'Fn & F5' part-time work only

Similar Questions

• iPhone timer works only with iOS 10

  The other day I installed iOS 10 and since then I am unable to use the clock/alarm/clock app on my phone. The app seems to open very well, but block once it loads. It will allow you to pass functions possibly, but it seems that the only available function is the stopwatch. After about 60 seconds, the screen goes black, the "loading" wheel spans ten seconds, then locks phone entirely and asks for your password. Once you're back in the phone, you must close the application or the phone will continue this cycle every 60 seconds.

  Anyone familiar with this?

  Welcome Knpriester,

  Thanks for your post. I see that the clock app will not properly work after updating to iOS 10. This is certainly unexpected. I know that I rely on the application of the clock to wake me up in the morning. I'll be more than happy to help.

  To start I'd say forcing the clock app to close and restart the phone:

  Force an application to close on your iPhone, iPad or iPod touch - Apple Support

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take care!

• You don't you E-Print to work? Feel the air works part-time?

  Unable to get printer code? Printer keeps asking for the proxy server and proxy port. What are they and how to find them.

  My impression of air works part-time. How to fix it. (I closed made printer etc. - it solves the problem for a time of shooting)

  Hi rprasuhn,

  Thanks for the reply.  Try the following steps.

  I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select Network (IP) address

  6. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply you could get a fair warning select OK.

  Let me know how it goes.

• ToolBoxTools.addEventListener works only every second time

  Hello!

  Our layouts often enough by clicking on the tool 'page' in error, and it's happened several times, that it changes the size of the page without even noticing. Because there is no way to remove the tool from the toolbar (I guess?), I want to write a script, which displays at least a message that the page tool ("Seitenwerkzeug" in German) has been selected. Unfortunately, the event listener works only every second time:

  1 indesign begins > selection tool is active

  2. click on the tool page > message > tool page is active

  3. click on "another outil1" > "other outil1" is active

  4. click on "other tool2" > "other outil1" is active

  5. click on the tool page > nothing happens, page tool icon is active, but the 'tool2 another' icon is still active, too, and 'another tool2' is always on

  6. click on "other tool3" > "other tool3" is active

  7. click on the tool page > message > tool page is active

  8. ......

  No idea why this is?

  My script:

  #targetengine myToolListener

  app.toolBoxTools.addEventListener ("afterAttributeChanged", changeToolAlert);

  function changeToolAlert() {}

  If (app.toolBoxTools.currentToolName == "Seitenwerkzeug") {}

  Alert ("Message", "Title");

  }

  Exit(); I tried with and without this!

  }

  At first, I tried to use a confirmation message instead of an alert, who had the same problem and I thought it would be because the change does not work... but it seems that I can't yet work with information without something to 'crash' in the background?

  My previous confirm function:

  function changeToolConfirm() {}

  If (app.toolBoxTools.currentToolName == "Seitenwerkzeug") {}

  var confirmDialog = confirm ("You want to activate the page tool?", true);

  {if(!confirmDialog)}

  app.toolBoxTools.currentTool = UITools.SELECTION_TOOL;

  }

  }

  }

  
  

  I really hope someone has an idea

  Best,

  Anke

  Hi Anke,

  The problem, I think, comes from the fact that the Page Tool selection event (which you listen via afterAttributeChanged) needs time to complete. Since alert() and confirm() education gives focus to a new modal window before the event lifecycle is completed, the GUI becomes unstable, state icon described is not properly restored and your event management does not.

  One way to solve this problem would be a temporary queue listener IdleEvent once the Page Tool selection event is taken. In other words, we do not start one any modal dialog box as long as the GUI is refreshing.

  Something like this:

  //====================================================
  // PageToolDisclaimer.jsx
  //====================================================
  
  // Should be useable as a startup script, no #targetengine required
  // NB - MutationEvent is known to create a global 'evt' variable
  // so we don't seem to need a persistent session engine here :-)
  // That's why the active script File is used as the event handler
  
  (function(/*File*/EVENT_HANDLER, /*str*/TASK_NAME, /*uint*/TASK_TIME, /*str*/PAGE_TOOL_NAME)
  {
      var t;
  
      // Installer
      // ---
      if( !(t=app.toolBoxTools.eventListeners).length )
          {
          t.add(MutationEvent.AFTER_ATTRIBUTE_CHANGED, EVENT_HANDLER);
          return;
          }
  
      // IdleEvent handler (--> confirm)
      // ---
      if( (t=app.idleTasks.itemByName(TASK_NAME)).isValid )
          {
          t.eventListeners.everyItem().remove();
          t.remove();
          if( !confirm("***WARNING***\rDo you really want to activate the page tool?", true) )
              {
              app.toolBoxTools.currentTool = UITools.SELECTION_TOOL;
              }
          return;
          }
  
      // PageTool event handler
      // ---
      if( ('evt' in $.global) && 'currentToolName'==evt.attributeName && PAGE_TOOL_NAME==evt.attributeValue )
          {
          evt.stopPropagation();
          app.idleTasks.add({name:TASK_NAME, sleep:TASK_TIME})
                .addEventListener(IdleEvent.ON_IDLE, EVENT_HANDLER);
          }
  })(app.activeScript, 'WaitPageTool', 400, app.translateKeyString('$ID/Page Tool'));
  

  Hope that helps.

  @+

  Marc

• Modules of working only once

  It has been some time now that I noticed my addons not working not not on Mozilla TO in Ubuntu. Addons are installed properly and, indeed, they appear when I use mozilla sync in other computers.

  Today I tried the suggested troubleshooting here https://support.mozilla.org/en-US/questions/982460
  It works only once. I can install my addons again, but as soon as I close firefox and reopen the addons disappear from the top bar and the customization window. Even when I try to change preferences for Ghostery I get only blank a screen so addons are absolutely not working in Ubuntu

  Note that the OP is using the developer edition (39 Firefox) and not the regular version.

  Have you checked for problems caused by one or more of the extensions that may not be fully compatible with OF?

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Equium A110-233 stops using the WiFi and the fans work only 3 sec

  I bought an A110 - 233 20/09/06. It works very well for about 1 hour then it interrupts the communication via the wireless network connection status States he is always connected, sometimes but not always the configuration window indicates that the without wire is cut and I should turn it on at the bottom of the window (there is lit) processor Intel Pro.

  I brought the world PC waiting for a replacement but I had to sit for an hour trying to reproduce the error, we couldn't go wrong but I have discovered that it does only when running on the network.

  Cooling fan only works for 1-3 seconds at a time, is it possible to increase this number.

  Any help would be appreciated
  Bob

  Hello

  If you want to change the properties of cooling module you must do in the standby power settings.
  You should know that the energy saver uses different modes of consumption. The laptop is using another mode of energy if the AC adapter is plugged and another mode of power if the laptop works only with the battery.
  On the basis of energy saver menu, you will be able to change the method of cooling. This option controls the fan.

  It is not easy to solve the problem of WLAN communication. I mean that there is no general solution. Additional it is not easy to solve because the issue doesn't happen always, but sometimes only. Perhaps the intensity of the signal is sometimes lower and therefore, the configuration software WLan Intel reports that the wireless network is turned off.

  In addition, you should also check the Wlan card properties. You will find that the properties in Device Manager-> right click on the wireless network card.
  Here, you must select the Advanced tab.
  You should find a few interesting options such as energy saving (disable) or the strength of the signal (enable).

  In addition, you can try to update the WLan driver. Maybe a new version is available.

  By the way: you should also know that some 3rd party application could have a bad influence on WLan communication.

• Lenovo Vibe X 3 works only if the prosecution so disconnected it out

  Hi my Lenovo Vibe X 3 works only when it is connected to the charger, so disconnected mobile switches off the coast. I took it to the service center and it's under warranty they replaced the battery free of cost. But the problem persists. Please suggest any help is very appreciated.

  Back to the service center to let them check again. Get the receipt of service that you received the last time you went there.

• I used numbers for a long time, but only make spreadsheets base.  With the latest updates, I couldn't change my information.  What Miss me?

  I used numbers for a long time, but only make spreadsheets base.  For about a year and with the latest updates, I couldn't change my information.  What Miss me?

  Hi Deb,

  There not really enough information in your message to help you. How things don't work, exactly? Is there any alerts or messages?

  Quinn

• Satellite A300D-155 - camera works only 2 seconds

  I have problem with the camera.

  Whenever I start it, it works only 2 seconds, and then the image is black. The blue indicator light is all the time. When I start properties even change nothing, photo appears again. Worse still when I call someone, I can't help.

  What should I do?

  Have you updated the driver for the camera and looked for a BIOS update?
  Check this on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It's strange, but I think that an update of the driver should help.
  Perhaps more programs try to use the camera. Select this check box.

• HP Pavilion x 2: computer hp laptop pavilion x 2 works only when the Tablet is removed from the keyboard

  Hello

  My 3 year old hp pavilion x 2 removable 2 in 1 touch screen works only if detached from the keyboard.  It has been for the last couple momths stop without warning whenever it was moved slightly while attached to the keyboard. Now it doesn't work at all and stops as soon as I connect it to the keyboard. Everything else works fine. Any help is appreciated. Thank you.

  Pat

  Hello @pmm25,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the problem of keyboard and wanted to help you!

  Given that the question seems to be hardware related, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photoshop on laptop / after effects at the same time working Post Office?

  Can I use photoshop (cc for teams) on laptop / after effects at the same time working Post Office?

  Hello

  You can install it on as many machines as you want.  All the facilities that you might have, and only two of them can be in a State of activation (signed in).  These two active machines you can only use software subscription on one at a time.

  You can also check:http://www.adobe.com/legal/licenses-terms.html

  Let us know if this helps!

• DeskJet 722C works only with Windows 7

  OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

  My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

  I wanted to post this in the hope of saving someone money, time and frustration on the other.

• Buttons work only once or twice

  Hi guys, I'm still new to Flash and I really need help. Here is the story:

  so I do a simple digital comics right now, that shows one or two signs/pictures/drawings at a time with only 3 buttons to navigate (a next button, an exit button and a page selection button). Here is some info:

  -J' use CS6

  -J' I use simple tweenings for each photo (fade in/out, queries, etc.)

  -J' have it will publish in 2 formats, .exe and .apk for android

  -J' have 7 scenes, 1-6 for the main comic and scene 7 for the selection menu of page (within a clip)

  -I only use video clips of 2, one for the intro animation and another for page selection menu I mentioned above

  -because I'm still a noob, I always use excerpts of code (sorry)

  -J' I mostly only use these code snippets: stop at this image, click here to go to frame and to play, click here to go on stage and play.

  -for the exit button, I use this code:

  button_e.addEventListener (MouseEvent.CLICK, fl_MouseClickHandler);

  function fl_MouseClickHandler(event:MouseEvent):void

  {

  fscommand ("QUIT");

  --utiliser use for the next button, copy the following code:

  button_1.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_3);

  function fl_ClickToGoToAndPlayFromFrame_3(event:MouseEvent):void

  {

  gotoAndPlay (frame number);

  }

  for the page selection button, I use this code:

  b_page.addEventListener (MouseEvent.CLICK, fl_ClickToGoToScene_40);

  function fl_ClickToGoToScene_40(event:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "scene 7");

  }

  Now, here's the problem:

  The page selection button worked fine initially. Then I click on the next button several times (lets say, from page 1, stage 1, I clicked the next button several times until I got to page 6, scene 2). Then I click the page selection button that opened the clip. Inside of this video clip is several buttons another, each of them takes me on different pages. For example, I clicked on a button linked to page 7 (inside the scene 2). Furthermore, the code goes like this:

  b_7.addEventListener (MouseEvent.CLICK, fl_ClickToGoToScene_3);

  function fl_ClickToGoToScene_3(event:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (500, "Scène 2");

  }

  Still no problem detected. Then I continue to click the next button to read the rest of the comic strip. At this point, the page selection button (and the exit button) has stopped working. Clicked on it so many times and nothing happened. So, just like what I wrote in the title, it does only once or twice.

  Any suggestions?  (I wanted to download the .fla so you guys can take a look, but the size is too much )

  Screenshot:

  http://S25.postimg.org/azarwqvzj/screenie.jpg

  Thank you!

  put the button of your first scene on its own layer at the beginning of the stage and set its name.  extend his chronology up to the end of the scene.  test.  all the problems?

  If not, add additional keyframes in the layer of the button according to the needs of your project, making sure NOT to remove the button no keyframes.  test.  all the problems?

  If this is not the case, do the same for the other buttons in the other scenes.

  If you want your button to NOT appear in some frameworks do NOT for this key frame.  set its visible property to false or using removeChild.

• vcbMounter works only once

  I use the following commands to mount the files from a virtual computer to back up these directories:

  vcbMounter h esx-mgmt - u secretuser - an ipaddr:file1 - r S:\secretdirectory\file1-files t file secretpassword Pei - san m

  Then the backup application creates the backup. Once the backup is complete, the following command is executed:

  vcbMounter h esx-mgmt - u secretuser secretpassword Pei - U S:\secretdirectory\file1-files

  This procedure works only once. When I run a second time, I get the following error message:

  ~ ^{Error: did not find VM specified by ipaddr:file1} ~.

  Also vcbVmName no longer works.

  vcbVmName h esx-mgmt - u Administrator PEI s password ipaddr:file1

  No match found VMs.

  "Tip: If you are looking for a machine virtual address DNS IP/name cannot succeed if the virtual machine is turned on and running VMware Tools or is listed in the file cache VM name specified using the"

  -c"option.

  Workaround for the time being, I have found is to connect to this server from file1 and then close again. After this process, I can still make a backup.

  Any suggestions?

  Its a bug between VMware Tools and VCB. Check out this KB->http://kb.vmware.com/kb/1008709

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".