You don't you E-Print to work? Feel the air works part-time?

Similar Questions

• DeskJet 932C, you can print with just replace the black ink cartridge?

  My question is basically simple.  The printer DeskJet 932C can operate with only black ink?  Color ink was empty for a while now, but the printer kept working, printing in black and white.  Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge.  The problem now is that the printer will not print not even black and white.  Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?

  Thank you in advance!

  Michael Sponable

  Hello

  Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).

  Kind regards.

• Help - why print sequence is off the air?

  Hi all
  I have experimented with a copy of the help system a customer at the same time RH7 w/packer and the RH8 trial, generate output for the help of AIR format. After generating & the .air package and look a new help file .exe, I point out the following: click on the drop down next to the icon print and three options are listed (print this page, the sequence of Print, print all help). Whatever the selection below, print sequence is always unavailable (gray). This is the case when I generate with both versions. Did I miss something in the settings?
  Thank you
  Katie
  
  Katie Carver
  Senior technical editor
  Doc-to-You, LLC

  Thank you, Peter & Rick and sorry for posting and before disappearing! (Bill Murphey... begin to solve the problems and a higher-priority task inevitably lands in turn moments later.)

  Rick, your explanation was very helpful to ensure that I had missed something. I didn't, but for some reason, compiling the WebHelp to a different folder did the trick. (I had been doing the active boxes coming did nothing even if I was selecting the subjects that were in the middle of sequences to browse legitimate.)

  Now that I have compiled the WebHelp to another folder, browse sequences work. I ran the new AIR Conditioner (overwriting my existing .air file), and the printing sequence feature also works.

  Thanks again for the troubleshooting help and have a great day!

  Katie

• Photosmart B209a can you overried printer function? use the scan only?

  I have the Photosmart Plus B209a model installed print head is not intended for this printer, or is damaged. Refer to the Doc of the printer. Now, I have done this and cleaned ect. So, assuming that is damaged. I called to get this part and OMG! I might as well buy a new one! $85.00 and I did. My question is can I substitute the information of the printer and use the scan function again?   Thanks for any help!  Michael

  Unfortunately, you can not.  If the printer is in an error state, it locks you out of all the other functions of the printer.  I'm sorry.

• printer will work if the color cartridges are ink

  I have an Officejet 4620. My computer says all the ink cartridges are out of ink. I can always print in black. I need to replace the color cartridges?   The printer uses individual cartridges for red, blue and yellow cartridges. Color will be printed in blue and yellow only, so I guess there is little color left.

  I usually do not need color copies and I have another Copier.

  Hello @Connsu,

  Welcome to the Forums of HP Support!

  I would like to help you today with your color cartridge application today. Because your printer uses four cartridges: HP 564 black, HP 564 Cyan, Magenta 564 HP and HP 564 yellow, if one or all of these color cartridges are exhausted replace them to continue using the printer. Your HP Officejets ink system is designed to print when have all ink cartridges. A little ink in each cartridge is used for maintenance and maintenance tasks completed by your printer to keep the print head system in your printer in good working order.

  The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the printhead is not able to perform regular maintenance, due to depleted cartridges, there is a chance that the mechanism of the print head gets dirty. If the printhead is damaged in any way a whole unit replacement may be necessary. For more information about using ink please click here.

  In the future, if you mainly print in black from the computer, you can set your printer driver to use black ink only. Normally when you print from your computer files will be sent to your printer as "images". If your printer "thinks" it prints an image file that ink color will be used to enrich the black ink. If you don't want that to happen, you can enable grayscale printing option.

  • How to set grayscale in Windows:
  1. Click on the Start menu
  2. Click on devices and printers
  3. Right click on your printer and select Printing Options
  4. Click on features or Advanced
  5. Select the Grayscale dropdown and replace Black Ink only
  6. Click apply and OK

  If you ever want to print in color that you just open the document to print, click Properties in the print dialog box and change black ink only on OFF. This setting only will change to print one job and will return to black ink only for future jobs.

  • How to set levels of gray on Mac:
  1. In the software application, click print
  2. Select your printer
  3. Click Paper Type/quality menu
  4. Click the triangle next to Color Options
  5. In the color menu, select Grayscale or black & white
  6. Select the printing black only ink cartridge
  7. Click print

  Please let me know if the information provided solves your color cartridge problems. I look forward to hear from you!

• LaserJet P1005: LaserJet P1005 unintentionally print several copies after the decommissioning of 10 of Windows to Windows 7

  My LaserJet P1005 trustworthy priinter was perfectly printing for a few years on my HP TouchSmart 300 running Windows 7 and connected via USB1.  I have upgraded to Windows 10 for two weeks before deciding that he was turning too slowly.  Subsequently, I have downgraded to Windows 7.

  Since the downgrade, the printer has been printing several copies of all documents (eg.  Word, Excel, Web pages).  He prints a copy, waiting (the State indicates a copy pending) and continues to print 3 or 4 future COPs..

  So far, I have tried the following:

  1 deleted and reinstalled the printer P1005 driver.

  2. guarantee that no multiple copies are selected in the options of the software and a printer.

  3. you click Printer Sharing tab in the printer properties.

  I know that's not a printer for the State of the art, but any suggestions on my printer P1005 back to normal would be greatly appreciated.

  Tom

  Hi @Amoeba,

  Welcome to the Forums of HP Support! I see by your post that the printer prints multiple copies of the same document. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try to clear the record of spool and restart the spooler to print, see if this will help, clear how current Print queue in Windows Vista & Windows 7.

  Please try the steps listed in this document, if the problem persists, HP printers - Print Jobs stuck in the print queue (Windows). They should help this situation. What were the results when you ran the Print and Scan Doctor?

  I used this document to the network printers, you can try it to see if it will help with the USB connection, HP LaserJet Pro P1102w and printers P1606dn - printer continuously prints the same Print Job after it is installed on a network.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Printing of documents on the Internet

  I have a HP Photosmart C7280 All In One Printer that will not print from some web sites... for example: print not boarding the Air Canada, revenues of the Kraft Web site, Web site online banking transaction confirmation.  Operating system is Windows Vista 32-bit, IE 9.

  Thank you!!  I had already tried some suggested solutions by the spent with not luck... tried the suggestion to turn off protected mode in the options of internet security... did it and I am now able to print from two internet sites that I was unable to print from and hope for successful even when I need to print boarding pass on the Air Canada website.  Thank you, thank you thank you!  It is a very good site.  Definitely will use it again when and if a problem occurs.

• having problems become my printer to work after you download the compatible driver loading. Also I can't open a Web site from a link

  2 problems

  1. always problems to get my printer to work after you download the compatible driver loading.  I have a HP7660 and was instructed to use a driver for HP 5600.  Printer still does not print.
  2. when I go on a website of my e-mail address, Web site opens, but if I click on a link in this site open, the connection is not open.
  Any suggestion would be appreciated.  Thank you

  In regard to # 2 have a look here.
  For hyperlinks doesn't work does not (usually in email)

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310049

  The printer will print even a test page? Have you tried that?

  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• When you use print selection in Firefox 12.0, it prints whenever the selection is on the page (on paper) instead to the top of the page (in paper).

  When you try to use the print selection, printing starts in the location it starts as on the web page. For example, if it is down half way down the webpage, it starts halfway to print on printer paper. Then continue to another document. This only happens in Firefox, not other browsers. It makes me really want to change the default browser so I don't have to keep switching to print correctly. I tried Print Edit plugin, but it is a lot of time to do something that should be simple.

  Yes, the functionality of the print selection was twisted several times in recent versions. It was very broken in Firefox 11 and the fix has exacerbated the problem of the position of the selection moves to the top of the page (which has a long history, but is worse now).

  Workarounds

  I agree that the add-on Print Edit, which allows very fine control of the elements on the page, is not the best solution for this problem, because you often click on number of items for the same selection.

  The add-on Nuke anything that improved , has the ability to delete everything except your selected page text. Then you can print normally (i.e., without choosing the bubble of selection). I see not a feature cancel it, so you need to reload the page later to continue working with her.

  Some screenshots illustrating this use will appear below this post.

  (Note: the wire earlier How to get selection impression at work, page 2.)

• How can you post print on a HP 7510?

  How can you post print on a HP 7510? I don't see normal 2 x 2 or 3 x 3. I use
  Windows 7. Thanks, Sam

  Hi Sam,

  The characteristic Poster printing has been abandoned for a long time and is no longer included with the driver.

  Although it is not provided by the printer driver, you can use another printer driver in order to try to get the feature works as follows:

  1. In the Windows taskbar, click the Windows icon ( ), type control printers in the Start Search box and press ENTER. The Printers window appears.

• Error in the printer I don't have correct access codes to print on the printer to work

  Original title: impression of the printer

  Hey,.
  I work in an office with my personal laptop, the Office has a network, Xerox Workcentre 7845 printer and it was connected to my laptop that allows me to communicate with the printer. However, the printer requires an access code to be able to print because it is shared between the different offices in this building. I have the access code, however, every time I try to print documents it prints an error message saying that I don't have the appropriate account codes. The problem is that I was never prompted to enter access code. How can I get invited to enter this code, so I can start printing? Thank you

  Hi Albert,

  I suggest you to contact the network administrator for your network and check. If the network admin is unable to find the solution, then you can post your request in the TechNet Forums, which is the best place for these issues.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

  Hope this information helps.

• I use Photoshop CC and I have problems to use the scanning feature PLC culture and the strraigten.  Other printing features work within the progrram, but no connection when I use don't automate.

  Am I missing a configuration of PLC to allow me to crop and scan several photos?

  With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.

  Help.

  [email protected]

  VIC

  I plugged a usb cable and I was able to use the WIA import feature and

  the menu of the controller,

  He gave me the opportunity to select the printer and scan using the automaton

  function.

  When I removed the cable, it would not recognize the printer scanner in the

  Wireless mode.

  I tried to restart the system, no luck.

  In fact, when the cable is removed, the function to automate is

  "grayed out" which would explain why it cannot find the scanner.

  Any ideas?

  VIC Ouellette

  K1CGI... QRZ?

  In a message dated 12/09/2015 11:41:18 eastern standard time,

  [email protected] wrote:

  You talked

  by [email protected]

  (https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I

  problems to use the scanning feature strraigten and the cultures of the automaton. Another impression

  features work within the progrram, but no connection when I use don't automate.

  in Adobe Community - view [email protected]of reference for you

  (https://forums.adobe.com/message/8274458?et=notification.mention#8274458)

• Why you don't put a "missed call" icon on the status bar?

  Hello and sorry for my English, I hope you understand me.

  Why you don't put a "missed call" icon on the status bar for example next to the wifi icon?

  The problem is, I missed a lot of calls, because I don't see a for example missed call when im listening to music or when I use the maps in my car and my iphone is always turned on. I often go out to my car for 3-5 minutes, because I work in the service of delivery. When im not in the car and someone calls me, I can't see it when I'm back in the car. The missed call is in the home screen on the phone visible (visible?) icon.

  Sometimes, I have 3 or 5 missed calls, my wife is angry about this, my patronized too, they call me twice every time, or I have to watch every time every 5 minutes on the home screen the phone icon to see if I have a missed call.

  The problem is every time when the iphone is still on and I not always in the middle.

  We are regular users like you

  Provide feedback to http://www.apple.com/feedback

• Cannot update 3,010 FF.; Downloaded 3.6: impossible to copy in the app folder "the operation cannot be performed because you don't have sufficient privileges for some of the itemss.

  I had FF 3.0.10 for two years. My preferences are set to automatically check updates, my for a reason, it apparently never worked. I am the administrator for my Mac and have read/write permissions. The manual "check for update" under the menu help is disabled and will not work. " I tried to reset the permissions, quit and restart several times. At a given time, the window ' check for updates ' seems to be enabled, but froze when he started the download and came back to grey again. I tried to download 3.6 on your site, but when I try to drag FF in the app, I get a message that says "the operation cannot be performed because you don't have sufficient privileges for some of the items. Through it all, I noticed that my download folder is gone from the dock on my screen

  • Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  • Trash the current demand for Firefox to do a cleanup (re) install.
  • Install the new version you downloaded.

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• can quicken 2007 run on El Capitan (i.e., os 10.11)? I have one currently using Yosemite and you want to update without losing the use of Quicken 2007. I don't like the new version of Quicken.

  Can quicken 2007 run on El Capitan (i.e., os 10.11)? I have one currently using Yosemite and you want to update without losing the use of Quicken 2007. I don't like the new version of Quicken.

  Join the club of those of us who don't like Quicken 2015 or 2016 Quicken; even if I bought it for a 40% discount offered by Intuit!  I was just disappointed by Q2016 compared to Quicken 2007!

  If you have upgraded to the 16.2.3, version it will work well in El Capitan!