laptop from Sam.
  I wonder I it will work.

• Portege M400-105: recovery OS installation problem

  I try to format my portege m400-105 with the recovery disk by pressing f12 and sellect dvdrom.
  When I try to format it then clicking it don't tell me no driver found why?
  Question: how will it format?

  Please help me.
  Thank you

  Hello

  Equip recovery CD/DVD-rom, and turn the unit off. Turn it back on and immediately hold down C.

  It works on this path?

• Re: upgrade Portege M400 cpu?

  Hello
  I'm looking to upgrade my portege m400-ez5031 with the fastest cpu, it can handle.
  It's now the centrino duo T5600 1, 83ghz.
  I think the best is that T7600 is possible?

  Jin

  I don't know if he can run T7600, but I think you should read your motherboard specifications:

  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Where is the creator of recovery on Portege M400 disk?

  I need to do a recovery for my M400 disc is not in the Toshiba Assist - Protect & fix. So where he's hiding?
  Any help would be gratefuly received, as it is driving me crazy.

  Hello Bob

  AFAIK Portege M400 comes with DVD recovery and Toshiba assist Protect & fix, you can find the shortcut for the creation of tools & utilities only. I know that Portege M300 comes without recovery media and user, it can create only, but not on the M400.