Folder hierarchy: how to create and modify a folder hierarchy?

Similar Questions

• How to create and modify an itemRenderer with AS3

  Hallo. In fact, I have this code:

  "" " < s:List id ="myList"width ="92%"height ="85%"left ="44"top ="80"skinClass ="skins.mioList_skin">

  < s:layout >

  "< s:VerticalLayout gap ="5"""/ >

  < / s:layout >

  < s:itemRenderer >

  < fx:Component >

  < ns2:myItemRenderer / >

  < / fx:Component >

  < / s:itemRenderer >

  < / s:List >

  This code works perfectly. This is the mxml code. I want to create exactly the same structure but with cause of as3 code, I need to change (because the component is created) the itemRenderer. Specifically, I have a variable named listType which can take 3 different values and for each value, I have a different itemRenderer. How can I do this with or without as3?

  Thx for all

  Max

  All properties need to be configured at the same time:

  mioItemRenderer.properties = {myVar1: 'myText1', myVar2: "myText2"};

• How to create and boot from a separate removable usb drive?

  Do some testing software and wish not to overwrite my MBR disk (c :))

  It's a matter of Google:

  http://www.google.com.au/search?hl=en&source=HP&q=How+to+Create+and+boot+from+a+separate+Removable+USB+Drive&btnG=Google+Search&Meta=&aq=f&OQ=

  Help us with the problems here with the Vista operating system installed.

  See you soon. Mick Murphy - Microsoft partner

• How to create and apply a vc in jdev 12.2.1?

  Mr President

  How to create and apply a vc in jdev 12.2.1?

  I did like this, but do not know what my name of vc, it's VdetViewWhereCriteria.

  My name of vc is

  

  Concerning

  In the AppModule, you must select the view criteria.

  Open AppModule--> Data Model--> Select the VO (VdetView1)--> press the Edit button--> shuttle view criteria

  as:

  

• [FLASH] How to select and modify objects on separate layers.

  Hello

  I just started to use Flash and I've been looking for hours now how to select and modify unique objects (PNG in my case) without constantly accidentally select the object which is the most prominent or the higher layer.

  Whenever I want to change tell an object in the back, he always chooses the further object, making it impossible to change the return object. How on earth do I do this?

  This program looks extremely complex for what I want to do with it, but I can't find a software simple.

  All I want to do is animation frame-by-frame to an existing character on the parts of the body of the png a couple. I want to just move and rotate these parts of the body separately image by image. Is not possible in this program?

  It is very feasible with flash.

  for an object in a layer until you do NOT want to select Lock (the lock symbol column) or hide (the symbol of the eye column) as a layer.

  

  [becomes Adobe Creative Cloud CC Pro Flash - général]

• How to create and use Webservice using WSDL controls in weblogic portal10.3

  I have WSDL, how to create webservice control using WSDL in portal weblogic 10.3 and use these controls to call the Web service methods?
  Please give me the links of documents for this.
  
  Thank you
  
  Published by: user9041086 on August 12, 2010 09:26

  See the discussion below

  How to create and use Webservice using WSDL controls in weblogic portal10.3

  Thank you
  Vincent Sarvabatla

• How to create and delete partitions automatically?

  How to create and delete partitions automatically?
  The environment is (10.2.0.3) 10g Oracle on the RHEL4.0 system.
  I want to partition the table of MESSAGES by date (NUMTODSINTERVAL(1,'DAY')). One partition per day. Because the table is huge, only 2 partitions (as of yesterday and today) are required to be available online. All partitions as earlier than the day before will be saved, and then dropped. I want to do the partition to create and delete the work performed automatically. How to do?
  
  Thank you

  junez wrote:
  Could do in detail?

  Here is an example of a procedure (part of a package) that adds/add a partition to an existing partitioned table schedule:

  procedure AddHourlyPartition( tableName varchar2, hour date, partitionName IN OUT varchar2 ) is
          sqlCreate       varchar2(4000);
          d               date;
  begin
          partitionName := GetHourlyPartitionName( hourly );  -- name of partition to create
  
          if existsPartition( tableName, partitionName ) then
                  -- nothing to do
                  return;
          end if;
  
          d := TRUNC(hour,'hh') + (1/24);                                -- upper date limit of the partition
  
          sqlCreate :=
          'ALTER TABLE '||tableName||'
                  ADD PARTITION '||partitionName||'
                  values less than
                          (TO_DATE('''|| TO_CHAR(d,'yyyy/mm/dd hh24:mi:ss') ||''',''yyyy/mm/dd hh24:mi:ss''))'
          ;
  
          ExecSQL( sqlCreate );
  
  end;
  

  The partition is safer to create partitions according to the experience?

  It is always better to write good packages in PL/SQL. Packages can (and should) use the application programming interfaces (API). Because our partition custom package that allows the management of partition. Or a messageLog package that allows for logging of application messages, errors, and debugging messages. Or a Notification package that allows to be send by email or SMS notifications. Etc.

  Design and software development, we should always approaches a "+ Lego mentality +"-which is to create building blocks ("+ Lego bricks +") which can be used and reused over and over again. Modularization is of crucial importance in software engineering as the result is not only of reusable code, but also the code that is easier to maintain, extend easier and easier to debug.

• Separate, create and modify a form IOM

  Is it possible to separate create and modify in IOM forms? I want to stay in shape to create as it is. However, when an administrator tries to edit a user, I don't want that they are able to update certain fields. So we have to create the field will be a text box, but on an update, it will be a label.

  If you try to hide from metadata.xml then it will hide for the two JSPS, as the two JSPS are dynamic.

  So if you try to hide this JSP which I told you then hide it for edit profile (including this JSP) JSP only. :-)

• How does "create and wire case unwired? I can't do anything...

  OK, I have a structure with a ton of events of the event.

  I just added a value that passes through IT. This value is a shift on the outside loop register.

  I see that when your right click the tunnel on the event... There is the switch to turn off 'Use Default if not wired'.

  I also see some options that seem to be doing what I want to do... and that's for cable all unwired connections on the other events with "Entry Tunnels Linkted"-> "create and wire Unwired case."

  When I click on it, the cursor changes to a new form... but here... I can't figure out how to make it work... I tried to do a right-click on the tunnel 'broken' for this purpose... I tried a left click in an event that is unwired... but nothing.

  Can someone help me out here... I think that's what I want... but can't make it work.

  Thank you in advance,

  Cayenne

  After clicking on create and thread, click on the terminal across the structure you want to feed the exit tunnel.  If it is already wired directly to the other tunnel, he'll know what you mean without the extra step to choose the side of the entrance.

• How to create and configure separate user accounts in Windows XP?

  I had my computer cleaned because of viruses, how create and configure user accounts separate?

  See if the article on the link below answers your question.

  http://support.Microsoft.com/kb/279783

• HOW TO CREATE AND MANAGE APPLICATIONS OF PLANNING CLASSIC ON EMP 11.1.2.4

  Hi all

  We installed and configured 11.1.2.4 EMP, and was happy to work on planning that was created by using the workspace EPMA until we came across a requirement for reports plan type, coming to the point:

  1. in the EMP 11.1.2.4 how to create a classic application and how to perform administrative tasks, any suggestions would be helpful.

  2 if we conduct EPMA planning application, then how to convert it into classic?

  concerning

  Shahrukh

  Try to run it with - Setting of Applications Using Planning Application Administration

  Is what I'd do to convert a conventional application of EPMA

  Set the property to true EDIT_DIM_ENABLED - Management of Dimensions in Planning Applications deployed

  Restart the planning

  Extract the application of planning using LCM.

  EDIT_DIM_ENABLED property set to false

  Restart the planning

  Remove application EPMA

  Import the backup LCM to build the new classic application.

• How to create and print an 8 x 10 Headshot?

  I use LR CC and trying to learn how to create a picture of head of 8 x 10 with the names of customers in the text at the bottom of the photo.  8 x 10 must also have a white border around it.  Thanks in advance for anyone who can help me with this!

  The steps shown above do not address the case when you export the picture for later use

  1. Photos are automatically 'saved' in Lightroom; There is no need for to run you a "Save" command (or y at - it a "Save" command). File-> export creates a copy of the file on your external (or other) Player for later use. To include a text on the pictures, you need a plugin called Mogrify
  2. Ignore these instructions, they do not apply to your situation. You can apply corrections to several photos in any number of ways. You can do this via copy and paste at the bottom left of the develop module, buttons or by using automatic synchronization (see Auto Sync ' Blog of Julieanne Kost ")

  In addition, if you want to print at 8 x 10, you have to first harvest to a lengthening of the 8 x 10.

• How to create and animate a viscous black oil?

  Hello!

  
  Can I ask you a question?

  I want to create a viscous, oily liquid and that animate it so it "wobbles".

  But I don't even have an idea how to create the chart.

  I have attached a picture. Here you can see how the liquid should look like.

  (In the background. Red dots and other stuff important deosn)

  It would be so great and very useful if someone have an idea and would share.

  Thank you for the advice,

  best,

  Peter

  

  If you talk about the background, I would like to start by creating a shape with two fillings layer degraded at right angles to each other. The upper gradient would be defined to multiply if you end up with something like this:

  

  Then I would start to play with things like Action Ball CC or Mr Mercury to get something like that which moves slowly:

  

  You could then compose before as a layer and add something like CC glass to end up with something like this:

  

  Then you try just to get the look you want. Given enough time you could replicate the appearance of the background very closely. There are a lot of simulation and distortion effects to play with. The trick is to start with something that will give you different colors. Creating a rectangle with a gradient and then duplicate the gradient and play with angles and blending modes can give you a good place to start.

• Data Modeler: how to create and use the collection type

  Hello
  essentially of departure I don't understand how (for example) create and use the data based on the type of data varray type.
  
  Please notify.
  Thank you
  Andrew

  Hi André,.

  You can create new types of collection (varray/table) in two ways:
  (1) in the browser - find 'Types of data' > 'Types of Collection' node menu dropdown - there just 'create new collection type' it
  (2) in the types of data model diagram - you can create collection "some type structured" or collection of references to the it - use 'new Collection... '. "tool and click first on sight structured type and after the structured type that will contain the collection - new attribute is added to the latter and if there is none this type of collection already didn't set the new collection type are created and you can change it later.

  Philippe

• Timestamp "Created" and "Modified"-&gt; time zone?

  In the fields created by and modified by, what determines the time zone of the timestamp? It is the user who made the action, or is it determined by the location of our server Oracle hosted in Texas?
  
  Thank you!
  
  Mike

  Mike, this is the time zone of the user who creates or change the record.