Fonts folder has no Option "install new font".

Similar Questions

• The option 'Install new font' missing from the file menu.

  I did a "search forum" and has not found the solution to my problem, so I apologize if it's here somewhere under a different title. I looked on the microsoft site itself, as well as Google search. Here's my problem:

  I am trying to install a new font, but do not have the option in the file menu of police record. It's just not there. I am running Windows 7.

  Thanks for any help you can give!

  Brandi

  Too bad! I googled some more and found my answer.

  For those who overlook the obvious like me, once you download a new font, open it, and there is a button 'install new font' just there. Yay!

• Printer HP Deskjet 3050 has prayer after installing new cartridge HP

  After replacing the black cartridge the wrong printer aligns the chops from the top of the page and forget the lines print. I tried all the recommended soplutions. Even the alignment page has half of it missing, so is not recognized by the printer. Even if printing from my computer or just copy. Is there a way to reset top factory of the printer page and start again?

  Hi DavidAH,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3050 went wrong aligns the chops from the top of the page and missing print lines.

  I recommend the following guides:

  1.) "alignment Failed" Error Message displays on the all-in-one.

  2.) Troubleshooting print quality problems.

  3.) reset of the printer.

  Hope this information helps and have a nice day.

• During the installation of the fonts - install new font option is missing.

  Original title: cannot INSTALL a NEW FONT

  I need to install a rupee font on my computer with windows xp professional with service pack 2, when I go to START > CONTROL PANNEL > folder FONTS, and click FILE > NEW I can't see 'INSTALL NEW FONT' option, instead, I see all the menu options we get when we do a right-click on the desktop or the folder I also tried to copy the file Rupee.TTf into the C:\WINDOWS\FONTS FOLDER, but it also did not work

  Help me pleeezzzzzzzzzzzzzzz

  Thank you

  Hello
   
   
  To restore the correct commands for the fonts folder, follow these steps:
  a. Click Start and type cmd.exe in the run and press ENTER.
  b. at a command prompt, switch to the Windows folder by typing the following command:
  cd\windows
  NOTE: If Windows is installed in a different folder in the Windows folder, adjust these instructions accordingly.
  c. type the following command and press ENTER:
  attrib + s + r fonts
  d. stop and restart Windows.
   
  After restarting the computer, try to install the police. See the article below for more information.
  How to install or remove a font in Windows
  http://support.Microsoft.com/kb/314960
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not install new fonts on Windows 7

  I can't install new fonts on my computer (Win7).  I've downloaded from the web in my "Downloads" folder, but I can't find a way to get them in the Fonts folder.

  Yes, I did.  But when I right click on the police in my downloads folder, I get no opportunity to 'Install' - so what do I do?

  Right-click the policy and select Properties

  On the general tab, click on unlock

  You could also try to drag / drop the police in Control Panel > Fonts folder

  http://www.SevenForums.com/tutorials/1155-fonts-install.html

• CC & fonts pre-installed applications has not been installed

  We just signed up for a subscription to creative cloud. I installed ID, PS, IT and the base font has not been installed. How can I get the CS6 basic fonts to install for my applications?

  This thread should be of great help cc2545.

  http://forums.Adobe.com/message/4544744

  LP

• Do a right click to create a new folder has stopped working

  Do right click to create a new folder has stopped working and displays 'empty' in the dialog box or displays "new portfolio." And the selection of the 'new folder' icon does not work. This will require rehabilitation at a previous time where everything worked and will that reset cause the loss of data and require reinstallation of all programs installed since the right click new-folder creation function stopped?

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

   

   

  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf

   

• Running Adobe cs5 on my desktop and laptop. The desktop hard drive has failed. A new hard drive was installed. I reinstalled Adobe cs5, but I can't update.

  Running Adobe cs5 on my desktop and laptop. The desktop hard drive has failed. A new hard drive was installed. I reinstalled Adobe cs5, but I can't update.

  Try direct updates

  https://www.Adobe.com/downloads/updates/

• Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW using this file, so any CSS

  Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW with the help of this file, so all CSS should be there, but I don't see on the page about the elements without formatting, any stop to the left. Thank you!

  PS: Muse will be the most impressive program ever when they fix these bugs or drop because not every user will be paying through the nose for Business Catalyst. Grrrrrrrrr.

  Best approach would be not to use the PayPal widget and instead copy and paste the PayPal code embedded in an object > object to insert the HTML in Muse. This way you can edit the HTML code to embed PayPal code from Muse and without having to modify the exported code.

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• Install ColdFusion new 11 - The ODBC ColdFusion Server service is not running or has not been installed.

  I installed the developer on my machine and the message edition, "ColdFusion ODBC Server service is not running or has not been installed." when you try to add an ODBC data source in the ColdFusion administrator. " I've used ColdFusion 8 with no problem at all adding ODBC data sources. I uninstalled ColdFusion 8 before installing ColdFusion 11.

  Yes, the solution is in the testing phase. We will share the fix soon.

  Kind regards

  Anit Kumar

• This application has not been installed 0x80073cf9 error

  I have the same problem. I can not install any app on the Store, still have the same error: «this application has not been installed...» ", and then point to the error code"0x80073cf9 ". I see that a lot of people have the same problem. It looks like a bug in the new Windows 8. I have Windows 8 Pro. I just installed yesterday.

  I'd appreciate any help.

  Hello

  Look if the 'AUInstallAgent' file is missing from the windows folder. If this is the case, you will need to create a new folder, rename it to "AUInstallAgent" and restart your pc.

  Thank you post from BJArmstrong on October 22, 2013

  I wanted just to update this option to add that I had the same problem in Windows 8.1 and the solution was to create the 'C:\Windows\AppReadiness' directory which apparently replaces the directory 'AUInstallAgent' of Windows 8.

  Why the Bank cannot simply create the directory if it lacks a true mystery...

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.

• Games folder has stopped working all of a sudden

  Hello...

  My folder of the game has stopped working for some reason any. I mean, it was working perfectly and suddenly, all my games disappeared.

  Problems:

  1. cannot drag ANY game in the folder to create even the simplest links;

  2. no game seems to go in the Games folder of all after installing it. Only Fallout 3, but that too after it write manually using the command prompt. Will not work with other coz' I don't really know for others;

  3. even after manual registry entires, only some will appear and that too, just an icon without any kind of information. The icon is too very bad quality. Most of these managers to game such that VGEE won't even pick up one of these games;

  4. it seems to be two registry entries. Is this normal? PIC is here:

  http://img715.imageshack.us/img715/7509/capturebf.PNG

  The files, btw, will be visible only if I add games in the top folder.

  -----

  I have already tried to disable and reactivate the control panel Games folder, have tried to create a new registry entries, tried to delete a user and create a new, tried to use software like VGEE, tried to remove the registry entries and start fresh, tried the thing 'show all files' and other things that I remember.

  What should do? How to create links in the folder?

  And please don't say pc format, coz I have over 60 games, averaged around 6 GB, larger be up to 14 GB, which I'll have to download it again and loads of other software too, some have no CD or digital download copy or such. Received more than 1 TB of files, it would be really a copy/paste of pain.

  Is the folder of games btw: http://img32.imageshack.us/img32/6810/capturecl.PNG

  Hi Devil12911,

  Restore the system to the date it was working fine. Link below will help you to complete the restore of the system:http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

  I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

  Hi ctgreen

  Welcome to the Microsoft Answers site!

  You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

  Method 1: Start the computer in last good known Configuration

   

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock , then click on restart.

  1. Do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
  2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: Start your computer in Mode safe

   

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click on the Start button , click the arrow next to the lock button , and then click restart.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.