Footage speed up corresponding with Audio!

Similar Questions

• How to reconnect the footage on the timeline with deleated track: audio or Visual?

  If I delete an audio track, then open the source I have a hard time finding a way to link the audio in sequences with reset them the points of entry and in the source bin file, I have several cuts camera roll and when to open the source file - can't seem to use the points for selected editing the thing out I'll try to get back with audio and with to set the points again and again the mounting (long sentence right?)? tried searching for an answer, landed here... J

  I'm not sure what you mean, but for re - insert either video or audio clip in the timeline panel is easy.

  1. Park the playhead on the clip in the timeline panel

  2. make sure that the track selector box is highlighted.

  3. press on 'X' to select the item.

  4. press on 'F' for match frame.

  At this point your video should appear in the monitor source with in and out already defined.

• How to frame with audio stage?

  Hello

  I'm new to PP CS6 and I can't seem to find how I frame with audio stage. When I move

  image with audio is cut but rub well at high speed and in real time. Ideas of

  How to activate the frame walk audio option on?

  See you soon. Keiran

  Check your preferences and make sure that the tab audio, you have "Play Audio while Scrubbing" checked.

  I can use the arrow keys on a PC to rub and hear the sound. When I zoom way and see the audio waveforms, it seems to be pretty accurate.

• can I increase my speed of wifi with settings

  Hello... I would like to know if I can increase my speed of wifi with adjustments on my computer, all parameters that would adjust my speed with my adapter BT MCard HP WLAN 802.11 b/g/n 1 x 1, thank you...

  customized HP ENVY Phoenix 245 810qe desktop PC

  Hello

  10 ten reasons why your WIFI stinks.

  11 adapter of defective material

  Your best chances for a fast WIFI connection is to use the 'AC '.  This requires that the adapter and the WIFI router two supported 'AC '.

• I created a 'film' in Windows Movie Maker with audio. I'm now trying to burn on a DVD in windows DVD creation, but the program will change the order of my photos. What I am doing wrong?

  I took pictures of a Picasa folder and created a "slideshow" with audio in Windows Movie Maker. It's over, but when I try and save it to a dvd using windows DVD create, change the order of my photos are randomly. Am I missing a setting? What I am doing wrong?

  It may be interesting to try to publish (Save) project in the. Film WMV
  format in a folder on your hard drive. Then import them. WMV file in
  Creating Windows DVD.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

• Problem with audio on laptop Toshiba Satellite C855D-S5232.

  .. .lately I had ALL sorts of probs with audio... first helmet to quit smoking, has no longer recognized and now external speakers work not and embedded speakers continue to play static. Can you help me?

  Download and install the latest driver 'Sound' on the Toshiba support site:

  http://support.Toshiba.com/support/modelHome?FREETEXT=3386622

  J W Stuart: http://www.pagestart.com

• SX20. HDMI with audio and video?

  Hello.
  I have to integrate a SX20 codec with Extron HDMI matrix as the main source of video + audio.
  The main HDMI input, support with audio video integrated?

  Thank you.

  Luis

  We use the scalers Extron (DVS-605) to power the video (from several cameras in a provision of PiP) in our SX20s - however, we feed the audio through the mic connector.

  We have not tried audio HDMI at all.  The cards say it should work, but there is another discussion (ie the SX20 - Audio HDMI camera) where he says it's a bug with the documentation (CSCuh72577).

  The TC7 Administrator's Guide (Page 61) says that the HDMI Audio works that when using a camera with a built-in microphone Cisco, and, if you use any other device, the HDMI audio input will be disabled little matter however, you set the end point.

  The CE8.0.x software has removed the option "Audio input HDMI Mode" completely (Page 8 of CE8 Administrator's Guide).

  In short, I don't think you'll have some luck with your Extron HDMI audio, so you'll have to do as we did and feed your audio in via the microphone or the content entered.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• WMP 12 does not open. WMC comes with audio error.

  Clicking on WMP 12 - does not open. WMC opens but comes with audio error when trying to access the music library. Impossible to sync/play any music or dvd. Tried to turn the features off & restart between - no improvement. audio works with everything else on the machine & drivers are up-to-date. Tried everything to reinstall the whole machine from scratch & no improvement - get pretty sick of it! Any ideas?

  Hello

  Thanks for the reply.

  For Windows Media Player:
  You can run this Fixit.
   
   
  For Windows Media Center:
  You can run this Fixit. (It works for Windows 7).
   
  I hope that helps!
   
  Let us know the result.

• New in After Effects 13.8.1 - with audio shape layers!

  

  I just wanted to share a little funny bug. the shape layer has no audio effect applied, and he still has an audio setting. It don't bother me much, although the last thing I need when I'm manipulating shape layers is another rocking to watch in the timeline panel

  Here are the steps to reproduce the problem in my current workstation:

  1 import audio into your composition - in my example, it was the WAV format. but you can add a solid layer with audio tone effect.

  

  2. put within a publication

  

  3 pre model the master model (no matter if it's a holiday attributes or move attributes) and get inside the demo

  

  4. Add a shape layer

  

  Here is my current workstation card:

  

  

  This happens once I reset my preferences. Please share if you encounter this bug too.

  Roei, thank YOU.

  We have received reports from several users on another problem, which we have not been able to reproduce: by clicking on the layer switches (solo, lock, motion blur, etc.) sometimes unnecessarily vortices open the properties of a layer.

  It turns out that this problem is related to what you just posted on the redundant audio properties. The problem of the twirling property only occurs on these same layers.

  The bug occurs when you work in a model that has been composed before and this model contains a layer with audio, when you add a new layer to this model (any type of layer except the cameras or lights), if this layer should not have audio it will win the audio properties in any case. When you click on a layer switch (for example, solo, lock, a blur of movement, etc.) these layers with redundant audio properties will be automatically twirl open their properties.

  This bug started After Effects 13.8.0. There are still in 13.8.1. I have described it in our bugs database and ask so that it can be fixed in our next release.

  The twirling of the property problem can't for layers that have real audio. for example, with audio images, or a solid with the effect of the tone. This does not happen for the layers without audio created before the bug conditions occur (computer pre composed containing a layer with audio).

  I found a few solutions workaround for this problem.

  The simplest solution is to add the effect of audio signal to the affected layers and then disable audio (the switch icon small speaker) for these layers. The problem only occurs on the layers that have no audio, so the addition and then cut audio takes layers on the bad state.

  There is another, more cumbersome workaround that effectively eliminates the redundant audio properties:

  1. In the model problem, select all the layers having audio.
  2. Remove (temporarily, it gets canceled at step 5) these layers.
  3. Select all the remaining layers (or at least those with the redundant audio properties).
  4. Activate a switch layer for all selected layers, such as Solo or lock. Redundant audio properties will disappear.
  5. Cancel twice: once to cancel the toggling the layer switch and a 2nd time to undo the deletion of step 2.

  Redundant audio properties won't return after the cancellation. Unfortunately, this only solves the problem for existing layers. Adding new layers will still get the attached redundant audio properties.

  In any case, my thanks to you once again, Yang, to post the steps to repro the problem. That's the key for me to discover the cause of the problem, much more annoying.

• Importing video files WITHOUT audio track despite the source with audio

  Sigh. Back with another ridiculous question with Adobe CC do my job nearly impossible.

  Running Adobe first Pro CC 2015 9.2.0 (41) build on a brand new macbook pro 2015 provided by my work.

  When I start a new project, I will import my clips and if I add them to the timeline immediately they will import with their audio very well and everything will work. After about 10 minutes of work on the project, however, no matter what video file with an audio track that I drag in my calendar won't matter is no longer with an audio track, DESPITE the fact that the file was related, audio compatible and if I open the clip in the source cutting machine there will be sound. If I try to cut and import the clip of it the clip still will not have audio when importing to the timeline. It's infuriating! I recorded a gif of the question:

  

  Any ideas at all? My only option is to save the project, open a new one, clips import it immediately with audio, copy it to my Clipboard, reopen the real project and stick!

  Its all in the correction of the source.

  

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Its mixed? While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds will play together. How to avoid what is happening?

  While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds play together, which is not a good customer experience.

  How to avoid what is happening? Placing a marker can help, but cannot solve the problem when the compliant/no intentional user, press tab.

  
  

  Better, if the presenter can triggle tab automatically at some point, or click interaction, no game bar function.

  Hi Louie,

  My sincere apologies for not being able to help on your previous question.

  Now, that the Interactions are concerned, they were initially designed to be placed as standalone content on the slide.

  Also if you try to resize your interaction and place it on the slide as well as other content/objects released published will always give a priority to the Interaction that it deemed to be a specific slide of Interaction.

  In the previous project, you shared, you try to time the Interaction with PowerPoint animations and wanted it to appear later on the set of slides, rather than on the start. But, as explained above, presenter honored not this setting in your project, because he in fact has considered a slide of interaction and display interaction since the beginning of the slide room itself.

  Also the number listed in this thread is concerned, there is no direct way to do it but I would like to suggest something that might help.

  If you want to keep the interaction on your slide and other content, Interaction will be available at the beginning of the slide. Surely there is no way that delaying his appearance, but you can still use animation related to Interaction in another goal. Within your presentation-> playback option settings, you can enable the feature of 'Pause after each animation' (see screenshot below). It will essentially help you achieve the function of auto-faisant a break from your animations, using your narration would automatically stop, just before you claim in your narrative and inform the learner to click on the different tabs of the Interaction. All you have to do is your narration and animation correctly so that the slide play does not break too many times in the time interval. Hope you find the idea of what I'm trying to say.

  

  Please mark this answer as being correct, if you find it useful. We would certainly look at such scenarios to be achievable directly at the request of our updates and later version.

  Thank you

  Zeeshan Hussain

  Adobe Presenter Engineering Team

• Problems with audio CDs, burning on Windows 7 with VMWorkstation 9

  I can not burn audio files with my current setup using VMWare 9.0.2

  The host OS is Windows 7 (x 64) and the guest operating system is Windows 7 (x 64). On the host, I can create audio CDs using Windows Media Player or Nero 9 Essentials.  When I try the same operation on the client, both programs cannot write to the audio CD.  The host drive is a SATA Blu - ray burner.  I connected it to the virtual computer as a SCSI disk using these settings and Legacy Emulation is turned off:

  SCSI1.pciSlotNumber = "224".

  SCSI1.sasWWID = "50 05 05 6 d 66 52 4 b 50.

  SCSI1. Present = 'TRUE '.

  SCSI1.virtualDev = "lsisas1068".

  SCSI1:0. Present = 'TRUE '.

  SCSI1:0. FileName = "G:".

  SCSI1:0. DeviceType = "cdrom-raw"

  I tried writing files of data of the virtual machine on a CD in the drive to Blu - ray in the host using either Nero 9 Essentials or directly with Windows 7 and do drag characteristic and files data write and verify correctly in the virtual machine.

  As a test, I borrowed a USB DVD drive and plugged directly into the running virtual machine.  After Windows 7 it is detected in the virtual machine, I tried Windows Media Player and Nero 9 Essentials to burn audio CDs from the prompt and it has worked.

  What should I do for the virtual machine to make it work with the internal drive to the SATA controller when creating audio CD?

  This is certainly a bug with Audio CD burning.

  I have re-installed Workstation 7 and 8 of the workstation and verified that the problem did not exist in older versions.

  I tested with 9 Workstation, workstation 10.0.1 and fails audio CD burning.

  This was reported as a VMWare bug (13403576911 application) to build 10.0.1 and although it might not be replicated at VMWare, they have managed to fix the problem and I confirmed the fix works on my hardware.  The fix should be in the next update of VMWorkstation which I guess will be 10.0.2

• Problem with audio samples

  Hello

  I made a website with Muse a year ago for a pianist with audio samples that worked for a while, but no more, as you can see here.

  I don't know why since I won't change anything. How can I download new audio files? Where can I find a plug-in? Muse like widgets for video but not audio files...
  Thank you

  Loïc

  Hello

  I checked out the site with complete documentation assets is missing. Then you can try these two things.

  1. connect to the administration panel, go to the Site Manager-> file manager. Create a new folder with the same name, download the files one by one.

  2. create a folder on your desktop and allows you to transfer the folder on the ftp server. To see how works the FTP, check this article

  Catalyst for help | Connect to your site using SFTP

  Let me know if you have any question.

• Export 6 channel discreet mono tracks (5.1 mix) I have only 2 tracks with audio compressed and 4 empty trace on my exit.

  Export 6 channel discreet mono tracks (5.1 mix) I have only 2 tracks with audio compressed and 4 empty trace on my exit. I use first Pro CC14, pasted below export settings and sequence settings.  Please help export feature for iTunes version trailer next week.  Ouch!

  

  So, I'm bad to think 5.1 sequence option is what you wanted. I'm sorry. You want to separate the 6 channels. Then with your initial configuration, your Audio Track mixing table appears as the posted screenshot?