Focus on MovieClip automatically?

Similar Questions

• Macro lens EOS T3i not turn or focus

  On my Canon EOS Rebel T3i, when I place the macro on the camera lens, it does not or focus (manually or automatically, if it is in auto or manual focus), almost like it is stuck. The zoom for the functions of this camera lens, normally when it is attached so I think it's a problem with the lens itself. Is there anything else I can try or is broken for good lens?

  Take a look at the solution in the following thread posted by Canon product Expert Julius.

  http://community.USA.Canon.com/T5/lenses/autofocus-not-working-18-55mm-lens/m-p/138114#U138114

  [EDIT]  This isn't a target macro, BTW.  The word 'macro' appears on the lens body to tell you what the MFD, minimum Distance of focus, or macro distance, is for this particular goal.

• [SOLVED] No DMF with SEL1018 on a6300?

  SOLUTION: I forgot you have to hold the focus button while turning the focus to DMF ring work.

  [Note: I'll keep the original post here even if it is fixed so that it helps someone in the future]

  Is the SEL1018 supposed to support DMF on the a6300? Mine will be manual focus not when I turn the focus ring when I have the a6300 set to the mode of update DMF.

  The AffichageRechercher / image LCD will not choose either mode DMF turning the focus ring, either.

  On the other hand, if I put the a6300 in MF mode, then Yes, by turning the focus ring WILL change the focus and it automatically ZOOMS in the image.

  The camera has firmware version 1.00 and the lens has firmware ver. 01

  I couldn't find an update of firmware for the lens.

  I understand there is a recently released for the a6300 firmware update, but it seems that this firmware would not address this point.

  Thanks in advance!

  Ooopppssss...

  I guess that I didn't know I will hold the AEL back buttonAF/MF button to activate DMF after that I moved the camera back focus button.

  It works as expected today. Thank you.

  Sorry for the false alarm. This completes the important news flash.

• You can have 2 sets of mirrored disks

  I have a Win7 x 64 box Pro that I use as a file server. Initially, I set up with 2 1 TB drives and their mirror. Now I have exceeded the and bought 2, 3 drives to mirror.

  I converted the disks in disk GPT to recognize over 2 TB, but when I try to create a Mirrored Volume, the option is grayed out. All other another RAID option is also grayed out.

  What Miss me?

  Thanks in advance - Smarter IT.

  I start by admitting that I him did not my self, but...

  Disk Manager can not create mirrors in part because it cannot convert the dynamic GPT disks. However, I remember the Diskpart command-line tool can do that. DiskPart has more features than Disk Manager, but he will do a few tasks 'potentially dangerous' Disk Manager protects you, it always protects the drive o/s of catastrophic change. If you have an internal card reader, that this would avoid confusion to unplug the unit to avoid that the disks contained in the lists. Also disconnect the existing mirror it would protect against any change.

  Open a command prompt window at the administrator level and run the diskpart command.

  In the new window command List Disk to identify the disks that you want to work with. You must be 100% sure which ones you want to change. The list will be numbers, but I'll use letters

  • DISKPART > select disk
  • DISKPART > convert dynamic
  • DISKPART > select disk B
  • DISKPART > convert dynamic
  • DISKPART > exit

  You will need to restart the PC (maybe twice) to recognize records 'nine '.

  Enter the Diskpart List Disk once again to make sure everything is as it should be.

  Then create mirrored disk = A, B Volume should create a mirror using all disks A and B. You can add the parameter Size = X(MB).  I have no idea how much time this task will take, but I think that timing is on the fly yet so should be pretty quick.

  The focus (Select) then automatically shifts to the new volume if the command Assign Letter = will give the new volume of his letter.

  If I can delete a second 3 TB drive I'll go there myself.

• Align the dynamic MC with the alignment of High Point

  Hello guys, I have a doubt, if a step having a height of 600px and I would like to focus a movieClip with dynamic size and the registration point is always at the top, to the this 600px 400px how it is possible, without having to create another movieClip.

  To Center vertically align the movieclip, first of all, you must wait for dynamic movieclip is complete, then you can place the movieclip based on...

  MovieClip._y = (600 - movieclip._height) / 2

• Autostart after some clips

  Hi, im doing something for a school project.

  What should I do now, made a movieclip automatically start and overlap the rest of executives, after 4 specific other clips are made with reading (any order).

  is it possible in AS2 and if so, how?

  thnx ahead

  You could have each of the 4 clips add 1 to a variable and testing the value of it every time that 1 is added.  When it is equal to 4, you can do what you will with the movieclip.  If there is a possibility that even of 4 could play more than once, you will need to have some sort of state variable for each that you define to indicate that she played, and then test all four status variables whenever one of them ends.

• focus - automatic merging in CR2 battery

  Hello everyone
  Anyone knows if its possible to melt the focus (focus stacking) directly from the images of CR2, or is it always necessary to save the images in jpg or tif and then make the "photomerge" and the "auto-merge layers'. .

  Photoshop CC / bridge / lightroom...

  Thank you

  Carlos

  No need to convert them. Select the files that you want to use in Bridge, then Tools > Photoshop > load files into Photoshop layers. One time charge, select all the layers (Ctrl + Alt + A) and go to Edition > automatic alignment of layers and then edit > auto-merge layers

• Panel files stealing focus check and download automatically after

  As I already mentioned in http://forums.Adobe.com/message/4917862 I am tired of the cart Dreamweaver. Also the many random crashes (that I've learned to live with) here is a bug that prevents me to 12.1 (and 12.1.1 still has not corrected this even if it is a confirmed bug!)

  When to change a site I have allways Setup 'automatically download files to the server when recording' since I access my test server with FTP or SSH (SFTP) too.

  But every time when I save a file of files steals focus Panel (probably because the download button is automatically released and is in the files Panel). So I press CMD - S, saves files fine, get is downloaded and I Alt - Tab to view the changes in the browser, Alt - Tab to Dreamweaver, start typing, for example I press BACKSPACE because I want to change a value and get a message if I really want to delete the file selected in the files Panel. Need to close, manual click the codeview Panel in exactly the place where I want my cursor before I can continue again. It of just ridiculous and makes 12.1 so boring, that I can't live with it. Now I am forced to use 12.0 which is slower and even more buggy, but at least I can type as expected because it doesn't have this bug. After the 12.1.1 release today that I was hoping that it was finally fixed just but he more tired... As I subscribe to creative cloud mainly to Dreamweaver I really think the cancellation and change to Coda 2 (which is not perfect either, but at least I will not pay $50 per month for bugs)

  Please Adobe, fix! Does not seem so difficult.

  Or at least tell me a workaround solution.

  Hello

  This problem has been fixed in the CCM update of 12.2. Please upgrade to this latest version. Some users have confirmed the fix as well.

  -Jones

• T3i only focuses automatic in "live-view".

  I bought a t3i two years ago and a half years. The last time I tried to use the camera, it wouldn't auto-focus. After reading online, I tried the following:

  -remove the battery for more than 10 minutes

  -check with another lens

  -swtich between AF & MF a few times

  The only thing that worked was switchign the camera for "live-view". When in "live-view" the camera is autofocus.

  Don't know what my next steps should be - have a great trip in three weeks and would like to have my camera working at this time.

  GRSuch

  The unit uses another system update in 'live view', and is used when you use the viewfinder.

  Your camera has 9 autofocus sensors on the floor of the camera.  You can put the camera in a mode where it uses all 9 areas of focus.  Be aware that if 9 points are on topics of different distances, the point that the camera will choose will be the one with the CLOSEST focusing distance.

  Alternatively, you can place the camera in a mode where YOU choose which of the 9 AF points will be used.

  Page 85 of your owner's manual you will show how to take a specific point AF or set mode where it uses all the.

  These areas of focus will ONLY work if the target has a report f / d of f/5.6 or less.   If you use a lens with a focal length multiplier, you have multiple focal report of the lens by the focal length multiplier factor.  For example a variable zoom f/3.5-5.6 who is zoomed in a little used f/5.6.  Put a teleconverter 1.4 x on this goal and it becomes a target of f/8 (autofocus will NOT work at f/8) or put a 2 x teleconverter on this lens and it becomes a f/11 (auofocus certainly will not work at f/11).  A teleconverter 1.4 x suitable only for f/4 or faster lenses.  A teleconverter 2 x, suitable only for f/2.8 or faster lenses.

  Maybe something is blocking certain AF points in your camera.  When is clean?  You can remove the lens, turn it on, use the menus to put in manual sensor cleaning mode.  This will cause the reflex mirror and lift to expose the sensor... but she exposes also the 9 AF sensors on the ground of the camera (you will not see the sensors... you will see only tiny holes/ports in the background and the sensors are hidden under these.)  If you see any dust or debris in there, then it would be a problem.  Just get a hand blower pressed (as a blower of Rocket Giotto... it's the bulb you squeeze with your hand to get the puffs of air) and serve.  Do not use compressed air cans.  They can leave a residue and if you get the residue on the sensors, you have a big problem because you can't them without disassembling the camera.  NO CANNED COMPRESSED AIR... NEVER!

  If you don't see anything visibly in the camera and you are not using a teleconverter that gets you over f/5.6 and you put the camera auto-choisir the Focus point and it cannot always focus... you should contact Canon service for help because you have exhausted well enough that you can do yourself.

• How together/moving Focus automatically to the next editfield?

  Hello

  I'm working on an application I need four editfield a key field, in these I put the setMaxSize 4, it works very well...

  Now, I want when user enter these editfield four letters the update automatically move to the next field.

  Please provide any reference code or logic.

  Thanks in advance.

  I would like to start by adding the editfields to their own data structure (a vector, for example), makes it easier to access.

  You can crush keyChar on the editfield and check the length of the text, if it is the maximum length call you setFocus on the next editfield (as appropriate).

• Best way to load but game not automatically an instance of movieclip?

  Hello

  I use CC lead to produce an HTML5 Canvas project that uses symbols with embedded animations. My main scenario one frame containing the animated symbols.

  I wish that the symbols load but NOT immediately start their timeline. Is there a way to put in place a symbol with animation, so that the animation starts immediately but waits for a command?

  
  

  Or, is it an event generated that I listen to, when a symbol is fully charged and ready to start?

  
  

  For example, I have an instance of a symbol named 'Planet10' and I would stop this movieclip play until it is said to do, rather than starting as soon as it is loaded.
  

  I've been hacking at it for a few hours now and my teacher of first year since some time there wouldn't be happy... his reign was that if you get stuck after 5 minutes, you waited too long to ask for help. :-)

  -Pete

  JavaScript variables are typed, but they are not statically typed. Declare a variable with no value initializes type not defined (non-null). Within a value Boolean comparison, undefined is converted to False. It's all documented behavior of the language, there is nothing to bet on. Advise beginners to the language to use ropes to semantically store Boolean data are simply false. It leads to the kind of code that can be found on thedailywtf.com.

  In addition, a quick overview of the scope of variables how works in canvas:

  • myVar = 1; variable is accessible everywhere in the current page (global scope)
  • this.myVar = 1; variable is accessible in all the images of the current clip
  • var myVar = 1; variable is accessible in the current context only

  So, this is what works:

  If (! this.didstop) {}

  This.didstop = true;

  This.Stop ();

  }

• Open new bookmark URL and FX scroll automatically for me, so focus is correct

  Hello:

  Y at - it a trick to get FX to open 1 URL and 2 rolls, the place I need on the web page is developed?
  If I minimize the, it is too small to read, so I need to scroll down.
  But I never get tired to do, whenever I open this Web page (which is a lot) for example about 15 times a day.

  I have the bookmark URL on my favorite bar.

  Thanks for your help.

  Well, that depends. Some pages contain a table of contents with links to the same page, followed by a "bookmark" or internal anchor. But if the page is that it is more difficult.

  I know an add-on with a feature like this, but I have not tried myself and judging by the number of facilities, it seems that almost nobody tried it: https://addons.mozilla.org/firefox/addon/finebook/

• Set the focus / keyboard listener to a movieclip

  Hello

  I have difficulties affecting a listener keyboard only when a specific clip is stationary:

  The control works very well with the line:stage.addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);

  But as soon as I change of scene for 'Tetrad ' which is the name of my clip to move nothing happens.

  I know it's something to do with accent assignment - can someone help me with my code?

  [AS]

  Cell control.

  import flash.ui.Keyboard;

  import flash.events.KeyboardEvent;

  tetrad.addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);

  function keyDownHandler(event:KeyboardEvent):void

  {

  If (event.keyCode is Keyboard.ENTER)

  {

  var movieClip1:MyCellClass = new MyCellClass();

  addChild (movieClip1);

  movieClip1.x = mouseX - 10;

  movieClip1.y = mouseY - 10;

  movieClip1.name = "cell1";

  var movieClip2:MyCellClass = new MyCellClass();

  addChild (movieClip2);

  movieClip2.x = mouseX + 10;

  movieClip2.y = mouseY + 5;

  movieClip2.name = "cell2".

  var movieClip3:MyCellClass = new MyCellClass();

  addChild (movieClip3);

  movieClip3.x = mouseX;

  movieClip3.y = mouseY;

  movieClip3.name = "cell3";

  var movieClip4:MyCellClass = new MyCellClass();

  addChild (movieClip4);

  movieClip4.x = mouseX + 8;

  movieClip4.y = mouseY - 5;

  movieClip4.name = "cell4;

  }

  }

  end of the control of the cell.

  [/ ACE]

  Simply move it.  You need not function within the service.  You just need the listener that calls the function in there...

  stage.addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);

  Leave this line in the function above but move the...

  function keyDownHandler(event: KeyboardEvent): void

  {

  ... / / all

  }

  outside of it

• Is it possible to not only open several tabs at startup, but also focus on the last?

  At the start, I want to focus on the tab on the very good. By default, firefox focuses on the left tab when opening multiple tabs at startup.
  Subject: solution of config?
  tab-mixplus does not help

  Not that I know of.
  Note that you can use Ctrl + 9 to go to the last tab.

  • https://support.Mozilla.org/KB/keyboard+shortcuts

  If you reopen the tabs of the previous session automatically then the focus is on the tab selected when you close Firefox.

• How can I open a new tab and enter automatically in the address bar and not in the Firefox search engine?

  When I open a new tab I see Google search smooth with large beautiful Firefox logo on the top center of research, and makes me automatically type in this research. Is there a way to automatically enter address bar when a new tab is opened? Just moved to Firefox and it's quite annoying.
  Thanks to all the advice.
  -Karl

  Looks like you have set browser.newtab.url to Subject: House which opens the default home page in each new tab. The simplest thing to do is to reset this preference so that instead of the new tab page:

  1. Type of topic: config in the address bar and press ENTER.
  2. To ignore the warning, press the big button "I'll be careful, I promise!
  3. In the search box, paste browser.newtab.url
  4. In the search results, click browser.newtab.url , and then choose reset.

  Otherwise,.

  1. Custom installation tab.
     • https://addons.Mozilla.org/firefox/addon/custom-new-tab/
  2. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  3. Next to the new custom label, click on the Options button.
  4. The value of any page you want to open in each new tab (topic: newtab is the value default; about: home is the default home page) and make sure that "Focus in the URL bar" is not checked.