Follow-up prevention changed to FF 49.0.2

Similar Questions

• Try to do a repair of Windows 7 installation, receive the message error "the following problems prevent upgrade Windows"

  Hi, I got problem with IE 9 RC.  I posted here, but there is no solution! (I can't send mail to Hotmail).

  I tried the final version of IE9, but the problem didn't slove. I tried to fix the Win7 + sp1 (upgarde) but it shows me this message:
  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task and then restart the upgrade to continue.
  Your current version of Windows is more recent than the version that you are trying to level to. Windows is unable to complete the upgrade.
  Windows needs to be restarted if necessary to system files can be changed before you continue.
  The upgrade of Windows will affect the following programs or devices:
  These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.
  USB Virtualization: Stub virtualization USB driver
  These programs may not work properly after the upgrade. We recommend that you uninstall these programs before upgrading. Cancel the upgrade, open Control Panel and search for "uninstall a program". (Note: programs marked as * can be reinstalled securely after the upgrade.)
  Age of Empires III
   
  and thank you.

  I tried wake SP1 with windows installation, but it did not work, I installed clean.

  Thanks to you all.

• trigger + follow level column changes

  Hi all
  
  I have some paintings
  

  CREATE TABLE emp_details
    ( emp_number NUMBER, emp_name VARCHAR2(100)
    );
  CREATE TABLE emp_address
    (
      emp_number   NUMBER,
      emp_state    VARCHAR2(100),
      emp_district VARCHAR2(100),
      emp_pin      NUMBER
    );
  CREATE TABLE emp_contact
    (
      emp_number NUMBER,
      mobile     NUMBER,
      office     NUMBER,
      email      VARCHAR2(100)
    );

  Now, I have to follow the exact changes for all tables for all columns.
  
  So I intend to make my picture of history as
  

  CREATE TABLE emp_hist
    (
      emp_number     NUMBER,
      column_changed VARCHAR2(30),
      new_value      VARCHAR2(100),
      old_value      VARCHAR2(100),
      changed_by     VARCHAR2(100),
      changed_time DATE
    ) ;

  So I intend to create the trigger on each table to fill the record in the table hisory. but I'm a little confused. In the case where multiple columns are updated simultaneously so how can I write the trigger?
  
  Any help or a better idea?

  Presumably, if several columns change, you will need to insert several lines in the history table. It is usually a bad way to follow the story. Eventually generate a so many lines that it becomes very difficult to manage and query and you can join the table to itself several times in order to understand what a particular line looks like at some point in time.

  If you are determined to follow the story in this way, you could do something like

  CREATE TRIGGER emp_addr_trg
    BEFORE UPDATE ON emp_address
    FOR EACH ROW
  BEGIN
    IF UPDATING( 'EMP_STATE' )
    THEN
      INSERT INTO emp_hist( emp_number, column_changed, new_value, old_value, changed_by, changed_time )
        VALUES( :new.emp_number, 'EMP_STATE', :new.emp_state, :old.emp_state, user, sysdate );
    END IF;
  
    IF UPDATING( 'EMP_DISTRICT' )
    THEN
      INSERT INTO emp_hist( emp_number, column_changed, new_value, old_value, changed_by, changed_time )
        VALUES( :new.emp_number, 'EMP_DISTRICT ', :new.emp_district, :old.emp_district, user, sysdate );
    END IF;
  
    IF UPDATING( 'EMP_PIN' )
    THEN
      INSERT INTO emp_hist( emp_number, column_changed, new_value, old_value, changed_by, changed_time )
        VALUES( :new.emp_number, 'EMP_PIN ', :new.emp_pin, :old.emp_pin, user, sysdate );
    END IF;
  END;
  

  He'll write a line for each column that is part of the update statement. You can add additional predicates to check to determine if the value is actually change (i.e. that the: new.column_name! =: old.column_name with proper management of NULL values if the column allows it).

  Justin

• How to prevent changing the keyboard language?

  When you use Windows 7, I have a problem where my keyboard language changes the United States to french Canada. This causes things like a '? ' to type rather like an 'E '. It seems to happen more often after the copy and paste. However, it is difficult to determine exactly when it happens, because only the punctuation seems to be different.

  What is the origin language switch? How can it be disabled or modified?
  Thank you

  Hi GrahamBleaney,

  The shortcut to switch languages is left Alt + SHIFT. It of easy to break down and can cause problems for multi users of the language. It is recommended that disable you this feature or replace it with a combination that is harder to come by chance using the available options.

  I would be grateful, if you could answer the following question.

  Do you use several languages? If you do not use the French Canadians, delete in the language mentioned below following information list.

  http://Windows.Microsoft.com/en-us/Windows7/add-or-change-an-input-language

  If you see some French Canadians, click it and click on Remove and then apply. Click on Ok.

          

  If you want to use more than one language, you can change the settings according to the following suggestions.

  Click Start > Control Panel > regional and Language Options > keyboards & languages > change keyboard > Advanced key settings > between input languages > change Key sequence.

  Change the settings accordingly.

  If you want to disable the option of language switch you can turn it off by choosing not under switch input language.

  You can also see the link below.

  http://support.Microsoft.com/kb/306560

  I hope this helps.

• How can I solve/prevent changes of fonts when downloading a PDF?

  When you download some PDF documents, the font is changed.  I tried several solutions troubleshooting, but my issue was not resolved.  What can I do to prevent this from happening, or if it does, to address the problem?

  What will work is for the author / creator of PDF to embed fonts. This requires the use of Acrobat (cannot do with the free Adobe Reader PDF Viewer).

  When a PDF file made use of fonts on your computer that the viewer PDF (Adobe Reader) is required to replace by what he hopes is a close fit.

  Be well...

• prevent changes to signed and sent the PDF form

  Hello world!

  I hope you can help me. Please excuse any poor English and also all false translations of Acrobat buttons / functions since my Acrobat is in German I don't know the correct English terms.

  [Win7, Acrobat XI]

  I created a PDF form (w / InDesign).

  "I added the 'Send form' action [Formular senden] in Acrobat by using the 'Edit form tools' then right click on the word > properties > actions.

  A user can complete and sign before you send the whole PDF for me.

  When I receive the complete PDF I see all completed the fields and signatures, BUT I can also edit all the fields of the signed PDF.

  How can I prevent the PDF form signed being changed by the receiving person?

  Thank you very much.

  Ben

  Hi ben.beispiel,

  Right-click on the signature field. Go to the tab "Signed" in the "Digital Signature Properties" dialog box. The option 'Mark read-only' as shown below:

  

  This will avoid editing the PDF file that is signed by the recipient.

  Kind regards

  Ana Maria

• Validation of DRM to prevent changes in ownership

  Hello
  
  I wonder if it is possible to have a real-time validation that prevents the user to change (some) properties for a node?
  Point is, only certain properties should be protected others don't and it must be possible to add/remove/reorganize the node in the hierarchy.
  I'm grateful for any help on this.
  
  Thank you!

  You should consider using Types of nodes, if you are trying to accomplish the restrciting Types of nodes 'some updated nodes against some properties' is an option.
  1. try to create a category of properties
  2. place all the properties that you want to avoid changes and set "READ" access for users on their
  3. create a node Type and assign properties
  4 assign the Type of node on these nodes

  Thank you
  Murali

• Copy the following code to change the search bar works always in FF29?

  This support thread contains code to change the appearance of the search bar in firefox 27: https://support.mozilla.org/en-US/questions/976166?esab=a & s = & r = 3 & as = s

  This code, this method will always work in FF29? I don't really want to 'try' without knowing it, because I don't want to mess up my firefox.

  Or, how can I find old bar back (I think to FF26)?

  I found the addon 'GlobalFindBar' to do.

• Prevent change plot-attributes executionmode

  

  Hello

  If I run a program with a graphic, I do want to be able to change the attributes of the plot (s).

  Is this possible without hiding the plotlist?

  Bravo will be given: mantongue:

  Hi Hannah,

  Yes you can do it. Use the LegDisable property of the graph and the field to true.

  

  

• The following problems prevent upgrade Windows. Cancel the upgrade, perform each task and then restart the upgrade to continue. To upgrade to Windows 7, the computer must be running Windows Vista with Service Pack 1 (SP1) or later.

  I get this message when you try to upgrade to 7!  My computer is 100% in windows update update - please help!

  Hello

  What happens when you try to install SP1/SP2.

  Read through the material in the article...

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Notify us of any errors when you try to install the service pack.

  To know if SP1 is already installed

  • Click the button start , right click on computer and then click Properties.

    Check if Service Pack 1 is listed in the Windows edition section.

    Cheeeers...

    Erwin

• Audio tracks to follow tempo changes

  Hi all

  I'm really confused about something on Garage Band for iOS. Currently using an iPad with iOS 9.3.1 Pro 12.9.

  I started a new project, captured a loop of battery from another application (Anytune Pro in this case) and trimmed the loop so I could loop it and practice on top of it.

  I changed the tempo of the project and audio followed the project tempo change in an "elastic audio" way.

  What is happening now is that I tried to do again, and audio tracks do not follow the tempo change more! I don't know what I did different, I tried to reproduce several ways, but it simply does not work...

  Here is the link for the session, you can open it in your iOS device and change the tempo and you will see that the sequence (salsa one) will match the tempo of the session.

  https://www.dropbox.com/sh/swbfnj24qbuzhmn/AABSGk-zwc1GlMqxlYTMAhQda?DL=0

  If anyone can help me and explain how to make the audio tracks to follow tempo changes, I'll be very grateful! Thank you very much!!

  Hi flaviolira123!

  I can't open your file in Garageband (latest Version).

  But I think that you can only use Apple Loops loops to automatically match the tempo.

  I tried to loop an imported audio clip (import song, trimm)- but I do not have to be matching of tempo.

  I imported a DM1 via Interapp drum - but if I change the tempo of the project, my pace is in the old tempo...

  Have you found a solution?

• How can I prevent someone change screen? __

  Hello and thank you in advance for your help! I am a primary school teacher
  who need to block the possibility of changing the wallpaper on our
  school lab computers. They are under Vista. Try as I have
  images that don't really belong in my kindergarten class could keep being
  left by older students... Please help if you can. Thank you!

  Hello

  You can prevent changes to the wallpaper with the Group Policy Editor (gpedit.msc in the Business, Ultimate, or Enterprise editions), or by adding a string to this registry key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\ActiveDesktop

  Add a DWORD "NoChangeWallpaper".

  Data value: 0 = activate the change, 1 = disable change

  Make sure that students can use the standard accounts. If they have administrator privileges, they will be able to cancel this policy. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How can I change my DEP settings to play the Sims 3?

  original title: Add-ons for Internet Explorer

  How I change my DEP?

  DEP never lets me play my Sims 3, why?

  My pc always freeze my Sims 3 game!

  I opened as administrator and after a few seconds, my game crashes!

  Origin too when I try to play here my pc locks too!

  The pc is mine, but I can't do what I want and I WANT to PLAY SIMS 3!

  Thank you for letting me want I want with my buyed pc!

  Mª Margarida L. Ramos

  Hi M.MargaridaRamos,

  1. what version of Internet Explorer is installed on the computer?
  2. what operating system is installed on the computer?

  I suggest you try the steps from the following link to change DEP (Data Execution Prevention).

  Change Data Execution Prevention settings
  http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings

  Additional information:
  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• I can't change the background

  I can't change the background on my laptop under control panel > display

  Hi Valerio Longoria,

  1. do you get an error message?

  2. you remember to make changes to the computer, after which the issue started?

  3. which edition of Windows XP is installed on the computer?

  I suggest to try the steps from the link to the following article and check to see if it helps:

  Options to change the desktop wallpaper may be missing or unavailable on a Windows XP-based computer

  You can change desktop wallpaper setting after administrator selects the option "prevent changing wallpaper" in group policy

  I hope this helps.

• Cannot delete mp4 in windows vista, even after changing the property.

  Hello

  I tried all the methods in the solution given in windows vista to remove off the mp4 files from destop. but each time, he said the necessary authorization.

  I had changed the security for the property for full control rights. but always impossible.

  can you please advice me how to do?

  Hi oscarpooh,

  This only happens with MP4 files?

  The following could prevent you from deleting the file.

  Ø if you do not have the adequate rights for a file or folder, you cannot remove it.

  O if not create you the file, you may not be able to delete it, even if it appears in the Public folder. If this is the case, you must ask the owner of the file to delete.

  O in addition, you cannot remove a file (or the folder that contains it) if the file is currently open in a program. Make sure that the file is not open in any program, and then try again to delete the file.

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  I suggest you try the following steps:

  Ensure that you do not play the file when you try to remove it.

   

  Step 1: Start the computer in safe mode and then try to remove

  Start the computer in safe mode, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: The corruption of the file system prevents access to the file

   

  You will not be able to delete the file if the file system is damaged. To resolve this problem, run the Chkdsk utility on the disk volume to correct any errors.

  Run the disk check to repair bad sectors on the hard disk.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

   Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.