Folio quality of police during a State issue and then work with a button.

Similar Questions

• How to save the State temporarily, and then pull it out back?

  We are developing an application on Jdeveloper 11.1.1.6.0 BPM. I have a requirement to save the current state(partially entered) of a web application and temporarily, then recover with the same State when it has connection the next time? How can achieve us?

  Make the changes you want in the form-> click on the drop-down "Actions" (the one on the form) and not one above the task list-> click on "Save" and your changes will be saved.

• XP - issue of modem - works with Westell 327W - now will not work with any other modem

  I use Westell 327W modem.  Verizon contacted on slow speed of ISP.  His person accessible tech my computer remotely and made various changes to the settings.  Did not help with the speed.  They then sent new modem - 7500 Westell.  However, I find now that while the computer always connects OK with the Westell 327W original, I can not connect with any other modem, including a new and several others that I have which was very well connected in the past.  I guess that the person tech made some changes to some settings that I place that affect the ability of the computer to recognize and to connect through a different modem.  The modem starts fine, all lights come on, but when I go to connect, I get a response that the remote modem does not recognize me.  Which parameter is one that handles it.  Thank you. Peggy

  Thanks - I have discovered that while I had an internet connection (that I could see), Verizon was not recognize me.  Problem is that I had to reinstall the software from Verizon for the new modem, which they had not told me I had to do (and did not).  Finally stumbled on it and had it solved, but thanks to the entry.

  By-the-way, he did not a thing to address the problem of low speed; their representative says it is 1.7 mps to the modem, the best that I get so 1.25, and it is habituellement.8 to 1.0.  Probably not your area of expertise

  Once again, thank you.

• Rebinding issues and/or placing with GraphicRiver model

  Hello world.

  I bought this model and have not been able to get ANY image to link or to place them correctly in ANY image. It just seems to capture the center of the image, but in other frameworks, it cuts up or down, etc.

  It is a mess and I lose the days of production on this project. +/-20 e-mail exchanges with the author have not yet found a solution.

  No idea what is the problem? I want to believe I'm missing something, because this model has sold about 250 on graphicriver. I am not real experienced with ID CS4, but have 2 years of experience with the PP and PS AE and have produced a couple ID to PDF documents without problem.

  Thank you, everyone.

  Paul

  If the entire image is moving, you have the selected. In CS4, use the direct selection (white arrow) to select the image itself (cursor should suddenly change hands when you hover over the image), or you can double-click on the image with the selection tool (black arrow) to switch to the direct selection, and then select the image in one step. In CS5/5.5, you can use the selection tool and content Grabber (donut in the middle of the image shape) if it is active, or use the same techniqus of CS4.

• Hello! I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure. What can I do?

  Hello!

  I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure.

  What can I do?

  Save the relevant keys, then search your registry at HKCU\Software\Adobe\Director\12\Script

  If this does not help, save the entire branch and try to delete it

• High resolution quality of the State of stocks, Adobe and work with the previews?

  I used Sutterstock in the past, but being a CC subscriber, I am seriously investigate Adobe Stock.

  Because you don't actually see the image high resolution up to that after purchasing with Adobe Stock I can't say how easily compare its inventory with Sutterstock.

  I downloaded preview AdobeStock_52339199_WM which was, of course, low resolution and it was much smaller in size (preview 1000 x 662 cases real is 4590 x 3040).  Therefore, I really could not do anything with the preview since it's a "postage stamp" even if Larry White was a video how I was suppose to be able to work with the preview in Photoshop and when done, then buy the license.  And once again, in low resolution, I had know idea, with regard to the quality of the finished product, I'd be buying.

  Any help on these questions would be greatly appreciated.

  Hi Ray,

  I understand your concern. However, from now on, you will only be able to download the image in watermark, which is a version low resolution of the image. If you like, you can buy a version the same high resolution.

  Your comments are appreciated.

  ~ David

• I found flaws in all of the calendars and the scientific calculators of Apple products. How can I send you my report pages 20 as a matter of course. Who should I go. This is a real case, and I am willing to work with Apple on this issue.

  Dear Sir/Madam,

  Topic: Default in some Apple products (important issue).

  This is not an unsolicited idea or suggestion (Please read)

  First of all, allow me to introduce myself as a teacher of mathematics, with more than 20 years of experience in the teaching of mathematics in Jordan.

  I take the liberty to write to you on a very delicate issue regarding the above topic. I'll try to be direct and fertilizers to point.

  Eight months ago, I have established contacts with the customer at Apple and succeeded to in explaining my intention to work with Apple on the flaws I found in all the following Apple products:

  -Scientific calculators built into the Apple iPhones and other products like Mack book pro (13 keys/operators applying bad mathematical concepts).

  -Calendars integrated into Apple iPhones and iPads (after a certain date).

  -Most of the calculators downloaded on Apple iPads (application).

  With my main concern during the final user, I already have reports submitted to Apple on the six keys with solid evidence and evidence supported with excerpts from various reliable resources that are no doubt as to the failure of these keys. I also presented copies of the date on which the calendar goes off track.

  Now iPhones for new generation of Apple (6s and 6 s-Plus) have already been launched on the market, keeping the same flaws, I decided to start contacts with Apple once again, hoping to succeed in reaching the right people at Apple to continue my rage in finding that the right to address this issue. I hope that you will respond positively.

  My worries and concern are oriented towards the end user and, in particular, students who take the responses of these calculators for granted when they are wrong and they don't realize.

  I have prepared a 20 page report although detailed on these defects and how to correct function solid evedence of reliable math textbooks. I'm ready to send this report to the person/department concerned, on which they can check and verify my claim with any or all of the following:

  ·       Apple/mathematicians engineers.

  ·       The mathematics books that are published by well known/good reputation

  publishers.

  ·        Calculators Casio or TI as the most reliable calculators in the world.

  ·        Reliable sources of mathematics of the internet.

  ·        Presentations power point math on YouTube.

  .        Math teachers well known working in renowned universities

  ·        American Mathematical Society.

  I reiterate my willingness to cooperate on the question above so that the genetions coming Apple products will be free by all means!

  I look forward to your positive reply,

  Sincerely,

  Nael

  < personal information deleted by host >

  This is a user to user forum.  Your message must be addressed to the Apple company.  Maybe a letter to Cupertino, California, is in order.  Your letter will receive no valid response here about your concerns.

  Ciao.

• chip Z50-70 problem reboot / restart issue and 8 GB ram

  Salvation;
  I have lenovo z50-70 notebook with Intel i7, 8GH RAM and 250 GB of kingston SSD
  The bios of the laptop is v.29
  I installed win 7 PRO 64-bit operating system.
  The system has worked well for about 2 weeks. After this time I noticed the strange question - the laptop is unable to boot from the disk hard when restarting/rebooting the system is used. It breaks down screen goes black and then the cell phone tries to do something (Lenovo logo at all), goes down and repeat for infinity.
  When the pxe boot is enabled the system constantly trying to boot from pxe. anoint and once again.
  I can only close the laptop to the power button and restart. It seems that the system does not recognize the hard drive during the reboot process.
  When I stopped the system (down) and leaves - everything works fine and the system starts normally without any problems.
  I also noticed one other issue - the laptop does not recognize the 8 GB of ram chip. (kingston 8GB PC3 - 12800 CL11 204 pins SODIM). It is little matter if I use this RAM, alone or with other RAM - laptop chips recognize only 4 GB or 2 x 4 GB. I tested the RAM 8GH in other laptop (dell and benq) and it works fine, only Suur z50-70 a problem with it.
  I don't know if the ram and restart problems are related to each other, but both of them seems to have problems hardware or bios.

  Any help will be appreciated

  Hello
  I solved the problem by upgrading the SSD firmware.
  I used the tool of kingston for upgrade (for ssd SV300S3 series):
  http://www.Kingston.com/us/support/technical/downloads?product=SV300S3&filename=V300_525fw_Win

  The upgrade process takes a few seconds and after that, everything works fine. I've done a few reboots and I can't reproduce the problem.

• performance issues and connectivity at random

  Hi all, I have a new rn204 I have some problems with.

  my current setup is:
  ReadyNAS 204 6.5.1
  3 x red new WD 3 to x-raid 25% free
  1 x 1 GB link to router (asus rtn66u)

  the first issue I see is intermittent from speed in transfer large files. Normal performace is about 110 MB/s, which is to saturate the line but I saw at random speeds fall at 100 kb/s

  2nd edition: ping the IP address of the nas are often 50%, 75%, 100% of loss on 4 pings. most of the time it's good, but sometimes not.
  3rd edition: the nas has been itself reassign to an ip at random in the range 169.254.x.x 192.161.57 about once per day, I configured for a static ip address but conectivity will die (can't ping and the router can not see) every day or almost.

  usually the problems disappear if I pull (good quality cat6) ethernet cable in the back and reconnect it.
  Sometimes this also pushed (or worse) transfer speeds if they are slow.

  pls send help!

  I suggest (my.netgear.com) support for this - you have support telephone installation free for 90 days.

  I think there is a problem with the NETWORK card hardware.

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

• How the download bundle work with Professional Edition folios?

  Hi all

  I tried to get information on specific issues without success.

  This is the scenario:

  We must develop a newsletter for a company by using membership of the company Apple.  First wave will only be iOS devices.  Second wave will include Android devices.  The newsletter will be around 4 issues per year.

  (1) using the montlhy members, folio downloads are combined?  Newsletter1, Newsletter2 will give us 500 downloads for the first year?  And after that, to have bought 10,000 distribute downloads between all folios, that we published?  The number of downloads available is affected on the profile of the user instead of individual applications?

  (2) no folio downloads expire?

  (3) if we do use iTunes to distribute the newsletter, how do we keep track of downloads? This occurs in the application when it is installed?  And this raises the question if we really need that the costs of downloading if we don't use iTunes?

  (4) If you are using the creative cloud (which only works with iOS devices) is going to give us unlimited downloads, right?  This type of folio works with the Apple company membership?

  (5) if we create the first wave by using the creative Cloud service, and later, we get the professional edition, can 'transfer us' information folio from the CC to the new Service?

  I've already called:

  877-792-3623 such as published on the page of the professional edition (they say only can help with Enterpise) and sent to 1800-443-8158 (Volume Licensing) who does not know the answers.

  I'm trying this way because it was kind of frustrating trying to find the answers by phone.

  Please, any help would be great.

  (1) I don't know what you mean by "accumulation". See http://www.adobe.com/products/digital-publishing-suite-pro/buying-guide-pricing.html for included downloads. If you buy every month, you get 250 downloads per month, and only one month of value will take forward. If you purchase the annual version, you get 5 000 downloads, but then again, those who don't ride to your next year of service. Bundles of Folio apply on all publications in your account, not for an individual application.

  (2) those included in your monthly or annual expires at the end of each month or year. A folio bundle purchase expires one year after the date of purchase.

  (3) for the consumption of bundle download calculation that is done by the application itself, not iTunes. The DPS dashboard at http://digitalpublishing.acrobat.com/ will show you the download counts for your publications.

  (4) creative cloud only gives you access to create simple editing applications. It is a complete, stand-alone, application with your content inside. It doesn't have the ability to download additional content in the application and therefore no download fees and no "unlimited" download It's just a unique and autonomous, application in the app store.

  (5) If you start with a simple editing application and then want to switch to an application of several question you will need to re-apply several issue with App Builder and submit it to iTunes as an update of your existing application. Your existing content used to generate the application may easily be re-published (if necessary) so that it appears in the new application of several question. Your readers will see an application update is available, download it and then to have the experience of several question inside the app. If you recharge for newsletters, it will be problematic granting previous buyers of your application fees for simple editing to the same content in the request of several question.

  Neil

• The clicked State remains on until the user clicks again and then return to the normal state

  I'm doing a light switch.

  Don't worry how, but here the click switch and stay in position of eon th until you click New.

  Using the buttons in the muse, the switch moves during the click on but goes back to the normal state

  http://www.cathylbrown.com/testf/

  Is it all similarly to this light switchwork.

  Ciao

  Cathy

  Good late night puzzle.

  I would reach this using a slide show.

  Put the two images in the slide show, and then have just a next button with an opaque fill 1%, which was set to be over the switch. When the user clicks, the slide show will move to next slide (which will be State of the switch). I probably also decrease in the duration of the default transition for the melted transition so it's faster than the default value of 3 seconds.

• Sync during compression HD FLV and F4V in Premiere Pro CS4

  Hello.  I am trying to create messages of public interest for You Tube initially created with a small device that produces Quicktime HD files.  For YouTube they do not have to be perfect, but that's what I'm working with.  My computer has only 4 GB of ram so I can't watch the video to test synchronization because it gives just a slide show when editing.  He never does anything, but a slide show with HD video.

  When I watch the original unedited Quicktime file synchronization was distant.  When I visited the original file in FLV and F4V formats, just to test the synchronization it is PERFECT.  Then I edited the first video from this session and FLV used and the timing was PERFECT.  So I do the second video synchronization, tested on the original film and its PERFECT.

  So I thought it was okay to continue.  Everything was perfect after that first made the raw images. The first video worked, right? Synchronization of the raw images of the second video has been fixed, right?

  Now that I spent all the time to edit the 2nd video, sync is TERRIBLE.  I have no idea why.  F4V was worse than FLV, but none are ideal for 2 video.  So I guess I have two questions:

  (1) what format should I use to upload to YouTube which does not give me a unusable timing problem

  (2) is there something I can do to see continuous synchronization in Premiere Pro CS4 without updating my equipment?  I use Vista 64 bit, 4 GB of ram, dual-core intel.  What I have to do a significant hardware upgrade just to get HD video do not make a slideshow during first execution?

  Thank you!

  AVI file to the private mssg link... 1 gigabyte, takes about 30 min to DL - look and tell me if synchronization is better or worse you know... or the same thing... without you looking at this file and checking against your own there would be no way of KNOWING what (compared to what you met).

  IF THE AVI IS BETTER... What are the steps

  project settings and description of the measures shown below...

  CineForm (neoscene) can handle that sort of thing of conversion, but I do not have this program... most of this will be explicit from the images...

  

  

  

  Here's the info from mediainfo avi export

  

  below is the description of steps

  -------------

  easyShare measures taken

  his program (I used soundforge) allows re - sample 16 kHz sound for wav file (wav pcm) to 48 kHz and 32 bit floating point.

  record in stereo or mono (stereo may turn into 2 mono channels when they are imported in preview)

  Import original mov file to the new project, untie her, remove its import wav and put on wav chronology... link to the video.  I increased the volume on an audio file with conversion just for my own satisfaction... you can do what you want the audio file also (re: filters etc)

  The file size will be HUGE... as you're now away from the advanced mpeg 4 HIGHLY compressed format of your original footage...

  However, it is OK to HAVE BYTES COUNT FILE AT THIS POINT HUGE...

  You can then IMPORT the AVI file that you exported in first for your mounting--(je commencerais nouveau projet pour cela) with very little "loss" of original quality - most of the humans would be able to tell any difference between the quality of the original and this AVI file... (I can't).

  After you change the avi file or files to export as flash or anything else you want...

  ---------------------

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Adobe won't work. I try to print bank statement. Does not work?

  Have updated Adobe Reader. Have set it as default. Every time I have try and print a bank statement from the Bank's site, it does not load in adobe. What I am doing wrong? Loaded in a different browser and it works very well.

  Hello

  In order to change the default reader for PDF files (to not to open PDF files with the internal PDF reader to Firefox), do the following:

  1. Click the menu button

     

     then click on Options (preferences for Linux and Mac).

  2. In the Options (preferences for Linux and Mac) window, select the Applications Panel.
  3. In the Search box, type PDF. You should find Portable Document Format (PDF).
  4. On the right side, you will find a column of Action . To select your favorite PDF reader. In order to view PDFs in Firefox, choose Preview in Firefox.

  This solve your problems? Please report to us!

  Thank you.