find and fix registry errors

Similar Questions

• Microsoft has a software that cleans, repairs and fix registry errors for free?

  Clean and fix free registry errors

  Microsoft has a software that cleans, repairs and fix registry errors for free

  On Tuesday, January 18, 2011 20:38:14 + 0000, Tinaya says:

  Microsoft has a software that cleans, repairs and fix registry errors for free

  N ° and stay away from all these programs.

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.
  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.
  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

  Ken Blake (MS-MVP)

• How do I detect and fix registry errors?

  How can I find out, detect errors and repair the registry?

  Hello

  You can solve the problems caused by an error by using different methods. Most of the errors are not just the registry
  errors. Do not buy into the use of cleaners registry or system optimizers who are too hype and wil difficulty little
  causing a lot of problems. Look at programs such as snake oil.

  If you have a system error come here and in detail the issue and we can usually help you solve. Specific
  Errors may require a particular corrective measure. Here are a lot of General methods to help you determine
  or correct problems. In the next message will be a complete enough for general performance troubelshooter
  help if needed (of course, it includes many below).

  ------------------------------------------------------------------------------------

  Some general methods to correct a lot of problems in the system include:

  System restore - use so you can go back to before a problem occurred - with the exception of malicious software which most often
  It must be removed before using the system restore, which could help to spread the infection.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------

  To correct the many problems caused by the start-up of programmes, services and drivers.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx-

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  --------------

  A repair Installation allows to keep the programs and data, even if redundant backups are
  always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------

  Other useful methods include the Startup Repair (the best of the repair disk or a Windows Setup.

  Startup Repair often works from a Windows 7 repair disc or a disc of Windows 7 Installation
  When he does not value or a recovery disc. If so how do a Windows 7
  ERD is lower. An ERD can be done on any computer with a CD burner running
  XP, Vista or Windows 7 because it uses no files from the host computer.

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk is not - use OPTION 2 to
  make the disc.
  
  How to create a Windows 7 system repair disc - use OPTION 2 to
  make the disc.
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Registry errors. System hangs. How to fix registry errors?

  How to fix registry errors? The registry errors affect the performance of the pc?
  My windows crashes often. Bases of installed microsoft security update.

  Hello

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes, and displays the information about all crashes in one table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  This utility can be used to check the event log for errors other than a BSOD, many crash
  Events will write to the event log.

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second
  or so from the time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that appears
  details of all application crashes occurred in your system. The information breaks down
  is extracted from the .wer files created by the component of Windows Error Reporting (WER)
  the operating system every time that an accident occurred. AppCrashView also allows for the
  easily check the list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ==================================================================

  These methods can help correct most of the problems of crash.

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• ActiveX and COM-registry error details

  ActiveX and COM-registry error details

  32 bit - Backupshell 1.0 Type Library
  The 1.0\HELPDIR for this typelibrary subkey contains no data.

  64 bit - Backupshell 1.0 Type Library
  The 1.0\HELPDIR for this typelibrary subkey contains no data.

  32-bit - IBackupLocationsShellFolderImpl
  This interface points to the type library missing {00020424-0000-0000-C000-000000000046}.

  34 bit - SymDgnHC
  This object points to the type mising {ABEB124A-7647-4B25-BF95-E06F00245769} klibrary.

  Our Modem dies on us and we waited for another expedition, we tried to play old games from our old computer that had windows 98. We have now XP and a new computer. But the games would not play because they seemed not compatiable with this new system. Ever since then with the new modem, which is the same as the last who dies, the computer runs VERY slowly and is worse than dial-up, we have DSL. I have Norton 360 and Regisrty Revivier. They seem to help, but after a few minutes to an hour, the system slowes horribly. Please help me! I deleted this remotley near the old games too.

  Get rid of the registry reviver (make sure that registry cleaner you are using, some may make things worse) and Norton. What you wanted first of all, have you not uninstall? Do not remove the folder. You will have more probs

• Dell Dock exe "application not found" error after cleaning malware virus and fix registry problems

  Hey guys!, I had a problem with malware. (In particular this Vista Internet Security * who seems to knock everyone). I fixed this problem as well as the issue with the thing of my Microsoft Security (which sets the windows Defender) and then I went through and fixed my registry problems who came later as some aftereffect of the virus. (Phew!) Now that it is finally all done I click on my dock dell to go to internet explore and BAM! "Application not found" in an area which the header indicates dell dock.exe. Now I just got through my fixing registry problems so that I have all my .exe programs can open without a problem. All other issues are resolved except this! What's wrong?! Please, someone help. (I can get Internet explore any other way, but it's not my PC and I don't want the owner to think I broke it) PS Can't do system restore I would lose my updates which are very necessary can't do a registry fix because I already did and I don't want to mess with it again is not sure if reinstall dell dock should solve the problem I just install IE9 and all my other icons in dell dock work very well

  Hello

  the Dell Dock is nothing to do with the Vista software; It is software installed by Dell

  If the information below correct it, re-download the Dell Dock or contact Dell

  http://www.DellDock.com/

  Dell support

  http://support.Dell.com/

  or ask in the Forums of Dell Support

  http://en.community.Dell.com/support-forums/default.aspx

  Make sure that all of the malware is gone

  This name of Malware VISTA INTERNET SECURITY 2011, etc. is but one of many that will this 'family' of malware under

  Windows XP rogue name	Name of Rogue Windows Vista	Windows 7 Rogue name
  XP Antispyware	Vista Antispyware	Win 7 Antispyware
  XP Antispyware 2011	Vista Antispyware 2011	Win 7 Antispyware 2011
  XP security	Vista security	Win 7 Security
  XP security 2011	Vista Security 2011	Win 7 Security 2011
  XP Internet Security	Vista Internet Security	Win 7 Internet Security
  XP Internet Security 2011	Vista Internet Security 2011	Win 7 Internet Security 2011
  XP Antimalware	Vista Antimalware	Win 7 Antimalware
  XP Antimalware 2011	Vista Antimalware 2011	Win 7 Antimalware 2011
  Keep XP	Vista guard	Custody of Win 7

  Follow the exact deletion on the link below

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Get performance and slow registry errors in Windows XP

  The artist slow system, application crashes, etc.

  * Original title - any information you can give me about the Windows XP registry errors? *

  Hello

  1. what questions do you have with the registry?
  2. meet you experience slow performance, the application crashes with Internet Explorer or use all the applications installed on Windows XP?
   
  Follow the steps mentioned below and check if that helps:

  Step 1: Check in SafeMode with network.
  Follow the link below to find out how to start your computer in safe mode with network.
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. click Start, click Run, type msconfig.exe Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click restart.

• How to fix registry errors

  Hello

  After having solved my problem KSOD, I ran a scanner who said that I had a lot (400 odd) errors in my registry. The scanner would solve only 15 well (I found it free online)

  Is it possible that I can delete these registry errors or is there another scanner that will do for me?

  The online registry Scanners that you 'will find' are a complete waste of time and especially the SCAMS.

  Let alone registry cleaners.

  You should only work in your registry manually; and then ONLY if you know what you're doing.

  A modern operating system like Vista does not normally require all work to do inside during normal operations.

  See you soon.

  .

  Mick Murphy - Microsoft partner

• Computer store installed XP pro, but does not give me an installation cd and now I need to fix registry errors

  My system started to plant without notice or blue screens. I installed "crashed" and I get the following

  Friday, December 2, 2011 1:51:22 CEST your computer crashed
  crash dump file: C:\WINDOWS\Minidump\Mini120211-02.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A59A)
  Bug check code: 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF8055159A, 0xFFFFFFFFA990B974, 0x0)
  Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
  file path: C:\WINDOWS\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Friday, December 2, 2011 14:46:56 this computer crashed
  crash dump file: C:\WINDOWS\Minidump\Mini120211-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x5A5C)
  Bug check code: 0x1000008E (0xFFFFFFFF804DCA5C, 0xFFFFFFFFA8EC3C30, 0xFFFFFFFF80000004, 0x0)
  Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
  file path: C:\WINDOWS\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Since the shop which has improved my system is in Florida and also is no longer in business, I have no way to get a disc. What can I do to fix this?

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Please provide additional information on your system:

  Learned what was this upgrade and what that they upgrade/do to the system?

  What is your system brand and model?
  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)
  The afflicted system has a CD/DVD drive work?
  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
  Do you see that you think not you should see and when you see it?
  What do not you think that you should see?
  Your system seems to start OK and then crash or didn't he start not at all?
  If your system works fine, what do you think might have changed since the last time it worked correctly?
  Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here (WhoCrashed is OK, but I have instructions for ASB).
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.

  Sometimes BlueScreenView will involve XP files as being the cause of the accident (ntoskrl.exe, win32k.sys, hal.dll etc.) but they are probably not the real cause of the accident (BSV is doing the best he can).  You will need to either pick up some example crashes over and look through them, or find somewhere the XP files are not the 'cause' or you can upload your files to your SkyDrive crash dump and someone with the windows debugging tools can help take a look at them more closely.

  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.

  Open BSOD.txt with a text editor Notepad, WordPad, etc.), select all (Ctrl-A), copy all the text in the Windows Clipboard (Ctrl-C) and paste the text to the Clipboard (Ctrl-V) back here in your next reply.

  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

  ==================================================
  Dump file: Mini102911 - 02.dmp
  Crash time: 2011-10-29 04:54:36
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 22f43
  Stack address 1: i8042prt.sys + 27fb
  Stack address 2: i8042prt.sys + 2033
  Battery 3 address: ntoskrnl.exe + 6e715
  Computer name:
  Full path: C:\WINDOWS\Minidump\Mini102911-02.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 2600
  Size of the dump file: 94 208
  ==================================================

  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).

  If you want to load your crash dumps on your SkyDrive, you must also read this:

  Once you get your downloaded files and watch them on your SkyDrive, you need to 'share' your folders/files so that others can see them.

  Here is a link that tells you how to:
  http://explore.live.com/Windows-Live-SkyDrive-change-access-permissions-FAQ

  Then click on the button "insert a link".  When you click on that, a window opens that contains the link to your SkyDrive files.

  Copy the contents of the box "copy this link to share:" in selecting the content of the link (it will be all highlighted), press Ctrl + C (copy) and then come back to the forum and in your next message, press Ctrl + V to paste the contents of the link back here.

  What you paste the return will look something like this link on my SkyDrive:

  https://SkyDrive.live.com/redir.aspx?CID=6a7e789cab1d6f39&RESID=6A7E789CAB1D6F39! 311

  While you wait, please follow these steps:
  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

• Finding and fixing of the sequences that are out of sync

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production version

  Hello

  Recently, our development database has been updated with production data, but have not been copied from the sequence.

  Then of course the sequence numbers are very badly synchronized with the primary key for tables throwing errors in primary key.

  How can I find the sequence names, names of tables, columns in primary key, and max values for the primary key columns that have values of key primary school max who are higher than the nextval of their corresponding sequences?

  So far the nextval of sequence numbers were all less than the max value for the primary key for the corresponding tables.

  We used the method:

  SELECT max (primary key column)

  TABLE;

  SELECT sequence_name.nextval FROM dual;

  Sequence_name ALTER SEQUENCE increment primary key value - current value of sequence max + 1;

  SELECT sequence_name.nextval FROM dual;

  SEQUENCE Sequence_name CHANGE INCREMENT OF 1;

  But this is done when a record is inserted into a table and the error is thrown.

  So I hope there is a much better way to remedy.

  Please leave me a question.

  Thank you

  Joe

  I don't know if this will help you or not, but here is what I used for the synchronization to the top of my sequences during the last upgrade/server database migration, I was involved with. You must be logged under the scheme that sequences need synchronization, linking of data back to the database, you are basing the sequences on and then let go and recreate sequences. It essentially creates a couple of other scripts and then executes them.

  CREATE DATABASE LINK dblink
  CONNECT to & schema
  IDENTIFIED BY "& password»
  USING ' & dbname';

  set pages 0;
  left head;
  Set feedback off;
  Set trimspool
  fixed line 1000;

  coil gen_seq_grants_spoolfile.sql

  Select 'grants'. privilege: ' on ' | table_name |' to ' | dealer | « ; »
  to user_sequences us,
  USER_TAB_PRIVS PAO
  where us.sequence_name = dtp.table_name;

  spool off;

  coil gen_seq_spoolfile.sql

  Select 'remove the sequence'. o.object_name | ';' | Chr (10) | Chr (10) |
  ' create the sequence ' | o.object_name | Chr (10) |
  "Start by ' | '. (to_number (s.last_number) + s.increment_by) | Chr (10) |
  "maxvalue ' | s.MAX_VALUE | Chr (10) |
  "minvalue ' | s.MIN_VALUE | Chr (10) |
  "nocycle | Chr (10) |
  'cache'. largest (s.cache_size, 20). Chr (10) |
  "all." Chr (10)
  of dba_objects@dblink o,.
  s dba_sequences@dblink,
  USER_SEQUENCES us
  where o.owner = user
  and o.object_name = s.sequence_name
  and o.owner = s.sequence_owner
  and s.sequence_name = us.sequence_name
  and o.object_type = 'SEQUENCE '.
  and us.last_number< s.last_number="" +="">
  order of o.object_name;

  spool off;

  Set of feedback

  @gen_seq_spoolfile.sql
  @gen_seq_grants_spoolfile.sql

  Drop database link dblink;

• Find and fix the missing font WARNING Pages

  How can I find text that is missing the police so I can change it? I selected all the text in the document and changed the font, but the reopening of the document, the error message still appears.

  

  Cambria police is licensed by Microsoft exclusive and is installed by Office for Mac or Windows desktop products. Office for Mac 2016 does not install its fonts in normal OS X system font locations, and a departure from the former office for Mac free, it keeps fonts in Microsoft applications kits, where other applications can not see.

  Unlike MS Word, Pages do not make bold and italic faces when the members of the family of fonts are not installed. Although you can ignore this warning in the view menu Pages, or for the document with the checkbox on the warning sign, it reappears every time you open a different document where the police is/is not installed. There is no configuration pages that disables this warning sign at all times.

  In addition, Pages will attempt to perform font substitution in the document when you see this warning dialog form.

• How can I fix registry error

  Im having problems with the introduction of itunes on the computer.

  nene72,
  Thanks for posting on the Microsoft answers Forum.  If you have found errors in the registry, you can use system restore to restore to a date before the errors started.  Also if you have any problems with iTunes, you can follow this article to Apple support on iTunes and reinstall by removing completely there: http://support.apple.com/kb/HT1925

  This article gives instructions on the system restore process: http://support.microsoft.com/kb/306084

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Software or program to find and fix PC issues

  Please let know us, if Microsoft suggest a software or a program that can be used to diagnose and solve the problem of a PC at home

  Hello

  Unless you we say what the exact problem is that we cannot help you properly.

  Here is a list of Microsoft Fix - Its:

  http://support.Microsoft.com/FixIt/

  _________________________________

  We have advice on how to keep your machine working well:

  See if this helps you improve performance.

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• FIND AND FIX MEDIA PLAYER 11

  I HAVE an ibm OPPORTUNITY WITH SP3 on IT WHEN I DOWNLOADED IE8 AND LIVE ESSENTIALS ECT I ALSO GOT ANOTHER MEDIA PLAYER 11, I UNINSTALLED a VERSION OF 2004 AND recognized AS I HAD KEPT THE 2010 VERSION, BUT BOTH DISAPPEARED, I DOWNLOADED IT AGAIN, HE SAID it IS IN add + DELETE, BUT WITH No. MB Ko next to her , all the patches and the secruity are always add + delete but I can't find media player, can anyone help me with this.

  Check the programs folder: in C:\Program Files\Windows media player should be a file called "wmplayer.exe".

  If the folder and the file above are present, just right click on the file then from the menu choose "create shortcut".

  Now drag the shortcut to the start menu and release somewhere in the list of programs if you have a way to start the program.

  You can also drag the shortcut icon for media player on your desktop or in the quick start to the right of the menu Staer area.

  HTH
  Cheers - Neil

  Neil Smith MVP Digital Media 2004-2010 http://mvp.support.microsoft.com

• I need a free scan and fix to find errors on my computer

  I had several analyses on my computer and the sky is indeed declining according to third parties. Is there a free scan and fix for errors and other problems highlighted by the companies that want the difficulty for a charge I have windows vista Home premium, is there a free way to clean my computer? Thank you, dale e-mail * address email is removed from the privacy *.

  You would be wasting your time and money. What exactly are you trying to accomplish?

  If you really want, you can use the relatively harmless CCleaner:

  http://www.filehippo.com/download_ccleaner/

  My advice is removes nothing that you don't know what it is. It will save you long-term evil.