Foglight | Configure the failover of database mirroring

Similar Questions

• How to remove the configuration of logical standby database cleanly

  Hello

  We are on the BSG with 11.2.0.3 version of DB. For unknown reasons, we would like to recreate the logic of the standby database and for this I want to cleanly remove/uninstall/remove LOGIC of DATABASE of the EVE of the DATA GUARD configuration that we have.

  Setup of the DG has already 1 PHYSICAL STANDBY DATABASE that works very well. PRIM, PHYSICAL and LOGIC are all on different HOSTS. Could you please guide or we suggest exact MOS Doc id in this regard? I found an MOS Doc id which is close enough, but its steps include dg configuration completely deleting what I don't want. Only the logical Standby database must be delete itself so that it can be installed again properly.

  We use the CONTROL GRID and DATA GUARD BROKER.

  Bundle of thanks in advance.

  Best regards

  Hello

  Thank you very much.

  What I have is:

  -DROP DATABASE (from logical database in standby)

  -asmcmd > and removed the rest of the orphaned files related to the logical database.

  -DGMGRL > remove the database logicladb; one

  -Grid control > removed from here

  -deleted the database logical PRIMARY related to logic, for example, log_archive_config.

  Other steps > ID note (Doc ID 733794.1) about the LOGIC of STANDBY DATABASE (I think that MINING regarding)

  She's.

  Best regards

• Configure the new Oracle with HFM SSP database

  Hello
  
  We have upgraded the oracle database to new version 11g. We use HFM 11.1.1.3 version. When I tried to configure the new database oracle with existing shared Services HFM, the EPM Configurator is suspended. Please could you clarify the below a few questions before starting the configuration of the database.
  
  1. don't we want to modify properties or configuration files before starting the EMP Configurator?
  
  2. If we want to edit the file reg.properties, which is the password shows in the file reg.properties (here is the structure of the reg.properties file)? If I have to give password of Oracle database schema?
  
  JDBC. URL = jdbc\:hyperion\:oracle\: / / xxxxx;
  password =?
  JDBC. Driver = Hyperion.JDBC.Oracle.OracleDriver
  local. Value = #.
  username = schemaname
  
  Thank you
  Michel K

  Is it a new database server that you want to configure? As if he was just updated, you should not need to do anything.
  If this is a new database server, then have a read of the doc within Oracle Support - "How To Change Shared Services repository database in EMP 11 [ID 976279.1]".

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• para procedure configures the antes of comenzar con instalacion del servidor vCenter Server database

  Hola y buenos dias, mi esta pregunta diriguida a como is has crear para vcenter en UN server remote sql database.

  Read el documento.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1029061

  Pone in el apartado 8:

  Configure base datos antes comenzar con instalacion del servidor vCenter Server, a less than that to use the version of Microsoft SQL Server 2005 Express that viene con el instalador.
  
  Note: Los scripts for creating schema steps in the Microsoft SQL Server documentation y Oracle son opcionales y estan conducted a administradores experimentados of data bases. El instalador vCenter Server crea el scheme automatically if no anteriormente exists.
  
  

  • Microsoft SQL database
    
    • Use a script para crear UN database o local remota con una administrator cuenta Escalin base data. Optionally, the database can be created using SQL Server Management Studio from the same el formed as en version of vCenter Server 2.5
      
    • Configure una conexion ODBC type SQL Server. Cuando is instala el sistema vCenter Server, will you can set una conexion con una database SQL Server
      
    • Configure the Microsoft SQL Server JDBC para TCP/IP protocol. If el servidor SQL Server TCP/IP has not disabled y los puertos dinamicos no estan configurados, the JDBC connection permanent cerrada. Esto causa las and statistics of vCenter Server dejen funcionar.
      

  Como no voy a usar the espress, tengo that create db manualmente, habla los scripts? not los encuentro in el DMC, por lo tanto donde puedo encontrarlos having into account that voy a instalar Vcenter 4.1U1 en UN 2008 R2 y el otro 2008R2 is sql y su version are sql2008R2

  a greeting

  Hola irasines:

  Como ha well said piaroa, el usuario crea y el of database in SQL e instala client el nativo donde vayas a instalar para vCenter connected contra base data. Run las credenciales y seleccionas the database there are el is encarga crear el completo scheme.

  Todos moderators puedes seguir el documento ESXi Installable and vCenter Server Setup Guide from page 51.

  A greeting.

  --------

  José Luis Gómez Ferrer de founder Couto of PiPo e2H Blog: http://blog.e2h.net

  If upon that esta otra respuesta utility fue, por favor any o da el voto. Gracias.

  If you find this or any other useful answer, please consider awarding points. Thank you.

  

• What are the basic element of basic configuration of an oracle database?

  What are the basic element of basic configuration of an oracle database?

  It consists of
  one or more data files.
  one or more files of control.
  two or more redo log files.
  The database contains
  multiple users/schemas
  one or more rollback segments
  one or more storage space
  Data dictionary tables
  User objects (table, index, views etc.,)
  The server who access the database consists of
  SGA (dictionary database Cache buffers, a Redo buffers of the newspaper, shared pool SQL buffer)
  SMON (System MONito)
  PMON (Process MONitor)
  LGWR (LoG Write)
  DBWR (data writing)
  ARCH (archive)
  CKPT (Check Point)
  RECO
  Dispatcher
  Associate the user with PGS process

• Should what character I configure the target database?

  Should what character I configure the target database?
  should how NLS I set for the target database?
  I have imp data from .dmp file and get the following error message:
  

  Export file created by EXPORT:V10.02.01 via conventional path
  import done in WE8MSWIN1252 character set and AL16UTF16
     NCHAR character set
  export client uses US7ASCII character set (possible charset conversion)
  export server uses UTF8 NCHAR character set (possible 
     ncharset conversion)
  ...
  IMP-00003: ORACLE error 1861 encountered
  ORA-01861: literal does not match format string

  Now, I think you're right.

  Since you do not trust the accuracy of my posts I will not waste my time trying to answer your questions

• Bug in "DBSS" - not available on a database mirror? Or a real failure?

  Does anyone else make false positives on 'DBSS' rule - not available for mirrored databases?

  Once every week or two I get a fatal alert "Not available" for the 'DBSS' rule - not available on all databases mirrored to my server.  It takes only a few minutes in Foglight, then goes back to a normal state.

  I looked at the newspaper database monitoring for the mirror and the principle, all SQL server and Agent logs, all the server event logs... nothing.  The history of all mirrored databases have no signs of availability according to the real itself SQL Server issues.

  The only reference to this rule Foglight is:

  https://support.quest.com/search/SolutionDetail.aspx?ID=SOL76183

  Go through the article, I looked at the data stored in the "DB" State for the affected databases, it says "Not available" for the times, that the alert has developed.  However, I can't find anywhere on the current SQL Server where this error can come.

  I have not particualrly want to go rushing to false positives fatal alert indicating that my mirror is not available

  Any thoughts on what I might try?  Everyone knows about this problem?

  Or is this just a blip?

  See you soon,.

  Paul

  Thank you, Paul.

  We opened a proof of support as well.  It turns out that we have the updated version of the cartridge, is currently under investigation.

  Brian

• The Citadel 5 database engine installation

  Hello

  I just bought DIAdem Advanced and want to connect to a database the Citadel (developed by a 3rd party) 5 on our local network to view and analyze the data. When I tried to configure a new data store in the DIAdem browser section, I got an error message saying:

  "You cannot configure the selected data source:

  The National Instruments Citadel 5 database engine has not been installed on this computer. »

  I can't determine how to install this engine. Some research, I think he can come in the context of the LabVIEW Datalogging & supervisory control Module (that I did not and seems to cost extra money). Can someone advise how best to get it?

  Thank you very much

  PorridgeMan.

  Hi PorridgeMan,

  As a user of tiara, all you need is to download and install the following driver:

  "Systems development/Run-Time of lookout 6.2 - x 86 Windows 2000/Vista/XP - Web Client"

  ... that you will find at the following ADDRESS:

  http://Joule.NI.com/nidu/CDs/view/p/ID/1142/lang/en

  Note that you will also need to go to your universe of Citadel in MAX and create a profile for the external db Citadel that you want to connect before it appears as a selectable item in the DIAdem data store dialog box.

  Let us know if you still have problems connecting,

  Brad

• Configuration of a historical database of separate management

  I am deploying new infrastructure Active 7 roles alongside my ARS 6.9 production. Of all the ARS earlier versions, I kept the Configuration and the history of management within the same database, for example ActiveRoles69.

  I want to sever the two databases above.

  Can someone enlighten as on all the advantages and disadvantages of the separate databases?

  Someone has set up separate databases in production, and if so, can you provide a positive feedback or negative of this decision?

  Thanks for any comments.
  -Steve

  I always recommend to have separate databases, for several reasons.

  With an active role, the management history database is not just a static database. It's actually the product performance data. Write to the database as we of the tasks, and then run reports by querying the actual work that has been done. In busy environments, or environments have been the history of change in retention period has been increased beyond the default of 30 days, this can mean that the execution of the SQL instance hosting the database of management history can actually be a bottleneck for performance of the product. Separate databases makes it easy to migrate the database of management resources for new equipment or a cluster if necessary more gourmet story.

  In addition, since the history of database management is read from and written to many more often, it is more likely to suffer from malformation, since the software is a public medium. This can sometimes mean that the history of management database must be archived, a new database created and the data recovered using the wizard to transfer in the history of management or the control center roles Active. It is a resource that I created to help with the rare cases:

  

  This process is much easier if the databases are separated.

• How to plan the failover for the following scenarios in Flex-connect mode.

  The following queries are against the AP high availability (no SSO failover or controller HA), which means that if a controller fails, the AP will be failover to the secondary controller that is in a different location than Geo. the AP will be to connect Flex with local switching and local authorization mode: in this scenario, here are my questions

  1: if I have a SSID that has a set of interfaces that are connected to him, can I switch it on the other controller where there may be a single WLAN connected. ?

  2:do, we need to subnet masks to match both ends?

  3: if I have a SSID with open authentication, can I configure the SSID of the remote network without authentication?

  4: can someone link me to the top with a document that explains the configuration of the case study of the flex-connect mode fail on scenarios.

  Any help given would be really appreciated.

  Thank you.

  1: if I have a SSID that has a set of interfaces that are connected to him, can I switch it on the other controller where there may be a single WLAN connected. ?

  The groups interface works only for centrally switch not locally

  2:do, we need to subnet masks to match both ends?

  See #1

  3: if I have a SSID with open authentication, can I configure the SSID of the remote network without authentication?

  If you configure an SSID with open authentication, then the all having APs SSID assigned to it will use.  Open authentication is identical to no authentication.

  4: can someone link me to the top with a document that explains the configuration of the case study of the flex-connect mode fail on scenarios.

  Do a search on Google for 'FlexConnect deployment guide It will have links to failover.

  -Scott

• Remove the failover unit

  I have a client who wants to remove their unity failover server. The unit is 4.0 (3) SR1. I removed all the stuff of CallManager thus failover is turned off but I was wondering what I would do on the server of the unit remaining. Is there way or reason to remove failover connections/services?

  Thank you

  Mike

  It really depends what you want to do with the secondary server. At the very least, you should remove the configuration of failover from the primary server. See this link for more details.

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a85.html#wp1038631

• How to integrate the CCM user database unit

  Is CCM and the unit with a ldap user database, possible to integrate? and how

  BTW, if you add a Subscriber in the unit, is to add a user to windows Active Directory.What is the password for this user AD?

  HI -.

  The permissions to allow the unit to create objects user AD, groups and distribution lists are made by running the wizard of permissions of the unit as well as configured when you install the unit (for example, you specify if you want to create user objects, or simply import subscribers, which is how we do it). The default password for the Windows account of the user of the AD is listed in the template of the default subscriber passwords, domain Windows Password Settings section. For security reasons, it must be changed to follow the policies of your organization password. You can change this by creating a new model, based on the default subscriber, with a new Windows Password Settings that gets applied to new subscribers as they are created or imported. The unit is not a LDAP database, it uses the Active Directory database. Database SQL of the unit is synchronized with the information in the AD. CallManager uses its own telephone directory and user information or can use AD. We chose NOT to incorporate the MAC with AD. It is a personal choice for us - we didn't want to CCM or unity, creation of user objects. Maybe it's a different look for a Messaging voice only implementation rather than Unified Messaging. I can't deal with your issue on the integration of Cisco databases and unity.

  Best wishes

  Ginger

• vNIC: activate the failover or group?

  Hello

  I have a UCS 6248 FI + IOM 2204 + Server B200M3 with:

  -Mezz Slot: empty

  -slot mLOM: VIC 1280

  So I, for the B200M3, 2 x path of 10Gbps of VIC at FI6248:

  -port0, 2204-A, FI - has

  -port1, 2204-B, FI - B

  What is the best practice to configure the veth under UCSManager:

  -use the vNIC 0 (fabric) + activate failover: with this choice, I use only 1 x 10 gb/s (for ethernet) path; the path through fabric B would be used, if any device failed on A fabric. In my mind, it is not the best way to use the architecture of the UCS.

  -use 2 vNIC: vNIC vNIC 1 (plate B) and 0 (fabric): with this choice, the operating system will see the 2 NIC in my case, the OS is W2K8R2: how to set up the consolidation of NETWORK cards?

  -Another idea?

  Many thanks for your advice.

  Best regards.

  Nicolas

  For the Cisco VIC, we have windows 2008 nic teaming drivers.

  Download and install the drivers for Cisco UCS VIC

  Install the NIC Teaming driver

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/vic_drivers/install/Windows/2.0/b_Cisco_VIC_Drivers_for_Windows_Installation_Guide_chapter_010.html#d107e478a1635

  Here's another thread on the subject.

  Windows team driver available for M81KR / P81E VIC

  https://supportforums.Cisco.com/message/3592963#3592963

• DIRT and what his role with the MS - SQL database

  I am setting up the procedure for the Bare Metal Restore for our Telco servers. And I wonder if the DIRT back up the MS - SQL databases.

  We have 4.0 (4) SR1 and use DIRT 1.0 Build 122

  Thank you

  Debbie

  Restoration of dirt requires that the unit (same saved version) is running before, it'll do a restore - as these UnityDB and ReportDb databases must be present - restoring pulling data out of the local DBs first before their replacement by the saved tables (without things like the name of the local server, which GC/DCs we are connected) configuration etc...). So no, it won't it create on the fly because the restore cannot function without a server in operation of the first unit. This isn't just a backup and restore, but also a type migration tool.

• Replication of ACS and integration with the Active directory database

  Hi all

  I have to configure two ACS SE with the internal database replication. I have also a server active directory that must integrate with ACS. My doubt is that I need to configure the IP address of the ACS during installation of the remote agent on active directory or only the primary ACS

  No need to give the IP of two ACS. Give the primary IP of ACS.

  Kind regards

  ~ JG

  Note the useful messages