Configuration of a historical database of separate management

I am deploying new infrastructure Active 7 roles alongside my ARS 6.9 production. Of all the ARS earlier versions, I kept the Configuration and the history of management within the same database, for example ActiveRoles69.

I want to sever the two databases above.

Can someone enlighten as on all the advantages and disadvantages of the separate databases?

Someone has set up separate databases in production, and if so, can you provide a positive feedback or negative of this decision?

Thanks for any comments.
-Steve

I always recommend to have separate databases, for several reasons.

With an active role, the management history database is not just a static database. It's actually the product performance data. Write to the database as we of the tasks, and then run reports by querying the actual work that has been done. In busy environments, or environments have been the history of change in retention period has been increased beyond the default of 30 days, this can mean that the execution of the SQL instance hosting the database of management history can actually be a bottleneck for performance of the product. Separate databases makes it easy to migrate the database of management resources for new equipment or a cluster if necessary more gourmet story.

In addition, since the history of database management is read from and written to many more often, it is more likely to suffer from malformation, since the software is a public medium. This can sometimes mean that the history of management database must be archived, a new database created and the data recovered using the wizard to transfer in the history of management or the control center roles Active. It is a resource that I created to help with the rare cases:

This process is much easier if the databases are separated.

Tags: Dell Tech

Similar Questions

  • Separate management / VMotion Best Practice?

    We're heading to 4.0 ESX ESXi 4.1.  Our servers have 4 physical Gigabit NIC.

    On ESX 4.0, we lack 2 vSwitches:

    vSwitch0

    Service Console - Active vmnic0 - vmnic3 watch

    VMkernel - Active vmnic3 - vmnic0 eve

    (Unique network interface cards / IPs by function)

    vSwitch1

    Port VM - vmnic1 and vmnic2 active groups

    (Several VLANS to resources shared)

    With the changes in ESXi, is recommended to separate the management of VMotion as we did with ESX?  Notice that we use the same subnet for these two functions.

    Personally, I would prefer combining Management and VMotion.  VMotion will not only benefit an additional NIC usage, especially with the multiple simultaneous VMotions?  At the same time, it seems not that management traffic would be impeded to the point of needing to separation, as we use the same subnet.  In addition, security should not be a problem, since the new, we use the same subnet for management and VMotion.

    Your configuration is consistent with "best practices". I prefer separate management taffic VMkernel myself, even if it will cost me some performances of vMotion.

    ---

    MCITP: SA + WILL, VMware vExpert, VCP 3/4

    http://blog.vadmin.ru

  • What are the basic element of basic configuration of an oracle database?

    What are the basic element of basic configuration of an oracle database?

    It consists of
    one or more data files.
    one or more files of control.
    two or more redo log files.
    The database contains
    multiple users/schemas
    one or more rollback segments
    one or more storage space
    Data dictionary tables
    User objects (table, index, views etc.,)
    The server who access the database consists of
    SGA (dictionary database Cache buffers, a Redo buffers of the newspaper, shared pool SQL buffer)
    SMON (System MONito)
    PMON (Process MONitor)
    LGWR (LoG Write)
    DBWR (data writing)
    ARCH (archive)
    CKPT (Check Point)
    RECO
    Dispatcher
    Associate the user with PGS process

  • Question on the definition of the identification information of database in Enterprise Manager

    Good evening

    I tried to set the credentials of database in Enterprise Manager (Preferences-> preferred References) and ran into a case that I don't understand. Please see the "diagram" (which attempt to mimic screen EM--very roughly). I show the name and host fields separately because those who are constant.
    Name             Host       

orcl.john.local  Oracle2Day1.john.local
    the above fields are followed (including my original contribution):
       UserName  UserName   SYSDBA     SYSDBA    Host      Host
             Password   userName   Password  UserName  Password

   scott     abc123     sys        abc123
    When I enter in the above and press the button "Test", everything works well. I thought that if I could connect as SCOTT, I would be also able to connect as SYS (not a good idea, but, it's an exercise), so I tried this:
       UserName  UserName   SYSDBA     SYSDBA    Host      Host
             Password   userName   Password  UserName  Password

   sys       abc123     sys        abc123
    The above gives the following:

    >
    Error
    Failed to connect to orcl.john.local as the user sys.
    >

    The question is: SYS can connect as SYSDBA, how is it possible that he wouldn't be able to connect as a user 'normal '?. I do not understand why this scenario fails.

    Thank you for your help,

    John.

    http://download.Oracle.com/docs/CD/E11882_01/server.112/e10897/users_secure.htm#ADMQS12004

    "
    When you connect as user SYS, you must connect to the database as SYSDBA or SYSOPER
    "

  • Update Manager and the configuration of Virtual Center database = 1 database or the database even?

    We have a small environment VMware - 2-3 hosts, only 5-6 virtual machines for now, perhaps upward at 10-12 during the 2009 year.

    I looked at VUM and VC sizing spreadsheets and it seems I can do VC and Crossover work of SQL Express 2005 for 1-3 years, I need patch storage etc. and know that I may need to upgrade.

    VC and VUM facilities create their own separate databases or they are combined to form 1 data base?

    Or I would be better to buy 1 license Standard SQL with the 10 Cal instead? (I know that this would put the scale easily.)

    Thank you, Tom

    If you let the VC and VUM installers create the databases on the instance of SQL SERVER 2005 Express (named SQLEXP_VIM), it will create separate databases for each (VIM_VCDB for vCenter) and VIM_UMDB for the Update Manager. It is possible to have both of them use the same database, if you need to specify the database and ODBC settings in the installer.

    Hope that helps! Please, help me by marking my response as "useful" or "correct", if you feel it is useful!

    -Amit

  • How to activate the database from Enterprise Manager Grid 12 c EBS 12.2.5

    Hello

    I have a question how do I activate the enterprise Grid Control on the 12 c database manager.

    Now, I was demanding to activate the database of EM 12 c on EBS 12.2.5 grid control. Already tried to emca, but showed nothing to configure?

    Please help me how to activate this feature?

    Thank you

    Andreas Kuncoro

    Hi Christophe,

    Thanks for your info. I already activate.

    Thank you.

    for retail, the step:

    Enable Enterprise Manager on Oracle E-Business Suite with database 12.1.0.2

    Concern about the listener and the database only.

    1. check the listener

    $ cd $ORACLE_HOME/network/admin/VIS2_miiexa01 /.

    $ more tnsnames.ora

    ###############################################################

    #

    # Do not change the settings in this file manually. They are managed

    # automatically and will be overwritten when executing automatic configuration.

    # For more information about automatic configuration, see the Oracle

    # E Business Suite Installation Guide.

    #

    $Header #: NetServiceHandler.java 120.28.12020000.6 2014-05-14 07:55:23 mmanku ship $

    #

    ###############################################################

    VIS2 =

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

    (CONNECT_DATA =

    (SERVICE_NAME = VIS2)

    (INSTANCE_NAME = VIS2)

    )

    )

    VIS2_FO =

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

    (CONNECT_DATA =

    (SERVICE_NAME = VIS2)

    (INSTANCE_NAME = VIS2)

    )

    )

    VIS2_LOCAL =

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

    )

    VIS2_BALANCE =

    (DESCRIPTION =

    (ADDRESS_LIST =

    (LOAD_BALANCE = YES)

    (FAILOVER = YES)

    (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

    )

    (CONNECT_DATA =

    (SERVICE_NAME = VIS2)

    )

    )

    VIS2_REMOTE =

    (DESCRIPTION =

    (ADDRESS_LIST =

    (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

    )

    )

    VIS2XDB =

    (DESCRIPTION =

    (ADDRESS =

    (PROTOCOL = tcp)

    (HOST = miiexa01.vision.co.id)

    (PORT = 1529)

    )

    (CONNECT_DATA =

    (SERVICE_NAME = orcl12XDB)

    )

    )

    extproc_connection_data =

    (DESCRIPTION =

    (ADDRESS_LIST =

    (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROCVIS2))

    )

    (CONNECT_DATA =

    (SID = PLSExtProc)

    (PRESENTATION = RO)

    ) )

    IFile=/Home/VIS2/12.1.0/Network/admin/VIS2_miiexa01/VIS2_miiexa01_ifile.ora

    2. check the database

    $ sqlplus / as sysdba

    check port https already set to EM

    SQL > SELECT 'https://'|| SYS_CONTEXT ('USERENV', 'SERVER_HOST') |'. ' || SYS_CONTEXT ('USERENV', 'DB_DOMAIN') |': ' | dbms_xdb_config.gethttpsport () | "/em/' double.

    SQL > SELECT 'https://'|| SYS_CONTEXT ('USERENV', 'SERVER_HOST') |': ' | dbms_xdb_config.gethttpsport () | "/em/' double.

    using the https protocol to open a session on EM

    SQL > exec dbms_xdb_config.sethttpsport (5500);

    Changeinit .ora

    $ viinit .ora

    Add the new line oninit .ora

    Dispatchers = "(Protocol=TCP) (SERVICE =XDB)" "

    Restart the database for changes in the init.ora file take effect.

    SQL > show the extreme setting

    VALUE OF TYPE NAME

    ------------------------------------ ----------- ------------------------------

    chain of dispatchers (PROTOCOL = TCP)(SERVICE=VIS2XDB)

    whole MAX_DISPATCHERS

    SQL > exit

    Thank you

    Andreas Kuncoro

  • Unable to connect to the database console Enterprise manager

    Hi all

    I've updated 10.2.0.1 10.2.0.4 on sun sparc 5.10 using the patch 6810189 Set

    when im start dbconsole agent is disconnected
    and when im start dbconsole agent does not start with it

    Check the steps

    emctl start agent $
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Starting Agent... started.
    $
    agent of $ emctl status
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Agent version: 10.1.0.6.0
    Version of the WHO: 10.1.0.6.0
    Protocol version: 10.1.0.2.0
    Agent home: /u01/app/oracle/product/10.2.0/production_sid
    File binary agent: /u01/app/oracle/product/10.2.0
    Agent process ID: 5462
    Parent process ID: 5457
    Agent URL: https://production:3938/emd/main
    Starts at: 2009-06-15 08:42:29
    Started by user: oracle10g
    Last reload: 2009-06-15 08:42:29
    Last download successful: (none)
    Last attempt to download: (none)
    Total megabytes of XML files uploaded so far: 0.00
    Number of XML, files awaiting download: 60
    Size of the XML files in the upload wait (MB): 24.56
    Available disk space on the file upload system: 42.75%
    Agent is running and ready
    $
    $ emctl status dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    https://production:1158 / console/em/aboutApplication
    Oracle Enterprise Manager 10 g is not running.
    Logs are generated in the /u01/app/oracle/product/10.2.0/production_sid/sys directory
    man/Journal
    $ emctl start dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    https://production:1158 / console/em/aboutApplication
    -An instance of Oracle Enterprise Manager 10 g Database Control is already runn
    ING.
    agent of $ emctl status
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Agent, it is not running
    $


    And I found Agent/WHO versions are different from the version of database.

    After hunting forums/google

    I tried to download agent (OMS VERSION NOT VERIFIED)

    Download emctl agent $
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    EMD upload error: popped uploadXMLFiles: SGD version not yet checked...

    And safe agent (SGD failed to START)

    emctl security officer $
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Enter the password of the Agent:
    Officer is arrested... Fact.
    Fixing agent... Has begun.
    Requesting a download WHO HTTPS URL... Failed.
    WHO is not configured for Enterprise Manager security.
    emctl start agent $
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Starting Agent... started.

    Please help me to solve this

    Hi Tunder Angel,

    This is the problem

    Please see this

    +| ORA-20603: time zone update schedule re +.
    region of a target is not supported. Use the mgmt_target.set_agent_tzrgn () to change API
    exercise of the zone area. (name of the target = hostname:3938) (target type = oracle_emd) (
    new = tzrgn - 04:00) (old tzrgn = UTC)

    There is a difference of time zones

    Now you need to check Oracle Metalink Document: impossible to start agent fails with the error "ORA-20603": Doc ID: 788944.1

    Just follow the Dbconsole of the document part.

  • Cannot open the database: TrueSuite Access Manager

    Whenever I try to record fingerprints in TrueSuite Access Manager, I get an error indicating that it was unable to open the database.

    Hello

    Have you tried to reinstall the TrueSuite software?
    I think that the registry is confused upwards or a part of the software is damaged. Who knows.
    But I think that a new installation of software could help to make it work again...

  • Configure button disabled on the playback device, manage audio devices. How can I reactivate the button Configure?

    Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that.   I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k.  I've changed this before clicking on the button configure on the playback device, manage audio devices.  But now, this button is disabled and I can't check the set up or make changes.  I am logged in as an administrator user, how to re - activate the button set up?

    Thank you

    Darren

    Hello, I have stopped the Windows Audio Service and rebooted a couple of times.  Now I have his back.

    Thank you

  • Foglight | Configure the failover of database mirroring

    Hello

    How to set up failover for mirring database.

    I tried this configuration:

    My FMS application a database is xxx.xxx.xx.14 and mirring server is located in xxx.xx.xxx.16, and the witness server is xx.xxx.xxx.26

    and finally I changed the server configuration file in FMS (server.database.host = "xxx.xx.xxx.16" ;)

    After I tried to restart, but it didn't... Please help me solve this problem.

    What type of DB are you using?

    I suggest you to consult the guide to high availability

    It's the 5.6.10 version http://edocs.quest.com/foglight/5610/files/FoglightHighAvailability_Field.pdf

    Specifically to work with Oracle RAC, you have this info

    http://eDOCS.quest.com/Foglight/5610/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?context=field&file=HA-field/CommonConfigs.2.php&single=true

    Golan

  • difference between the configuration of System center 2012 & central Office Manager

    Can someone give me the difference between the configuration of System center 2012 & version 8 Central Office Manager please.

    Hello

    I suggest you complete differences of the research for yourself. You can ask your question on the System Center forum and contact support central Office for more information.

    http://social.technet.Microsoft.com/forums/en-us/configmanagergeneral/threads

    I hope this helps.

  • historical database of patch

    Hello

    I like to read

    Maintenance utilities

    Version 11i (11.5.9)

    Reference No.. B10640-01

    Page 6-1

    and I want to know database of historical patch, how is it active?

    Is there a special action or only depends on mode adpatch?

    Thank you.

    Hello

    Nothing special to do.

    adpatch records all actions of correction in the database and it can be displayed in OAM or questioning the relevant tables.

    Kind regards

    Bashar

  • Impossible to add the database in enterprise manager 12.1.3

    Hi all


    I recently installed 12 c (12.1.3) on rhel 6.2 oem 64 bit.

    DB version is 11.2.0.3.0

    I've added a target.

    I went to (top - right)

    Configuration-> add target-> manually add target.

    And the agent has been installed successfully.

    However after that once I come to

    (Left side)

    Target-> data-> add-> Oracle database

    I'm not able to see the host name that was added.

    Help, please.

    Thank you.

    If the agent has installed successfully, to connect on the Server DB and goto AGENT_HOME/bin and see the output of the emctl status agent and see if the agent is able to connect to the OEM and also able to download data to the SGD server. Try to stop and start the agent and see if there are errors seen on DB host.

    To add a database to the OEM make you also entered it in the file/etc/oratab on the DB server.

    Thank you

    Amar

  • Standby Database - No. Enterprise Manager - 11g so what jobs?

    Hello

    So I implemented data guard for our production of 11g database.  I used the SQL method.   No control of the broker, no cloud or the grid.

    The data is synchronized with our production database.   But - if I have to failover to the standby database, there is no enterprise manager to manage it.  I have several scheduled tasks in our production database. (These jobs involve the execution of stored procedures, SQL, etc.).  Of course these jobs wouldn't if we were using the database pending because there is no EM for it.

    Add to this the fact that the company where we license Oracle since (we're a college) does not yet support 12 c.  If I ran 12 c, we are on our own until they do, if there are problems.

    So, if I ever use our database of Eve, what jobs that are not running? I know that I could perform them manually, or I might get them to run with SQL Scripts using Windows batch files, etc..  Essentially reproducing jobs EM with Windows bat files.  (I'm already back up the database ensures that).

    What is the right way to go about this? Install control cloud 12 c on a server and then to administer my database sleep with her? I guess the 12 c cloud control can administer an 11g database?   For those who have done this, have you installed the control server to cloud 12 c on its own server?

    We manage our server under Windows 2008 R2.

    Any contribution is appreciated.

    Thank you

    Fix. They will work in Main Mode. Manages the "SET_ATTRIBUTE" 'DBMS_SCHEDULER' if value "PRIMARY".

    So if you make a hole or failover mode of the database changes and your work are managed.

    EM jobs are not the same thing as that.  DBMS_SCHEDULER is stored in each database.

    There is a forum here also DBMS_SCHEDULER with tons of information.

    Best regards

    mseberg

  • OEDQ - configuration of Siebel Staging Database

    I'll put up 11g with stand alone 8.1.1.11 version OEDQ. I'm in the section configuration of the database staging in the below URL

    http://docs.Oracle.com/CD/E48549_01/doc.11117/e40741/TOC.htm

    Document said to run scripts to create different tables for the batch.

    What is the best place to create this tables? These tables should be with SIEBEL schema or can they be created in the schema EDQCONFIG or EDQRESULTS?

    Thank you


    Hello

    As the staging tables are used only for temporary data for running batch DQ of Siebel, they agree quite like the extension of the pattern of results of the Disqualification or (better) an additional scheme in the same database. That's what we normally recommend.

    Note that if you extend the schema of results you may need to re-run the scripts after the Disqualification upgrade to a new version.

    Kind regards

    Mike

Maybe you are looking for