follow-up Clone Stamp tool

Hey... !

How to monitor a clip and get the Clone Stamp tool to follow this path? Even if the object that I followed is in a different place that the spot I am trying to cover?

I'm looking for an expression og kind get the position of the tool clone to follow a Null value or anything of the sort... ?

Thank you

/ By

P1070428.00_00_02_19.Still001.jpg

Expressions of this sort of thing are very difficult and nearly impossible if there is a lot of movement and the prospect of change in the shot. Here's why. Let's say that your photo was taken with the camera very close to the clock, panoramic left right at the center of the clock. With the camera very close to the subject as the unit's clock begins to come as part of the distance between the left and the right of the base is much shorter this is when the clock is centered in the frame. This means that you must follow the scale and position and make adjustments to your position of clone based on the change of the scale as well as the change in position. If you throw in the angle changes horizon that you would get if the camera was tilted to the left but also left exhausted but sat up (or so held in the hand and the horizon didn't really level) then you would also follow and make adjustments for the rotation. Now you start to get into trigonometry. Finally, you encounter problems that arise with the distance and angle of the original sample. because there are no controls to change the location of the source. If your source is 100 pixels to the left and 50 pixels above the position of clone, it will always be 100 pixels to the left and 50 pixels above the sampling point. If the perspective and scale change then your source of change and the clone image will change.

Now that you understand the problem, I'll show you how to use an expression to shift the position of a point of the track. I guess there is no rotation in the shot.

This is how to address the problem. You will need to collect data from the position of Tracker (t), the change of scale (ts), the position of the clone (ip), the discrepancy between the position of clone and the tracker on the first image (ofst), then you will need to calculate the change in offset or adjusted offset (aofst), as the scale (ts) changes by multiplying the offset (ofst) of the scale (ts) then you will need to calculate the new position by adding the offset adjusted to the position of the track. This is the expression and it assumes that you have applied data to a null value, you named "Tracker":

t = thisComp.layer("Tracker").transform.position;

TS = thisComp.layer("Tracker").transform.scale/100;

IP = t.valueAtTime (0);

OFST = (value - ip);

aofst = [ofst [0] * ts [0], ofst [1] * ts [1]];

NP = t + aofst;

Rail weighbridge for line 2, is divided by 100 to convert a decimal to percentage so the multiplication in line 5 will give the right result.

Line 3 uses the value according to the time to retrieve the position of the tracker at the beginning of the model.

Line 4 calculates the offset by subtracting the value of the property, the position of the initial position of the tracker clone.

Line 5 to set the offset by multiplying the percentage offset. You have made this calculation in a table because the scale and position are the two tables.

Line 6 simply adds the offset adjusted to position Tracker.

If there is rotation to throw into the mix, you can use trigonometry to calculate x and y offset based on the angle between the position of Tracker and the clone. That would be pointless because the position of the offset of the source to the clone would not change. In my example, it would always be 100 pixels to the left and 50 pixels above the position of the clone.

A better solution to a shot of movement would be to use the Motion Tracker to stabilize the shooting in removing movement rotation and scaling, applying this stabilization for shooting, the shooting of duplication and to appoint the Clone duplicate, then using the original film stabilized as source, make the repairs with the cloning tool, then set the clone to paint on transparent and slide in your main computer and remove the stabilization using a null value and a couple of expressions and a double of your film stabilized.

Tags: After Effects

Similar Questions

  • When you use the Clone Stamp tool CS6 the alt key does not work?

    Just recently, my mouse have misbehaved and touched my CS6 when I was working on a photo. The result, my alt key does not work. For example, when I use the Clone Stamp tool, I can't sample as the alt key does not work. Even in ACR, the alt key does not work. When I drag the 'white' to the left while pressing the ALT key, the screen turns black.

    Help, please? Thank you

    Steven Teo

    Hi Steven Teo,

    You are able to use the ALT key well otherwise on your computer?

    You can try to reset the Clone Stamp tool.

    To reset, follow the instructions below:

    1. Select the Clone Stamp tool

    2. right click / Control click dropdown at the top left

    3. choose Reset tool

    Hope that helps.

    Kind regards

    Assani

  • I have a problem with the Clone Stamp tool?

    The Clone Stamp tool doesn't work really well it does not tell the source select and the pad want not applied the correction?

    You have two active subscriptions.

    1, adobe Stock.

    2. the plan of creative of cloud photography

    Please let us know the question you face with which order a screenshot will be more useful.

    Concerning

    Stéphane

  • White layer no longer allows the use of Spot Healing brush and Clone Stamp Tools

    I do a lot of photo restoration. Before the last update, I used to add a blank layer and adjust the photo with the Spot Healing brush or Clone Stamp Tools.

    This no longer works.

    Solved

  • The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

    The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

    What version of photoshop are you?

    The red eye tool should be in the same location as the healing brush and Patch tools.

  • Clone Stamp tool works is not on the new layer

    I created a new layer and tried the on this new layer Clone Stamp tool to us, but it won't work. It will work on the background layer, but not the new layer, that I created. Please help, it drives me crazy. I use the last photoshop.

    Looks like you beat me, Chuck!

    Mine works fine on current and below.

    Try a reset of the tool:

    If this fails, try a reset preference:

    Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

    Mac: Hold down Cmd + Opt + shift and run Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

    Benjamin

  • Question about settings in Elements 9 Clone Stamp tool

    I am a fairly simplistic user of 9 items on a HP Pavilion dv7 with Windows 9.

    I want to be able to copy small parts of pictures on other parts of the same photos.  I used to be able to do that very well.

    Then, somehow, the box labeled 'Modes' has changed from the default setting.  I need default setting.

    I tried the positions of Modes, but none seem to be the one to copy from one place to the other.

    Any ideas on the reset to the default values for this?

    Thanks for any help on this.

    Larry

    See if the reset of the work of the Clone Stamp tool.

    Click on the small arrow turned downwards as shown below and then click on the reset tool

  • In Photoshop's Clone Stamp tool applies the theory of matrices in its functions?

    IM currently doing a math project that has various applications of the theory of matrices and Im just curious to know if the Clone Stamp tool uses this concept to replicate pixles

    So you're saying "should I use math matrix? -Since there is nothing called "theory of matrices" I know...

    The clone copy stamp data of pixels from one place to another, or even between the images.

    You might consider images for matrices (width * height * channels), but we don't usually operations mathematics matrix on them.

    The clone stamp can rotate or flip the image data source - which uses the matrix mathematics to calculate the rotation or reverse.

    But you'll find more math matrix in something as filter-> other-> custom, which is pretty simple convolution/correlation function using matrices (correlation/convolving one matrix with one another).

    And there are many places where the matrices are used for solutions of the method of least squares (such as MergeToHDR).

    Mathematical matrix can be used when color conversions, especially between the RGB color spaces.

  • Hi, I'm working on CC photoshop classroom in a book, and I find I can't use Clone Stamp tool, why?

    Hi, I'm working on CC photoshop classroom in a book, and I find I can't use Clone Stamp tool, why?

    For example, if you want to clone the boy on your photo, you would have 1) Option + click on part of the stone wall first and then 2) use your tool clone directly on the boy.

  • Help with using the Clone Stamp tool.  How do a get a better game?

    Hello

    Please see my sample image:

    Clone Stamp tool remove wood.jpg

    As shown in the picture, I want to remove the wood in the corner.  I thought using the Clone Stamp tool would give me the look of the corner by sampling above the wood and then clone on the wood.  But what I got is a lighter angle of research, not what I want.  I tried some blending mode, but I don't get the game I want, so I thought I would ask here.  Is there a better way to do it?  I have this same problem with other image like this.  I take a point of sampling part of the image and then the Clone Stamp ends by lighter or a different shade in the buffer zone.  Yet once, maybe the clone stamp tool is not the right tool to do this, if so, what else is there?  The Healing Brush tool is worse for what I do in the type of healing.

    Thank you

    The Clone tool may not be the best choice when large areas are involved. It is easier and faster to make a selection of an area of choice and then using Edit > transform > deformation to replicate and extend the area selected, as shown here

  • CLONE STAMP TOOL

    My Clone Stamp tool has suddenly stop working. No one knows how to fix?

    Ok. I'm a fool. I watched the brush toolbar and I had set it to color instead of the normal. Sorry if I have embarrassed anyone. I had not used this tool in a while so I forgot. I hope at least that my help someone else. Thank you very much for your quick response. I imagined all kinds of things.

  • In CS6 Clone Stamp tool will not work with Tiff files

    All of a sudden the Clone Stamp tool does not work when you work on a tif file. Yes, I get the circle with + sign when I press the ALT key, but tool not clones.

    Hi Trevor!

    I discovered that it affects all file extensions.  Files were created after adjustments in Bridge. Layer is not locked. The opacity is 46. Now that I have reviewed your response, I was watching a FAQ on the same thing. Honestly, I didn't know you can reset tools.

    I found out how to reset the CSTool and voila! Now, works great.

    Thanks for the tips...

    Dan

  • PES 12 Clone Stamp Tool - selection Souce region

    Other than Alt + Left Click combo, are there other ways to select the region of origin of the Clone Stamp tool?

    I use PSE 12 on a window 8.1 Thinkpad Yoga with active digitizer/pen (especially in tablet mode) and it would be great if I could choose the source without the keyboard autour must region. I don't think that there is an Alt key on windows on-screen keyboard. ?

    Thanks in advance.

    There is no alternative key and PSE offers no keyboard customizations (although I believe you can use keyboards created in Photoshop CS5, or earlier in PSE).

    The on-screen keyboard of Windows has an Alt key exactly where it is on a physical keyboard - next to the space bar.

    See you soon,.
    --
    Neale
    Insanity is hereditary, get you your children

    If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

  • Is there a Clone Stamp tool in LR 5?

    Is there a Clone Stamp tool in LR 5?   If so, I can't find it.   Photoshop Elements has this tool.  There is a tool of cash withdrawal, but this isn't the same thing.

    The spot Healing Brush tool, which is available in Lightroom. He has a clone and an option of healing. But if you have some complex cloning, you want to do you will find probably easier to take the Photoshop Elements image and do the work there.

  • The PSE 8.0 Clone Stamp tool

    Hi, my Clone Stamp tool has more 'normal' in the menu drop-down selection option. Can anyone help?

    End of the options on the left-hand toolbar, click the tiny triangle > Reset tool.

Maybe you are looking for

  • Training camp crashed, now have 106BG unusable space.

    Training camp crashed during disk partitioning. Williams-MBP: ~ the williamruiter list $ diskutil / dev/disk0 (internal, physical): #: NAME SIZE TYPE IDENTIFIER 0: GUID_partition_scheme * GB 251,0 disk0 1: disk0s1 EFI EFI 209.7 MB 2: Apple_CoreStorag

  • Can I have a unique password and ID authentication for accounts and FireFox Sync?

    I can't keep my ID and password held for accounts of Firefox, Firefox Sync and Mozilla. Some how I have used two different e-mail accounts, and they have different passwords.I use a MacBook with OS X 10.1.1 and FireFox 34.0

  • M70-159: need graphic driver for Windows 2003 Server

    Can someone tell me wheather I can install windows 2003 server to series M70-159 .I am trying to download driver for sound card and many other cards, but I'm not able to get one for windows 2003

  • OfficeJet 4630: Install new printer - ink cartridge problem

    I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new car

  • MCI32. OCX missing or invalid

    I have an executable written in VB by a friend. There is no installer; It was all in one. ZIP file. When I try to launch it, I get a dialog box saying: «component "MCI32.» "OCX' or one of its dependencies is not correctly registered: a file is missin