Follow-up on host character of the face

Similar Questions

• Illustrator puppets to the host character - issue of stroke

  Only, I finished my puppet and imported into host character, but a problem with a stroke.

  Some features (one to be precise) is not resized like all other traits, and I do not know how to solve this problem.

  I am posting the screenshot just to be more clear that I can

  the 3 first screenshots are:

  view from the front in illustrator

  

  Left profile in illustrator

  

  Right profile in illustrator

  

  all strokes have the same weight and as I noticed they are automatically resized by the host of characters adobe.

  
  

  everything is ok on the main view (view from the front in character animator)

  

  
  

  but the stroke occurs I turn face (keyboard triggered)
  

  as you can see, it looks good with the exception of only one on the nose which is not resized.

  

  What should I do to fix this?
  pls don't tell me to extend to all the games on illustrator... I would like to avoid this...

  Sorry for my bad English, I'm not motherlanguage.

  Thank you

  Alberto

  OK, I found why I had this problem.
  The problem was on the contour options

  Each shot was
  

  with the exception of this single trait which has been
  

  then they looked basically the same, but they were not!

  Thanks anyway
  You can close this post!

  See you soon

• License on the host character error

  Hello, I test the host character on my MAC preview and pops up the following error message:

  "Licensing failed because an active installation after effects CC 2015 could not be found. If please reinstall After Effects and launch it to sign in the creative cloud. »

  Already reinstalled After Effects and the problem persists, what should I do?

  

  This will help you to character animator license problem

• Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  For groups or layers Warp independently of their parent group, add a "+" to the beginning of the name of the layer in PS / HAVE. It's the same select group in the Panel of puppets and by checking the Warp option independently in the properties panel.

  Once a group is warping independently, it will be attached to its origin at the origin of the group from its parent by default. You can join a different handful in the parent using the fix to the popup in the properties panel. In Preview 3, if you want to move the origin, you need to do in PS / HAVE. In future releases, you will be able to change the origin directly in the Panel of the puppet.

  If this doesn't solve your problem, you can post a screenshot of the hierarchy of layer here, to see if there is another structural problem.

• When the host character come out?

  When the host character come out? I very After Effects this week and were reported by Adobe personnel on a cat that AE contained host character - but it's not. Thank you.

  Soon.

  Mylenium

• Control of host character mesh?

  Hi all

  I'm working on an animation of puppet very simple in the character animator / After Effects 2015.3 and problems with the mesh to communicate between the layers of the head and the body. The head is not properly attached to the body, and the parts that are are not what they are supposed to be. I tried to reorder the layers in photoshop and play with the mesh in character animator controls, but do not find something to help the problem.

  In the photos, you will see there is only one stitch for the body although I have not a '+' in front of the layer title and I unchecked 'independent chain', so I don't know why they are not connected. The other problem can be seen clearly in the male character because his arm movement is influenced by the head, which is frustrating. I took some screenshots where the mesh of clusters, since this is where I'd like having some control over how it is interpreted. The pictures are of different puppets, but were created with the same file names / etc.

  If anyone has any advice to improve the situation, I would appreciate it. If you need more information (i.e. screenshots) or files to examine more closely, please let me know.

  

  

  

  

  

  Thanks for the help!

  D.N. Ellis

  Just for the follow-up of this for anyone curious - we thought it through DM. It was to take the + on the bottom of the face, let be a mesh instead of an independent party.

• When you choose a webcam for use with host character, should what features I look for?

  When you choose a webcam for use with host character, should what features I look for in the webcam? For example, choose the one that captures full HD (1080 p)? Or any webcam will work? I just want to be able to make the motion capture process as easy as possible, so I think I must look over the webcam plug before you buy.

  Any webcam should work, but a higher resolution can improve the accuracy of tracking. Adequate/same lighting on your face is too important.

• OS3 and auto return to look at the face

  Hi all

  until the upgrade, if I was looking at an app, weather for example and then lowered my wrist, the next time I was looking at the watch is automatically back to the face of the watch, not the weather app. Now, this does not work and I can't seem to find the setting to choose this behavior.

  Any ideas?

  See you soon

  Waddo

  Hi Waddo

  On your iPhone, in the application of the watch, go to: My Watch (tab) > General > screen Wake - under the heading 'on screen Wake see the latest App', choose "While in Session".

  If that is already selected, but your watch does not regain the dial of the watch after the use, for example, the weather app, then the following steps can help:

  • Choose a different setting (for example to 8 Minutes of last use), wait a few moments and then change it back to the session.
  • Return the dial of the watch manually (by pressing the digital Crown) of any existing application, open before testing if the change came into force.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• status of landmark HP + generic host process for the + serious mistake WMI + system configuration utility + ALG pop-up messages

  I have a desktop computer, with Windows XP. He has a very good performance for 4 years. But in recent days, some of the messages appeared, and suddenly, the computer restarts. and if she did ' t restart directly, she performed very bad (gel + slowly). 6 messages appeared, they are:

  1 - generic host process for win32 services has encountered a problem
  2 - problem WMI
  3 - the system has recovered from a serious error
  4 system configuration utility
  Situation 5 - hp cue has encountered a problem
  6-application Layer Gateway service
  Help, please.

  Hi Alaa' Kabbani,.

  1. did you of recent changes made to your computer?

  2. which antivirus app do you use?

  3. What is the brand and model of your computer?

  I suggest to follow the steps below and we update on the State of the question.

  Method 1: Disconnect any new hardware

  If you have recently installed a new hardware device, the necessary driver so that the material can not be installed or the driver may be damaged or incompatible. To determine if this is true, follow these steps:

  1 unplug the appliance.

  2. restart Windows XP.

  If Windows XP starts successfully, there is a driver problem with the new material. Contact the manufacturer of the device for drivers updated to the device or to learn more about known hardware issues, so that you can reinstall the device.

  For information about how to contact the manufacturer of the device, refer to the Microsoft Web site at the following address:

  http://support.Microsoft.com/GP/vendors

  (http://support.microsoft.com/gp/vendors)

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If this method resolved the issue, you are finished. If this method does not work for you, go to method 3.

  Method 2: Disable automatic reboot in case of system failure

  If the system reboots continuously, do the following:

  1. reboot the computer.

  2. as the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

  3. use the arrow keys to select disable automatic system error rebootand press ENTER.

  4. If you receive an error message, follow these steps to search the Microsoft Knowledge Base for useful information about the error message:

  a. copy the text of the error message.

  b. visit the following Microsoft Web site:

  http://support.Microsoft.com

  (http://support.microsoft.com)

  c. type the text of the error message in the Search box, and then type the name of the product you are using, for example "Windows XP".

  d. click on Searchand try to find an article that will help you solve your problem.

  If this method worked, you have resolved the problem of your computer restarts continuously. However, you can continue to troubleshoot driver problems. See the "Symptoms" section again and determine which method to use to solve the problem.

  If this method worked, you are finished. If this method does not work for you, please try Method 3.

  Method 3: Use the known last good Configuration feature

  If you can start the computer successfully, you can use the known last good Configuration feature. This feature uses information that was saved the last time that you shut down the computer before the problems started. This feature allows to restore your registry settings and drivers to the previous information.

  If you are not completely sure what that means, don't worry. None of these reviews will damage your computer. However, you should be aware that if you do this, any changes made to your computer after the date of last known good configuration will be lost.

  If you have recently installed a driver and know a configuration problem, this method will probably work for you. Unfortunately, this feature does not solve the problems caused by missing drivers or corrupt or files.

  To use the last good known Configuration, follow these steps:

  a. restart the computer.

  (b) that the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

  c. use the arrow keys to select last good Configuration known (your most recent settings that worked), and then press ENTER.

  d. If you are prompted to select an operating system, use the arrow keys to select the operating system and press ENTER.

  If this method worked, your computer is restored to a good working state. You still have to investigate on what caused this problem. To do this, please see the "Next steps" section for troubleshooting resources more.

  Also refer to this link: Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=G1iW6Kb0x5J

  WARNING CHKDSK:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you have trouble following the suggested steps or if the problem persists, please let us know and we are ready to answer them for you.

• Movie Maker: fuzzying the faces

  I do a video presentation for legal systems on a diversion for the 1st time young offenders program.  I need to be able to fuzz out or make the face of the misty teenager to protect their identity?  Is there a function that I'm missing?

  I do a video presentation for legal systems on a diversion for the 1st time young offenders program.  I need to be able to fuzz out or make the face of the misty teenager to protect their identity?  Is there a function that I'm missing?

  =============================================
  If the source files are always blows... I blurs the faces in an image
  editing program before you import the photos into Movie Maker.

  If the source files are video clips... There is no blur face characteristic
  from Movie Maker. However... it is possible to do it with one layer...
  see the following article:

  Special effects in video
  http://www.Papajohn.org/newsletters/096-SpecialVideoEffects.html
  (Scroll down to: The World - Wide Custom XML effects)

  Try searching YouTube for: how to blur faces in video
  http://www.YouTube.com/

  Example:

  How to blur faces in videos
  http://www.YouTube.com/watch?v=n_X8jWng9aM

  Also... the following forum may be worth a visit:

  Movie Makers Forums
  http://www.windowsmoviemakers.NET/forums/default.aspx (Try a search of censor, pixelation, blur faces)

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Microsoft Fix It does not "Windows Script Host gave me the error message: cannot find engine\ 'VBScript' Script script.

  installed Microsoft Fix It.  When I try to launch it I get the message that there is an error during the MicroFix troubleshooting it won't work.  I can only use the online version.

  I had a problem installing a program and products purchased for the program.  Windows Script Host gave me the error message: cannot find engine\ script 'VBScript' Script 'C:\Users\debra\AppData\roaming\MyEQBoutique\Boutique Registry Entries.vbs.  I uninstalled the program.  I ran the SCF.  Ran the clean boot, and then set back to normal. I restored to the previous day.  I ran the scan online to remove malicious whatevers, also, I went and changed all my default settings.  Windows tells me that it is up-to-date.  I have Windows Vista Home Premium, I use Microsoft defender and Microsoft Security Essentials.  What is going on? What can I do else?

  Hello

  (1) have you made changes before the start of this issue?

  (2) have what program you tried to install?

  (3) you are able to install any other software on your computer?

  (4) what fix - it you try to run?

  This occurs if the filevbscript.dll runtime script is not properly registered in the system.

  Try the steps below and check if you are able to run the Microsoft fixit.

  a. click the Start button, type cmd. In the result of the research with the right button on cmd and select run as administrator.

  b. type cd %windir%\system 32 (Note: there is a space between the system and 32) and press ENTER.

  c. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.

  d. type regsvr32 jscript.dll in command prompt, and then press ENTER.

  If the registration was successful, you should now see the following message is displayed:

  DllRegisterServer in vbscript.dll successful.

  e. now, try to run the Microsoft fixit.

  See also:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  After the question in the following forum if the problem with fix - it persists.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

  Let us know if that helps.

• Adding host name and the name of tablespace in the alarm e-mail

  I'm trying to figure out how I can put the host name and the name of the table space in the e-mail alarms.

  Rule name: _DBO - use of Tablespace

  Scope of the rule: DBO_Cust_DBO_Cust_Tablespace_pct2 where nom_tablespace! like '% UNDO % '.

  Tried the following queries to run the query Condition and did not

  return scope.get("tablespace_name").get ("value")

  return scope.get("tablespace_name").get ("name")

  Do you have any suggestions on how to display the host name and the name of tablespace in the alarm email?

  

  Using scope: DBO_Tablespace

  hostname = scope.get('monitoredHost/name')

  tablespaceName = scope.get ('tablespace_name')

  Kind regards

  Brian Wheeldon

• LR 6 - How ignore/delete the faces similar or suggested

  After indexing my LR catalog for person/face detection, I discovered a lot of 'faces' I wasn't interested. It is useful to know that these faces are actually sub areas of your image that look like faces and are called regions of the face, even if they are not really faces. Here's how you can ignore or delete those parts of the face unwanted.

  First, recognize that when you open the view of people (library > view > o people or press), you will see two different sections. At the top is the section named people who organized some faces with the names of the people you have already named. Below that is the section of people without name, with faces yet to be named.

  Allow me to guide you on the path of people named first, because although it seems obvious, you can't delete / ignore faces in that direction. Then, click on the image of the person named in the nominees section and you will see two new sections. At the top is the section, which includes the faces confirmed images that you have already confirmed to match the name of the person. Below, you will see the similar section, which includes the faces of people who seem similar to the faces you already named. LR provides a proposed name for each face, with a question mark in waiting of your choice.  Moving your cursor over the faces, you will see a check box appears in the lower left corner. Click on this to confirm that the proposed name is correct, if it is. You can also select several images by using the Shift or Ctrl click of mouse button and then click the checkbox to confirm all the. However, expect to see a lot of faces with fake name suggestions either or faces that you are not interested. I wanted to ignore or delete those faces of this process of suggestion of name in the future, so that I don't have to see again them. Unfortunately (and unfortunately), it is impossible here to click X to delete the region of the face, although it would be logical logic.

  The only way I could figure that out should engage in the way of people without name at the top level of the hierarchy. Return to this level by clicking on the < people a link above on the left. In the section of people without name (under the section named people), you will see a series of faces with suggested names, followed by the question mark. Moving your cursor over the faces, you'll see more choices that you did on the way to above named people. On the left is the same box allowing you to confirm the suggested name. On the right, you will see a circle with a diagonal line or an X. The choice of the circle allows you to choose No, "is not [suggested name]." This is not the same as deleting actually the area of the face. Click on the circle a second time, and the x. This X gives you the choice of "delete the face region.  And, as described above, it works to use the Shift or Ctrl mouse click key to deal with the many faces of this way.

  In any case, what I learned by trial and error. I hope it works for you. And it would be great if LR developers would add the choice of X in the named people > similar section.

  Hi March,.

  Thank you for the useful information.

  Kind regards

  Tanuj

• Fuse to a distortion of the character of the unit

  Hello, my character seems to fuse and on site Mixamo, but when I download the fbx and import into the Unit 5.3, textures are torn on the fabric and you can see the modeling of teeth and eyes. I tried several different save modes .fbx, fbx (unity), on and off the animation of the face when the rigging, make 4 separate models and all have the same distortions model when I import to the unit, but when I import a character from the Mixamo store it seems perfect. What can be the problem? It is not the rigging or other settings on the unit, there must be something with Fuse (Preview).

  

  Yes it is because the mode of shader materials mixamo default transparent when imported into the unit.  Just go to each skin stitch you character in the unit and in the inspector go to the shader component.  The shader to use shader unit Standard.  Change the render Mode from transparent to Opaque for each simple mesh.  That should fix it.

  Allan

• Follies arrive outside the bottom of the face when using exaggerated face tilt force

  Hello

  I have a character here, I use for the performing arts

  When the actor too tilt things outside the face Act background starting weird here is a photo when I tilt my head and click G

  I centered everything in the center of the screen in illustrator

  I use the bomb layer to enter and exit direct

  I use the force to tilt against 250

  next to the face every thing go normal but I have to use the bomb to the outside of the face so I can use notbird to hide the bird when I want

  If I use the bomb in the back of the face like the rest of the additional layer aside, I can't click G + N
  I use to in and out

  When I use force tilting against 100 things go to almost normal

  Here is the photo

  Thanks ^_^

  

  Hi ^_^

  Want you as the bomb cloud to always appear on the character?
  No, I use a click to cycle of layers to display 'clouds' and then disappear

  A single layer is attached to the other?

  No it's a single file of great here with all the things

  just today, I discovered I can do multi puppets in an empty puppet 8)

  and I did it and it worked fine

  Thank you very much