Satellite C50D-A-13R and WIn7 - problem of USB 3.0

Similar Questions

• Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

  I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
  I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
  Windows found driver software for your device but encountered an erroe trying to install it.
  AMD USB 3.0 host controller
  The system cannot find the specified file.

  I try to point the location of the driver but same error.
  Other drivers installed ok only gives error

  I ve downloaded and unzipped the driver and everything seems OK.
  As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

  Try to download it again and start the installation manually.

• Satellite C50D A - 13 G - Bluetooth problem

  Hi, I'm new to the forum and not exactly very tech-savvy.

  I need to update the software on my Parrot and the site says I need to make sure that the Bluetooth device is installed properly on my laptop. According to the manual of Toshiba, some models have Bluetooth installed but I can't establish whether the mine or if I need to download something. The Parrot site mentions options upgrade using a Toshiba Bluetooth stack or a Microsoft Stack, whatever they may be!

  I have a Satellite C50D A - 13 G. Any help would be welcome!

  Thank you

  Babou

  Your laptop is BT on board. I recommend you to check the document s user manuals.

  You will find an exact explanation how to use BT and use it with external devices.

• Satellite A300-20 b and cooling problem

  Hello

  I have Toshiba Satellite A300-20 b and I have a cooling problem. Since I have this laptop I ve been tracking the temperature of the CPU and found out I got the maximum temperature was about 80 c. The strange thing is that the cooler starts only when the CPU reaches this high temperature, if it isn't the cold remains off.

  Another weird thing is that once it is not blocking the cooler starts. It stops only if I restart or shut down the computer. Is this normal? Should I worry about something? Thank you very much for your answers.

  OS: Windows 7

  Have you noticed the same thing with the settings and Vista preinstalled laptop?

• How to install this update and resolve problems of USB and the touchpad?

  I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
  Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

  The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

  The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

  This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
  Driver revision history:
  Twinhan VP704A Driver Release Notes
  -------------------------------------------------------------------------------
  Note:
  1. in the event that the system hangs when running with VP704A, please install ULI
  Host USB 2.0 in \ULiUSB20Driver driver

  2. for XP/SP1, please update with the patch in
  

  3. in XP/SP1, update driver will crash the system, while the new facility is ok.
  The trick to update driver XP/SP1 is illustrated in the following steps,
  a. uninstall the driver
  b. disconnect and reconnect the USB device
  c. install the driver
  4 to support the controller remotely, please launch Agent.exe in \Agent.
  Further details at \Agent\Readme.txt

  Known issues:
  1 multi-instance is not supported
  2 remote wakeup is not supported
  3. strong use of the processor from analog video/audio capture
  4. bad Signal using color YUY2 format IST
  5 AV sync if audio captured the wrong filter.
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
  6. noise with analog TV and FM Radio
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

  Driver revision history:
  -------------------------------------------------------------------------------
  2005-10-24, version: 1.0.2.8
  Bugs fixed and new features:
  1 is not correctly configured.
  -------------------------------------------------------------------------------
  2005-10-21, version: 1.0.2.7
  Bugs fixed and new features:
  1. the firmware version read FLASH OK!
  -------------------------------------------------------------------------------
  2005-10-14, version: 1.0.2.6
  Bugs fixed and new features:
  1.MUtil - access driver empty part lower part of screen when IST!
  2.MUtil - access HCT pilot check fix crash!
  -------------------------------------------------------------------------------
  2005-10-07, version: 1.0.2.5
  Bugs fixed and new features:
  1 tuner turns off when S-Video, Composite.
  -------------------------------------------------------------------------------
  30/09/2005, version: 1.0.2.4
  Bugs fixed and new features:
  1.agent.exe update for repeat bug!
  2.TI5150 sign up to fix video Format!
  -------------------------------------------------------------------------------
  2005-09-29, version: 1.0.2.3
  Bugs fixed and new features:
  1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
  Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
  2 reset TI5150 when a new frequency is defined
  -------------------------------------------------------------------------------
  2005-09-27, version: 1.0.2.2
  Bugs fixed and new features:
  1. difficulty I2C unstable access on some devices.
  -------------------------------------------------------------------------------
  2005-09-23, version: 1.0.2.1
  Bugs fixed and new features:
  1. analog TV becomes sometimes darker.
  -------------------------------------------------------------------------------
  15/09/2005, version: 1.0.2.0
  Bugs fixed and new features:
  1. difficulty of installation INF for Windows 2000.
  2 FM scan radio policy changed!
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.9
  Bugs fixed and new features:
  1 USB string serial number not visible with USBView, updated firmware required.
  2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.8
  Bugs fixed and new features:
  1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
  -------------------------------------------------------------------------------
  12/09/2005, version: 1.0.1.7
  Bugs fixed and new features:
  1. improve the performance of check channel lock status
  2 pinnacle INF Fix.
  -------------------------------------------------------------------------------
  2005-09-09, version: 1.0.1.6
  Bugs fixed and new features:
  1. Add an audio initialization function.
  -------------------------------------------------------------------------------
  2005-08-31, version: 1.0.1.5
  Bugs fixed and new features:
  1 separation of PAL and NTSC resolution mode.
  -------------------------------------------------------------------------------
  2005-08-30, version: 1.0.1.4
  Bugs fixed and new features:
  1.AvgTimePerFrame.
  2 frame drop.
  3 pinnacle inf file HCT chkinf fail.
  -------------------------------------------------------------------------------
  2005-08-22, version: version 1.0.1.3
  Bugs fixed and new features:
  1. add remote control interface in digital source filter.
  2.A new remote test tool that contains of the source code in \Test_RC.
  -------------------------------------------------------------------------------
  2005-08-16, version: 1.0.1.2
  Bugs fixed and new features:
  1. Pinnacel & Twinhan driver & file reorg.
  2.VP704A_BDA_Test tool, add a test to the system code.
  3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
  4 firmware update
  -------------------------------------------------------------------------------
  2005-08-15, version: 1.0.1.1
  Bugs fixed and new features:
  1 serial number feature is lost when the audio volume of the TV control
  2.RC6A support CIR
  (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
  The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
  EEPROM must be flashed with \Firmware\M9207.bin)
  3 Serieal, MAC address and name of device OEM taken in charge.
  Please see for more details on the \Firmware\readme.txt.
  4 Ioclt example source code included.
  -------------------------------------------------------------------------------
  08/08/2005, version: 1.0.0.10
  Bugs fixed and new features:
  1. increase audio volume analog TV.
  -------------------------------------------------------------------------------
  04/08/2005, version: 1.0.0.9
  Bugs fixed and new features:
  1. analog TV Video mode failed.
  -------------------------------------------------------------------------------
  2005-08-03, version: 1.0.0.8
  Bugs fixed and new features:
  1.off - centerf frequency scan + / 125Khz
  2 difficulty program a copy scanned in MCE.
  -------------------------------------------------------------------------------
  02/08/2005, version: 1.0.0.7
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.6
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
  2. improve the stability of I2C communication.
  3 unify signaling resistance & quality as a THBda ioctl interface.
  4 capture filter lock state control.
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.5
  Bugs fixed and new features:
  1. the same strength & quality signals as VP7046.
  2 debug build pilot
  -------------------------------------------------------------------------------
  2005-07-21, version: 1.0.0.4
  Bugs fixed and new features:
  1. put the INF update.
  -------------------------------------------------------------------------------
  2005-07-20, version: 1.0.0.3
  Bugs fixed and new features:
  1 improve performance in PCM4
  2 passage of the analog TV Mode to FM Mode failure
  -------------------------------------------------------------------------------
  2005-07-04, version: 1.0.0.2
  Bugs fixed and new features:
  1. production tool FM test OK!
  --------------------------------------------

  And here is the Readme file from the other file in the update?

  ************************************************** ************************************************
  ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
  ************************************************** ************************************************

  ----------------
  INTRODUCTION
  ----------------

  This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
  and Windows XP.

  -------------------------
  CONTENTS OF THIS DOCUMENT
  -------------------------

  1. installation instructions
  2. uninstall instructions

  ----------------------------
  1. installation instructions
  ----------------------------

  (Windows 98SE & Windows ME)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files in your Windows system, and then restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files to your Windows system, then turn off your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows 2000)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows XP)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -Click "NEXT".
  -This program will install and load the driver and you do not have to restart the
  computer.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller', proceed with the installation.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.

  Notice:
  If you can not configure driver successfully. Please restart your system, then follow
  steps to reinstall driver above.

  ------------------------------
  2. uninstall instructions
  ------------------------------

  1. open the "Control Panel" folder.
  2 call the "Add/Remove Programs" icon
  3 choose the "ULi USB2.0 Driver" section.
  4. click on the "add/delete" button to remove drivers.

  -----------------------------------
  Change list:
  -----------------------------------
  1.74
  1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
  2. support all USB2.0 Host Controller.
  1.73
  1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
  2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
  3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
  4 solve problem as wirless lan will disconect when the plug in usb device.

  1.72
  1 fix that system crash when HD USB copy large files.

  1.71
  1. improve the management of power in Win98 / Me.

  1.70
  1. improve the devcie detection function.

  1.62
  1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

  1.61
  1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

  1.60
  1. in support of functions power management when a HUB with the USB plug in device
  a root HUB.

  1.57
  1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
  2. fix audio problem that can not display smooth when peripheral USB connect to the system.
  3. fix system cannot detect DVICE USB when the USB device attached to the system in
  suspend mode.
  4 fix when root USB HUB have a full load, USB HD sometimes
  failure of the transaction.

  1.56
  1 fix that device of DVD decoder cannot display correctly.

  1.55
  1. fix OTI USB 2.0 drive hand cannot detect question.
  2. attach the USB mouse cannot be used after the resumption of hanging.

  1.54
  1. to improve the safety of the driver.

  1.53
  1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
  2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

  1.52
  1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
  automatically fix file system errors
  2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

  v.1.51
  1. to improve the compatibility of USB 2.0 card reader.
  2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

  v1.50
  1. improve the transfer block

  v1.48
  1. difficulty of installation of the USB 2.0 LAN driver hangs up
  2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
  3. fix some laptops starting hanging Win98SE

  v1.47
  1. improve the performance of bulk transfer.
  2. fix the failure of USB 2.0 Preview in bulk webcam.

  v1.46
  1. support USB 2.0 and 1.1 devices isochronous
  2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
  3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
  4. improve the capacity of the device detection in Win9X / ME

  v1.45
  1. fix system hang up when the mode standby ACPI.
  2. attach the mouse sometimes does not disappear when it is unplugged.
  3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

  v1.44
  1. composite crutch
  2 improve the detection of devices

  v1.43
  1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
  2 difficulty at high peripheral speed detected as full-speed device
  3. fix some problem of failure detection USB mouses
  4. fix some problem USB 2.0 Hub failure detection
  5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

  v1.42
  1. fix PC Card eject hang up in Win98 / ME
  2 difficulty of interruption/resumption hang up in Win98
  3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
  4. fix some failure detection of PC Card USB 1.1 devices

  v1.41
  1. Add new feature that system can install the driver ahead of the device is plugged in.
  2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

  v1.40
  1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
  2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

  v1.32
  1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
  If the path of the OS is not c:\windows.
  2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

  v1.31
  1. Fix problem that driver cannot install on Windows 2000.

  v1.30
  1 fix than Win9X / shows ME no USB 2.0 hub.
  2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
  3 Fix problem that sometimes when you click on "search the hardware changes.
  for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
  file is not found.
  4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
  verison of ULi EHCI controllers devices are connected and disconnected.
  5 install the driver support for several features of controller EHCI ULi existing on
  system at the same time.
  6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

  v1.20
  1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

  ULi Coporation. (ULi) web sites:
  http://www.Uli.com.tw/ (Taiwan)

  CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

  I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

  It is said above 2 relevant and 1 right ANSWER available...

  I'm new here, so anyone could direct me to these answers?

• Satellite A200 and Win7 - problem loading the graphics driver

  Hi guys I have a problem with my Satellite A200 (PSAF6A).
  I installed windows 7 just now, now half the time when I start the computer it displays a message on windows encounters a problem loading the graphics drivers and the resolution is terrible. When I restart immediately, most of the time, it loads fine - no message and a good resolution. I tried many driver reinstall but it is always the case.
  Someone knows what's the problem? Is this with windows 7, or do you think the graphics card can be on the road to extinction?

  Thanks for your help, a lot.
  -Chris

  Hello

  It was ok before installing windows 7? I don't think it's a hardware problem. Have you installed the driver for the Toshiba driver page?

• Satellite L850 - 1 HR and Win7-cannot install Display Driver

  Hello

  I reinstalled my laptop Toshiba Satellite L850 with old Windows 7. I installed all the necessary drivers. After you install the display driver in the device under display adapetrs Manager I see the message that the adapter is not working properly because the system cannot load the drivers.

  On Win7, it has also installed SP1. I don't see why drivers are not loaded correctly. Does anyone have an idea on what could be the problem?

  Thanks, Mateja

  Hello

  The Satellite L850 - 1 hr is equipped with a graphics chip from ATI Radeon HD 7670 M
  I guess that the ATI driver is not installed correctly.

  On the page of the driver Toshiba UE especially in Satellite L850 PSKG8E area, I couldn't find the Win 7 driver download.
  But I checked the drivers available for all series of L850 and I found the AMD display drivers.

  You should do this too. Choose the series of satellites L850 (short model No. Select all) in the driver download the form and you will get all the available drivers for Win 7 and Win 8
  AMD display drivers should be included too.,.

• Satellite A300D-15B - off and charging problem

  Hello

  I have a Satellite A300D-15B, running Windows 7 32 bit, which has bought used recently. I encountered some problems and I hope that someone can help me with!

  First of all, the day I got the machine, he spent all of a sudden, but turned back immediately and seems to be ok. Subsequently, 3 weeks later (Saturday 2 July) I was installing some software when I got an AGV virus warning, in a few moments the machine again is turned off suddenly. Unfortuanetly right now it will not turn back and the costs/AC power indicator do not come. After some research, I found that remove the BIOS battery and power dissipation allowed me to turn on the machine. Are there any known issues that could be the cause?

  Second, once I had the laptop to turn on after you stop suddenly on Saturday, I found that the charger will not yet be you register as being plugged in unless I have use the folling procedure.
  (1) disconnect the power cable fuse from the transformer block
  (2) remove the battery
  3) plug into the DC Jack
  (4) plug the power cord for the transformer that causes the power led on the laptop to turn on.
  (5) reconnect the battery

  The laptop then charges normally, I use it to write this post.

  I must use this process whenever the unit is unplugged the sector or charger, which is irritating and also concern that there could be trouble on the horizon.

  Any help would be much appreciated.
  see you soon
  John

  Hi John,.

  You wrote that your laptop runs with Windows 7 and the first question you mentioned could be linked to the operating system only. You can test one thing please? Restore factory using Toshiba recovery disc. The disc will restore original settings of the case which is pretested by Toshiba.

  If it s just a software related problem the recovery disc will resolve this problem.

  Unfortunately, it could be a malfunction of the motherboard also. Are you using the original Toshiba AC/DC adapter or 3rd party one?

• Satellite C660P - 11 p and WXP - problem has been detected

  I tried to install OS XP Professional SP1 + SP2 on my Toshiba Satellite C660P - 11 p, but after aprox. 1 minute from starting installation of Windows, the following message was displayed:
  "A problem has been detected and Windows has shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:
  Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK/F to check for hard drive corruption, and try again.

  I tried to install OS again, and the same message appeared.
  I don't know what I can do to solve the problem.
  How can I remove the installed hard drives or hard drive controllers?

  Thank for your help anticipate

  And during the original installation of Windows 7 everything becomes OK?

  I put t know what you mean with SP1 + SP2, but when you want to install WXP Windows XP edition family SP2 or WXP including SP3.
  You have loaded driver SATA?
  You use the compatibility mode for the SATA option in BIOS?

• C55 - A satellite - 1 K 6 and Win7 - cannot use utility of Toshiba sleep

  Hi everyone;

  My laptop model is; Satellite C55 - A - 1 K 6

  My laptop part name: PSCGAE-04W01GTE

  I use Windows 7 Ultimate SP1 X 64 on it...

  TEMPRO told me "install Toshiba official sleep utility program" frequently, but when I download and install, when I try to run via the shortcut to my computer I get "Cannot get Hardware Information" error and then sleep Utility page open, but all features are disabled inside, as you can see below.

  I can't tick the checkbox ' activate sleep and Charge "... You can see his screen capture here-> [http://alpman.net/slputlty.jpg]

  Power USB standby is turned on in the BIOS, but I still have the same problem...

  Can someone help me please?

  Thank you...

  You have installed all the other tools and utilities, especially Toshiba value added package?

• Satellite L70-A-154 and WIN7

  Hello
  I plan to buy a [Satellite L70-A-154 | http://www.toshiba.be/fr/laptops/satellite/l70a/satellite-l70-a-154/], but it is possible and easy to install Windows 7 Pro?
  Thanks :)

  Hello

  I ve checked the download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and I must say that this model of laptop is supported for Win7 64 bit and you can find drivers, tools and utilities there.

  Win7 installation should not be problematic.
  Please note: when you purchase your beginning of laptop preinstalled original OS and CREATE a RECOVERY MEDIA before you start to install Win7.

  It is very important.

  If you need assistance with installing Win7 let us know.

• Satellite Pro U400 starts and overheating problems

  Hello

  6 weeks ago, I bought a Satellite Pro U400. Shortly after that I bought, I noticed that the computer overheating. After 1 hour of use, it becomes very hot in the touchpad area, as well in the base of the computer and on the touchpad itself. It is very annoying because I almost burn my fingers with the touch pad.

  The problems began 10 days ago. I had been using the laptop for an hour when it suddenly turned off without notice. Power outage? I don't know Don t. I looked like a sytem of overheating protection. My previous laptop had the same problem. After a few minutes, I was able to turn it back on.

  Then it happened again a few days ago, but it took me 5 minutes to turn on. Yesterday, it happened again, and after 45 minutes without response, I went to bed. In the morning, I was able to turn it on.

  This also happens when wifi is disabled, it is not only a problem with the wifi card, overheating of the system.

  Am I the only one having this problem? I will try to send it back to Toshiba for a replacement or a refund.

  Is this normal in a really new machine?

  Thank you

  First, the warming of the touchpad is normal for almost every laptop, due to construction. Under this, there are the HARD drive and it produces heat. With my last books, and it was not bad, too.
  But really to get so hot?

  Due to the protection against overheating, it is normal that you cannot turn on your laptop immediately.
  But the wireless card is not the device in question, because it's a very small piece of hardware and produce little heat.

  You said, you had this problem with your notebook previous too. Let me ask you, when you use your notebooks? What your table surface there or is there no matter what on that table cloth?

  What I can tell you right now is, to check your locations of fantilation for all dust or maybe you have objects near it so that hot air can not cool.

  Post edited by: InvaderZim

• Satellite A210 - 10 c and Win7 - SD card no longer works

  Hello, I have a question. Maybe someone has a solution to the following problem:

  I have the model Toshiba A210 - 10 c. I replaced the RAM to 4 GB and now run a vanilla install of Windows7 ultimate 64-bit. System works now very fast and reliable. The only problem is that the SD card is not detected. Does anyone know where to find the driver for Windows 7 64 bit for it. I probably only go back to 32-bit SW more just to get a pilot. A driver for a newer model would work?

  Thanks for your comments - Rainer

  Hello

  Is the card reader for SD card, already recognized in the device properly Manager?

  I can understand you without downgrading to Vista 32 bit is no option for you because you need an OS 64-bit for the use of all 4 GB of RAM.

  But not don t worry, you should try the 64 bit Vista driver as Timox wrote. Usually the Vista drivers also work on Windows 7. If not, you can try Windows 7 64 bit to another laptop as Satellite A300 model. It should also work on your model. :)

• Satellite 1670 very hot and noisy problem

  I borrowed a 1670 that I need for my exam in 9 days...
  The problem is that he had problems of heat in his younger years (apperently not directly a problem for the cpu, but the substance was so hot you couldn't sit with him on the knees)
  someone were volt-modded or something to get a fan for the air flow more...

  is it possible for me to put it back to normal, so it is not so noisy.

  Anders

  Hello

  I don't know exactly how old is this model of Satellite, but I guess that the reason may be dust. If there is no possibility is trying to blow out the dust and clean. I am sure that on this way the unit will get more air and it will be much better.

• Satellite L670-10 t and Win7 installation

  Hi all

  I own a laptop Satellite L 670, and recently I met a lot of difficulties with the server DNS and Windows 7.
  At the moment I live away from home where I bought it and I want to do a format, but I do not have the recovery discs / windows me.
  Is there a way for Toshiba to mail me drivers/windows? What do I have to pay? Note that I am always covered by insurance.

  Thank you

  Every new notebook comes with preinstalled OS image and Recovery save on the HARD drive so that you can install using installation mode HDD recovery image - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  How this works is described in manuals s too so I m asking you didn t inform you on your laptop and collect all the useful info how it works.

  If this does not work you have big problem but of all that, we can discuss later. To try first to install OS suite s Toshiba how document.