IdeaPad Z580 trouble with smart touchpad after upgrade of Windows 8

Similar Questions

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• Have problems with the Audio after upgrade to Windows 10

  I got a free upgrade for Windows 10 option on my laptop Acer Aspire SW5-011. Everything seemed to work fine, except that I don't bother checking the audio before deleting the files Windows 8... Even if the computer thinks that the Audio drivers work very well that they are not. I have tried everything that I could find online to see if I could get any sound, but nothing has worked. I updated the drivers, kidnapped rebooted and updated the drivers, I tried to find the other acceptable drivers and other follow-up steps. "When I go to reading tab in the sound and click speakers, and then I go to the Advanced tab, the default format said, ' 16 bit, 48000 hrtz ' is grey, I can't click on it and when I try to test it says:"Cannot play testtone" It's as if something prevents me from accessing or it acts like I'm not pregnant? The speaker driver is called "Intel SSD Audio Device. The audio worked fine before downloading. Is it possible to fix my Audio, or to have access to it yet?

  Good so I had to update my post because I had to give the good news! However, that is how I am and I almost try everything and tinkering with different things. My audio works now. I went back the download Acer drivers and manual for my camera and I checked under 32-bit Windows 8, which was windows available. I installed my ID which has been deleted before when I had restarted or any number of things, I tried, and then I went in Drivers and installed the Master Installer. I made sure that I extracted all the files before proceeding with the installation. After it restarted my laptop I heard the Windows startup sound and I knew that it worked because I had no sound at all before. Not sure why it worked, but it did! I felt there was some sort of missing file or a compatibility issue, I'm just happy that the program helped master installation. http://us.acer.com/ac/en/US/content/drivers/5687;-; SW5-011 #_ga = 1.21697787.1131678756.1448199856

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Second monitor is not detected after upgrade to Windows 10

  After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

  I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• HP Touchsmart 23-d055: do I need a new recovery disk after upgrade to Windows 10?

  I upgraded my 2 years, HP Touchsmart in Windows 8 for Windows 8.1 for Windows 10. It took me 6 hours to run all of these updates.

  Now, HP Support Assistant keeps reminding me to create an image of system recovery. But when I run the recovery media creation utility, it warns me that he goes back to the original operating system (Win8). Is it possible to create a recovery image system for my machine on Windows 10?

  I know that Windows 10 now has an automatic recovery partition. But I am concerned by the failure of the disk, which would make this unnecessary partition. Last year, when I've upgraded to win 8.1, I had an alteration of the disc that has occurred without known reason. I lost everything on the PC and to restore Win 8, and I've never touched the PC up to 10 Windows free update is out.

  I created a USB Win8 recovery disk when I got the machine. This is my only alternative? I suppose that if I ran the recovery media creation utility, it would recreate just the same.

  BTW, I know that HP has here a document, but it does on computers provided with Windows installed 10.

  • HP computers - create and use a Microsoft recovery USB drive (Windows 10)
  • http://support.HP.com/us-en/document/c04641788

  Thank you for your help and experience.

  Since no one has replied with an answer to my question, I've finally worked it on my own. I learned that you cannot make a new recovery disk system after the upgrade to Windows 10, if you had already created one when you got your machine under Windows 8.x

  Context: after upgrade to Windows 10, the HP Support Assistant kept prompting me to create a system recovery disk.  I did one when I got the machine 2 years with Win8.  I didn't replace my original recovery disk, so I went out and got a new 16GB USB flash drive. When I inserted this new drive and attempted to create a recovery disk, the PC told me I couldn't do one, because you are allowed to make a recovery disc by PC.

  So it was kind of stupid that after completing the upgrade of Windows 10, HP Support Assistant tells people to do. It should just check itself and see if a disc has already been done. All this anguish for nothing!

• ProBook 4520 s camera issues after upgrade from Windows 7 to Windows 10

  ProBook 4520 s has problem with webcam after upgrade to Windows 10.

  Skype and other software do not have access to the camera.

  Drivers installed after the upgrade - universal HP (Realtek driver) looks OK in Device Manager.

  FIX:

  -Deletion of Arcsoft Camera sharing (installed on Windows 7 at first) in the Device Manager.

  -Download and install PC Camera Driver from Realtek Realtek support on site area:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=30&PFID=43&level=4&Conn=3&DownType...

  NB needs to restart.

  Skype now see camera and works OK.

  Solved.

• Wireless button not work (orange rest) after upgradation from windows 8

  the orange wifi light does not change to white light after upgrade to windows 8 windows edition OS Home premium. I don't use the pavilion dv6-7011tx laptop, my product. is. B0P39PA #ACJ this is very frustrating as theres no wifi as well as bluetooth connectivity, the solution button wireless key doesn't help. HP guys please give a solution that we expect more than a month.

  If you open Device Manager (key Windows + X and select Device Manager) and see an unknown device with the following details as in the picture.  I had the same bad experience when I upgraded my Hp Envy17-3002ea loan last weekend.

  

  then download and install sp59720 should do the trick.

  Best regards

  ERICO

• Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

  Hey!

  I can't get my card reader works after upgrade to windows 10 64-bit...

  Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

  "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

  Have you ever tried the Realtek website?

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

• Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

  Hi all

  Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

  His output HDMI for my Sony LED used previously to work properly.

  But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

  I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

  Thank you.

  I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

  To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• I will face any hardware problem after upgrade to Windows 10?

  Original title: upgrade Windows 10

  I have a Dell Vostro 1015 running windows 7 Professional. I am considering upgrading to Windows 10. Please advise if there are problems if I upgrade any hardware after upgrade to Windows 10, e.g. upgrade or downgrade RAM.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to upgrade your Windows 7 operating system Windows 10 machine. I will certainly help you get this fixed number.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Upgrade to Windows 10: FAQ

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

  Hope the helps of information. Please write back to us for any further assistance. We will be happy to help you.

• Data lost after upgrade to Windows 10

  From Windows 7 to Windows 8, the address book and all the information has been lost. He did not return with Windows 10. A professional computer man could not find.  Help, please.

  Hello

   
  Please contact Microsoft Community.
   
  Please confirm this information to help you better:
   
  1. the application or the e-mail client you use. ?

  2. are you able to access the contacts folder by using the web browser. ?

  3. Apart from the missing contacts, it is able to send and receive emails after upgrade to Windows 10?

  Get back to us with the required information, we will be happy to help you.

   

   

  Kind regards

  Anusha

• Black screen after upgrading to Windows 10

  I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

  can help me, thanks

  Bill

  Hello

  I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

  I suggest you refer to the suggestion of Sharath Srinivasa on August 7^th, 2015:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.