How to set the length of the shape

Similar Questions

• How to set the length of titles?

  How to set the length of titles? The setting box has no such settings. Thank you.

  With the title on the timeline, expert Mode, just a click + drag on the tail (or head) of the title, in order to extend the duration. I would also like to open the information panel, so that I can see exactly this change in length.

  Good luck

  Hunt

• Hi, how to set the maximum number of connections of FMS on the same IP address

  How to set the maximum number of connections of FMS on the same IP address?

  The application.clients object available in action script server-side maintains a list of all clients connected to the Court at this moment here.

  You can browse the table and compare the property Client.ip to determine the max connections from an ip address and therefore accept/reject connections.

  It can be as simple as this in the application.onConnect

  application.onConnect = function (clientObj)

  {

  var totalConnections = 0;

  for (i = 0; i< application.clients.length;="">

  {

  If (application.clients [i] [ip] is clientObj [ip])

  {

  totalConnections ++;

  }

  }

  If (totalConnections > 10)

  this.rejectConnection (clientObj);

  on the other

  this.acceptConnection (clientObj);

  }

  Above the piece of code is untested so you may have to make some changes to make it work, but your solution should look something like this.

• How to set the size of column sqlplus.exe?

  SQL> select * from dba_cons_columns where user='USER1' and table_name='PARENT1';
  
  OWNER                          CONSTRAINT_NAME
  ------------------------------ ------------------------------
  TABLE_NAME
  ------------------------------
  COLUMN_NAME
  --------------------------------------------------------------------------------
    POSITION
  ----------
  USER1                          PARENT1_PK
  PARENT1
  COL2
           2
  
  
  OWNER                          CONSTRAINT_NAME
  ------------------------------ ------------------------------
  TABLE_NAME
  ------------------------------
  COLUMN_NAME
  --------------------------------------------------------------------------------
    POSITION
  ----------
  USER1                          PARENT1_PK
  PARENT1
  COL1
           1

  It seems little ugly to see these data. Why the length of the column is so long? Please tell how to set the length of columns and other settings so that the displayed data should come out in the form of a well managed and beautiful way.
  Like this:
  

  OWNER     CONSTRAINT_NAME     TABLE_NAME       COLUMN_NAME   POSITION
  -----------     ----------------------------     ------------------        ---------------------    --------------
  USER1        PARENT1_PK              PARENT1             COL2                  2
  USER1        PARENT1_PK              PARENT1             COL1                  1

  I wrote this by hand. How do I get the display to sqlplus.exe?

  Easiest would be to use the command column format and also the linesize option.

  sql>column column_name format a30
  sql>set linesize 300
  

  The order of column would make the display limited to 30 characters only. Also the linesize enlarge the display. Try it and see what it looks like?

  HTH
  Aman...

• How to set the number of e-mail messages that are stored on my iPhone

  How to set the number of e-mail messages that are stored on my iPhone – so when I don't have a network connection I can see a 'large' number of messages in my Inbox etc.

  This is series is not defined in the world

  You must go to settings-> mail, contacts, and calendars and check the settings of your e-mail provider offers in this area

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock

• How to set the default android home page.

  How to set the home page in the latest browser of firefox for android?

  Hello:

  Unfortunately you can not remove the top sites home page but you can pin a site, remove a site from unpin it and change the url of a pinned site.

  Please read this article for instructions.

  I hope this helps!

• How to set the time between slides in a slideshow (iPhoto, el capitan)

  How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.

  See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice

• Satellite C660 - how to set the focus of the webcam?

  Hello

  Just bought this laptop, the built-in webcam looks very blurry when I use Skype. Does anyone know how to set the focus to the subject?

  See you soon
  Jules

  Hello

  to be honest, I have no idea on your model of lap... Try to update driver webcamd and play with Skype video settings.

• How to set the date and time on my HP Officejet pro 8600 more?

  How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow key ( ), press Setup ( ).

• How to set the output meter channel to generate a signal pulse using DAQ6008

  Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

  If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

  Lynn

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set the value of a variable in a cluster in LabVIEW to c#?

  Hi guys, I'm working on a small c# program, which by using the interface provided by LabVIEW.  And I know that, with the help of lv. SetControlValue (name, value) can set a variable just on the front panel. But in my case, there are several groups on the front panel. Then it confused me how to set the variables in these groups. For example, there is a cluster named clusterA and a variable named a., I tried something like this:

  lv.SetControlValue("clusterA.valueA",1);
  

  but it totally inoperable. Everyone has some experience with this sort of thing? Thank you very much!!

  Hey guys, thanks a lot for all your response. I just found a simple way to solve this problem. For example, there is a cluster named "ClusterA", and there are only two witnesses, who are: an int value named "IntA" (default = 10 IntA value) and a string value named "StringA" (by default the StringA = 'abc'). In c#, if you call the method:

  var clusterA is vi (Array). GetControlValue ("ClusterA");

  you will get a table looks like: clusterA = {10, 'abc'}; So if you want to change IntA 123, you simply do:

  clusterA.SetValue (123, 0); 123 the value, 0 is the index of IntA in clusterA, after this clusterA table = {123, 'abc'}

  After that, simply to make the table in LabVIEW using:

  VI. SetControlValue ("ClusterA", clusterA);

  and now you see the LabVIEW, IntA is changed.

• How to set the voltage on a 3.3 volt NI 9237 module?

  Hello

  How to set the voltage on a 3.3 volt NI 9237 module?

  The voltage is now at 2.5 volts.

  This is my first time with this camera.

  This set of MAX or are there jumpers?

  I want the value of the excitation voltage at 3.3 Volts and do not change.

  The NI 9237 is a NEITHER cDAQ-9172.

  Thank you

  Bill

  Hi POBA,.

  This can be set to your programming environment.  For example, LabVIEW Signal Express, a task of MAX, or a DLL call in a text-based environment.  You want to create a strain, tension Custom with excitement, or any bridge based task in any environment.

  "" "In MAX, right-click on your device and choose create a task" acquire signals "analog input"...

  "" "In LabVIEW, place a DAQ Assistant" acquire signals "analog input"...

  "" "In Signal Express, add a step for Acquire" DAQmx Acquire"analog input"...

  In any C language based, you will want to call a function such as: DAQmxCreateAIVoltageChanWithExcit, DAQmxCreateAIStrainGageChan, DAQmxCreateAIBridgeChan

  You can then specify the Source of Exictation to be internal to 3.3V.

  Best,