Follow-up of the object? Selection of objects?

Similar Questions

• Grant select on the object a.a to user b to user test

  Hello

  I am logged in as user test.

  I would like to issue the following grant.

  grant select on a.a to user b;
  

  Unfortunately, this does not work with the test user. But it works with SYS. What permissions are required for the declaration works as a test.

  Best regards

  Stone

  Documentation, https://docs.oracle.com/cd/E11882_01/server.112/e41084/statements_9013.htm#SQLRF01603

  Prerequisites

  To grant a privilege to system, one of the following conditions must be met:

  • You must have obtained the GRANT ANY PRIVILEGE system privilege. In this case, if you grant the system privilege to a role, then a user who has been granted the role doesn't have the privilege unless the role is enabled in the user's session.
  • You must have been granted the privilege of system with the ADMIN OPTION . In this case, if you grant the system privilege to a role, then a user who has been granted the role has the privilege without worrying if the role is enabled in the user's session.

  To grant a role, you must either got the role with the ADMIN OPTION or have received the GRANT ANY ROLE privilege system, or you must have already created the role.

  To grant a privilege object, you must have the object, or the owner of the object must have a permission you privileges of the object with the GRANT OPTION , or you must have obtained the GRANT ANY OBJECT PRIVILEGE system privilege. If you have the GRANT ANY OBJECT PRIVILEGE , then you can grant the privilege of the object only if the owner of the object could have granted the same privilege of object. In this case, the GRANTOR column of the DBA_TAB_PRIVS view displays the owner of the object rather than the user that issued the GRANT statement.

• Select only the objects in a rectangle selection

  I am a new user of Illustrator CS5, switching from Freehand. I'm trying to find out if there is a way to select only the objects in a marquee? In AutoCAD, you can make a selection on the left window to the right and only those objects entirely in the window are selected. If you the window right on the left all the objects that are "crossed" or affected by the window are selected. Is there a similar technique in Illustrator?

  Currently, I have to select the objects, and then go back and hold the SHIFT key to deselect the object I don't want, or place objects on different layers and then lock the layers to prevent additional items get selected.

  In AutoCAD, my main program, you simply draw a window selection, left or right, depending on what your next step would be. No special tools or rocking or thinking, that's just the selection primary process and very intuitive.

  I posted a discussion on the Illustrator forum several months ago, which still arouses comments so this seems to be a tool that would be appreciated by many users. Someone posted a script but it has not worked for me yet.

  Thank you for everything that you can do to solve this problem.

  This is a copy of my last post of the original thread. I found some discussions confused because I have no experience in writing or by using scripts. So I copied all the recommendations in a document to read without the comments and digressions. After several hours and a lot of searching on Google I found what solution adapted to my goal, which was a selection process fast and simple with fewer steps to use.

  So, I think I have this job. The following is what I did:

  1 copy the script by Carlos Canto post #11 here:

  http://forums.Adobe.com/thread/856221?start=0&TSTART=0

  2. open the ExtendScript Toolkit Utilities > Adobe utilities - CS5.5 > ExtendScript Toolkit CS5.5 > ExtendScript Toolkit CS5.5.App

  3. when the program opens, paste the script in the large Panel on the left.

  4. then go to file > save as.

  5. that the dialog box click on the arrow next to the save box slot to expand the section options.

  6. next, go to Applications > Adobe Illustrator CS5.1 > Presets > en_US > Scripts.

  7. then, in the Save as box enter a name to identify the script (I named mine Window1).

  8. click on save and close the Toolbox.

  Launch Illustrator and open a drawing.

  1 using the rectangle tool, I drew a rectangle around the objects.

  2. make sure that the new rectangle is selected.

  3. I went to file > Scripts > Window1.

  4A got an error message - error 8705: target layer cannot be changed 25-> iart.selected + true line:

  Oops, you must have ALL unlocked layers.

  5. you click OK.

  6 unlocked all the layers.

  7. my new activated rectangle.

  8. went to file > Scripts > Window1.

  9 here! Items in the rectangle are selected and the rectangle is removed.

  So yes, this script works as requested. Thank you, Carlos.

• The text of the e-mail under the column of the object does not match the selection

  When I get to my Inbox and select an e-mail to open the middle box and the text box below do not match the selection in the object column. This has occurred recently and only on my laptop. My office works fine. The central area and the text matching, this email has been deleted but the text won't just change and go. I'm going on a trip tomorrow, and if I can't fix this, I won't be able to open emails with possible solutions. I'll see answers but can't open them.

  right click on the folder, select Properties, and then on the button repair.

• How to stop Office selection icon IE become highlighted when the mouse moves on the object

  When I move my mouse on the screen and it passes over a desktop icon; and I accidentally press right or left button over an icon, this icon is moved from the current position to a different position is determined by when I am is now the button.

  What I would really like is that the selection and highlighting of an icon only would be finished when I specifically on the right or left when right-click on the object. Then to move the icon I would have left, or right click the highlighted

  Hello

  According to the description of the problem, it seems that you are facing problems with the highlight and select the icons on the desktop.

  As the operating system is designed and it is obvious that just by moving the mouse and selecting a folder or icon for awhile Office holding down the button left or right moves the icon or folder somewhere else.

  It will be useful.

• The term 'Select-Object-property' is not recognized as a cmdlet, function, script file or executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  I have a fairly new version of PowerCLI (5,5 Rel 1) 5.5 being ESXi and vCenter.

  I also checked that automation. Core is installed:

  PowerCLI C:\Windows\system32 > Get-PSSnapin VMware.VimAutomation.Core

  Name: VMware.VimAutomation.Core

  PSVersion: 2.0

  Description: This Windows PowerShell snap-in contains the Windows PowerShell cmdlet

  TS of vSphere management.

  but after connecting to vCenter, I get error trying to run:

  PowerCLI C:\Windows\system32 > $Results = ForEach ($DRSRule to $DRSRules)

  > > {}

  > > «|» Select-Object-Property @{N = 'Cluster'; E = {(Id-vue-Get $DRSRule.Clust)}

  amplifier. {{ID). name}}.

  > > @{N = "Name"; {E = {$DRSRule.Name}}.

  > > @{N = "enabled"; {E = {$DRSRule.Enabled}}.

  > > @{N = 'Type of DRS'; {E = {$DRSRule.KeepTogether}}.

  > > @{N = "MV"; E = {$VMIds = $DRSRule.VMIds - split ","}

  > > $VMs = ForEach ($VMId to $VMIds)

  > > {}

  > > (Get-View-Id $VMId). Name

  {> >}

  {{> > $VMs - join ","}}

  {> >}

  > >

  The term 'Select-Object-property' is not recognized as a cmdlet, fu

  function, script file or executable program. Check the spelling of the name, or if

  a path was included, make sure the path is correct and try again.

  On line: 3 char: 32

  +     "" | Select-Object-Property < < < < @{N = 'Cluster'; E = {(Get-view-Id $DRSRule

  . {{Cluster.Id). name}}.

  + CategoryInfo: ObjectNotFound: (Select-Object-property string :)

  [], CommandNotFoundException

  + FullyQualifiedErrorId: CommandNotFoundException

  PowerCLI C:\Windows\system32 > Add-PSSnapin VMware.VimAutomation.Core

  Is ' Select-Object-Property not installed?  If not, where I get it, please?

  see you soon

  KC

  Note, I received this Dean here code: PowerCLI: extraction rules DRS; Deans blog

  There should be a space between the - Property parameter and Select-Object

• I have problems to select any object in Illustrator. When I use the tool Selection (V) it does not select the whole shape, but leaves the contoured selection and the appearance of anchor.

  

  

  In Figure 1 we can see how the object is selected and the option to increase and decrease the size by clicking on the path and dragging it.
  
  
   
   
  
  In figure 2 we can see that the selection has changed and there are now around the anchor Fig . This prevents the increase in size of the figure .
  			 
  In your second picture, the bounding box is hidden.
  Go to view > see the bounding box
  Move B Cmd (Mac)
  Shift Ctrl B (Win)
  		   

• Can I move all the objects again selected layer without clicking hundreds of layer bars?

  I'm working on a complex illustrator file generated by GIS software. He gave me all kinds of groups of clip & road clip - what I really need, it's just to put all the same coloured polygons on the layer of a high level (unfortunately I can't draw all of my polygons in a group because illustrator doesn't pull these objects out of their existing clipping groups, and the card gets screwed completely upward if I release the clipping masks. With simple cards I have no problem Direct by selecting all of the polygons, I want, selecting their layers in the layers panel, then moving them to a new layer. This card is too complex, because there are hundreds of objects and hundreds of corresponding layers (they are not contiguous, or else I could simply click can be done with it).

  
  

  I used select > same > fill type to select all the polygons, I want that on a single layer, but I really hope that I don't have to select all the layers for each item one by one before I can move them to a new higher level layer. Does anyone know if there is a way to moving all the objects in a new layer selected without having to actually click all the layers in the Panel? Completely open to the alternative routes to my desired result!

  
  

  Thank you very much.
  
  

  Of course, after making the selection drag selection (to the right of the layer) icon on the desired layer. This will move any selected layer to the new layer.

  

• Select dbms_metadata.get_dependent_ddl fails with ORA-31604 still exist for the object

  Hello

  In the DEPENDENCIES of DBA, I can see that I have (seen here) according to some a table objects:

  -SQL > select type, name

  -2 from dba_dependencies where REFERENCED_OWNER = upper ('stuff')

  --3 and REFERENCED_name = upper ('st_tab') and type = "VIEW";

  -NAME OF THE OWNER TYPE

  -- ----- ----- ------------------

  -VIEW STUFF STTAB_4MV_VW

  -VIEW STUFF STTAB_VW

  But trying to recover these definitions 2 times I get an error:

  -SQL > select dbms_metadata.get_dependent_ddl ('VIEW', 'ST_TAB', 'STUFF') def double;

  -ERROR:

  -ORA-31604: NAME parameter invalid "BASE_OBJECT_NAME" for the type of VIEW object in the function SET_FILTER

  -ORA-06512: at "SYS." DBMS_SYS_ERROR', line 116

  -ORA-06512: at "SYS." DBMS_METADATA_INT', line 4705

  -ORA-06512: at "SYS." DBMS_METADATA_INT', line 8582

  -ORA-06512: at "SYS." Dbms_metadata", line 2882

  For some objects, it works (triggers, index), but for others (views, procedures, packages), it still fails with ORA 31604.

  If I make a direct call on dbms_metadata.get_ddl ('DISPLAY', 'STTAB_4MV_VW', 'STUFF'), it works fine.

  Everyone has seen this behavior before? (tried this code on 10g and 11g)

  Thank you very much.

  Kind regards

  SEB

  For some objects, it works (triggers, index), but for others (views, procedures, packages), it still fails with ORA 31604.

  Exactly! That's what he should do. Dependent on DOF is for objects that are actually part of the table.

  If I make a direct call on dbms_metadata.get_ddl ('DISPLAY', 'STTAB_4MV_VW', 'STUFF'), it works fine.

  Exactly! That's how you get the DDL for views and other types of distinct objects. Provide you with the type of object as the first parameter.

  Everyone has seen this behavior before? (tried this code on 10g and 11g)

  Sure! This is a normal behavior.

  See chapter doc DBMS_METADATA packages and Types

  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28419/d_metada.htm#i1019414

  Notes on use

  • These functions allow you to extract metadata for objects with a single call. They encapsulate calls to OPEN , SET_FILTER , and so on. The function you use depends on the characteristics of the type of object and if you want the DDL or XML.

  • • GET_xxxis used to fetch named objects, especially schema objects (tables, views).

    • GET_DEPENDENT_xxxis used to extract dependent objects (audits, grants of the object).
    • GET_GRANTED_xxxis used to retrieve issued objects (System of subsidies, scholarships of role).
  • For certain types of objects, you can use more than one function. For example, you can use GET_xxx to fetch a name index, or GET_DEPENDENT_xxx to fetch the same index by specifying the table on which it is defined.

  See also table 74-11 in this doc for a table showing the types of objects.

  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28419/d_metada.htm#BGBIEDIA

• I would like to cut out an object using the Quick Selection tool and drop the object into another image. Can anyone help

  I use background images and want to cut objects of other JPEG files using the Quick Selection tool and drop them in the background image. So if I have a banana and select the object, I need to copy the banana in the context on the other.

  Hope it makes sense.

  Gary

  Select the banana. Right click > copy layer. Move tool. Click and drag to the other file. Place on the image.

  GOLD: load history and banana in a stack (file > Scripts > load file in the stack). Select banana and layer for copy or create the layer mask.

  Benjamin

• The display area moves and focuses on the object when it is selected

  I recently downloaded 6 Captivate and when you edit a slide if I select a subject it focuses on the object and he spends a large part of the blade out of the display area.

  For example, I'm working on a blade with about 10 possible answers multiple choice quiz and as I change these answers he focuses on the first answer while he is sitting on it. For me change the background display options I manually move the slide because I can see them no longer.

  I'm sure that there is a simple answer, but I checked the preferences, opinions, online forums and I can't find anything on this and it's driving me crazy.

  Thank you!

  Hello

  You can also view > view and then zoom back, to decrease the size of the slide in the main pane.

  Or

  If there is no unexpected behavior when you use the workspace or by using features, you can reset the preferences:

  Here is the procedure:

  Captivate's preferences folder location is:

  [Windows 7: C:\Users\[user name] folder of Captivate 6 \Local\Adobe\Adobe \AppData (hidden folder)

  Windows XP: Settings\Application Data\Adobe\Adobe Captivate 6 record - [user name] C:\Documents and Settings\

  Mac: /Users/ [user name] / Library/Preferences/Adobe Captivate 6 folder

  You will first need to close Captivate 6 and then rename the folder 6 Captivate 6_OLD Captivate.

  Then restart the captivate and check if this solves this problem.

  Re-create the preferences resets all settings and customization of Captivate, but won't have any changes to your project.

  Thank you.

• Select all the objects with 2pt STROKE?

  It is possible to select all objects with a particular characteristic, such as a specific line width? I know I can do this by selecting an object, and then choose Select all. But I want to include as part of a batch action, so I need to be able to specify the choice so that it can be completely automated. If I have to choose one of the objects for each file, it defeats the purpose of the action of batch processing.

  If this is not possible, I should ask in the forum script to help a script?

  NW

  With nothing selected, the value of the weight of the 2pt race. Now select > same > weight of the race.

  Set the weight of the race is registrable and if nothing is selected, then select it > same commands using what is defined in the panels.

• How to display the object selected in the current view?

  I have a file in illustrator with hundreds of layers and objects. If I select an object for targeting in the layers panel, is it possible that I can get the items to display in the center of the workspace. I currently have zoom and pan the document to see the object.

  Similarly, if I select an object in the document, is there a way to have this object appear in the center of the layers panel? I have currently to scroll the layers panel to find the parent layer and then down through the layers of the child until I found my selected object.

  Thank you!

  1. it's a feature request that has often been mentioned here. There may be scripts which do.

  2 see the command to locate an object in the palette menu layers.

• How to select only the objects in a marquee?

  I am a new user of Illustrator CS5, switching from Freehand. I'm trying to find out if there is a way to select only the objects in a marquee? In AutoCAD, you can make a selection on the left window to the right and only those objects entirely in the window are selected. If you the window right on the left all the objects that are "crossed" or affected by the window are selected. Is there a similar technique in Illustrator?

  Currently, I have to select the objects, and then go back and hold the SHIFT key to deselect the object I don't want, or lock layers to prevent additional items get selected.

  NO.

• Clicking on shadow selects the object. Possible to disable?

  As far as selection goes, shadow of an object is part of the object.  Clicking in a shadow selects the object.  However, if there are many objects close to each other and they all shadows, this behavior is annoying.  Is it possible to change the behavior so that the shadow is not hot?

  Using CS4 on Windows

  Thank you

  Todd

  -> Selection & anchor display preferences