Folder offline problem WIn7 and Lenovo support here?

Similar Questions

• W700 doesn't start, the firm Lenovo support - can anyone help? Please?

  Hiya,

  Major desperation setting in, the someone can help?

  I put my W700 standby a few moments, but it locked to halfway through the sequence and don't wake up again or close. So I had to stop it by pressing the power button.

  Now, it will not work. He tells me that it cannot find the operating system. And Lenovo support closes at 5:30...

  I tried to call Lenovo in the USA, since they have a service 24 hours a day - but don't talk to me because I'm not in the USA. The guy told me to take off the AC power for 'a little' (already done) or to remove the battery for five minutes (which is now).

  But I'm not optimistic that will help you. Someone at - it ideas? It is currently running 64 bit Vista. Or at least, it was.

  Any assistance is welcome. In fact, good beer will be next if anyone can fix it.

  I'm trying hard not to sound too desperate, but I'm having a panic now!

  Hi again,

  Another update: fixed! I finally managed to persuade the machine to boot from the DVD drive and run the software Windows repair. This brought me back into the PC, then I took a few backups to disk and ran diagnostics. USB drivers were assommees, but except that almost everything worked very well.

  As I had suspected, the problem has been attributed to a procedure of a translation package that I use - he was known to have problems with Vista 64 bit. I never heard of any crashes catastrophics PC makes them, but then again I don't think that those who are released!

  Lenovo 'support' was quite poor. Finally got their hands on them in England this morning to be told that my warranty had not been recorded by the company, that I bought the machine, so I had to wait 3 hours while they checked that I had a W700 real and not a box £ 2500 at low prices from the market. Or something. Date to which I had mostly upward and run anyway, after a sleepless night of the insistence of the buttons and the endless reboots!

  In any case, thanks to all who responded - your help is valuable, and I really appreciate it. If I can help in return I would willingly - but I suspect that your computer knowledge is far superior to mine!

• Lenovo G510 problem wifi and ethernet

  Hello!

  I have two Lenovo laptops, G50 and G510. The first works perfectly except the second after 10 months started yesterday which have problems with the network adapter.

  The Wi - fi button is grayed out and cannot be opened and the ethernet port can not read any cable. I tried all the solutions I found on the web (deactivation and activation devices, uninstalling and reinstalling the drivers, updating the system and the system format) but failed. The ethernet adapter does not appear in network devices after the restoration of the system to its point original (format), even after installing the drivers for the network card I found in Lenovo support site. And all this happened yesterday when the only change in the system was a windows update. However if this was the problem of the restoration of the system, update and format should have fixed the issue.

  I used windows 8.1 but now after the format I use 64-bit windows 8. Could you give advice? Could this be a hardware problem? I'm desperate here.

  Really weird that both had fault at the same time. Try the following out the battery and the power source and press the power button without any power supply 5 times. And restart again.

  If not try to work the boot in safe mode with network and see what is happening here. In the login screen hold down SHIFT key and choose reboot option. you will see Win8 advanced options.

• I'm going to erase my media Cache files before you start a new project, but when I go to/Library/Applications/Common/there is no media Cache folder. I have never had this problem before and am 10.9.5 OS and using clues CS6?

  I'm going to erase my media Cache files before you start a new project, but when I go to/Library/Applications/Common/there is no media Cache folder. I have never had this problem before and am 10.9.5 OS and using clues CS6?

  Hi Dave,.

  The location is ~/Library/Application Support/Adobe/Common to be exact.

  Make sure that you type the TILDE (~) key.

  When in the Finder, click the go > go to folder... > Type ~/Library and navigate to Application Support/Adobe/Common

  Thank you

  Regalo

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Urgent: Lenovo support minimize automatically and more issue

  Dear

  I need help for the rest

  1. Lenovo opens the solution when I click on product registration, a new "Lenovo support" window, but it minimizes automatically, I don't know what issue, please let me know the solution
  2. left mouse mats, click on stop working sometime after right click some time work stoppage, they don't even work buttons, but mouse curson go touchpad and keyboard works very well, I restart, then to solve.
  3. about 3 times it happened I left laptop and when I was back after some time, he was arrested. amazing to me.

  Please help me urgent

  
  

• 5520 power problems on and offline printer.

  Run PC - Windows 7 64 bit (all updates installed) or Ubuntu 12.04 LTS (not all updates installed). Photosmart HP 5520. Router Belgacom B - Box (latest updates installed). Norton 360 anti-virus (all updates installed).

  Two problems:

  1. The printer is a problem to turn on.
  2. Guard printer goes offline (using Windows 7).

  Problem 1 - printer sometimes does not respond to the power button 'on '. The solution seems to be to remove the power cord from the wall outlet for a few seconds and then reconnect the power cord. The printer then starts up, but it is a necessary power reset (remove the power cord from the power outlet while the printer is enabled) to stop the continuous problem.

  Problem 2 - printer keeps going offline when connected via Wi - Fi and is a serious problem. I carefully studied the messages of the forum on this subject and tried all solutions without success. I have all the latest HP software and install the drivers, and I reinstalled the software twice. I have disabled the firewall on the router and Norton 360 with no improvement. The printer Wi - Fi 'print info' print page reports that there are no problem. HP print and Scan Doctor points out that "all out very well with your product", but print test page does not work as the printer is offline. "The wireless network test results" print page also reports that there is no problem.

  The only way I can get to print is by disabling the WiFi of the control panel of the printer and then turn it back on but it works for a few minutes before the printer is reported to be offline when I want to print additional pages.

  The functions of the printer correctly when I boot Ubuntu instead of Windows on the PC.  This seems to suggest that the problem is not with the router or printer.

  There is clearly a problem of settings in the PC or software, and in view of the large number of other messages from people reporting the same problem on the HP forums and other forums, so it is surprising that HP took no steps to correct the situation.

  Thank you very much for any help received.

  I am pleased to say that the printer offline problem has been resolved.

  A big thank you to those who helped.

  Michael0369

• Zune and Windows 8 "error reading the Zune software cannot access important data on your Zune." Try to disconnect and reconnect it. If the problem persists, contact customer support. "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  Message error "the Zune software cannot access important data on your Zune.

• Upgrade LR6 bought, when you enter SN for LR4, message "the serial number you entered is invalid." Please try again. If the problem persists, contact customer support. ".  SN entered for existing product has been checked and is OK.

  I got the serial number of my Adobe account LR4.  Setup for an upgrade to LR6 will not accept the serial number LR4.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Sync Center gets stuck saying "pending sync", never synchronizes the files on the shared folder offline

  Hello

  I have a laptop (Compaq 8440) running Windows Vista Enterprise (not yet upgraded to SP1).  I have a shared folder mapped to the N: drive on my laptop.  This shared folder is located on a computer on my home network.  Every day, I move my laptop between my home network (wireless) and my work network (cable intranet).

  I scored a subfolder in the shared folder available offline.  It worked for about two weeks, but now when I try to synchronize with the shared folder offline files, Sync Center has constantly "waiting for synchronization" status  He never goes out with synchronization, regardless how long wait.

  I tried clicking "stop"button in Sync Center, but this does not prevent the synchronization.  I do not see error messages or the situation in Sync Center.

  I tried to restart the laptop, but nothing helped.  I tried to disable/reactivate the wireless connection, but nothing helped.  I can connect to the shared folder and discovers the other directories that are not 'available offline", is not a connectivity problem.

  Thank you
  Jason Fritz

  Hi Jason,

  You can try to remove the sync partnership and add it back.  Who can get things working again.  See the following link on how to put an end to partnerships, then in the section above, how to create them.
  http://windowshelp.Microsoft.com/Windows/en-us/help/1074e034-1bcf-4dfb-93c3-46ec7df97d371033.mspx#E6E

  Introduction to offline files.  Contains links to the different problems of synchronization.
  http://windowshelp.Microsoft.com/Windows/en-us/help/93a550df-34cd-4497-85d0-8732602f59591033.mspx

  Troubleshoot synchronization issues.
  http://windowshelp.Microsoft.com/Windows/en-us/help/608639ce-27C8-42d5-AD3A-4bc641c9ca711033.mspx#E1AAC

  Please let us know if that helps the issue.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Desperate cry for help - Win7 and SBS 2008 sharing network/disconnections

  Hi all

  I am facing a problem of bad guy who frustrated me for several weeks now!

  Scenario:
  1 Windows Server 2008 SBS Premium Edition (not R2)
  Network share: \\Server\DBShare
  also mapped as J:\ on client computers
  Share contains some databases Access 2002 ("access xp") back-end (BE)

  2. customers: all diversified machines: XP, Vista, Win7, etc...
  ALL have Access XP (2002) installed (runtime) and run a horrible old 13 year front-end (FE) which has been spasmodic developing since 1997. It is mission critical and there is no budget to rewrite is because it is sprawling and has its hooks in each device, procedure, policy and activity that we do.
  Front-end is run locally, lies in the path of users % appdata %.

  Problem:

  Currently 8 x peripheral non-Windows 7 system to access every day, stay connected 24 hours a day and never give disk errors or network.

  ANY windows 7 machine is guaranteed to give disk or network error messages at some point - from 30 minutes to 15 hours by opening the front end and be left idle.

  NOTE: I was sent here on the forum to access because they thought that Win7 forum would be more appropriate. For non-access users, Access is like the Canary in the coal mine
  with regard to the problems of network connection. Even a slight network disturbance causes to complain about errors on the network and to require the connection to database
  to be re-created, data loss and potentially damage this database to the file system.

  I had all the world put in place using j:\variousdatabases.mdb, but read it as one
  Nono so I scripted a change in all the drives mapped to UNC paths in the
  connection of these tables property.  With this change, sometimes I just
  get an "odd" error disk or network, then am able to reconnect - but this
  bothers me terribly because 1. It can do damage to the db, 2. He
  means that I must write to this trap for more than 300 forms and even the management of errors
  so I think that there will be some things that I can't trap and 3. It is also SOMETIMES
  do not reconnect and I get messages repeated... or even an appcrash.

  When I say EVERYTHING, I mean I have 4 test devices: a work station, a Mini PC, a
  laptop and a netbook. This started as a 'test upgrade' to Win7 on the
  post work - but after this Show-stopping number, it became a desperate
  Troubleshooting jamboree, involving more than systems and other tests, because the
  solution seemed just around the corner.

  Now, a week later, I'm ready to give in on computeres forever and go live
  under a bridge, since I am unable to solve this problem and have already invested so much
  a lot of time into it!

  Here's what I think, that I decided to go out and why:

  Not a problem of network infrastructure.
  I can unlug a minipc with vista on it (same exact material) and connect it to the
  the ethernet port on a win7 test evil machines and it plugs.
  Fortunately for more than 24 hours. All the machines are on the same switch 24 ports. All the
  nonwin7 machines work as if in a dream, even when moved to the port/cable
  used by the machines of win7.

  Not a problem of a server NETWORK card.
  See above. Other devices not win7 Purring immediately without disconnecting.

  Not a server problem.
  SBS2008 works * Virgin * for the last 7 months. Only the reason for
  glance has been recently to try to resolve this problem of fools...
  All clients not win7 are happy as can be, always.

  The EM is not (apparently horrible?) dynamic TCP stack scaling or unloading on the
  SERVER.
  EVERYTHING in the driver for the card that could be discharged (and has been by default,
  no problem on other non-win7 clients) has been decommissioned. I also have
  off the chimney and any other devices of automatic setting on the server.
  (FYI - all STILL happy nonwin7 clients, server shows no significant increase)
  in the CPU usage)

  The EM is not (apparently horrible?) dynamic TCP stack scaling or unloading on the
  CLIENTS.
  Doing the same thing again on clients - auto tuning off the coast, where the unloading off
  possible. Latest installed NETWORK card drivers that give many options of unloading
  to turn off.

  No offline files
  These have been disabled on the server, on the client and in the group shares
  policy just to make a point.

  Not the MiniPc / the workstation laptop / Netbook / la
  Seems unlikely that all 4 would not work because of the material error AND
  drivers of offensive, but I ran out of ideas - so I photographed the MiniPC win7
  and put Vista on. To my great regret, the Vista OS on the same device works
  perfectly. Recreate the image of the OS Win7 and BOOM - same problem.

  No IPv6
  Disabled on the clients and the server

  No IPX/SPX
  Not installed on the server

  No network traffic
  (happens when I'm all but 5 computers off tension and nobody in the)
  Office as well in the middle of the day when users are 'use'.)

  Not the time of day
  Sometimes after 15 minutes in the middle of the afternoon or after 6 hours to
  04:32 - does not coincide with the events of on the server or the client error log, does not
  coincide with DHCP renewals (which are in 2 weeks)

  No server autodisconnect
  The value - 1 both server and client (I know that's irrelevant on the client))
  I also tried to add a ffffff keepconn regentry (I know that the stated max is
  64 k, but it doesn't help me have the connection after 18 hours.)
  FYI - no effect with or without the keepconn registry entries.

  Not be able to save
  4 machines, 4 different ranges of stuff randomly to stop turning out - of
  NICs for windows power plans to simply disable acpi. Problem
  continues

  Not my version of Windows 7
  Tried our company VLK Win7 and my personal copy of win7 ultimate
  and the NetBook win7 Home premium. SAME SAME SAME

  Not my drivers up to date
  MS stock on old machines drivers that are not built for Win7 show me the
  same error
  Laptop and Netbook (the latter preinstalled by the vendor) also give the same problem

  It is not that I do not use the drive\UNC.
  I ran a separate script that does just a DIR() on file every 10 seconds
  and yet, I finally get disk errors.

  It is not that I am not query the database and the connection is time
  There is a database search all 2 minues in PA to check new data in a table

  This isn't a field/roaming profile issue
  I tried logged as a domain with the profile user roaming user admin not now
  the area, officially added to the domain and even laptops PCs
  not registered on the domain.

  It's not the system restore
  Disabled on clients

  Is not SMB signing
  This is disabled in server group policy and still the same problem...

  Help, please!

  Any ideas would be much appreciated!

  Thank you in advance to help improve my new year! & Happy holidays to those of you luck is not to be this troubleshooting!

  Alex

  Thanks diana,.

  I tried my luck in the Technet Server forum you suggested.

  For others who want to follow my progress, here is the link:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/thread/0527a084-1953-47f0-ae83-febb52af14fc

  Happy new year!

• No base - curve - bad performance ION S12 wireless - Lenovo support no help

  Hi forum,

  I received my Thanksgiving S12 ION contract last week.  The size and the format are perfect, overall performance, just as it should be, but wireless performance is unacceptable.  I work for IBM and have a T60P work laptop and two mobile Y430, all of which have the perfect full bars of signal wireless throughout my house.  But this S12 ION has only three bars in my office next to the wireless G router and only one or two bars in the next room.  For any other room in the House I can not connect.

  I checked that I have installed the latest wireless drivers.  It comes with those who is the latest on the Lenovo support site.

  I called technical support from Lenovo.  After waiting on hold, I've been connected, then dropped after another 30 minutes on hold.  The second time I have called, I was told that I had to turn on the wireless switch.  I told the tech that I was already logged and that the question was wrong signal.  He suggested to remove Lenovo readycomm, but which is not installed on this S12.  Finally, he told me that it's just a netbook, not a laptop and if I don't like what I should return it.

  I'm so angry at this poor support that I return it immediately, if it wasn't for the expenses of return of 15%.

  Does anyone else have problems with wireless?  I'm wrong about what is a nice wireless connectivity tool?

  At the price I paid, $399, I can this dump on eBay, but I am seriously disappointed.

  Hi Forum,

  I opened the wireless card slot after reading other forums of netbook that some had to loose antenna connectors. At first I thought that's what I had as one of the drivers, a black, was not seated. It turns out that the connector on the wireless card has been open curve.

  See photos:

  http://i241.Photobucket.com/albums/ff283/skier757/Lenovo%20S12%20wireless%20card/PICT0004.jpg

  http://i241.Photobucket.com/albums/ff283/skier757/Lenovo%20S12%20wireless%20card/PICT0002.jpg

  [IMG] http://i241.Photobucket.com/albums/ff283/skier757/Lenovo%20S12%20wireless%20card/PICT0004.jpg [LINE]

  [IMG] http://i241.Photobucket.com/albums/ff283/skier757/Lenovo%20S12%20wireless%20card/PICT0002.jpg [LINE]

  I folded the connector closed ring, reconnect the antenna cable, and now I have a signal. Thought you would be interested in the photos.

  I'm going to call Lenovo and ask them to replace the wireless card, because there is no guarantee the connector is not damaged, but it works fine for now.

• Turbo problems p 1 Lenovo vibe

  I am facing a lot of problems with Lenovo vibe p1 turbo for the last month and half, but still no support received from company 1) during the call, I had frequent breakdown of votes

  (2) frequent network drops

  (3) crash of the Dialer

  (4) many contacts were contacts but can see dialer

  (5) no support of the volte

  (6) the camera quality

  I tried formatting phone twice

  Phone reset but nothing solved my problems

  Contacted the service center they also saying flash software

  Hope Lenovo will solve these problems

  Please support those all these problems

  Hi Josepgreg,

  What version of software is on your phone? (Settings > about phone > the device information > Build number)
  If your phone has an available update, install it.

  Point 1,2,3:
  Generally, the 'network falls' and "telephone-outs" are caused by the SIM, not the phone itself.
  You can try to change the SIM card to your phone service provider.

  Point 4:
  What is common in the contacts, which are not shown? (same source as SIM or Google, etc.)

  Point 5:
  Not a problem, it is not supported right now. (In November, will be just the update which allows VoLTE).

  Point 6:
  Camera phone, it's not the best on the market, it is a mid-range phone.
  You can try another camera since the Google game application, some of them can improve the quality of the images.

• HP Deskjet F2280 all-in-one: color print images saved offline problems.

  When I print an image that I downloaded from the internet, the colors do not conform to the original (a lot of blue in there).  I printed directly from the printer itself, and that's fine.  I changed the color cartridge, did the cleaning, checked, I had download the correct software and tried to open the image in paint, but still not good.  I changed the setting to fast eco who, although not the bright, the image itself so more true to color.  Can anyone help please.

  Hi @anniegwenand welcome to the Forums of HP.

  I see that when you print images that you save from the internet, the colors are not what you expect and the printed output is more blue than the original. Because when you print directly form the printer (copy) the output is as expected, I suspect that the issue has to do with the print settings, a driver or a program that you are printing from.

  I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server. This will help isolate the driver.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer). The installation screen and the software opens and you can click on connect a new printer.

  If the fingerprints still don't match what you see on the screen, try to print in a different program. For example, instead of save an internet image, print the image directly from the browser. In bold, what brings the cause to wonder, when you save, you are printing on photo paper? Have you compared the print quality between an image printed on ordinary paper and a image on photo paper? If you use photo paper, and that's the only time where the output is more blue than expected, please try different photo paper. I know this sounds unlikely, but I seen the book be causing more time than you probably imagine.

  Let me know the results of your efforts at this point, and we will proceed if other troubleshooting is necessary. If something I suggested the problem, please click Accept button Solution below to report your post as solved.

  Thanks, I look forward to hearing back on your part.

• I do not have a Security tab, I searched my folder option control panel and don't see any file shatr etc.

  I do not have a Security tab, I searched my folder option control panel and don't see any file shatr etc.

  Hello
  1. don't you make changes to the computer until the problem occurred?
   
  I suggest you to follow the steps below and check if it helps:
   
  Method 1: To view the Security tab: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/acl_sec_tab.mspx?mfr=true
   
   
  Method 2: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/310747
   
   
  Hope this information is useful.