Prevent change plot-attributes executionmode

Similar Questions

• Change the attributes of the camera with a .ini file

  Hello.

  I would change some attributes of camera through an INI file, before you run the User Interface.

  The problem is that when I view the values of the modified attributes, they are not changed: it's always the same values as in the case of camera NIMAX.

  In fact, I've logged IMAQdx with IMAQdxOpenCamera, then I loaded the Camera.ini value for the attributes of the camera, and finally, I closed the session with IMAQdxCloseCamera.

  I can't wait to see your ideas!

  Thomas1330

  Hello

  in fact, I solved the problem.

  I used the following function: IMAQdxReadAttribute (session id, ini_pathname)--> only the attributes in the .ini are changed in the file of the camera until I close my program

  Thomas1330

• WinXP PRO, the recovery console, could not change an attribute

  Hello, I installed the recovery console, and so far I just used it to run chkdsk. Today, I tried to change the attribute on a read only file. I typed attrib - r h mitchell. I kept getting a msg saying that the settings were wrong. I checked attrib /? and he followed correctly, I thought. I am running winxp pro svc pk 3, ie8. Thanks in advance for any help.

  Good for you.

  Someday, you'll be glad you did.

  Mitchell, is a file or a folder?

  In the Recovery Console, you do not have access to each file and folder on your system.  You cannot in all cases - this isn't how the Recovery Console.

  You can read this article:

  http://support.Microsoft.com/kb/314058

  The Recovery Console is the recovery so that he knows only about some things - do not change the attributes on files and folders.

  There are some other bootable CD, you can use for this.

  If you have some kind of issues or problems and need some ideas, trying to better describe what you try to do it and someone can help.

  They are taunting on this other thread needing a response... Although I got to me 23 SE other than "answers" today that match the requirements.

  This is the answer the day.

• How can I change the attributes read-only or system files?

  How can I change the attributes read-only or system files?

  To view or to remove the read-only or system attributes, use the Attrib command at a command prompt:

  1. click the Start button, type cmd in the search box and press ENTER.

  2. to view the syntax for the Attrib command, Type attrib------? at the command prompt.

  WARNING: If you remove the read-only or a file system attribute, it may seem like a regular folder and some customizations may be lost. For example, Windows customizes the Fonts folder and provides a special folder view that allows you to hide variations, such as bold and italics. It also allows you to change the display settings of the file in a way that is specific to fonts. If you remove the read-only attributes and the Fonts folder system, these custom display settings not available. For folders that you have customized by using the tab, customize the folder properties dialog box, the folder icon and other other customizations may be lost when you remove the read-only attribute.

  If a program cannot save files to a folder with read-only, such as My Documents, change the read-only to the system attribute by using the Attrib command at a command prompt.

  To remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------.

  For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command: attrib - r + s c:\test

  Be aware that some programs may not work correctly with folders for which the read-only attribute and the system attribute are granted. You can use the following command to remove these attributes:

  attrib - r-s c:\test

• You will need to provide administrator permission to change these attributes

  I am an administrator, I'm doing a completely read/write folder, but I get "you need give the administrator permission to change these attributes.

  The folder is c:\program files\ and then some void / folders for a Microsoft product.

  I have "Everyone" in the security with total control tab and it still does not work.

  I need to make the file read/write

  Thank you

  You have to disable UAC (User Access Control) temporarily to that of such changes. Then, you may find that the changes do not affect the access to these folders because access is controlled by the UAC. Have a look here for more details on UAC: http://support.microsoft.com/kb/951016/

• When I try to change the interactive report columns, then triggers the error: "unable to change column attributes. "ORA-01403: no data found. Pls tell me why?

  When I try to change the interactive report columns, then triggers the error: "unable to change column attributes. "ORA-01403: no data found. Pls tell me why?

  You use listener EA3 ADR?

• CF9/10: Change file attributes

  Hello, everyone,

  Is there a way to change the attributes of a .txt file that already exists?

  For example: I use CFFILE to write a .txt file, which is empty and provide the attribute "read only".  Later, I want to dynamically add data to the file.  How can I configure the .txt to readOnly file NOT so I can add data?  And, conversely, how to set the return read-only attribute?

  V/r,

  ^_^

  Here is an example on Windows, using 3 steps:

  Fact!

• Flex 3 - How to change an attribute name?

  Like this

  < article number = "1" / >

  TO

  < feature id = "1" / >

  Thank you

  Hi Alex,

  You can use setName to change the attribute name:

  Here, for example change all your id with the code attributes:

  var xmlTest:XML =;

  for each (var node: XML in xmlTest.item.descendants ("@id"))
  node.setName ('code');

  trace (xmlTest);

  Thank you

  Jean Claude

• Change the attributes of resources in GR 11, 2 ASM grid Infrastructure

  Hello
  
  I have two or three never starts automatic start-up located in the crs profile 11 GR 2, can I change the profile of resources to auto_start = always while the cluster is running? or fact cluster will display the parameter ASM_DISKGROUP starts listed of spfile?
  
  Thank you

  Hello

  user9097501 wrote:
  Hello

  I have two or three will never start Autostart located in the crs profile GR 11, 2...

  Let us clarify which component has effect on what it:
  1 profiles/resources src have nothing to do with the ASM starts
  2 auto_start is a resource of src attribute that specifies if the clusterware automatically starts the resource in question after the restart of the cluster server.
  3. the list of parameters init ASM_DISKGROUP names of disk groups that the ASM instance goes up at startup.

  I can change the profile of resources to auto_start = always while the cluster is running?

  You can change the attribute auto_start to the value 'always' online, no downtime is required.

  or fact cluster will display the parameter ASM_DISKGROUP starts listed of spfile?

  No, not this connection between the CBC and the ASM instance. Crs begins the only DSO resource (using the script specified in the resource action_script attribute) and groups of disks listed in the ASM_DISGROUP parameter, will be mounted by the instance ASM itself.

  HTH.
  Kind regards
  József

  Published by: Jozsef on October 21, 2010 21:43

• Change the attribute to read-only by using ClientListener?

  Hello friends of the forum...
  
  I created a form with two INPUTTEXT and put them with read-ONLY using an EL made reference to a BEAN called GENERAL Manager
  
  < af:panelFormLayout binding = "#{backingBeanScope.backing_Layout2.panelFormLayout1}" id = "panelFormLayout1" > "
  < af:inputText value = "#{bindings." Modulo.inputValue}"binding =" #{backingBeanScope.backing_Layout2.inputText1} "id ="inputText1"* readOnly =" #{General.BLock} "* / >"
  < af:inputText value = "#{bindings." Proceso.inputValue}"binding =" #{backingBeanScope.backing_Layout2.inputText2} "id ="inputText2"* readOnly =" #{General.BLock} "* / >"
  * < af:clientListener type = "dblClick" method = "activate the" / > *.
  * < af:serverListener type = "activate the" method="#{backingBeanScope.backing_Layout2.activarBloque}"/ > *.
  < / af:panelFormLayout >
  
  
  ClientListener calling Javascript Fucntion:
  
  function Activar (event) {}
  AdfCustomEvent.queue (event.getSource (), "Activar", {operation: "Create"}, false);
  }
  
  
  ServerListener call the method to change the attribute Block of GENERAL bean and also try to update panelFormLayout...
  
  {} public void activarBloque (ClientEvent clientEvent)
  * General.Block = false; *
  General.Operacion = clientEvent.getParameters ().get("operacion").toString ();
  * AdfFacesContext.getCurrentInstance () .addPartialTarget (this.getPanelFormLayout1 ()); *
  }
  
  (the block is static attribute)
  
  After I do dbClick I see general.block change its value to false but inputText don't update!...
  
  
  So, how can I force it to refresh the components when actionListener is trigger?

  Hello

  I think that in this case, you must call

  AdfPage.PAGE.addPartialTargets ()

  in JavaScript

  Frank

• How to programmatically change the attribute of af:message.for?

  < p >
  I would like to know how, if possible, dynamically change the attribute 'for' of the af: message in the code for the validator in my grain of support. In my example below, I would like to change the af: message for the 'txtReportNumber' attribute 'txtCaratWeight '.
  
  I have included an excerpt from the next page
  & lt; AF:panelGroup binding = "#{backing_ReportVerificationCriteria4.panelGroup2} '"
  ID = "panelGroup2" layout = "vertical".
  styleClass = "body_text15" & gt;
  < /p >
  < p >
  & lt; < color = "#ff0000" > af:message < / police > binding = "#{backing_ReportVerificationCriteria4.message1} '"
  ID = "message1", color = "#ff0000" > for = "txtReportNumber".
  < / police > inlineStyle = "font family: Gil without, Verdana, Arial, Helvetica, without serif;" do-size: 15px; color: #FFFF00; make-weight: bold; left margin: 0px; Max-width: 300px; line-height: 5px; < br / >
  messageType = "none" / & gt; < br / >
  & lt; AF:objectSpacer width = "10" height = "10" < br / >
  Binding = "#{backing_ReportVerificationCriteria4.objectSpacer1}" < br / >
  ID = "objectSpacer1" / & gt; < br / >
  & lt; / af:panelGroup & gt; < br / >
  & lt; AF:panelGroup binding = "#{backing_ReportVerificationCriteria4.panelGroup3}" < br / >
  ID = "panelGroup3" layout = "horizontal" < br / >
  inlineStyle = "font family: Gil without, Verdana, Arial, Helvetica, without serif;" do-size: 11px; color: #052149; margin left: 15px; line-height: 14px; "& gt; < br / >
  & lt; AF:outputLabel value = "number of statement:" < br / >
  Binding = "#{backing_ReportVerificationCriteria4.outputLabel5}" < br / >
  ID = "outputLabel5" < br / >
  inlineStyle = "do-family: Gil without Verdana Arial Helvetica without serif;" font-size: 11.0px; Color:RGB (5,33,73); line-height: 14.0px; "/ & gt; < br / >
  & lt; AF:inputText label = "number of statement:" < br / >
  Binding = "#{backing_ReportVerificationCriteria4.txtReportNumber}" < br / >
  < color = "#ff0000" > id = "" txtReportNumber < / police > ' columns = "20" simple = "true" < br / > "
  inlineStyle = "do-family: Gil without Verdana Arial Helvetica without serif;" font-size: 11.0px; Color:RGB (5,33,73); line-height: 14.0px; "< br / >
  showRequired = 'false' immediate = "false" < br / >
  Validator = "#{backing_ReportVerificationCriteria4.txtReportNumber_validator}" < br / >
  requiredMessageDetail = 'Both report number and Carat weights are necessary.' < br / >
  required = "true" / & gt; < br / >
  & lt; / af:panelGroup & gt; < br / >
  & lt; AF:panelGroup binding = "#{backing_ReportVerificationCriteria4.panelGroup4}" < br / >
  ID = "panelGroup4" < br / >
  inlineStyle = "font family: Gil without, Verdana, Arial, Helvetica, without serif;" do-size: 11px; color: #052149; margin left: 15px; line-height: 14px; "< br / >
  page = "horizontal" & gt; < br / >
  & lt; AF:outputLabel value = "Carat weight: ' < br / >" "
  Binding = "#{backing_ReportVerificationCriteria4.outputLabel6}" < br / >
  ID = "outputLabel6" < br / >
  inlineStyle = "do-family: Gil without Verdana Arial Helvetica without serif;" font-size: 11.0px; Color:RGB (5,33,73); line-height: 14.0px; "/ & gt; < br / >
  & lt; AF:inputText label = "Carat weight:" < br / >
  Binding = "#{backing_ReportVerificationCriteria4.txtCaratWeight}" < br / >
  < color = "#ff0000" > id = "" txtCaratWeight < / police > ' columns = "20" simple = "true" < br / > "
  inlineStyle = "do-family: Gil without Verdana Arial Helvetica without serif;" font-size: 11.0px; Color:RGB (5,33,73); line-height: 14.0px; margin-left: 7.0pt; "< br / >
  Validator = "#{backing_ReportVerificationCriteria4.txtCaratWeight_validator}" / & gt; "" < br / >
  & lt; / af:panelGroup & gt; < br / >
  < /p >

  Hello

  the field 'for' supports the El. So you can use a reference of bean managed to replace the value

  Frank

• Change the attributes of file of 'AT' to 'A '.

  

  Most of my photo and document files have an attribute 'A', which I believe means 'archived '. Some, however, have an attribute "AT". Does this mean "archived temporary? I have searched and cannot find a description of what means the file attribute "AT".

  More important still, when I do a search by name (partial or total) for all of the files AT using Windows Explorer (WE), they are not identified (doing the same type of search for 'A' files works well). Why do WE not seek 'see' FILES? Now I know why I can't find sometimes some files with US, even though I know they are there - I can open them, copy, etc. In addition, my data backup program is not backup files AT (maybe WE're dependent?).

  Here is another weird thing about WE search function: it won't identify the FILES in the folders on my C drive, but will identify them on my external hard drive so I copy and paste here. Why WE search for files with an attribute AT does not work on the external, but not on the C drive D drive?

  Finally, is there a way to 1) in the world, replace files with an attribute AT to have an attribute A rather? And (2) change the search WE work so he can identify files by name even if they have an attribute AT?

  Thanks in advance.

  OK, after several decades of DOS/Windows use, I found a whole new world on extended attributes. Here are a few links that explain their:

  https://jpsoft.com/help/FileAttr.htm
  https://jpsoft.com/help/attrib.htm
  https://jpsoft.com/help/attrswitch.htm
  http://social.technet.Microsoft.com/wiki/contents/articles/406.DFSR-does-not-replicate-temporary-files.aspx
  http://blogs.msdn.com/b/larryosterman/Archive/2004/04/19/116084.aspx

  The T attribute: 'temporary' and is used by browsers. You would need a PowerShell command to reset. Since I never use the search function of Windows Explorer, I don't know how it affects the temporary attribute.

• Follow-up prevention changed to FF 49.0.2

  Despite what the help/support pages say, it is impossible to turn off the tracking of prevention for all sites at all times in Firefox 49.0.2

  For example, many pages fail to be rendered correctly often with missing images.

  It is a case of throwing the baby out with the bath water. As a user, I reserve the right to set things. As Mozilla doesn't let me, I have no choice but to go back to Chrome. Good bye.

  You cannot change the setting? Or change them back?

• Change the attributes of Certificate SSL CUCM

  How can I change the values of attributes that CUCM uses to create self-signed certificates or CSR?  I am referring to the configured settings when CUCM is installed, as an organization, State, country, etc.

  Thanks, Mike

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/cli_ref/10_0_1/C...

• Change an attribute value in a table of the tree at all levels using the control button.

  Hi all

  I use JDeveloper Version 11.1.1.7.0.

  I have set up on my Table from the tree only when selected in the parent level also chooses the checkbox on the levels of the child associated with a checkbox, see my below base schema.

  My method to achieve this was to follow this guide... Andrejus Baranovskis Blog: box support in ADF tree Table different levels

  1. [Checkbox] status. Name | Employee ID

  -> 2 status [Checkbox] | Name | Employee ID | etc. | etc.

  -> 3 status [Checkbox] | Name | Employee ID | etc. | etc. | etc.

  What I want to do now, is once the box is checked at the parent level and all child nodes checkboxes are also selected, is on pressure of a command button, the value of my 'Status' column has changed through all the levels where the check box is checked.

  The default of my column 'State' is 'untrusted', it should be replaced by "Approved" once the Parent level checkbox is checked (which causes the child nodes also be checked) and you press a command button.

  I searched for some pointers on how to do so for some time,

  I was trying to think of a way to use the attribute of checkboxes that is a Boolean data type, there may be a way to create a method that checks if the Boolean attribute = true and where is the value of the Status column should be changed, the problem is to make it through all three levels of the table from the tree. But I can't understand it, any help would be greatly appreciated.

  Thank you

  Kind regards

  Jamie.

  Hi Jamie,

  I guess that you can apply the same idea that you used to update the Boolean attribute box of your iterator. This time you need to do is to iterate exactly same way but update the Status attribute. Have you tried to do this? So while the first course you'll hand over your boolean, check and update status accordingly.

  What keeps you from doing this?

  Concerning