Fluidity tool display all layers while working with her?

Similar Questions

• I don't see the 'design' button while working with fluid layout, why?

  While working with the fluid RWD layout in dreamweaver:
  

  (1) I don't see the 'design' button, I can only see buttons ' Code, Split and living ", in Dremweaver CC, how can I get the preview of this design button?

  (2) and "Visual AIDS" is disabled, I mean I can't see the 'container' visually when you work in direct mode. So am not in a position to determine when and where to place the div

  Re: Is it possible to display the design view in the fluid grid pages?

• I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  -It used to work and for some reason, now it does not work

  Greetings, d_chiuch1104,

  There is one thing that I know that you need to check that COULD be your problem.  Open Control Panel (in Classic view) and click Folder Options (or, in Control Panel, click on appearance and personalization and then Folder Options).

  Open the view tab and make sure that "Always show icons, never thumbnails" is NOT checked.

  It would be good to hear from you as to whether that was the problem!

  GL - Bob

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 does support OpenCL and OpenGL?

  Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

  Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

• Help! Illustrator crashed unexpected when I work with her. Only a reboot allows, after abandoning the preferences. Who knows what bug this is?

  Help! Illustrator crashed unexpected when I work with her. Only a reboot allows, after abandoning the preferences. Who knows what bug this is?

  If we could, we could make a lot of money, solve problems.

  But unfortunately, we can not just from your description. Please give us the details.

  What version?

  What system?

  Third-party plug-ins?

  All corrupt fonts?

  What hardware is connected?

  You have a printer installed?

  Font management?

  What exactly were you doing when it crashed?

• Limiting errors while working with multiple connections

  I am currently evaluating Developer SQL and I'm looking for most of the features that allow connections several clearly distinct to avoid DBA errors when working with multiple connections in parallel.
  Currently, it seems that developer SQL provided these features:
  -Organization of folders in Explorer-> for example, we can create a folder per environment (DEV,...).
  -name of connection-> each user can define his own name. These aliases will appear in the tabs and the title of the main window when opening a connection.
  
  These features ar fairly limited if you compare with a tool like Toad, which used to associate colors with connections (good feature!) or define custom fields. In addition the database user is not displayed in the SQL Developer interface, unless we add in the name of the connection...
  
  Do you know if there are plans to improve these features in future releases of SQL Developer?
  Or, otherwise, it would be possible to quickly develop a plugin that can provide? (especially on the colors of connections)
  
  Thank you.

  Hello

  I opened the application, and you can add your voice to this. This isn't a feature that we can control, nor is it something that you can expand as it should be expelled from the underlying IDE. We requested a change in the IDE so that we can implement this improvement.

  Sue

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• Very slow / freeze while working with photos in Photoshop Elements and Canon DPP

  Suddenly my Windows XP has become very slow or crashes when working with photos.  I have Canon DPP and Photoshop Elements installed, and in the two following occurs: I can edit a photo without any problem but when I try to work with a second picture the system slows down / freezes.  It unlocks after a minute or two each time.  I tried cleaners registry check disk, Disk Defragmenter, virus, etc. etc. scans and no problems.  All other works very well and this problem started just out of nowhere.  Any suggestions or ideas will be greatly appreciated.

  Thanks John.  How do I disconnect from the internet?  I have a cable modem.

  ====================================
  I also have a cable modem and it has a button on top
  who's going to turn off/turn on the connection.

  If your modem does not have the button... you can
  Click on the "connecting to LAN" connection in the notification
  area of your taskbar and select Disable.

  If you go to... Control Panel / network connections you
  right click on the connection to the Local network and send a shortcut
  on your desktop. So, it is more convenient to right click...
  enable / disable...

  Good luck... John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite A200-196: can't get all speakers to work with the home theater sound Creative T7900

  I run windows Vista Home premium, on my Toshiba Satellite A200-196, and I have a creative T7900 7.1 System.
  I'm not all stakeholders to work. Only the woofer and two front speakers are currently playing a sound.

  The sound in Control Panel option gives me the options in addition to stereo speakers.

  I have no possibility to choose 5.1 or 7.1 speakers and I need to know do I need a software driver (all drivers are appearing to date), or do I have to change to another option, or buy an external sound card?

  I have only two input jacks, input microphone and headphone output. How can I get all stakeholders to work and achieve the home theater experience?

  Hello

  I Don t think that the sound card is capable of doing 5.1/7.1 since there are many takes longer then a "sound-output.

  If I were you, I would buy an external USB soundcard that is capable of doing 5.1 or 7.1 to offer you experience complete home theater.

  Another solution is not existing. Sorry mate.

  welcome them

• Qosmio G50 overheats while working with lid closed?

  If I work with the lid closed (i.e. turn on with the remote control) so that I just use two external monitors, the G50 will overheat or like other portable dockable, it's a very happy job like that?

  Does anyone know?

  Thanks in advance.

  Hello

  Why the Qosmio overheating?
  I want to say I put t see a link between overeating and closed or open lid

  The cooling fans are placed at the bottom of the unit and the air clear on the portable side so it s is not serious if the lid has been closed or not

  The laptop should not overheat

  Good bye

• Audio sounds bad after having worked with her

  I used to use Audacity for my voice recordings and working with the audio seemed to work fine, but now, when I work with the hearing, as I work with audio (noise suppression and compression), voice ends up sounding terrible, and sometimes the audio can get rough. I record with a blue Yeti Pro, if that helps. I just started using the program, I appreciate all the help I can get.

  To be effective, it is best to have background noise less than or equal to-42dB and song about riding 15/18 dB to get this clear separation expected of a piece.

  Look for the two second minimum deviation during your record that has just the inside noise in order to capture a sample (right click, print capture noise).  I usually record 10 seconds of the ambience of the rooms just for that purpose.

  Much will depend on your initial capture and settings will vary, and while the example below is a good starting point for tweaking from there

  It is preferable that you plan to use a log curve and add points of outline trace noise print to follow.

  Loosen reduction settings and use a small number of smoothing and transition width to avoid burrs survey results / aqueous or metal.

  As mentioned SteveG, using multiple passes in subtle steps works for many.  Experiment and let your ears guide you.

  Depending on the situation, its best, leaving a slight noise in and then try to delete everything and may degrade the singing or the creation of unnatural sound, abrupt transitions from the ground to the voice.

  Especially if you are going to mix in a bed of music or winds the end result as a file compressed on the net and that little extra effort is lost anyway.

  

• Error "Windows has encountered a critical error; He died in a minute, save your work,"while working with Microsoft Security Essentials.

  * - Original title - closing Windows?
  So, I had some malware on my computer and ran a test with Malware Finder thing (his play don't worry). It was about an hour when I decided that I should update my Microsoft Security Essentials. I updated and it is now protected. I decided to do a quick test on microsoft OS. It was as if 5 minutes when I got this window that says "Windows has encountered an error in cricical, he will stop in a miniute, save your work. Now, whenever I start my computer, this window opens. I tried in safe mode, pop new user, appears. I deleted all start up programs/disabled them. I can not remove the virus because I can't go two minutes without it popping up while I try to fix it. Help! PLEASE, I BEG YOU!

  Hello

  Method 1.

  Step 1. Disable automatic reboot to avoid unwanted restarts on system failure.

  a. when your computer starts up keep press F8 on your keyboard until you get the Advanced Boot Options screen.
  b. now, use the arrow keys, select Disable automatic restart in case of system error and press ENTER.

  Step 2.
  Start the computer in safe mode with network, and then run the Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If you think that all the activity of the virus, I highly recommend to run a Scan of Virus online.

  a. follow the link to start the free online scan: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  b. run the malware removal tool from Microsoft.

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  I hope this helps.

• Latency huge while working with the NI USB-6521

  Hello

  My testbend mounting is illustrated on Fig. 1, Fig. 2.

  Here are its features:

  • ' Simulate Signal ' block generates a Sawtooth signal with adjustable parameters - ampl, freq, offset of phase
  • the release of "simulate Signal" connected the driver to exit AO0 (block "USB-6521 AO0") of the device USB-6521
  • AO0 output is wired for entry AI0 of the device USB-6521
  • the output of the driver of the AI0 (block "USB-6521 AI0") entry is wired on waveform graph (blue line) and the entrance to the driver "USB-6521 AO0" (red line)

  Play with testbend do I saw 2 strange phenomena:

  • When I change some settings sawtooth ( ampl, freq, offset) latency is approximately 15 seconds
  • While the signal generated by "Simulate Signal" is perfect Sawtooth, out of "USB-6521 AO0" is not perfect... in other words, its shape is not always follow the source form (I also order by oscilloscope).

  Any comments welcome.

  Thanks in advance

  Pavel

  Fig. 1

  

  Fig. 2

  

  It is not supposed to be instantaneous. If you understood the basic arithmetic, you know that it takes 10 milliseconds to acquire and display the signal - that's what you're showing.

  To view several times, you will need to acquire more samples. Again, this is only basic arithmetic.

• The example of all do not work with IE8 and win7 64 bit environment

  It worked all right yesterday but this morning that I uninstalled the jdk and jre 32 bit 1.7 and reintall jdk 64 bit version 1.7 and missing invited the java environment! and I reintall jdk 1.7 32 bits, then the lack promt java disapper but the stage collapsed at a spining circle, while in chrome browser it works well at the same time.
  I am a developer java swing and exceited to javafx, new features, is a little frustrated that javafx appears to be so unstable.

  How to get started?

  You reinstall JavaFX runtime too?

  Looks like JavaFX Runtime is 32-bit and 64-bit Java Runtime.
  It's no wonder that this won't work because the libraries are not compatible. You must have matching runtimes.

  And if you launch it from browser and browser must be 64-bit to run 64-bit Java.
  Many 64-bit platforms still have 32 bits used by default browsers.