For a recent funeral where the mourners were mourners came from far and from all directions, I wanted to tag a photo of a card to send an email to allow them to find the crematorium (GPS was not an option for most!). This has resulted in

Similar Questions

• How to find all photos in Lightroom where the original file is not found?

  Greetings

  I know there are a lot of pictures in my library in Lightroom where the original file is not found. How can I find all the photos for which this is the case? In other words, I see the exclamation point error in the upper right part of some photos and I would like to find all photos that have this condition so that I can link them to the originals.

  Thank you

  John

  In the library Module, chose the menu library/search all missing Photos

  

• app purchase where the physical store is not present

  I am from Bangladesh and that you wish to purchase an app on the app store, but there is no shop in my country. is there an alternative way for app purchases where the physical store is not present

  TIA

  Mubaswir

  No, the only place to get iOS apps is on the app store (via iTunes on a computer or an App Store app on an iOS device) and you must be in a country to use its iTunes/App store (which is part of the terms of the store) - until if/when Apple open an iTunes store in Bangladesh (we are fellow users we do not know what might happen until Apple announce something) Unfortunately you will not be able to download any content from the iTunes store.

• DDL required for the complete installation was not found. Error 1603. What should do?

  DDL required for the complete installation was not found. Error 1603. What should do? A link where to download the required DLL? Kindly help please.

  I tried everything, but received the same message. Attached to the screenshot.

  

• An error occurred when trying to share < folder name >. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time

  Original title: sharing folder error

  How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share . There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. »

  Hello

  Were there any changes made on the computer before the show?

  I suggest to see the link and try to run the Troubleshooter:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

• I exported the photos in a folder that is named in the order. Now I want to export more photos in the same folder, but take the sequential numbers where the last export was stopped. Finally was Apr_409, in following should be Apr_410. Not Apr_1 (1). Any a

  I exported the photos in a folder with the photos sequentially named. Now I want to export more photos in the same folder, but take the sequential numbers where the last export was stopped. So if the last photo was named Apr_409, I want the following to be Apr_410. Not Apr_1 (1). Any advice? Thank you!

  Hat is not a feature of Photos.

  If you want to make sure your new export is sorted after previous export, change the field "sequential prefix" in the Panel of the export to a string, which will be sorted after the original prefix you have chosen.

  

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• Error determining responsible for image size: the loading object is not sufficiently loaded to provide this information.

  Hello

  I am trying to load and image and determine its dimension immediately after loading.  I use a Loader object and check the width when the object of the loader's contentLoaderInfo Event.COMPLETE event is triggered...

  myLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, onLoadComplete);

  Then:

  public void onLoadComplete(event:Event)

  {

  trace (myLoader.Width); 0

  trace (myLoader.contentLoaderInfo.Width); Error: The loading object is not sufficiently loaded to provide this information.

  }

  I tried something similar with the event of Event.INIT but same result.  Any ideas on the best way to solve this problem?

  Thank you!

  Moshe

  I think it's the answer to your question:

  trace(event.currentTarget.width);
  

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• The specified parameter was not correct: ".."

  Hello

  I am using VMware vCenter Converter Standalone to virtualize a few physical servers on an ESXi server.

  I installed ESXi 4.1.0 on a new server (quad core 2 processors, 48 gb of ram, a mirrored raid (where is the ESXi software) and a raid 5 for virtual servers).  I've already enabled 64-bit virtualization in the bios of the destination server.

  The first server I want to virtualize is a small server (Nothing mission critical).   The software main is executing is SpiceWorks.  I installed VMware vCenter Converter Standalone 4.3.0 Build-292238 on the source server.

  The error that I'm left with after you run the converter is:

  The specified parameter was not correct: ".."

  Let me guide you through the steps of how I get there.

  Launch of vCenter Converter

  Click on Convert Machine

  Under Select Source Type: Tension machine

  Specify the machine 'this local computer '.

  Next

  Select the Destination Type: VMware Infrastructure virtual machine

  Server: xxx.xxx.xxx.xxx

  user name: root

  password: password for root

  Next

  Name: leave the same...

  Next

  Select localhost.localdomain

  SELECT data store: Data1 (it was created on the raid 5 group, 860,75 1 GB of free space)

  Virtual Machine version: Version 7 of the

  Next

  Check the destination parameter... Check

  Let all the suggested default values / (go play with it more that one I get a working basis...)

  Next

  Summary (see bottom of post for summary)

  Finishing

  Special presentation...

  Then I get the error message

  The specified parameter was not correct: ".."

  The error message ends actually in times of double quotes

  If anyone has any suggestions, I would be grateful.

  Thank you.

  -

  ---

  Summary

  Information source system

  Source type: slot machine tension

  Name/IP address: the machine where works the VMware vCenter Converter Standalone server

  The CPU limit: None

  The network limitation: None

  Destination system information

  Virtual machine name: xxxxx

  Host/server: xxx.xxx.xxx.xxx

  Logged in as: root

  VM folder: None

  The host system: localhost

  List of resources: by default

  Power after the conversion: No.

  Number of processors: 2

  Physical memory: 3584 MB

  Network: Preserve County NIC

  NIC1 connected

  The VM network

  Type of disk controller: Preserve source

  Storage: The Volume of cloning-based

  Data configuration files store: Data1

  Customization of the destination

  Synchronize changes that occur during cloning: No.

  Install VMware Tools: No.

  Customize the guest operating system: No.

  Delete restore points: Yes

  Reconfigure the virtual machine: Yes

  in step 3 you can check to see if all volumes can be copied?  Just to make sure that it is a disk volume to move...

  The error should be something between the two tick marks, which is not double quotes.

  He complains that a value is null, rather than not null.  So, in step 3, make sure that nothing is missing.

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• Converter Standalone 4.3.0 question - Get "the specified parameter was not correct" and no source listed volumes

  Sorry - hopefully an admin can move this to the correct forum. I could find no community forum labeled converter so no idea where to post this message.

  My first time trying to use the converter. Use the latest version of the Converter 4.3.0 to try a P2V by using the source computer. This is a laptop Dell D820 running Windows 7 Ultimate x 64 business. I chose the source machine and all the default settings. Destination product is VMware Workstation 7.x and target files are either local or to a port USB drive (tried both). In the last step, I get a yellow bar with the error "the specified parameter was not correct" "but the following quotes are empty and presume it suppose to say the name of the setting.» The only thing I see that is suspect is that if I click on change in section 'Data copy', the list of volumes and empty and assume that shouldn't be. The sample video to get advice on the use of converter on VMware support sites show a volume listed here. I tried the same approach on a completely different system under Vista SP2 and still no volumes appear so maybe it normal?

  No idea what I am doing wrong? I did export logs and watch and it appears no volume information has been captured (a lot of & lt; destroyed & gt ;) but even once, just guessing.) Any advice would be appreciated greadly.

  Thank you

  Don

  I had the same problem on a Win7 x 64 machine... There was no listed disk to convert.

  I managed to solve the problem by running the converter as an administrator. Right-click on the Desktop Converter icon and select run as administrator.

  The disks appears and you can select which can be the converter.

• The screen of my computer no longer turns. It is supposed to run it any way, I flip the screen, I can not understand how to solve this problem

  The screen of my computer no longer turns. It is supposed to run it any way, I flip the screen, I can not understand how to solve this problem. I guess a child (best case scenario) or my husband (worst case) have been involved in this. But it drives me crazy. Any ideas on how to get that back in action?

  Hello

  What is the brand and model of the computer?

  Were there recent changes made on the computer before the show?

  This issue could be due to corrupted graphics cards drivers. I suggest you to update the latest version of the drivers of graphics from the manufacturer's Web site and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  Thank you.

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882