For both needed local Sites FTP connection

Similar Questions

• Save the site FTP connection information

  I realized that I can record a MUSE site to the cloud Creative if I can share the maintenance of the site between my two computers. It works very well for if ensure that a site is kept synchronized between two computers. One thing that is not getting synchronized is the FTP information. At the present time I save a small .txt file in the CC with the .muse document the connection information is so convenient when I need to re - type.

  Y at - it a trick or a trick to get the FTP connection information, stored in the .muse file, so I don't have to retype whenever I go to computers?

  Hello

  Please take a look at this discussion, it might answer your question

  Re: 'Upload to Host FTP' identification information missing

• Compaq Presario 5400US - need network drivers for XP Home Edition. Wired connection.

  It woun't connect to internet using a good modem and cable (other PC connect successfully using this same equipment). When I type IPCONFIG, I get 2 results, one for Local Area Connection2 for LAC3. Two of them have 169.254.xxx.xxx IP addresses. Both Suffixes DNS blank and empty default gateways.

  When I go into network connections, the LAC2 says "Limited or no connectivity", but it lists a Linksys LNE 100TX Fast Ethernet Adapter. Linksys? I don't have any Linksys product. LAC3 says 'Connected' with the help of a WAN network driver. However, in the Notification area network connections has the same yellow triangle as LAC2. When I right click the icon in the Notification area and select "Repair" I always get the following ".." following action cannot be completed: renewing your IP address.

  If I right click LAC3 (the one that says 'Connected'), click Properties, click TCP. IP and select Properties, it is set to get an IP address and an address of DNS server automatically. It is also the same for LAC2.

  Client DHCP, DNS Client and call the CPP are started.

  I tried ipconfig/release, ipconfig/registerdns, ipconfig/flushdns, netsh winsock reset. When I run it ipconfig / renew I get messages (after he is sitting there for 2 minutes)
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...

  A run chkdsk /r have run the command netsh int ip reset reset.log.

  So, I went 2 network cards, restarted in the device and removed Manager and let Windows reinstall. Windows creates a new connection to the Local network (LAC4, 2 and 3 are gone). It only reads limited connectivity or none and is using Linksys LNE 100TX Fast Ethernet Adapter, like the previous LAC2. The previous LAC3, who uses the network never got WAN driver reinstalled. I don't understand.

  Since an adapter Linksys on a wired connection seemed odd I have tried to find what should be the correct network driver.

  I google "Compaq Presario 5400US" "driver ethernet" OR "network driver" and was taken to a page of drivers HP, which I think makes sense since HP now owns Compaq
  http://h10025.www1.HP.com/ewfrf/wc/s...UCT=93284#n430
  This page has nothing listed for network or chipset cards.  This, of course, has no meaning for me.

  Can anyone help?

  Select this version from the drop-down list on the link that I posted above.

  Depending on the size of file, it does not resemble an auto install file. Accept the agreement and unzip the file into a folder.

  So, download it to a folder and go to Device Manager.

  Click the network card in need of drivers, and then select manual search for drivers. Navigate to the folder where you extracted the drivers and the driver should install.

• One of my sites always connects, but the other becomes had an ftp error cannot connect to the host.

  My problem is in "connect to remote server". I manage two sites in Dreamweaver CS6, and they are hosted by the same guy.  A site still connects fine, but it stopped connecting. With the second site when I click the button I get a delay then "an ftp error occurred - cannot establish a connection to the host".

  However, I can still access the second server in the remote site through an FTP program and support host confirms that my connection works very well from his computer.

  I tried to do with the old stuff (1) Site > Manage Sites > export to create an .ste file (2) completely, restart the management of Sites (3) > import the .ste file (4) click on connect to the remote server - But that made no difference

  The two sites are hosted by the same company does not mean that they are on the same physical server.  Your connection problem may be due to many things.

  • Username and password may have changed or been reset.
  • Server permissions problems (GoDaddy is known for this).
  • IP blocking.
  • Server is down.
  • etc...

  Are you able to connect with an FTP 3rd party like FileZilla client?  If this isn't the case, I guess it's a server problem & you will need to contact your host.

  Nancy O.

• Problems with FTP - connected successfully but the site does not update.

  Hello

  I was in need of an update to my site and see now having problems using FTP Dreamweaver CS4.

  I had to reinstall Dreamweaver on my system (as also, need an update). And had to remind myself of all the information that must be entered in Dreamweaver. However, this is not where the problem is, I can successfully contect to my host and load the files on the server, but then I reload my page of website and nothing has been updated. I tried numorus attempts to solve this problem on mine but without success.

  Is this a bug with CS4? Or should I use an external FTP program such as FileZilla?

  Any help would be appreciated.

  > Would it be the only thing that would cause me problems?

  No, it could also be your local site definition. If your local site root is set to the level of the fake, so files don't download to the right folder either.  Can you show us a screenshot of your local site definition?

• When you use Firefox, a site jumped upward and said it is Firefox search virus. He said then I got dangerous viruses and need to download a security program. It's for real? The site is update32.escmce.ce.ms

  When you use Firefox, a site jumped upward and said it is Firefox search virus. He said then I got dangerous viruses and need to download a security program. It's for real? The site has been update32.escmce.ce.ms I googled this site and it does not exist. Now, I'm worried about security on my computer.

  Sounds very similar to what I had come last week. I did not now what the site was, but I noticed that the box seems to be analysis what were the Windows system files, it could not have been real. I do not download anything either, and I think that if you have not then you are probably safe. I am far from being an expert in the field and am sure that someone with more expertise will also. I learned that the best thing to do is vacuum history of cache, cookies and remove and close the browser. Don't try not even close the box that I have read. I don't know if I did or not. I think that there is some nasty things circulating right now try to deceive us in their installation on our Macs. I agree that it's a very scary experience. I was shaking when it first happened to me.

• I just upgraded 5 c to 6 s GSM (o2). I have all new versions of itunes ob both devices. When I connect usb a message:-can't use the iphone "iphone" because he needs a newer version of itunes. Help!

  I just upgraded 5 c to 6 s GSM (o2). I have all new versions of itunes ob both devices. When I connect usb a message:-can't use the iphone "iphone" because he needs a newer version of itunes. Help!

  But you have the latest version of iTunes on your computer?

• I'm trying to set up Robin DNS for both terminal Servers Server on another site.

  Hello

  I'm trying to set up Robin DNS for both terminal Servers Server on another site.
  Our fields are not approved, but accessible through forwarders.
  I created two records as follows:
  xxx.x.XX.12 SRV
  xxx.x.XX.13 SRV
  When I perform an nslookup it lists two IP addresses
  E-mail address is removed from the privacy *.
  xxx.x.XX.12, xxx.x.xx.13
  When I ping srv it alternates between IP addresses
  Response of xxx.x.xx.12 bytes = 32 time = 10ms TTL = 126
  Did I miss something?
  Thanks in advance.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information

  Original title: router Question.

  Hi all

  not sure if this is the right place to post but I was looking for some information about routers. specifically, I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information. specifications, etc.

  Thanks :)

  Some routers will define a limited number of simultaneous connections. Domestic routers rarely do because the assumption is that the environment will not include such a high number.

  Ideally in a commercial environment you would separate on the hardware connection since the hardware firewall. It depends on the type of connection (ADSL?).

• In the case I buy Adobe Acrobat Connect Pro and want to set up a meeting with my students... They need to buy Adobe Connect for virtual classrooms?

  In the case I buy Adobe Acrobat Connect Pro and want to set up a meeting with my students... They need to buy Adobe Connect for virtual classrooms?

  No, they haven't needed to purchase Adobe Acrobat Connect Pro license if they use a room of yours.

• What components are needed for a deployment of Site Recovery Manager?

  What components are needed for a deployment of Site Recovery Manager?

  Instances of vSphere, vCenter Server and Site Recovery

  Manager are required at the time the protected site and the

  recovery site (this does not imply aspects of license.

  Licenses are covered in a segment later in this document)

  Site Recovery Manager also requires an underlying replication

  product to copy virtual machines on the recovering site.

  Customers have the choice of using either vSphere replication

  or a third-party software based on replication.

  When you use the Bay, a storage-based replication software

  Replication adapter (SRA) is also required.

• I have CC with multiple desktop applications; My wife has CC for Photoshop only. We all have both need to use Acrobat DC...

  I have CC with multiple desktop applications; My wife has CC for Photoshop only. We all have both need to use Acrobat DC, which is already enabled on my computer. She comes to install Acrobat DC on his computer via the creative Cloud, but he identifies himself as a trial. How his installation of Acrobat are activated under my account (as the second of two authorized activations)?

  How his installation of Acrobat are activated under my account (as the second of two authorized activations)?

  Two activations by Adobe ID are allowed provided that they are used by the same person and only is in use at any time.

  It can be used simultaneously by two different people.

  DC Acrobat is installed as a trial on your wife's computer, because it is signed with his Adobe ID and there is no active subscription for Acrobat DC under its identifier.

  Your wife will need to subscribe separately the Acrobat DC plan only App or plan all the Apps.

• Adobe first Elements 13 is listed as $79.99 (alone) or WITH Adobe Photoshop elements 13 for $119.99 (for both). I bought 13 items first by itself for $79.99.   Now, I realize that I need the 13 elements of Photoshop also.     My question I

  This is my first attempt in the Adobe community. I hope I'm doing this correctly.

  Please send me an email to [email protected] If you can answer my question.

  I'll paste it again here. Thank you! John

  QUESTION:

  Adobe first Elements 13 is listed as $79.99 (alone) or WITH Adobe Photoshop elements 13 for $119.99 (for both). I bought 13 items first by itself for $79.99.   Now, I realize that I need the 13 elements of Photoshop also.

  My question is: can I put the $40 more (purchase price of $119.99 in combination) to buy the 13 elements of Photoshop? Or do I have to pay the price of $79.99 (yet) to buy the 13 elements of Photoshop?

  There is no option to upgrade on the website of the $40 more purchase price (which would be equivalent to the original price of combination $119.99) after I bought the first 13 items only ($79.99).

  gt40john

  This isn't Adobe. Instead essentially a user to user forum.

  Suppose you bought the items 13 as a download from Adobe first.

  Adobe sells more than 13 Photoshop or Premiere elements 13 elements. He sells only the latest version now (v14).

  If you bought the first 13 elements download Adobe over the last 30 days, you should be able to request a return/refund from Adobe. I do not know how he would deal with an Exchange because it sells more than 13 - May 14 deal might be involved? Just in case you are eligible, Contact Customer Care

  And, if you bought elsewhere (from an authorized dealer), you are governed by the policy of return/refund/exchange of the authorized dealer, not Adobe direct.

  But if you are not within 30 days of the purchase, you'll probably eventually find a dealer authorized to buy Photoshop elements 13, although it is still available.

  Many scenarios here, but you should have business with Adobe on this if it goes back to the purchase of Adobe. If this isn't a direct purchase from Adobe, your fate is up to the dealer.

  RTA

  Add on... Please don't include contact information in your messages to avoid unwanted nuisance to your contact information.

  A moderator may delete such information once it is noticed by a moderator.

• I'm trying to upload my site using ftp, but for some strange reason, the ftp server box becomes red, even if the name is correct. everyone knows about this problem?

  I'm trying to upload my site using ftp, but for some strange reason, the ftp server box becomes red, even if the name is correct. everyone knows about this problem?

  Hello

  I would ask to share with you the screenshot of the box which becomes red.

  Concerning

  Vivek