Focus of the window resets after using PUT

Similar Questions

• I bought photographer pack 1 year subscription on the basis of the window, but after I followed the step creative cloud load, I can not install the full version. He said to download trial version. I use window 8.1. How do I make.

  I bought photographer pack 1 year subscription on the basis of the window, but after I followed the step creative cloud load, I can not install the full version. He said to download trial version. I use window 8.1. How do I make.

  Please try: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

• Hi, is it possible to restore the synchronization data after accidentally putting sync key? I still have an old key synchronization. Thank you

  Hi, is it possible to restore the data synchronized after accidentally putting synchronization key a day ago? I still have an old key synchronization. Thank you

  Sorry, when the sync key is reset data synchronization on the server are deleted.

  Your data must remain on other devices that use Sync before you reset your sync key, that data is not disabled when the sync key is reset.

  Now, if you had only a device running on this account synchronization and you reformatted this device, you have made a fatal mistake by resetting the sync key; There is no way to recover this type or user error. Sync was not designed as a media set in itself, there is no backup of data synchronization server or a way to restore a mistake as the synchronization key reset.

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• Firefox frequently loses focus of the window

  It seems that Firefox frequently loses focus of the window when I opened a new page. It can be a bookmark, a link open in a new tab using CTRL-click left or whatever. The following scenario always translates into the window loses focus (for me).

  1. Open Firefox.
  2. Open this link and save it.
  3. Close, and then reopen Firefox.
  4. Open the page just a bookmark using the bookmarks list and do not touch the window.

  I read this page a day, so when I launch Firefox and open the page, I click on it in order to scroll, etc...

  Firefox 13, Windows 7 Home Premium 64-bit

  I wish this site had 'Preview' for its positions. Geez Louise.

  This can be caused by a recent update of Flash 11.3.

  See:

  • https://support.Mozilla.org/KB/keep-Flash-up-to-date-and-troubleshoot-problems
  • https://support.Mozilla.org/KB/Flash-crashes-or-does-not-load-Firefox-13
  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  You can also try 11.2 Flash you can download it via this link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe

• How to get a handle to the window to screen using just group id and the id of the window?

  Hello

  We are trying to develop a video application, and we use ForeignWindowControl to display the video on the screen.

  We have those ForeignWindowControl declared and defined in a QML file that appears as needed.

  Using the CameraAPI, we are able to get local video displayed correctly on the local video ForiegnWindowControl. For this we have just the window group id and the id of the window api camera and it automatically configures the window newly created by the camera to the position API and the size defined in the QML file.

  However, this is isn't the case with the video remotely. Since there is no method/function similar to the createViewFinder of the camera api, we need to create a new window of ourselves that goes under the Group shared by the ForeignWindowControl remotely, using screen_create_window_type and set all the required parameters.

  To view the video, hard-code manually the position and size of the newly created window so that it corresponds to the position and the size of ForeignWindowControl remote in QML file and is displayed correctly.

  My question is how to find the ForeignWindowControl using just the group id and the id of the window? the way in which the cameraAPi done in-house?

  Any help would be appreciated.

  Thank you.

  There are 3 ways to associate a window with a ForeignWindowControl.

  1 tell the ForeignWindowControl to expect a window with a given windowId.  Then after that libscreen allows you to create your window with the same windowId, use screen_join_window_group() to adhere to the same group that uses the FWC.  The FWC should automatically capture this event and associate the window itself.  This is how the camera it.

  2. call the bindToWindow() of the ForeignWindowControl method to associate the FWC a particular windowId/groupId.  Similar to the #1, but doesn't seem more useful if you create the FWC after the window of the screen has been created.

  3. call the setWindowHandle() of the ForeignWindowControl method.  Similar to the #2, but instead of using windowId/groupId, you spend just the actual handle.

  See the FWC docs:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__foreignwindowcontrol.html

  If you have created the window, you can use one of the 3 approaches.  If the window has been created in a different process (eg. mm-engine rendering, or photo-service device), then generally #1 is the approach you would use.

  See you soon,.

  Sean

• How can I get rid of the razor tool after use.

  I am a new user.  I can't get rid of the razor tool after use.  Help

  Press a to return to the normal cursor. or use the tool window.

  

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• Lose the FTP connection after you put the computer to sleep

  I usually work in Dreamweaver on my Macbook. However, if I'm working on a Web site and decide to stop for a while (it's how I closed my Macbook), everytime I open my Macbook again, so lost FTP connection. Sometimes it comes back after a long period of time, and other times I can do return disconnection/reconnection airport several times. But most of the time, I just closed Dreamweaver and reopen it. If I do this, the connection works perfectly again.

  Does anyone know how to avoid to have to close and restart Dreamweaver in order to maintain the FTP connection after having put a Macbook to sleep?

  The FTP queue time is set by your web hosting provider.  I don't think DW has mechanisms in place to send empty commands to keep the connection alive, and even if it did, it would take the computer to be operational.  You shouldn't have to restart DW well in order to get a connection.  Simply by clicking on the login button in the files panel should do the trick.

• Cannot get on the Windows Update site using firefox. It keeps saying that the connection was reset

  Original title : Could not get the update of windows

  I use firefox as my web browser and I can't on the Windows Update site, it just telling me that the connection was reset.  I click on try again, but just showing the same thing please help

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336> [ignore the title, etc.], reject modes and then AGGRESSIVE and pop-up troubleshooting automated, then run difficulty he 50202 in DEFAULT. [Ignore warnings "Not recommended", etc.]

  2. restart & test.

  Full disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP)

  UTC/GMT is 16:46 Tuesday, April 24, 2012

• Duplicate songs in windows media after using the Zune software

  It seems that every time I have load songs on my zune since the zune software device, it duplicates the song 2 or 3 times in the windows media player. Any ideas on how to avoid this?

  Hi Fred,.

  I understand that songs duplicate your Windows Media Player when you try to transfer songs from the Zune using the Zune software. I understand the inconveniences caused to you and I suggest you try the following steps to solve the problem.

  Do you have an error message when you transfer songs to Zune?

  You might face this problem because the changes made to the Zune software settings, I suggest you to try the steps provided by Marc A follows a link and check if that helps.

  http://answers.Microsoft.com/en-us/musicandvideo/Forum/xboxmusic-zune_software/Zune-collection-duplicates-all-songs/9b5daece-811F-4e43-9a08-bd24745db6a9

  If the problem persists, I suggest trying the following steps and check.

  Method 1: Clear database of Windows Media Player cache files.

  To do this, follow these steps:

  a. exit Windows Media Player.
  b. press the Windows key + R, type %LOCALAPPDATA%\Microsoftand then click OK.

  c. Select the Media Player folder, and then delete.

  d. restart Windows Media Player.

  Method 2: Delete the Windows Media Player database and check.

  a. exit Windows Media Player.
  b. press the Windows key + R, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.
  c. Select all files in the folder, and then click delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Forms10g + JRE: minimize the window IE after login

  Dear professionals,
  is anyway to minimize program window of internet explorer (or firefox) after the logon user for the application (except manually, of course :))?) We use JRE rather Jinitiator and property separate_window = true. Because users sometimes accidentally close opening IE windows, so they close asked - I want to minimize those risks.
  Thanks in advance,
  Adnan

  Basically there is the

  htmlBeforeForm
  

  and

  htmlAfterForm
  

  Settings in the formsweb.cfg where you can add additional html and JavaScript. Just Google how to minimize a window via JavaScript and put it in the htmlAfterForm

  This will reduce the browser window when you load your forms application. If you want to run javascript on certain events (for example in a trigger WHEN-BUTTON-PRESSED) you can do it with

  web.show_document
  

  Just search here on JavaScript forum and take a look. I'm sure you'll find a starting point. Of course if you have trouble, or something is not clear for you feel free to ask :)

  see you soon

  P.S.: implementations of JavaScript differ between browsers, I can assure you of headaches; What workes in IExplorer does not work in Firefox and vice versa. If you encounter problems with this please add versions of full browser as well as this material certainly in this case.

• You are able to load the plugin settings after that put 10.1.1 to level?

  After the last update of GB that I am not able to load the settings of plug-in via .pst files - they are greyed out in the standard dialog box - and they are still same after copy them in the standard folder (under /Music).

  I am able to save the new setting, but does not load them via the next-> load menu in the window of the specific plugin parameters.

  Any help/feedback would be apreciated! Thank you!

  -Claudio

  El Capitan 10.11.4

  After the last update of GB that I am not able to load the settings of plug-in via .pst files - they are greyed out in the standard dialog box - and they are still same after copy them in the standard folder (under /Music).

  What box are you using?

  I can open PST plug-in in the plug-ins pane in the Info of the smart control panel, for example to open a "Preset" Space Designer. And my plug-ins saved opens thus: for example:

  

  I saved my own preset as MyAmphitheaterExtrem.pst of ~/Music/Audio Music Apps/plug-in Settings/Space Designer / s 02.5 MyAmphitheaterExtrem.pst and copied pst two presets in Logic Pro X in the same folder.  Then I quit garageBAnd and recorded market and my saved preset appeared in Space Designer Panel, as well as logic copied presets.

• Should I update all the files from the Toshiba site after using the recovery CD

  I just used my recovery CD and update the Windows Update System.

  The question is: should I update all files in the files on this site download section as well?

  Usually after using the Toshiba Recovery CD everything should works and works correctly
  To my knowledge from time to time Toshiba has released new version of some tools or drivers. For example the BT stack will be developed all the time.
  But I think that if you have any problems with your system and peripherals, then you don't need t to update anything.
  Small is my opinion...

• Change in focus of the window with the mouse pointer

  On one of my computers when the mouse pointer moves to another window the focus switches to this window.  But this does not happen on my other machine.  Where can I find the setting for this?

  Start > Control Panel > easy access > easy access Center > make the mouse easier to use > check Activate a window by hovering over it with the mouse