For a Web server network settings

Similar Questions

• PDF has not been configured for this web server-2008 Server

  Hello
  
  Try to open a report in preview PDF in the workspace and get the error "" PDF has not been configured for this web server ".
  I use a 32-bit server and hyperion 2008 11.1.1.4...
  I already installed Ghostscript 8.51 in my server...
  
  Thank you

  Yes, I got the solutions... .i need to run the HRprinters.exe then I restart EN and pool services

• Need a SMTP service for the web server running Windows 7 Professional SP1

  The remote server administration tools package seems to work only for the management of Windows 2008. I have a web server running on Windows 7 and want to integrate the messaging service. IIS 7.5/7.0 does not include this feature. Now that are remote server administration tools installed, I tried to use the feature of IIS 6.0, however, a message is displayed to indicate that I don't have the SMTP service is installed. I checked the 'Server' SMTP under functionality after installing IIS 6.0 from the admin of remote server Pack. This does not install the feature. Could someone give information on how I can install email/mail service or function to use with my domain name on Windows 7 Professional SP1? Thank you.

  Microsoft recently released an update for the Remote Server Administration tools work with domain controllers running Windows Server 2008 R2 SP1.

  You can download it at the following link:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7d2f6ad7-656b-4313-A005-4e344e43997d

  For further assistance, please post in the following forum:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• NAT problem for the Web server

  
  I have configured the new cisco asa 5512. I can't access our Web site from outside. We host our internal site
  This is how I configured. Internal IP of the Web server is 192.168.1.19
  in the following config, I changed my public ip of the webserver to 99.99.99.99
  Can someone help me with this.
   
  the Web server object network
  Home 192.168.1.19
  NAT 99.99.99.99 static (inside, outside)
  NAT (inside, outside) interface static tcp www www service
  outside_access_in tcp allowed access list any object Webserver eq www
  Access-group outside_access_in in interface outside

  It is not open by default, but you already enabled.

  Remember that all you need is a translation you have:

   object network Webserver host 192.168.1.19 nat (inside,outside) static 99.99.99.99

  And the list of access allowing access to desired ports:

   access-list outside_access_in permit tcp any object Webserver eq www access-list outside_access_in permit tcp any object Webserver eq 8080 access-group outside_access_in in interface outside 

• How can I find the name and the password for my web server integrated for my wireless printer?

  I think I chose a name and a password to get into my settings for my wireless printer want in my (EWS) but I don't know, but I can't remember what they are, if I did it, and now I can't change the settings of the printer, scan or anything like that.  I was wondering if anyone knows how to find them, or get back them.  Or I have to uninstall and start all over or what?  Thank you very much for your thoughts in advance, I know that sounds stupid, but I don't know what to do now,

  kenc58.

  Hello kenc58.

  I'll try and help you solve this problem for you. If you touch install you the key on the front panel of the printer to go wireless. When, in the wireless section, scroll down to the last option which is restore default network. After that, you will need to run the Wireless Setup Wizard again. The Amin password should be gone. I hope this helps.

• How to change the local IP on the virtual NETWORK adapter for Web server address

  Hi all

  I have a physical Windows system, on which I run VMware Workstation 9. Now on VMware I run Ubuntu 12.10 a LAMP for a Web server.
  Problem:
  Now, my local IP address for my NETWORK card virtual (using the Ubuntu one) at the address 192.168.159.7 and my router only emits the 10.0.0.x range IP addresses. So if I want to port forward to the virtual NETWORK adapter that has a 192.168 address, I can't, so my LAMP Web server are not accessible to the outside because the router does not send packets on port 80 to the virtual card... How to fix this?
  The only way I guess that is to be assigned an ip address of 10.0.0.x to the virtual NETWORK adapter?
  But how do I do this?
  I tried to do it on the host from the Windows machine with "get my IP address automatically", but she emits an 192.168 address every time...
  Thank you

  Welcome to the community,

  I guess that the virtual computer is currently configured to "NAT" or "Host-Only' networking! That would explain the 192.168.x.x IP address.

  There are 2 options to be able to access the web server on the virtual computer.

  1. with "NAT" network configured

  In this case forward port 80 to the IP address of the host and configure the port forwarding on the virtual computer in the "Virtual Network Editor. This way you can leave the IP address on the private network of 192 (if it is currently set to NAT)

  2. use "Bridged" network layout

  Reconfigure the virtual NETWORK adapter to the machine virtual networking "Bridged" within the parameters of the virtual machine, assign an IP address from your router network (10.x.x.x) and do the port forwarding on the router directly to the IP address of the virtual machine.

  André

• Designjet t520: designjet t520 default login and password for web server

  Hello!

  Which is the default login and password for the web server and how to reset the password?

  Hello
  
  As mention Rashed, there is no password to the factory.
  
  Try a Restore Factory Settings.
  
  If this does not work, go to the Help Menu and do a Soft Reset. (Don't do the hard reset).
  
  For access to the support menu press on and hold the power button for 15 seconds, or at the home screen tap home, back, home, home.
  
  Concerning
  
  Mike

• How to find the type of Web server is configured for use with ColdFusion

  Hello

  Where can I check to see what kind of server that ColdFusion is configured to run currently? I have an existing CF installation 9.0.1, which I'll be removing and installing CF 9.0.2. During the instalation of the 9.0.2 version I would need to specify the server to use - Server ColdFusion / Apache / IIS etc. My question is, where I see in CF 9.0.1 existing to understand the server that is currently being used.

  Thank you!

  You can use the Web Server Configuration tool. Assuming you are on Windows, the path to start is generally

  Start-online programs-online Adobe-ColdFusion 9 online-online Configuratiol tool for the Web server

  In fact, you can use this tool to add or remove web servers.

• Requirements for Web server for ColdFusion

  We are running Windows 2003 Enterprise both 2000 Advanced Server and must support a form designed in ColdFusion. I have some difficulty to find the requirements for the web server. Pointers would be greatly appreciated. Thank you!

  http://www.Adobe.com/products/ColdFusion/productinfo/systemreqs/

  I went to www.coldfusion.com and clicked on the 'system requirements '.
  link on the right.

• External DNS & IP network settings?

  OS X 10.10.5

  Server 5.0.15

  I have several problems with my services, and, while I thought I put in place correctly, all signs point to DNS problems.

  For reference, here's my simple setup with IPs (my external IP is obviously false):

  Modem > router (Apple TC) > Server (Mac Mini)

  1.2.3.4 192.168.1.1 192.168.1.100 *.

  In the DNS of Server.app Panel, the State says:

  Status: (8) the value your network 1.2.3.4 DNS settings to use this server

  That doesn't seem fair.

  In the airport settings, the DNS server is 192.168.1.100.

  In my server network settings, it is set to 127.0.0.1.

  Everything * looks * right, but I'll have questions left and right with (WebDAV) file sharing, user and management group (with and without Open Directory), etc. etc. etc.

  Fortunately the websites is working very well.

  Can you make suggestions?

  * There are duplicate ethernet (virtual hosts) services with IPs ending par.10.11,.19,.20,.29,.30 et.39

  Are you sure that you have configured the Apple Time Capsule to be in router mode? You want the WAN port, i.e. the lower hole of the Capsule of time connected to the modem and the time Capsule set on ' router Mode: DHCP and NAT'.

  The server will probably be on Ethernet and must be connected to one of the LAN ports on the Time Capsule or via a switch connected to one of the ports LAN on the Time Capsule.

  You must configure the DHCP server in ad time Capsule the 192.168.1.100 your server as DNS server address.

  Maybe you have not configured the DHCP server on the Time Capsule, so it may still be using the default settings and therefore advertising address of the modem.

• LabView 2009 Web server crash

  Hi all!

  Here's a simple VI containing any control, functions or library in LabView 2009 f3.

  

  Web server settings are default. After the tools-> operation of another PC Web publishing tool we are connecting to this Panel (IE6 for example) and put a finger to the F5 not lifting.

  Web page with the VI is very refreshing.

  There are 3 results.

  1. in DevEnv: LabView die.

  2. in DevEnv: need to restart LabView for charging Web server and restore connection.

  3. in App.exe: die

  4. in App.exe: LabView interpreter loose some time-cycles in the cases where they exist, but connection stored.

  5. in App.exe: but lost connection application work.

  Is this normal? Are there settings in Web server to avoid this situation.

  
  

• HP Laserjet M606x: Disable the option 'Print' in the built-in Web server

  I am testing a new HP Laserjet M606 device and to disable the option 'Print' which is displayed in the 'Information' tab in the built-in webserver (EWS). I have a firewall turned on, turned off wireless printing, FTP, AirPrint, Web Services, PPI and independent producers is also disabled. HP Jetdirect XML service is also disabled. I have crossed most of the EWS settings and configuration options in JetAdmin and did not find an option to turn this feature off.

  The device will be located in a public place and will have a reserved/static IP address (DHCP reserved). We charge for services to the end-users of printing - having this option turned on means that users can print for free if they find the IP address of the printer - not an ideal situation.

  Is it possible to disable this option permanently? The only other solution is to disable EWS entirely, if possible.

  To be a little more specific in the built-in web server click the Security tab. Now scroll down until you find the section for embedded web server settings. I was watching who had enough current firmware in the machine there is a checkbox to enable or disable the option for printing on the information page.

• Upgrading to 4 Fusion and now I can't access the web server on my Mac host

  I am running OS x 10.6.8 and I'm hosting a virtual machine running windows XP, using NAT Networking. I have a web server running on the mac I need to access from the hosted virtual machine. I used to be able to just use the IP address of the gateway in the virtual machine for the web server, but it doesn't seem to work. If I set the external IP address of the mac it seems to work, but I don't have a static IP address, so it is a pain to update every hour.
  
  Any help would be appreciated!
  
  Thank you

  Although in some cases, the IP address of the gateway works, nevertheless IMO that is a misuse and should use the address IP of VMware NAT Virtual Ethernet adapter IP address the host not IP address of gateway.

  If in a Terminal, run the following command:

  ifconfig | grep -A 3 vmnet8
  

  Then use the address after "inet" IP said at the exit.

  Example on my system:

  Last login: Mon Jan 16 12:43:00 on ttys000
  Computer:~ WKZ$ ifconfig | grep -A 3 vmnet8
  vmnet8: flags=8863 mtu 1500
      ether 00:50:56:c0:00:08
      inet 172.16.198.1 netmask 0xffffff00 broadcast 172.16.198.255
  Computer:~ WKZ$
  

  So I use 172.16.198.1 of the prompt or use the host name of the Mac (without the .local) after the addition of 172.16.198.1 and the hostname of the Mac to the guest hosts file.

  Post edited by: WoodyZ - posted: January 16, 2012 12:52

• Info general solution on Internet interface with active web server on microcontroller (Ethernet)

  My intention is to have the on-Board Unit (ATMEGA32) located in a remote place, somewhere over the internet (connected via Ethernet) connected (via CANBUS) for the fuel cell system for the measurement data (current and the temperature of the fuel cell).
  The end user and/or client must be able to display these data acquired via the browser on the internet. The main objective of this project is to prevent any pc dedicated as a simple web server, so I would like to know your general solutions.
  (I noticed that I can't impelent a web server on this microcontroller, but how do I set the GUI to display data on the browser for users?-I want to say I'm not accurate if the designed GUI (LabVIEW or c SHARP) must be in the internet (solution host & domain) or there are better solutions for her.)

  If you have a solution for the web server on the microcontroller and are convinced that architecture will work, it seems that your question is how to write a client for data.

  Some of the things you're talking about sounds like you want the web server on the microcontroller to respond to a fully functional GUI to any client. This may not be practical because of the computing power limited on the microcontroller and the difficulty of setting up and maintaining this type of server in a microcontroller environment.

  A more common architecture that I've seen is just to serve the raw data and let the client user to interpret the data and display them as graphics, etc., this means that the user must Access the microcontroller of a computer running a client that you make.

  You can use the communication/protocols/http client in labview palette or you can write a c# client that it is really a question of what data you need to acquire, and what language you are most comfortable in.

• NEITHER Application Web server refuses to be activated

  I am trying to deploy a web service in LabVIEW 2010 and it fails to deploy in saying that the Web of Application service OR work...

  If I connect to http://localhost:3580, log in as Admin (empty password) and click on the page of web servers. I put the server to Application Web 8080 port, click on the check box turn on... then click apply - and the only thing that happens is that the browser displays the error on the page symbol in the status bar... There is not 'yes', showing next to the Enable checkbox for the web server of the system...

  So - if I start again from zero and do the same thing, but also click the 32-bit option button before hitting the button apply - what is happening? Well, I get an error dialog box:

  

  The service itself (32-bit, 64-bit is registered but not also started) runs according to the services control panel...

  I'm stuck... If anyone knows what is missing here, is there something I am doing wrong, or something that must be done before activating the application service?

  Uninstalling and reinstalling 32-bit LabVIEW 2010 on two different computers revealed that the problem appeared only on my Vista 64 bits - not the Windows 7 32-bit macine macine...

  By looking at the services that are running on the machine with the problem that I could see that he was running the 32-bit version of the application Web server, had a 64-bit installed but disabled--but--only the latter has been fixed to depend on the Web Server service of NOR. This seemed a bit strange that the 32-bit version on the 32-bit computer was dependent on the Web server of OR...

  So - I disabled the 32 bit Server Web Application service OR, turned on the 64-bit... and - I am now able to configure the Web application server to start.

  Why so the 32 and 64-bit application Web services installed, with only 32 bit one running-, but not properly? This happens to everyone, but everyone arranges it by opting for the 64-bit version... or is there something that causes the installation get messed up?