Folio is displayed on the device even after deletion

Similar Questions

• Media Player recognize my mp3 player but said there is no files on the device, even after the sync successfully

  I have not hooked to my mp3 player up to my netbook in age, but today I wanted to manage my songs I did. Media Player recognized my camera (Sansa c240), but it that there are no files on my device. It scared me because I had listened to just the day before and there was a lot of files on it! I checked the drive itself and the files were all still there. Media Player told to sync files on the device, so I did and it successfully on the device. However, even though the songs were synchronized with the device, Media Player still insists that there is no top file! I checked the player and 3 files synchronize had were there. Help!

  I use Windows 7 Starter on a netbook Samsung. Thanks for all the tips ():

  Hello

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Method 1:

  Updating the Sansa firmware update and check if that helps.

  Sansa Firmware Updater and defined Firmware : http://kb.sandisk.com/app/answers/detail/a_id/156/~/sansa-firmware-updater-and-firmware-defined

  Note : using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  Method 2:

  Sansa player NOT recognized by the computer : http://kb.sandisk.com/app/answers/detail/a_id/42/kw/e100/r_id/101834

  If the problem persists, then it would be best to contact Sansa for additional help.

  Sansa support: http://kb.sandisk.com/

• Host is reflected in the report, even after deletion in Foglight

  Hi all

  We are 5.6.4 Foglight to monitor infra metrics of our environment. We have a "Service level Iterator" report for guests see availability.

  In this way, we get availability for some additional hosts that are not there in the console and which are already deleted from the data management.

  Please guide us to resolve this issue and get rid of unwanted guests.

  Kind regards

  Guenoun

  People,

  I hate to say it but pleaase prosecute with assistance as soon as possible.

  I know there are ways to purge the data / remove obsolete objects

  https://support.quest.com/SolutionDetail.aspx?ID=SOL64596

  http://en.community.Dell.com/TechCenter/virtualization/infrastructure/w/fog-virt-wiki/5732.stale-objects-script

  BUT, whenever we play with the data model and purge the data that I get nervous that the removal of the wrong thing may influence your reports (and data will be gone unless it has been saved).

  Thank you

  Golan

• JPEG and RAW is more displayed on my screen. even after the graphics card update

  JPEG and RAW is more displayed on my screen. even after the graphics card update

  Click on edit and click Preferences, and then choose the last option which is camera raw.

  on the camera raw preferences, in the lower window, uncheck the box use Gpu option and then restart Photoshop and try again

• Why is the number of previous visits so high in the Security tab of the certificate information window when you visit a secure https site (in my case 13.400) even after deleting cookies?

  When you go to www.gmail.com and I right click on the colorful gray "google.com" showed left next to the address bar then it shows you the details of the certification. When you click on 'other info' and then go to the Security section he show you how many times you visited the site before. In my case it say zero, but this is not the case with my friend, his nuber of previous visits said 13,400 even after deleting cookies and history.

  Can someone tell me what this means and if anyone other than himself is perhaps looking at his email because he is a little worried now.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file

• do not proceed with the installation even after restart of firefox add-ons

  Add-ons - do not proceed with the installation even after restarting firefox, I deleted the files of 3 extensions (several times) in the other suggestions and rebooted. Still don't work yet saying will be installed when you restart.

  This has happened

  Each time Firefox opened

  == after update to 3.5 and continued to 3.6.3

  Hey even once, I did a complete uninstall and reinstall Firefox and it fixed the problem for me.

• Outlook Express keeps coming out of the emails in the Outbox even after sending e-mails to friends.

  Outlook Express keeps coming out of the emails in the Outbox even after sending emails to friendsthen continues to send emails over and over again.

  This occurs even after the email was deleated from Outbox. So that the people that I send to obtain email 20 - 30 times instead of only once.

  Can someone help me solve this problem? I have Microsoft XP Professional on my computer.  Thank you.

  A common cause of this is to have your program configured antivirus to analyze the messages, including outgoing mail.  If you can completely uninstall the AV program, and then reinstall it without the analysis feature mail.  If you can't do that, turn off scanning messages.  You will be just as safe.

• Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Hi julesmom,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• How to add the device (eth1) after the command 'neat' calls 'Configure Network'?

  People,
  
  Hello. I want to install 2-node RAC Oracle 11 GR 2 VMPlayer 3 System. The host OS is Windows 7. Oracle Linux 5.6 is the guest operating system. 2 nodes (2 Virtual Machines) are RAC1 and RAC2.
  
  We must create the public IP address and IP private for each virtual computer (RAC! and RAC2). IP addresses public (eth0) connect RAC1 and RAC2 of shared storage. The private IPS (eth1) connect RAC1 and RAC2.
  
  In Oracle Linux 5.6, the command "neat" to the root user calls the configuration of the network (5 tabs) as follows:
  
  Devices | Material | IPsec | DNS | Hosts
  
  In the "Devices" tab, I created the public IP address for RAC1 whose nom_peripherique is etho.
  But I don't know how to add another device 'eth1' in the 'Devices' tab to create the private IP address.
  Thus, the network cannot be implemented.
  
  Can any folk tell me how to add another device (eth1) in the 'Devices' tab after the "neat" command calls "Network Configuration"?

  user8860348 wrote:
  Folk,

  Hello. Thanks much for the reply.

  In the directory "/ etc/sysconfig/network-scripts", there is a file 'ifcfg-eth0"which contain a public IP address.

  But there is no file "ifcfg-eth1" that must be a private IP address.
  What is the reason that there is no device 'eth1' in the 'Devices' tab in the Network Configuration window?
  Do we need to create a file 'ifcfg-eth1 '?
  What should be the content of 'ifcfg-eth1 '?

  Did you create a second NETWORK adapter to the virtual machine?

• makemenu problem: display of the menu, but after selecting an item, menu disappears and pops up again in the Middle after the code is executed

  Hello

  I have a very strange problem on BB9700 running OS5:

  1. application with 2 screens, each with menu (makemenu)

  2. second screen is pushed by the first screen

  3. menu of second screen works as desired

  4. menu of the first display shows the following behaviors:

  Click on BB-let the menu appear in the lower left corner. So far so good.

  After clicking the item(own item-run block is empty) menu, the menu disappears and appears back in the middle of the screen.

  This is my code (even in second screen-but working there):

     protected void makeMenu(Menu menu, int instance) {
          super.makeMenu(menu, instance);
  
          menu.add(new MenuItem("fix menus",10,20){
              public void run(){
              }
          });
  
                  menu.add(new MenuItem("Options",20,10) {
              public void run() {
              }
          });
  
      }
  
      protected boolean onSavePrompt()        {           return true;       }  
  

  In the second screen, the menu works fine, but with the first!

  Any idea?

  Thanks in advance

  Hey Ted_hopp, simon_hain,.

  I found something after commenting on overridden methods (one after another):

  I have replace onFocusNotify. If I comment I out completely, the menu works as it should.

  If I just use the following code:

  protected void onFocusNotify(boolean focus) {
  
  }
  

  with nothing else (not), the menu reappears after a click.

  So I put the forgotten 'Super.onFocusNotify (focus)' call to the first line, and all things are working properly.

  Thank you

• Preview App not displaying not updated content, even after 30 seconds and closing/repoening

  I created and installed a preview app and reading some of the other comments here on this topic. I added .article files to my collection of high level and published. No bubble update appears after closing and opening the app within minutes. Do I need to click on the preview icon in the upper right corner of the Web portal whenever I want to get a preview of the changes on the device? I also tried, with no update was successful. If I delete the app and reinstall, my content to date is then displayed.

  Thank you!

  Jeff

  I had success lately overview my content updated in the application preview. What I did differently, was 'Unpublish' the content I was updating to be read in the preview application until I click the button Preview in the user interface.

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• The sidebar will not clear history, even after deletion of history, how to erase the sidebar history?

  Even after the erasure of history (FireFox 6.0.2) the sidebar history contains a story of friends.

  After you remove each item individually and say things to forget to each site, they all return.

  Any ideas on how to clear the history sidebar?

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file

• Unable to connect to the router (even after reset)

  I'm really frustrated, and I hope that this community can provide an answer. After all the hype around this router, it is he who gave me the most trouble.

  About a month and a half... completely randomly it seems to me, I could not connect to the router more. Not through intellectual property, routerlogin.net/com...nothing. It just says: cannot display the page. I did everything I could possibly think, tried all of the suggestions I could find here and elsewhere and still nothing would work.

  I finally did a hard reset and obviously lost all my settings... and RIGHT AFTER the hard reset after upgrading the firmware, I can't connect to the router again. This could be the cause? Is there a way around it?

  The router worked fine until about a month and half ago. Then I stopped being able to connect to the admin page. Several resets hard did nothing.

  I ended up RMA'ing it and the new replacement works fine (for now).

• The10.3 Simulator displays icons on the toolbar Action exactly as they are displayed on the device itself

  I found that when I build less than 10.3 and run Simulator 3.0 or 3.1 that display icons in the action bar when VisualStyle is 'brilliant' in black on a grey and not black background on white. This is true if the icon is black on white or white on a black background in a first time, and it is the same for all screen sizes.

  I've attached an example.

  This is how the icons are actuualy on the device or will they be black on white.

  Mark, I just tested my change on all the bright and dark features.

  I was looking through my list of icons and I arrived just to pull the top one on the right... the solution was obvious!

  It is in this context of the specific icons that I had placed on the action bar, which was the question. Icons were reversed, but it is in this context.

  I found a complement to my graphics editor to remove (silimaire value = 0) the background and they displayed as expected.