Folder vs block IO for DTX200?

Similar Questions

• Trying to remove the folders from Windows one system empty, but in error "is a Windows system folder and is required for Windows work.» It cannot be deleted. »

  My parents bought a laptop from a friend, and recently my father ran an antivirus program that came with multiple files in a folder that has been created by this friend. When you try to delete the folder a box appears that says "it is a Windows system folder and is required for Windows work.» It cannot be deleted. "But all the folders inside are empty and of no use to us. Help?

  The standard answer to questions that begin with «I bought a used computer...» "is you can do a clean install of Windows, because you know not what could be hiding somewhere in the computer.  In this case, it seems as if he is infected with something.

  Legally, the seller was required to give you a way to do this reinstall, but in the vast majority of the private sales of used computers, this requirement is simply ignored.

  If it's a laptop to 'mark' (e.g., Dell, HP, IBM/Lenovo) there may be a hidden partition on the hard drive that can be used to restore the computer to its "fresh from the factory" State.  Of course, this will remove all applications that the previous owner had installed after he or she has bought new, but you should still seriously to consider making such a restore, if the mechanism is available.

  What is the name and the version of the antivirus application that has detected the wrong files?
  What are the names of the files?
  What is the name of the folder that cannot be deleted?
  Are you logged on as a user with the rights "computer administrator" when you try to delete it?

  Assuming that you can not or will not do a clean install of Windows, I suggest the following (do not run scans at the same time, each analysis may take some time, depending on the number of files on the computer):

  Connect as a user with the privileges "computer administrator" and do a full scan with each of the following:

  http://www.eset.com/us/online-scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx (requires download)
  http://www.PCtipp.ch/downloads/Sicherheit/35905/multi_av_scanning_tool.html (page is in German, but the downloaded scanner is in English)

  Also download, install, update and run a scan complete with each of the following:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• How to block Facebook for specific users by IP in NSA 4600 Sonicwall

  Hello

  I want to block facebook and youtube for some users in network using the IP of the user's computer or a MAC and allow other remaining users access facebook normally in Dell Sonicwall NSA 4600.

  Kindly guide me how it is possible in the firewall settings. Thank you

  Osama Aftab.

  You must configure the App control rules advance for block & FB access to specific users.

  Following article will give you heads upward.

  It is said in this article during the configurations block: activate & user/group of users Include: all THE (IE block FB for all users). You can use groups to exclude the user to authorize access to few IPs/users.

  

• Cannot import the EXHD catalog to new mac error message: Parent folder does not allow for files to be created in the breast of this

  I have an old mac in 6 years that the battery exploded so I bought a new mac (Macbook Pro 13, 2015, running OS X El Capitan). I have an external hard drive that I backed up my LR5 the catalog and raw files on my old Mac. On my new mac, I have my EXHD plugged and the LR5 (of membership cloud of Adobe) running. I'm sailing LR5 to open the catalog on my EXHD do, essentially, on all my edits on my photos on my new computer. I get the attached message that it does not bc the parent folder does not allow for files to be created in the breast of the it.

  What should I do?

  Old mac still works so I was wondering if I could try to save the catalog on a USB (its about 4 GB) and rather than the new mac. Or try to save the EXHD catalog in a different way or something.

  Thank you very much!

  

  I copied the EXHD catalog to my new Mac desktop computer and then sailed LR5 catalog on my desktop. WORKED LIKE A CHARM!

• The current block size for a store of data in VMFS3 is 4 MB. Must upgrade thedatastore to VMFS5 and wants to change the block size of 1 MB

  The current block size for a store of data in VMFS3 is 4 MB. Must upgrade thedatastore to VMFS5 and wants to change the block size of 1 MB

  help me on this

  Create a new data store VMFS5 with a block size of 1 MB. Migrate all virtual machines store data to the new data store, and then delete the VMFS3 data store.

• Folder is not valid for import

  CS5

  Beginners Question: I downloaded DPS and Colin gray 3 beginners video tracking.

  When I try to import an articles, I get the message:

  Content generation

  The Frontpage folder is not valid for import

  In my Frontpage folder is only the Frontpage 724 x 1024 px and his name is Frontpage_tall.indd

  What I am doing wrong?

  Nina storm

  If you use the import option to add article, the problem is with your file names. To create an article based on frontpage_tall.indd, open the document and click on new in the Folio Builder Panel. To import it, rename it to frontpage_v.indd, follow other conventions described in the user guide and the import file.

• Access to a shared folder hard blocks VMWare Fusion (started happening recently)

  I have access to my Mac OS X desktop as a folder within my VM and have it run this way for years without problem. Sometimes in the past month, VMWare has started completely freeze/lock up when I try to open the desktop folder in Win7 or if I try to open a file from an application running in Windows. I get no error message, just a Beachball Of Death, and VMWare will eventually (or not) report that Windows crashed and offer to reboot. Sometimes I have to force quit (and kill several VMWare process) until I can restart.

  If I restart in Mode safe, I can open/read/write files very well. I can also 'mirror' of my office (instead of share) and it works very well in this way, too, but this approach is not practical as I have so more can see my normal within Windows desktop, as it is replaced by all the files from my Mac desktop,

  I couldn't find all the online articles that were useful for the resolution of this problem, and it's impacting on my ability to do my job.

  Again, this has been working fine until recently. As El Capitan has been recently updated and VWWare Fusion has been recently updated Windows gets patches every week, I'm not sure which, if any, of those that could have caused the problem.

  Suggestions welcome.

  Here is my configuration:

  MBP 15 retina, mid 2015 running OS X 10.11.5

  16 GB of RAM (8GB assigned to Windows)

  500 GB SSD 120 GB assigned to Windows

  Win7 Pro 64-bit

  VMWare 8.1.1 (3771013)

  I tried re('repair') VMware Tools installation, but do not uninstall first. Just did the full cycle of uninstall/install and it is always difficult pop-up Windows (no BSD, just freezes and VWware with it). Process of the merger of VMware and vmware-vmx to hang (as shown in activity monitor).

  This is * only * happening if I share my desktop Mac computer. If I share any file, it works fine. Yet once, it only started recently.

  UPDATE

  Playing a hunch, I removed an alias (which points to a file on a network drive) in my office that I created recently (I had other aliases on my desk for several months, but none of them did for the network drives), and it now seems to work very well. What's weird is that I initially put crime aliases in a subfolder Desktop and VMware has worked well until I drove my cursor arrow on the subfolder (do not click to open it), when it crashed again. I put the back on my desktop and the "boom" alias, crashed almost immediately, which seems to confirm that the alias is the problem.

  Windows does make a kind of prediction "read-ahead" as you move your cursor and hovering over the records?

  In any case, the trigger seems to be an alias that points to a network drive, that hard to block Windows / VMware.

  Bug?

  are

• How to change the destination folder on a computer for an Officejet Pro 8500 network scans.

  The manual says to launch the HP Device Manager. There is no such program in the Application directory.  The closest thing is a utility that is more easily accessible through system preferences.  But there is nothing in the utility for adjusting the settings of the scanner!  I even restarted the installer where I put the destination initially, but it never shows the screens for this now?  Is there something other in fact named device manager HP OSX that will override the setting of the destination folder for the scans initiated from the printer?

  Hi DMaclay,

  you use the digital archiving functionality to scan directly into a folder? You can in this case, just open the built-in webserver (EWS) for your device and set the Profiler where create a new one with another folder.

  The integrated Web server, you can easily access by entering the IP address of the Officejet in your browser (e.g. Safari). Then go to digital archiving and choose Scan to network folder. Here, you can modify existing profiles or add a new one.

  If it is not the function you use, please provide the number of the exact product for your device and that Mac OS version you are using.

• Kill the "My Documents" folder in Windows Explorer for XP

  Whenever I have called Windows Explorer in my copy of XP and then click on 'Files', the 'My Documents' folder is displayed.
  Except that I do not use it and don't want it.
  I tried in vain to get rid of him, but when I right click on it and press DELETE, it tells me that the content will not be deleted, only the icon, which would be nice.  But it's that - the icon remains.

  You can't delete My Documents. This is a directory on the system. If you want Explorer to open up My Documents, you can change the shortcut to Explorer as follows:

  Go to programs > Accessories - right click on the Windows Explorer icon, select properties and type or copy / paste the following text in the target box:

  % systemroot%\EXPLORER. EXE/e, c:

  This will open the Explorer to C:\. You can also create a desktop for Windows Explorer with the same command icon. MS - MVP - Elephant Boy computers - don't panic!

• Launch of non-functional quick toolbar. Folder of application data for this profile accidentally moved to the Cookies folder, cannot move to the right place and make quickstart functional again.

  Toolbar start fast is the only app that has problems.  I can't start him because I have no permissions.  As this occurred, the Application Data folder somehow finished in the Cookies folder for this account.  It cannot be carried over to the location appropriate without disabling the Quick Launch toolbar.

  Hi lcynicl,

  See if the paths to the shell in the registry file is correct. If this isn't the case, you may need to restore those which is incorrect. Use the table here:

  Reset the default Shell folders paths:
  http://WindowsXP.MVPs.org/usershellfolders.htm
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• How to move a folder Favorites of MSN for Internet Explorer

  I need to move all my MSN FOLDERS FAVORITES to INTERNET EXPLORER.  It is easy to move a single Web site, but I can't figure out how to move an entire folder.  Thanks for any help.

  Hello

  It would be best to contact MSN support for help about MSN. We have a dedicated team to help you with such questions.

  How to contact MSN customer service: http://support.microsoft.com/kb/940784

  Hope the information is useful.

• Destination folder from scanning change for HP PS 7520 with a Mac Mini?

  How can I change the destination for scanned documents folder? I have a HP PS 7520 wireless connected to my Mac Mini computer.

  -Joe

  Thanks for your help. I consider the problem solved. Maybe HP will include this flexibility in a future update to the scan software.

  -Joe

• Is remember each folder view settings feature for a party?

  Everyone remember of this Windows XP. You goto my computer/Tools/Folder Options.../View and there was formerly a check the box for "remember each folder view settings.

  It will be built into Windows 7, any time soon?

  The main reason why I love him is that I want my file music to open always as simply as possible, with a simple list of bands so it ends up being a really thin long window... It works pretty well. Windows 7 has completely lost the ability to do. I really want to have to use a 3rd party application... Please tell me it's be worked on... anyone?

  Hello

  I've been looking for a solution for about 2 weeks and nothing has worked until now!

  Last night, I think that I have found a workaround.  If you would like your records to maintain its display settings, then you records SHALL NOT USE THE LIBRARY to see!  the reason for this is because libraries allow you to access and mix and match the elements of one or more files quickly without moving them from their original location. Libraries themselves don't store your files or folders. Instead, they point to different locations on a hard drive or an external hard drive connected to your computer.

  So, now that we have now that we can try to work around this problem I did and works very well for me.

  1. go to start - and click on your user name which is completely on the right corner.
  2. go in Tools - folder options - General tab must be low and click on 'show all files '.
  3. now you will see your "Username" folder appear under "library".   If you expand this (user name) folder, you will see your documents folders and folders of photos, music etc folders.
  4. open any folder you want, and customizes the view as desired. You can make this record at all! and it will keep its display settings.

  It's worked for me!   I DO NOT USE RECORDS UNDER LIBRARY BECAUSE THEY WILL NOT KEEP THE SETTINGS OUT THERE! SO I SIMPLY CLOSE THE LIBRARY AND KEEP ONLY EXPANDED MY USERNAME AND ALL THE FILES IT CONTAINS.

  I HOPE THIS HELPS... PLEASE LET ME KNOW IF IT WORKED AND IF YOU HAVE ANY OTHER BEST WAY TO HELP.

• Why my saved documents appear in a library, as well as in the folder I created specifically for this document?

  In all series of Windows 2000 and Vista I could make a folder, click and drag a document I had saved in my documents, in this specific case.  In Windows 7, you have the libraries.  In the library named My Documents, I save a document and then make a folder to place this document in.  When I drag the document saved in the folder, it's now in both places.  I want the document to be only in the folder and not in My Documents.  It makes it more confusing and harder to find what I saved.  I'm very organized and when I find something I want in one place only.  I tried following the steps of your help in Windows 7 and what I had lost, and it took me hours to find and retrieve.  I do a lot of genealogy and save these images like the pages of the book, death certificates, Census pages, etc.  I have folders for each of the categories I have to put my data found in.

  I want just the data that I saved in the library named My Documents in one place, a specific folder, I created.  Not displayed in the library, as well as in the record, that's two places the same item of data is then saved.  Where all my files appear in the library named My Documents and I can open the file and find my data easily. If I delete the data in one place it automatically deletes it where ever else the same data is stored. This double economy takes up space on my drive hard but, making it harder to find what I saved.  It's very frustrating.  What happened to just drag file and data automatically moves to the location that you specify and remote where you drugs.  I don't like this feature in Windows 7.  It is too complicated and causes a lot of confusion.  I'm not a computer teckie and dislikes change my system.   How can I fix it?

  It's what you did in Windows 7, and what I end up with.

  Library

  My Documents (why do two places named My Documents?)

  My Documets (my first data here) (what drugs and has dropped to a specific folder, it should go away from here and only appear in the folder)

  The folder I created. (data from drug and dropped in the file, the copy of the saved data stays in My Documents, the two places, why?)

  No duplicates are created, you are simply watching the same file from two different angles.  I know this response is long, but it will explain...

  The libraries are not different records or specific sites.  They are in fact just combined views.  Put literally, they work like this: when you open your document library, it performs a search of two locations: your documentsand records of public documents , then you show every file or folder, it finds in these locations.  The point is to give you a point of view combined all documents which you interest, wherever they are.  If you have documents on a network drive or an external hard drive, you could say the library to get those Word files and include them in the combined view.

  When you save something in a library, the library puts it right in the default location (in this case, the default value would be something like C:\Users\John\Documents) and it starts to appear in the result of the research of the library.  If you delete something, you remove the original: we never two copies, or whatever it is, the library is just there to combine several locations to make it easier to see everything at once.

  You think that you have no use for it - and you could very well be right.  If this is the case, just use it normally and don't bother not including additional folders in the library.  That is to say, just pretend that your document library is your Documents folder.

  I, on the other hand, use it like this: I have a lot of movies, TV series, video clips and other video content.  So he took several hard drives.  I said to my video library to show all these places so that I can browse all my movies from a library, rather than to try to remember which drive a particular show was performed.

• A question about synchronized waiting (block mode) for CPI in BB

  Hello

  I have such a scenario.

  Process a need to send a message to process B, in the send method, we need to wait until it receives the

  notification of process B that B has processed the message.

  All I know is that using ApplicationManager PostGlobalEvent() can send a message to B. But it is non-blocking mode.

  For example, after PostGlobalEent(), A must wait an appropriate event. There may be an another globalevent in A listener to listen on

  the notification.

  Thus in A, we will wait indefinitely until the listener has defined a status which a no need to wait any longer.

  I think that Infinity waiting consumes too much battery of BB.

  Is there a better method to avoid this problem constantly wait?

  In Windows Mobile, waitForSingleObject can easily deal with such a scenario. (blocking for the notification mode)

  I don't know if there is a similar way in BB.

  Any help?

  Sorry, I misread your original message and began to talk about the broader and more complicated case.

  You seem to want to send a message and it will hang until it is processed. You can do this as follows. You basically need a flag that can be set and queried in a thread-safe way, and it should also be possible to block until the indicator is defined without having an impact on the battery. The solution is simple. You need a flag (for example, a Boolean variable) and a monitor object. For example, you can put a Boolean field in the class of your message and use the message as a monitor instance. The beneficiary will be the message, treat it, acquire the monitor, set the flag and call notifyAll() on the monitor. The sender can thus post, acquire the monitor and loop until the flag is set, while citing wait() on the screen after each failure audit. This will have the effect of blocking the sender if the message has not yet been processed and that, until the message is processed. Waiting for a monitor is very cheap in what concerns the use of the battery, so don't worry about this.

  You can extend the simultaneous construction above to have a flag + result/exception and you get something similar to java.util.concurrent.Future of J2SE, I was talking about in my previous posts.

  P.S. If the processing of the message does not have a lot of time, I suggest that you consider the much simpler solution of using Application.invokeAndWait.