Follow-up of applications for security delays

Similar Questions

• Need help, trying to decipher my Panel event logs control for security and applications.

  Hi, I need help trying to figure out how to decipher my control panel the security event logs and logs application for account hacking.

  All the advice to learn how to see what who are normal and what is malicious?

  Occurrences of breach possible system, based on very high traffic for the opening of session and closing session and special privilege settings.

  Please notify.

  HP Pavilion DV9700 entertainment

  Windows Vista SP1 Home Premium 32

  I'll leave this thread closed, since I work with other people on another forum on this topic.

• "Server error in ' / ' Application FOR WINDOWS LIVE

  It is my ONLY computer connected to a modem/router to Bright House.  I am able to type in the bar 207.46.105.172 and go on my account but I wouldn't to sen email instead give me the following:

  Runtime error

  "an application error has occurred on the server.  the current settings of error customized for this application prevent the details of the error in the application being viewed remotely (for security reasons). It may, however, be viewed by browsers running on the local server computer current." IT'S THE ONLY LOCAL SERVER MACHINE AND NOBODY DON'T USE IT REMOTELY.

  Help, please.  Thank you!

  Hi, Caesar,

  As you mentioned that you use Windows Live mail, you can post your question in Windows Live Mail support for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Windows Explorer application has requested to terminate in an unusual way. Please contact the support team of the application for more information

  Everytime I open Windows Explorer, I get this message. A window opens called Microsoft Visual C++ Runtime Library and he says: "this application has requested the execution to terminate in an unusual way. Please contact support team of the application for more information. "I clicked the OK button, he is looking for a solution and then closes the program. Is there something to the recent update that messed up? Help, please!

  (Moved to programs)

  Hi Thom,

  I apologize for the delay in response. I suggest to follow the steps in the link below and check if it helps you.

  Follow the steps provided by M_Sion.

  https://social.technet.Microsoft.com/forums/Windows/en-us/3a6e2cfe-ef5b-4547-A832-946a3cc82e8e/Microsoft-Visual-c-runtime-library-runtime-error?Forum=w7itproappcompat

  Follow the steps provided by Srimadhwa B

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Microsoft-Visual-c-runtime-library-runtime-error/f32da816-d8a7-4B05-9975-b9f4144af62b

  Let us know the status of the issue, we will help you.

• When I try to singning in I have the cloud but it show your id is blocked for security reasons also paswrd is correct Please unlock my icloud id

  My icloud id had been blocked when I apply the right password in my icloud id then display shows the error msg contain, your id has been blocked for security reasons "I forget my security questions help me kindliy inthi held. Thank you very much

  Follow the steps in this article to reset your security questions:

  If you forgot the answers to your questions of security of Apple ID - Apple Support

  especially in the last paragraph:

  You cannot send an e-mail to reset, if not an alternate email address, or cannot access the e-mail to your e-mail address of rescue, call us for help.

• My Apple ID has been locked for security reasons, but I can't unlock it using the steps required.

  I get a message saying my ID has been locked for security reasons, and I can't send or receive e-mails from my address to iCloud. If I follow the steps to unlock my account it does not. What is happening and how to fix this? I don't have any Apple Store anywhere near me since I live in Crete, so I can't easily take my iPad to an expert.

  Start here: https://www.apple.com/support/appleid/ and click 'Contact Support' (lower-right).

• OMEN of HP for laptop - 15-5001na: I need all applications for an omen of HP

  Can I have applications for my laptop (HP Omen) please. I restarted my laptop which means that I deleted my apps and I tried to install all my apps but I unfortunately couldn't find the Apps that I got when I started to use my laptop for example, I could not find the application of control of harbinger of HP and one more for the NVIDIA graphics card and I think that something else : This app has all the applications that I had at the beginning. Please answer as soon as possible. THX.

  Hello

  First of all, make sure that you have installed the utility HP System event on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73248.exe

  Then, install the following:

  Omen Ops Central.

  Control of omen.

  NVIDIA software.

  You can also download the Performance Advisor tool from the link on the next page.

  HP Performance Advisor.

  Find other software/drivers on your Product Page.

  Kind regards

  DP - K

• I want to learn to make applications for iOs. Where should I start?

  Hello. I want to learn to make applications for iOs. Where should I start?

  The following may help: https://developer.apple.com/library/ios/referencelibrary/GettingStarted/Developi OSAppsSwift /

• Update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Windows 7 to stop working.

  Original title: Updates

  The last update update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Win7 stop working. This includes IE8, MS Office10 and a few others. Whats with THAT! I have updates blocked for now, until the writers get it sorted.

  Hello

  The article mentions that this update cannot be uninstalled. This software update is a prerequisite to install a service pack. In addition, this update improves reliability when you install or remove service packs and updates for Windows Server 2008 R2 and Windows 7.

  http://support.Microsoft.com/kb/976902

  Since you have problems with Internet Explorer 8 and Microsoft Office 2010 after installing the update, I suspect the involvement of a third party software conflict. I would like you to put your machine in aclean boot State in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart the computer as usual.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Recently, I got a message saying ' not enough system resources to open the application' for example to explore or outlook express.

  ?? Resources

  My computer has been works well, but twice recently, I got a message saying ' not enough system resources to open the application' for example to explore or outlook express. Restarting it works again, but why the message?

  Hi RaymondWilson,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Perform a System Restore and check the issue persists.

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• Cannot send email: message that the system has been temporarily disabled for security reasons

  original title: cannot send e-mail

  I can't use the system of electronic mail by default on my computer to send e-mail.  I get the message that the system has been temporarily disabled for security reasons.  I am told that when I close the screen, a series of numbers will appear and typing reactivate the system.  However, no figure never appears.  What can I do to get this thing working.  I really need.

  Hi marniez,

  Please see the thread similar to the following for a solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/my-new-Windows-Live-email-system-is-locked-by/4a96dc32-d8a8-4FD5-a97d-ec45264fe839

• When I opened e-mails. doc or pdf, this message appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  Original title: side-by-side configuration is incorrect

  When I opened, try opening some emails. doc or pdf, this msg appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  I'm going to log events, but how to solve the problem by putting the RIGHT configuration to?

  Thanks in advance

  Hello

  1. when the question is is produced?

  2. you remember of any change to your computer before the problem?

  3. are you using a 32-bit operating system or a 64-bit?

  Please visit: What are the information in the event logs? (Event Viewer)

  In the meantime, follow these steps and check if they help.

  Step 1:

  I suggest you install the Visual C ++ 2005 Sp1 Runtime and check if the problem persists:

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en

  Step 2:

  If this does not resolve the issue, I would have you done SFC scan on your machine to check if the problem is related to missing or corrupted system files.
   
  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Application for approval of application

  Support good day,

  I have 4 tickets opening against one of my applications for approval and I have send some request via the support system, no answer on either.

  Provider code: 35124

  Tickets:

  • 884869 - 08 Mar 2013
  • 887074 - 10 Mar 2013
  • 888608 - 11 Mar 2013
  • 894060 - 13 Mar 2013

  I'm tired out a new application, lasts how long the approval process?

  Best regards

  André

  We recommend usually 7-10 business days for approval.

  However, we are still processing delay of the launch and should be in our general approval of the PACE soon.

  Thank you for your patience during this period. Tickets have now been addressed.

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com