For a Linux virtual () if I have two network cards

Similar Questions

• How can I get the six digit code for my iPad Pro? I have two other iPads and an iPod but I enter the codes I get and the Pro is just off!

  How can I get the six digit code for my iPad Pro? I have two other iPads and an iPod but I get the codes I get and the Pro is just disabled for longer and longer whenever he rejects these codes!

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

  If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

  Hi cliffwho

  You can fill with connections to the LAN. However I recommend you read this first to understand what it is that you do. I hope this helps.
  http://TechNet.Microsoft.com/en-us/library/bb457038.aspx

• If I have a monthly license for CC to Photoshop, but I have two computers, can I use photoshop on both of my PC?

  If I have a monthly license for CC to Photoshop, but I have two computers, can I use Photoshop on both of my PC?

  Hi Zsolt.Jancsik,

  Yes, you can install Photoshop on both systems, however you can use a system at a time.

  Kind regards

  ~ Mohit

• Don't I have two graphics cards on my laptop sve14a27cxh

  How will I know if I have two graphics cards on my laptop sve14a27cxh?

  Hi Richard,

  Yes, the computer model SVE14A27CXH is installed with map two graphic. You can confirm this by changing the settings of graphics performance following the steps here: http://esupport.sony.com/docs/pc/SVE14A2_series/EN/contents/04/06/02/02.html?search

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Communication between two network cards on windows 2003

  Hi all

  I need your help.

  I have a machine virtual windows 2003 with two network adapters.

  NIC 1 - external - 192.168.1.101

  Map NETWORK 2 10.10.10.1 - internal -.

  I've configured to operate as a DC and DNS serving 10.10.10.x network.

  DNS is configured to resolve before on 192.168.1.1 as redirector DNS requests.

  I have other machines connected to the 10.10.10.x network.

  They can ping 10.10.10.1, they can ping 192.168.1.101 but not 192.168.1.1

  I want to just be able to talk to 192.168.1.1 and be able to access the internet.

  No firewall between the two.

  Command-line may help, but I would need your help.

  Hello Prasad,

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forum.

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer&filter=AllTypes&sort=lastpostdesc

  Hope this helps you solve the problem, if any question you can write us and we will be happy to help you further.

• I can't access the internet. I get a message that I do not have a network card.

  I can't access the internect in my Pavilion s3707c slimline, message window: do not have a network card, replace a

  Message: no netwrok (from my HP pavilion s3707c) adapter, needinstall it and configurad, where and how can I buy a new installation? can I buy a USB WiFi dongle for instead? What kind?   Pls help, yourhelp are much appreciated.

  Hi eddy Chow.

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  ·         It was working fine?

  Follow the steps in the article.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  For reference:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3882331

  If the problem persists, contact HP support for more help and information.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• Have two networks. One is 'working '. The other is the "homegroup". 'work' to the internet. "residential"local group. IE cannot access the internet. Help

  So here's my problem:

  It is a routing problem.  In short, it comes down to how to get IE (or any application) to use a specific WiFi adapter with Internet and ignore the adapter WiFi that goes to a network is private with no internet.

  This is the situation and what I tried.   No joy.

  PC hardware:

  primePC = Win7-Pro with two WiFi.   WiFi-Internet and WiFi-Local-premium

  tabletPC = Win10-Home with a (currently) WiFi-Local-Tablet (not internet from now).

  Use the Description of PC hardware

  primePC is my laptop that I use for work and all the rest.  It goes where I go.

  Tablet PC is in my mobile office and stay in the van (office) when I'm on-site customer.  I use it for

  things like control my monitors in the van (office).

  Network:

  WiFi-Internet (primePC) is connected Internet router to the Internet.

  WiFi-Local (primePC) is connected via the Local router

  WiFi-Tablet (Tablet PC) is connected via the Local router

  Objective:

  WiFi-Local allows you to share files and use VNC for remote desktop.  (Win10-Home support not native RDP).

  Use wireless Internet to connect primePC Apps IE for example to the internet via WiFi-Internet connected to the Internet router.

  A photo is included.

  

  THE PROBLEM:

  Because primePC has WiFi-Internet and WiFi-Local, applications such as IE are getting confused.

  How can I say (other applications) to use wireless Internet for internet connection?

  What I tried:

  Have you tried ForceBindIP on Win7, but is no longer works.  I'm sure that at some point, it has worked.

  Even if I could make it work, I don't really like it.   There *.   I don't want to link to an IP address.  I want to

  link to a Mac address is the Mac of the WiFi-Internet address.

  Other Options:

  Soft router (ugly) There must be something that can do this.  But I have not found one.  I guess it's a kind of soft router.

  Firewall, routing (still ugly)

  I have a firewall (on average by the way).   Creating a routing table in AVG is not good for the following reason.

  The entire Setup is mobile.    WiFi Internet is constantly connected to different internet routers, so learning new IP address that I have no control over.

  Future:

  Currently, the problem is on the primePC.   But in the end, I have also a problem similar with tabletPC, since the tabletPC is going to have a 3G connection / 4G to the internet.  This connection will go up and down based on (A) if I have internet with WiFi-Internet-router or not.   Using a hub of 3G / 4G for private network will not be good option because (A) the security because it allows access to my tablet, another security van mobile devices (B) cost of using a mobile router WiFi "hot spot" vs just to have two phone lines, both have unlimited data service of attachment (not unlimited hotspot service).

  Hello

  According to the description, I understand that you have a routing problem, you try to get IE to use a specific WIFI adapter with the internet, while ignoring the other WIFI adapter that goes to a private network.

  It is not possible to connect two computer to the same WIFI cards. You must unmark a WIFI to use the other WIFI adapter.

  You can search using your search engine to find any third party software which may help you.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  your computer is connected to a network domain?

  If your computer is connected to the domain network, then I would recommend to post your query on TechNet Forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  TechNet is watched by other computing professionals who would be more likely to help you.

  Hope this information is useful.

• Routing between two network cards

  I have 8 fiber switches that are configured to use a private network for management.

  The subnet is 192.168.8.0/24.

  I have a W2K3 (SERVER A) server with two NICS, a NIC (192.168.8.1) is attached to

  the 192.168.8.0 subnet and the other (192.168.100.14) NETWORK adapter is attached to the subnet 192.168.100.0/24.

  I put up two persistent routes of road between these NICS using the following commands:

  Pei route add 192.168.8.0 mask 255.255.255.0 192.168.100.14

  Pei route add 192.168.100.0 mask 255.255.255.0 192.168.8.1

  I have an other W2K3 server (SERVER B) with a single NETWORK (192.168.100.12) card that must be able

  to connect with the fiber switches via tcp/ip. Packets should be routed to this server.

  On that I put in place a permanent route:

  Pei route add 192.168.8.0 mask 255.255.255.0 192.168.100.14

  Everything works very well.

  (Assumes that the SERVER-A and SERVER B are now turned off)

  I'm trying to reproduce this on my VMware ESX Server 3.5upd3.

  ESX server has two NICS, one attached to each of the subnets. I create a virtual machine to replace SERVER-a

  with the same number of network cards and the same IP addresses.

  I then create routes as follows:

  Pei route add 192.168.8.0 mask 255.255.255.0 192.168.100.14

  Pei route add 192.168.100.0 mask 255.255.255.0 192.168.8.1

  PROBLEM: as soon as I add the second route I can no longer ping any server on the 192.168.100.0 subnet.

  This also causes connections to last very long.

  Do I need to implement routing between network adapters ESX scale to make this work?

  If so maybe want the command look like? If not, what could be my problem?

  Thank you for the helpful answers

  If you want to configure your machine as a router, you will need to notify the router is the next hop.  Now, the next machine break is its own interfaces, which will not work.  And since you are running some sort of routing protocol, provide two solutions to exit the server is not a good idea, because he doesn't know that one to use.  It will use 1 for some and another for some.

  Do what you intend (or I think you intend), you must delete the static routes and choose a default route, which will be your next jump.  This should be another router in your environment.  Then, the other servers that you want to route via ServerA, ServerA interface on this segment would remind you.

  Hope that makes sense.

  -KjB

• Cable connection part for good - once I started using the wireless NETWORK card!

  Hello

  I went although all people in support on this issue, but now I have no other choice than to ask all you people here!

  That is the problem. I have two computers with multiple network cards. One is a laptop computer with wireless Draft-N support and 10/100/1000 NIC onboard. The other is a desktop computer with an ASUS Wifi b/g edge and also dual GigE ports nVidia graphics card.

  Whenever I try to use network wired for internet or local network even cards use, it died on me. It is impossible to obtain an IP address from the router to use and is unable to communicate with anyone at all. Not even with my local network or even directly to the router (192.168.1.1). If I turn on the wireless card, it connects and everything is groovy (except that I lost my GigE connection to my local network, which is most important!).

  I havegone through the standard fare of cyclic power to the router and cable modem, reboot of my machines, etc. all the normal things, we are required to do.

  After some hassles with the support of Linksys to get them to send me a new WRT330N, I finally received a new WRT310N and it shows exactly the same problem! Wireless connections work fine, but as soon as I disable the WiFi and wired go, Windows XP gives me nothing else than a message "limited or no connectivity" and let me out of the network.

  This leads me to think it's some sort of network problem due to multiple MACs on the same host name. Does anyone know how to get around this problem?

  Thank you!

  Disable the firewall on the computer and then also try to connect the computer to the modem and check if the computer is able to connect.

• Windows 7 doesn't have a network card after that I did a clean install of the operating system

  After doing a reinstall full Windows 7 my manufacturer's CD, I can't connect to the internet or a LAN wired or wireless, probably because the BONE is not an installed network card, in accordance with the resolution of the problems Windows. I reinstalled the operating system again and again, and I still have the same problem. What can I do next to install the network card? I am ignorant full when it comes to Windows/Apple stuff (I'm a Linux user, but I need a Windows PC to run specific working software) so thank you in advance for any help.

  Hello

  Welcome to the Microsoft community.

  It seems that the driver for the network adapter does not work on the computer. May not have been installed properly.

  Please answer these questions so that we can better help you.

  1. What is the brand and model of the computer?

  2 was the work of (internet) network adapter before the reinstallation of Windows 7?

  3. What is the status of the NIC in Device Manager?

  To check the status of the device,

  (a) press the Windows key + R , type devmgmt.msc and press enter.

  (b) to expand network adapters and verify a yellow exclamation point.

  (c) make a right click the adapter and click Properties and check the device status on the general tab.

  We have to download the drivers for the network card on the system manufacturers site and install it on this computer.

  Get back to us with the required information for we can help you.

• WS370 Precision doesn't have a network card?

  I have a WS370 precision running XP Pro SP2(recent purchase from Dell Auction). I'm trying to connect to my network home. Using the computer information of advanced scanner in XP Help and Support Center, it says that the network adapter is not installed. Device Manager lists under cards network, just a 1394 network adapter. I think it's on my sound card. I have a Creative Audigy Audio Processor. Some of the research that I did, some sound cards have a connector for firmware. I look to the top of the map his tho. The back of my computer has a port for a network cable to connect, and the user guide shows (downloaded from Dell manuals)

  I plugged the router and the socket at the back of the computer, but its does not work. I have restarted my computer several times. In network connections, the only thing appear is that 1394 under LAN or Internet high-speed connection.

  Under the downloads section at Dell it lists two possible drivers. If I am able to install one of them the network card will then appear in Device Manager?

  I appreciate any help I can get.

  Malron

  Message edited by Malron on 05/27/2008 02:11
  
  

• PC does not have two video cards installed

  I recently bought a HP Compaq 6005 Pro Athlon II desktop, running Windows 7 Pro 64 bit. I like to use two monitors, so I bought a XFX Plus Edition video card to run my second monitor. Now my PC only sees the new video card. Read the specs for the PC, it gives "integrated graphics" as the description of graphics.

  How to recognize the two cards? Or will it? Do I have to remove the graphic card that accompanies it and replace it with another card XFX or can I not do it because it's built? (Not sure what built-in means in this case.)

  Thank you!

  Hello:

  I'm assuming that you intalled a PCI express card chart and not a PCI one.

  Check your BIOS under Advanced options. Some models have a built-in video (enabled/disabled).

  If the parameter is not gray, set to active, save it here you should be able to use your integrated video card and the video card.

  If you do not have this setting, or it is grayed out, this means when you install a PCI Express (PCIe x 16) video card, integrated video is automatically disabled and cannot be used.

  Run your two monitors two outputs of the XFX video card that you have installed (like out dvi and vga monitors, for example).

  I did a few times before.

• I have two sound cards. Can I use the input to the output to another?

  Basiclly the problem I have is that I use one of my as a configuration of 5.1 sound cards speakers (I put the MIC and line as output) and I found another sound card in another PC. The question that I have, that now I'm not a line or a microphone available for the first sound card, is possible to distribute the Line In input of the other card, to the first?

  Hi KiralyAlex,

  Unfortunately, it is not possible to perform this task, because at some point that a single sound card can be defined as a default device.

  However, you can use your favorite search engine & download any third-party software that could serve the purpose.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• I have two video cards is a nvidia model 162 is the other an asus v8170 / 128 m they do not seem to work with windows 7 Why

  I tried to update the verified drivers compatil which can make

  I think you'll find that HP a700n uses the integrated graphic card provided by Via the Asus A7V8X - LA motherboard chipset

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00069442#doc

  To the OP

  Asus alias Nvidia 4 series 440MX only is not supported under win7