Foires buttons graphics.

Similar Questions

• can I access button graphic Accelerator cursor in safe mode? Changed it & display lost, gone!

  XPSp3, card ATI 200 Series
  I was wondering what graphics accelerator made, moved cursor left and immediately lost the display. Computer still works, but I don't see anything to put back in place. It will damage the all files to turn it off with all these menus open? Restart in safe mode you'll see the screen and can recover in device mgr, if I can put the cursor back where he was?
  Or any other suggestions?

  Turn off the computer by pressing the power button for 10 seconds. It's better than just pulling the plug.

  Safe mode should start with basic video settings, so you should be able to undo what you did.
  HTH,
  JW

• Add the button graphic paint

  Hello

  Is it possible to add a button next to an object painted. example is it possible to have a square drawn next to a button.
  Thanks in advance

  http://supportforums.BlackBerry.com/T5/Java-development/create-custom-fields/Ta-p/444962

• Does anyone know how to link a video full screen (No button graphics) as a button to play another video program in yet?

  Please see my post from 7/27 copied then:

  CS6 still...

  I need video loop as the first Full-frame play to act as a button (if activated) to read the main program.

  Since a file .psd is necessary to create a button, I created a file .psd with syntax layer as follows: SEE. SCREENSHOT OF PSD LAYER BELOW

  Layer group: (+) Motion Menu group < I have added a space on each side more sign for this forum only note, if I leave the spaces, it transforms into a chart >

  Under layer within the MM group: (%) Video

  NOTE 1: Under inner layer MM group has a mask layer specifications manual Adobe <see screenshot below >

  NOTE 2: Since there is no visible button, < any Full-frame video must act as a button > I don't understand a (= 1) to highlight the layer

  I imported the .psd two layers in still in the first Menu to play. SEE MENU AGAIN: MOTION TAB SCREENSHOT BELOW

  Then, in the properties of the Menu tab, I clicked on the motion tab and drag the video pick whip in the video asset file < menu.mov > in the project Panel to assign the 33:06 .mov video looping as the first play in the main Menu. (See Menu file name: Midnight swim main movement Menu_5 in the screenshot below)

  I do the same with the Audio selection on the same video resource icon .mov to play the audio track with the first play Main Menu.

  Once I have 'add the video background' and 'add audio' to the menu first Play through the selection icon. Rather than place the video in the .psd correct Sub-Layer box to the left of the necessary, creates a new locked layer "background" in the main Menu of Photoshop, but with the always correct to the menu.mov...

  See screenshot below where I had first to unlock the new layer, then I changed the name of the new layer (%) Video and finally he nested within the Group of layers as an Undercoat. So as the new layer does not have the compulsory mask, I add a layer with layer mask: Add a layer mask: reveal all. Finally, I save the .psd file to allow again to pick up the first listen change / hand menu .psd.

  But when I saw the project, the first video game playing on the preview. Which is OK because it is not rendered. Then, I made the Menu driven via the icon in the preview screen. But curiously, he restores the audio but NOTE the video as menu.mov assigned (preview is empty when finished rendering) and double strangely, it makes the appropriate length of the video from the video file program! < do not forget, the assets of video and audio right is assigned correctly in the main Menu: button tab properties MOTION - see screenshot below >

  Perhaps. because the button link play first is the video chapter program main named Midnight swim. (The button link IS correct because if the viewer active / click full screen on the first video game anywhere on the screen as a button, it is supposed to start the main program)

  Bottom line - the rendering should allow preview to play as the correct play first video resource (the 33:06 menu.mov) attributed the tab not query the link main program Midnight swim. I've never met this dysfunction.

  I have the manual .pdf CS6 online and a paper copy of the CS3 manual where I took care to implement the .psd file and the recall of programming so that everything works correctly. In ADDITION, I've done this before with success, but the only difference was that my previous effort was not full-screen video. It was actually more complicated with many buttons and a sector specifically where hidden video read. My point is that it worked perfectly using the syntax above, but for reasons I can't understand, don't worry this time. It must be my syntax layer .psd or something I'm missing or wrong in yet. Please see screenshot below also diagram again.

  Any experience with the help of video Full Frame as the first play, Please HELP! I'm on a deadline, as usual. Stan Jones, you're such a champion, are you there?

  I'll get the screenshots by your request and answer tomorrow morning, Lun Pacific time 7/27.

  Thank you

  Brian Patterson

  DVD - IT Media Services

  N. Hollywood, CA

  

  As always, I'm on a deadline.

  The part of the motion MUST BE the bottom (i.e. its own layer outside the button group). Do not use the prefix % etc. You will have only a = 1 in the Group of buttons and a background layer.

• Automatic graphics card switching

  How can I activate the graphic card automated switching, where the system chooses to use the Nvidia card or integrated graphics card Intel?

  I recently bought a Lenovo Y580 and installed a 120 GB SSD with a new installation of Windows 7. I downloaded and installed all the drivers from the Lenovo site, but am still unable to use the button "graphics" on the laptop; the button that is near the right speaker. I take this means that my Y580 does not switch between Intel and Nvidia.

  You must press the button revoery before startup to enter Bios MEMU. It forms that you want to move down the list of Configuration. can search for graphics device. Make sure that it is on the graphics of swichable instead of the graphics card UMA for the active card Nvidia graphics.

  

  Also in the Nvidia control panel you need to peak each program individually so that the switchable graphics will work on INtel or Nvidia.

  

• On the problem of button ToolTip

  Hi all

  Really appreciate using Muse earlier, such a tool at the beginning of it's life cycle.  However, I am a bit stuck.

  What I'm doing:

  I have 3 graphics.  I wanted to have a scroll effect AND a reversal of a slightly different image.  It did not seem possible so I re-did the gfx as png with transparency.  Then I put the chart that I wanted that the effect of scrolling of filling melts his own boxes in a layer under the png.  It worked very well!  I had my scroll effect AND my working capital change of State.  Now if there is an easier way to do it, I'm all ears!

  Now, I want to be able to click on each box and trigger a separate Panel to appear below with the relevant information.

  I achieved this goal by using the ToolTip widget.

  Problem:

  I did triggers the ToolTip the same size that the chart buttons including no fill obviously, so you can always see the button/graphic effect and scroll, but since they are covering the graphics I do not receive my substitution effect, because the mouse probably never "touch" buttons directly.

  I hope that there is a way around that I'm too tired to see easy

  Any help much appreciated.  Even to tell me I'm a fool to do that!

  Thank you

  Ian

  Hi Ian

  Have you tried to use the image as the fill for the triggers and then define States, you can use another image for a different State, so that when the mouse action will be the trigger, it would show that the States defined images.

  Change state with scrolling is not possible directly in Muse, but you can play with the opacity, with scrolling of the object it melts there entry/out indeed.

  Thank you

  Sanjit

• How can I centralize text on the button?

  Hello

  I made the button graphic using some effects of filling and then wanted to add text to it. Of course I could just put a block of text above and group them, and then convert it to button, and which works very well. The problem is when I want to add the substitution effect. I just wanted to add a simple glow effect for this, but if I used a component grouped, it places the glow effect on two points in the group, including the text, ruining the graph.

  I can type text directly in the graph button to avoid these effects of doubles, but then I can't align the text vertically in the button, because unlike the blocks of text, graphic blocks do not offer a vertical alignment option.

  The only viable option seems to be to place and graphics adding to the effect of substitution of a file, which seems to be too complicated and messy. Intuitively I would have thought a rollover State could be created simply by dragging another graph in this position - but that is not possible either.

  Anyone has any advice on how to achieve this?

  Jason

  [edit]

  I solved the problem by using the vertical offset, but this doesn't seem to be the right way to go about it for me...

  JasonDD210 wrote:

  I can type text directly in the graph button to avoid these effects of doubles, but then I can't align the text vertically in the button, because unlike the blocks of text, graphic blocks do not offer a vertical alignment option.

  Try this: do not apply the glow effect to the group, only apply it to the shape of the background. To do this, select only the background shape with the direct Selection tool and open the effects window.

• Button problem on

  Hello

  in my flash movie, I have a few menus items that are intended to change color when the user hovers over the.

  The menu items are cans of classic text in button symbol, in which the color of the active state is white and the color of State reversal is orange.

  When I roll over the text it shows the orange if the mouse pointer is on a pixel opaque text, while it shows the white of the State of State if, for example, I drive on the hole of a character from "o".

  The same thing happens when I roll over a button graphic with transparent parts.

  Is there a way I can trigger the State flew over the area full clip instead of on the opaque parts only?

  Thanks in advance for any help!

  Alessandro

  create a rectangular shape for State of success your buttons.

• How to make a document visible through button click class.

  package

  {

  import flash.display.MovieClip;

  import flash.display.Sprite;

  import flash.events.MouseEvent;

  import flash.events.Event;

  import flash.display.Graphics;

  /**

  * ...

  * @author Alex

  */

  enable/disable/public class extends MovieClip

  {

  private var button: MovieClip;

  private var button2:MovieClip;

  public var myClock:AnalogueClock;

  public void toggle (): void

  {

  button = new MovieClip();

  button.graphics.beginFill (0xFFCC00);

  button.graphics.drawRect (0, 0, 80, 20);

  button.graphics.endFill ();

  button.useHandCursor = true;

  button.buttonMode = true;

  button.mouseChildren = false;

  Button2 = new MovieClip();

  Button2.Graphics.beginFill (0xCC0000);

  Button2.Graphics.drawRect (0, 0, 80, 20);

  Button2.Graphics.endFill ();

  Button2.useHandCursor = true;

  Button2.buttonMode = true;

  Button2.mouseChildren = false;

  button.addEventListener (MouseEvent.CLICK, buttonClickHandler);

  Button2.addEventListener (MouseEvent.CLICK, buttonClickHandler2);

  this.addChild (button)

  this.addChild (button2)

  this.addChild (myClock)

  }

  public function buttonClickHandler

  {

  This.Button.Visible = false;

  This.Button2.Visible = true;

  this.myClock.visible = false;

  }

  private void buttonClickHandler2(event:MouseEvent):void

  {

  This.Button.Visible = true;

  This.Button2.visible = false;

  this.myClock.visible = true;

  }

  }

  }

  Comes with an error indicating that the child parameter must be non-null, don't really know what is going on any help will be greatly appreciated

  myClock does not exist when the line 52 runs.

• Draw several buttons

  Is it possible to use a loop to create 3 buttons on the stage and add text to them?  That's what I've worked with, but it creates just one button and I don't know why.  Can anyone help?  (For some of them, I added a button [j] and I get an error when I do it is ReferenceError: Error #1069: property not found 1 on flash.display.Sprite and there is no default value.) Thank you.

  CODE EXAMPLE

  function drawButtons (): void

  {

  var textLabel:TextField = new TextField();

  for (var j: Number = 1; j < 4; j ++)

  {

  Button.Graphics.Clear ();

  button = new Sprite();

  button.graphics.beginFill (0x000000);

  purple color;

  button.graphics.drawRoundRect (0, 0, 80, 25, 10, 10);

  x, y, width, height, ellipseW, ellipseH;

  button.graphics.endFill ();

  Button.x = 725;

  [j] key there = 275;

  this.addChild (button);

  button.buttonMode = true;

  button.useHandCursor = true;

  button.mouseChildren = false;

  textLabel.textColor = 0xFFFFFF;

  textLabel.x = 10;

  textLabel.selectable = false;

  textLabel.defaultTextFormat = textFormat;

  this.button.addChild (textLabel);

  If (j == 1)

  {

  trace (j);

  Button.y = 275;

  textLabel.text = "A";

  textLabel.y = 5;

  Add reply button Listner

  button.addEventListener (MouseEvent.MOUSE_DOWN, answerA_MouseDown);

  }

  If (j == 2)

  {

  trace (j);

  Button.y = 300;

  textLabel.text = 'B ';.

  textLabel.y = 5;

  Add reply button Listner

  button.addEventListener (MouseEvent.MOUSE_DOWN, answerB_MouseDown);

  }

  If (j is 3)

  {

  trace (j);

  Button.y = 325;

  textLabel.text = 'C ';

  textLabel.y = 5;

  Add reply button Listner

  button.addEventListener (MouseEvent.MOUSE_DOWN, answerC_MouseDown);

  }

  }

  }

  delete:

  Button.Graphics.Clear ();

  and make sure your scene is large enough (~ 760 x 350) to see your buttons.

• How to create a button in AS3?

  Hello everyone

  How to create a button in the action script 3 and handle the click event?

  Thank you

  Maybe this will help you get started.

  import flash.display.Sprite;

  import flash.events.Event;

  import flash.display.Graphics;

  var button: Sprite = new Sprite();  Sprite to act as the image of the button.

  Set the color of the button image

  button.graphics.beginFill (0xFFCC00);

  The value of X, Y, width and height of the button image

  button.graphics.drawRect (10, 10, 200, 60);

  button.graphics.endFill (); Apply the fill

  this.addChild (button);  Add button Sprite to the stadium

  button.useHandCursor = true;

  button.buttonMode = true;

  button.mouseChildren = false;

  button.addEventListener (MouseEvent.CLICK, buttonClickHandler);

  function buttonClickHandler

  {

  trace ("button clicked!");

  }

• Graphics optimization

  Hello.

  I have a button graphic that consists of a square of rounded corners, four thin rectangles, and about twelve lines (1px stroke). Each of the lines and the thin rectangles have the same width in Illustrator, with even the space vertically and centered in the square. The lines were grouped separately from rectangles and everything was in its own layer. I imported this button with the rest of my comp in catalyst.

  Whenever I try to optimize the image, something moving either 1px upwards or downwards. It also changes the width of the lines at random - 1px. I changed the width to be equal and try to align horizontal centers, but everything still seems distant. I tried to use a guide and aligning the centers of all the forms and he still does not really.

  I've also grouped objects differently, then optimized, then created the button, but every time something moves.

  Any troubleshooting ideas would be greatly appreciated!

  Hi Tigressa,

  You are probably using in what we call "snap to pixels" questions.

  I supported the placement object subpixel very accurate because it can produce for print (where pixel doesn't really count). However, these objects blurry when displayed on a computer screen (where import pixels). You can see this simply by drawing a rectangle in artificial intelligence at 100% zoom. Objects in CF should be aligned with the boundaries of the pixels because it generates exclusively to a computer monitor. When you import and manipulate the work CF it automatically snaps to pixel boundaries. That's good because your fuzzy rectangle will become blurred, but it is not very good because small tedious objects seem not quite right. This is probably what is happening for you.

  The best method to maximize faithfulness is to ensure that all objects are aligned on the limits of the pixels in artificial intelligence. This has some subtleties, you may need to experiment to be able to do this effectively. The trap more obvious that I know is that I aligned rectangles from the center of their shots, while FC them aligns to the edge of the race. So if you have a 1px stroke, you may need to place 0.5px out of HERE would naturally place anywhere.

  Good luck!

  -Adam

• Standby does not work on satellite

  Hello
  I think I have the same problem that TSC, the function of sleep is not enabled on my laptop. When I click, start, stop - the standby key is "grey", IE. I can't click on it, I can only click on stop or restart.
  In the toshiba power saver options, the wait cursor is also "grey" in each profile, so I can't activate it.

  «In normal power saving options, clicking on the Advanced tab is not raise an option ' ' activate Standby ".» All that there is the options of what to get I hit the power button or close the lid. On closing the cover option (which is used to put my laptop on standby) it only has now an option, "do nothing". It is not yet all that exists.

  Please please can someone help?
  My laptop is overheating and the fan made such a noise if I just leave it on, and I'm tired of having to launch and shut down five times a day.

  Thanks in advance!
  Jenna

  Hello Jenna

  I assume that your laptop is not preinstalled with recovery media just with your own installation of the OS. Am I wrong?

  As far as I know after sleep button graphics driver installation must be enabled. Hibernation (support) option must be enabled manually, but waiting has to be there.

  I put t know which satellite you have, but of course, the device must be cleaned properly. Remove the unit from the dust will be able to take a breath and cooling fan will not run constantly.

• G6 2255 ev Pavilion: drivers for windows 10

  Hello
  I recently bought an SSD.
  so, I want to put windows from the start and I need all the RIGHT drivers for my laptop.
  I don't want to put bad drivers and will need to unistall them later.
  So I need the drivers for my laptop, 10 64-bit windows.
  could you tell me the exact drivers I need?
  the basic only... to work correctly!
  Thank you for your time.
  also, I would like to know the thickness of my dvd player, so I can buy a shopping cart of DVDs to my hard drive.
  Thank you once again!

  HP only provides drivers Windows 8 and 8.1 of Windows for your model. However, I have an older G6 Pavilion provided with Windows 7 installed, and I did it with success a clean install of Windows 10 on it. Since your computer was made for Windows 8, I assume that the upgrade process would be smoother for you.

  A little tip: I recommend that you have a wired Internet access available to your computer during the installation process so that Windows can download the drivers for your computer. I tried without a connected network cable, and I found myself with no Internet capacity after installation. I had to do another clean installation with a connected network cable, and this time the installer found all the correct drivers: map Wi - Fi button, graphic, touchpad, webcam, reader of cards, all. I didn't have to install anything manually.

  I can't advise you on the caddy HARD drive for your DVD burner, but I've seen messages on the subject in these discussion forums. I did replace my HARD original with an SSD drive.

  You can look at my profile and read my other posts for questions, I met with my BIOS. I hope that you will not face this problem because your machine is more recent.

  Good luck!

• difference between mathscript and matlabscript

  Hi iam new to labview and learning n do labview project

  What is the difference between mathscript and matlabscript

  I want to do the simulation using matlab

  How can I do

  If one suggests this

  Please answer and provide assistance so that I will perform my project...

  With the LabVIEW MathScript node, the blue rectangular region, you
  can run scripts from files ".m" of your graph (known as LabVIEW programs
  virtual instruments or screw). You can use the MathScript node

  to insert text algorithms in a VI and then use the LabVIEW
  environment of graphical programming to instrument the scripts by adding
  buttons, sliders, buttons, graphics, and other user controls and
  indicators.