I'm trying to set up Robin DNS for both terminal Servers Server on another site.

Similar Questions

• error after implementing Robin DNS for connection servers

  I get the error message "the secure connection to the VDM server has unexpectedly disconnected. Reason: error generic asyncsocket. "after the DNS Round Robin application for my connection servers see 3.1.  It happens only of my Hedgehogs with the view customer installed Linux Thin Clients. Anyone seen this before?

  TIA

  Tony

  Using Direct Connect?

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• DNS for specific domain (1), Server 5

  Hello.

  Ive got a server running DNS. Computer record is example.com. MX is mail.example.com and so on.

  But the Web page related to example.com:80 is in fact hosted outside my network, so I as the server to use an external DNS for example.com. If he uses the internal DNS, I get a server not found error in safari.

  I can do with the file "etc/resolve/example.com". But which only affects searches locally on the server. Not the customers who use the local DNS server...

  Y at - it another way to force all the users on the network to use external DNS for example.com (adding a host on all clients file works, but isn't very funny)

  Thank you

  El captain

  Server 5

  Hey Josie:

  Not quite sure I understand your question, but I think you're saying: the DNS lookups (on your website DNS record using a public address) work, other computers on your local network when you use the Mac for DNS server, but they * do * work if they use another DNS server. If Yes, this is expected behavior and the only way to have your site properly convert form these machines would be to:

  (A) that other computers on your local network using your Mac server for DNS resolution.

  (B) are the other servers on your local network DNS adds a secondary zone "example.com" with your Mac server as the master.

• Desktop themes: I am trying to add a new theme for my office everyone isn't a site I can download a halloween theme

  I am trying to add a new theme for my office does anyone no site I can download a theme halloween or any good themes besides?

  Do the free trial of windowblinds is always easier: http://www.stardock.com/products/windowblinds/

  You can download more than 4500 different themes for it here: http://wincustomize.com/explore/windowblinds

  teengeek.freehostingcloud.com

• error 0xD56 when trying to install SQL 2005 update for service pack 4 Server

  Update tried several times to install an update to SQL server.  SP 3 failed and now SP4 is ready and is also a failure.  On this last error code is 0xD56.

  I'm fed up with these updates failed and have tried various suggestions to eliminate it or have it left of the list, all to nothing done.  Grateful for any help or permanent solutions! I don't think I use SQL at all.

  under xp, sp3, on Lenovo T400.

  Hi sf007.
   
  -Are the other updates, complete the installation successfully without any problem?
  -What is the error message or error code that you received so that the failure of the SQL Server Service Pack 3 update?
   
  Method 1: Download and install the update manually from the link given below and check if it helps.
  Microsoft SQL Server 2005 SP4 RTM
   
  Method 2: If the problem persists and you do not want to install this update, hide the update.
   
  Follow the steps listed in the article given below to do the same thing:
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• Trying to set up wireless for HP Deskjet 3054 A! Help, please!

  I'm trying to set up the connection for my HP 3054 A wireless to my computer and the router so I can print wireless.  I had an old HP printer implemented and that Wi - Fi was very well but then I got a new modem from century link and the wireless was completely messed up.

  I use a MacBook Pro using 10.9.2 CD software is obsolete and only works on 10.5 and 10.6 then please do not mention following the instructions of the software.  The software "seems" to have downloaded the update to the Apple software, BUT I do not have any folder of HP or any installation assistant that I can find to help.

  My modem is an ActionTec PK5000 and has a WPS button near the bottom.  I tried to connect using the WPS button and all I get is "Error WPS" about 1/2 way through.  All I get is a blue light flashing for a wireless connection on the printer.  I'm so confused because under my wifi options, it lists "HP-Setup-87-Deskjet-3050A-J611" as a connection option?

  Ugh.

  I spent way too much time on this and thought that someone here would have some suggestions.

  Thank you!

  SOLUTION *.

  Please NOTE: I am running OS 10.9.2 on a Macbook Pro using an Actiontec Qwest/Qwest PK5000 modem.  It is the solution that worked for me.  If you have a different operating system or brand of modem or a computer - I can't talk about what will work for you.

  1. you will connect the printer via what is called a Web server integrated (EWS) - not through WPS, is not using a PIN or a push button, what are the options of the printer.

  2. make sure that your printer is reset by default.  To do this - press the button on the printer control panel wireless and navigate to "restore to the factory settings."

  3. then - make sure your modem is on and your ethernet cable is connected the modem to the computer.

  4. then - you'll want to navigate through your browser to this page http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5115807&lc=en&cc=us&dlc=en&lang=en&cc=us

  and select your operating system like 10.8 and press Next.  "Driver-product installation software" press the sign + and download the package on your computer.  I don't think it would work as it says 10.8 and 10.9 not but it works very well in the end.

  5. open the packaging of the HP software for the HP utility, and his assistant installation etc.

  6. run the installer of HP.

  7. before you "add a printer" make sure you that you logged into your wifi connections for a connection which identifies (or should) in your wifi networks as something like "HP-Setup-XX-Deskjet 3050 a J611" not the normal wifi connection you can use.

  8. now 'add printer '.  The computer should find the device and it should show as "Hello multifunction" rather than "USB" (which is what I kept getting).

  9. now - go to the HP utility page and you will see the different sections of information about your device.

  10. find the section "Printer - additional parameters.

  11. then you should see a box that says ' the selected printer can be configured using a built-in web server.  Discover patterns and information on the printer by pressing the button below. »

  12. press the button.

  13. This will connect you to the embedded online Web server.

  14. When you're on the embedded - Web server you will see several tabs at the top of the page.  Go to the tab that says 'network '.

  15 then the coast - find the wireless configuration wizard.  Who will guide you through connecting to the wifi network you use and configure your printer.

  16. After you run the installation wizard, you should be able to unplug your ethernet cable, go back to your wifi connected and normal that you use your printer up and everything should be good.

  It worked for me and I hope this saves people a lot of time dressing and that this will work for you as well.

  Good luck.

   

• You want to set the parental authorization for Xbox live.

  Original title: authorization wizzard - x box live

  I'm trying to set the parental authorization for x box live, but the permission Wizard is American and does not accept my UK address. What can I do?

  Hi LizG1,

  I recommend you contact Xbox Live support for assistance:

  http://support.Xbox.com/en-us/Xbox-Live/browse

  Hope the helps of information.

• Try to set up remote access for Foscam babyphone. Windows Vista & I have A Westell router. I can't understand this helps :(

  Im trying to set up remote access for a babyphone Foscam (Fl8918W). I worked on it all day.  No matter what I do, I can't get the camera to get on my computer (or iPhone).

  Here's some of what I've done so far...

  -Camera configuration and find the IP address

  -Type the IP address of the camera in the browser and camera open (it uses Active X)

  -Change Port number of the camera (Guide suggested using 2000)

  -Now you can type the IP address and the port number in the browser and access camera

  -Complete the Port forwarding on the router (I did this several times using each option that I could understand. Finally, I think that I did it correctly because it looked like he turned on - but I don't really know.  "I couldn't get any real information on the Port Forwarding for my Westell A90-750045-07).

  -Access using the public IP address.  It did not work at all. I had to find my IP address for my computer/network (which I did) then open my browser and type the IP address followed by: 2000 (new port). The camera was then to open in the browser, but it did not work.

  -IP service.  Management said that the device could be available over the internet using a public IP address. He told me to go on No - IP and sign up for the free service.  After the signing, I was directed to create a host name.  I managed to do it.

  -L' direct access of the ACTIVE camera address No - IP.  I was directed to type my address No - IP (hostname) in my browser, followed by: and the Port number (: 2000). He said that I should then able to access my camera from a computer or mobile app on the Internet using this address.  This does not at all.

  -J' tried to make it work with my iPhone. I was directed to download and install an application called Live Cams Pro - by Eggman Technologies.  He then ordered me to add a camera. I chose the correct model of Foscam, entered the IP address (or my No - IP address) WITHOUT port number, then on another line, I entered the Port number, entered my user name and password and click Save.  Nothing ever came and finally the connection times out.

  I did all the change of option combinations in each stage as many times I could think.  All I could change in these steps, I tried all the options I could.  I can't make it work.

  I'm so frustrated.  I'm not a computer person.  I managed to do a lot of things by reading the instructions carefully.  I read the Foscam Installation Guide and the next babyphones instruction manual (I bought the camera from the company).  Nothing I've tried works.

  Any direction would be greatly appreciated.

  Thank you!

  Did you put the IP cameras as a destination / local IP?
  If this is not the case, do.

  Aside from that, the best would be to contact the manufacturer of your router for assistance with how to correctly forward ports to your camera.

• How to set the text html for a label?

  Hi all

  I'm trying to set the text html for a label programmatically by using the following code

   tourDescriptionLabel->setText(""+tourDiscHtmlString+"");
  

  but unfortunately my display of the label

  Some text’s most known 
  

  I tried with this in webView has achieved the same result. I'm getting response json string. I've hardcoded, the response data such cases it shows how reqular.

  Thank you

  Dembélé George Jacob

  I got it

  Thank you for your support

  QString tourDiscHtmlString                        = tourSummary.value("tour_desc").toString();
      QTextDocument text;
      text.setHtml(tourDiscHtmlString);
      QString plain = text.toPlainText();
     tourDescriptionTextArea->setText(""+plain+"");
  

• Set a default value for an attribute in modules - OPM

  Hello
  
  I'm trying to set a default value for a numeric attribute 0. I tried a few things but did not work.
  I was trying to default custom function that defines the default value of "0".
  I'm new to OPA, and I know not java.
  This is the java program that I intend to deploy as jar.but unfortunately it does not work.
  
  import com.oracle.determinations.engine.CustomFunction;
  import com.oracle.determinations.engine.EntityInstance;
  import java.util.Random;
  
  SerializableAttribute public class DefaultFunction extends CustomFunction
  {
  public Object evaluate (EntityInstance entityInstance, Object [] objects)
  {
  If (items [0] is nothing)
  {
  return 0;
  }
  }
  public Object requireKnownParameters (EntityInstance entityInstance, Object [] objects)
  {
  If (items [0] is nothing)
  {
  Returns false;
  }
  }
  
  }
  Is there any reference material where it has all the functions or the sample programs.

  Have you seen the article using developer?
  http://docs.Oracle.com/HTML/E29403_01/content/tutorials%20and%20Samples/Eg_Create_CF_to_Default_a_Value.htm
  This shows you how to use a custom default attribute (number) function. Maybe it's not 100% what you're after, but it might help.
  See you soon
  Ben

• Fault of DNS round robin to 2 connection view servers

  Help! We have recently improved view to 4.6 and have now 2 view connection servers (viewconnect2.wheatonma.edu and viewconnect3.wheatonma.edu) set up with DNS round robin. We have customers to enter the name "viewconnect.wheatonma.edu" and there are 2 records to change the name in DNS to what he (to the IP address of viewconnect2, the other to the IP address of viewconnect3). We found only intermittently when a View Client tries to connect they will get the following error

  "View server connection authentication failed. Initialization failed when connecting to the server ""https://viewconnect.wheatonma.edu:443' " "

  Because now we have just removed one of the mentions A name so viewconnect.wheatonma.edu just points to the IP address of viewconnect3.wheatonma.edu and everything seems to work well.

  I have the SSL from GeoTrust certificate issued for viewconnect.wheatonma.edu correctly installed on both servers, so I don't think that is the question.

  In View manager when I check the settings for each server under "Display Configuration"-> "Servers" here is what I got when I edit entry of each server.

  Viewconnect2 settings

  No Tags set

  Secure tunnel HTTP (S)

  External URL: https://viewconnect.wheatonma.edu:443

  Use Secure Tunnel desktop connection is checked

  PCoIP Secure Gateway

  PCoIP External URL: 155.47.24.11:4172

  Use Secure Gateway of PCoIP PCoIP connections to desktop is unchecked

  Viewconnect3 settings

  No Tags set

  Secure tunnel HTTP (S)

  External URL: https://viewconnect.wheatonma.edu:443

  Use Secure Tunnel desktop connection is checked

  PCoIP Secure Gateway

  PCoIP External URL: 155.47.24.12:4172

  Use Secure Gateway of PCoIP PCoIP connections to desktop is unchecked

  Am I missing something? Is DNS round robin is not supported for the connection view servers? The firewall is disabled on the connection view servers

  Thank you

  The problem is that your "External URL" settings are wrong.

  These must represent URLS that get directly on the specific login server and cannot be load-balanced or go through a round robin DNS entry.

  Set the external URL:

  Viewconnect2 https://Viewconnect2:443 or https://155.47.24.11:443

  Viewconnect3 https://Viewconnect3:443 or https://155.47.24.12:443

  This way your connection secure tunnel will go to the same server connection as was chosen by repeating alternating DNS or load balancing.

  Your users always enter https://Viewconnect:443 the view of customers.

  There is an example here http://communities.vmware.com/docs/DOC-14974

  Select this option.

• I am trying to set up my new iPhone 7 more but it says SIM necessary?

  Im trying to set up my new iPhone Plus 7 but it says "SIM" required?

  You must use a sim card to activate the iPhone.

  Don't you have a?

  Where did you buy this iPhone?

  Has not chosen a carrier when you purchase it?

  Don't you have a cellular carrier that you want to use iPhone with?

• message: configuration cannot be verified - is the user name and password? None of them are wrong. I'm trying to set up my work email. How to solve the thi

  I have been using Thunderbird for a long time. One day he told me that my password is incorrect. After several attempts, the correct password decided to remove the e-mail account and start to charge. Now, when I put the account it says "configuration could not be verified - is the user name and password? None of them are wrong. I tried to change the password, contact my email provider and everything works fine except when trying to use Thunderbird. The email that I had tried to set up is at work. Any help in fixing this will really appreciate it.

  The best suggestion is to get the correct settings from your provider. They move to the top of their servers. They know the settings that work.

• I just installed ios 9 today and tried to set up "Hey Siri" on my iPhone 6 Plus.  I have the phone on and said "Hey Siri" so many times that I am blue in the face.  He just telling me "Sorry doesn't quite have that." Try again. '  I have a

  I just installed ios 9 today and tried to set up "Hey Siri" on my iPhone 6 Plus.  I have the phone on and said "Hey Siri" so many times that I am blue in the face.  He just telling me "Sorry doesn't quite have that." Try again. '  I also tried to reset the settings of the phone under the "Reset" option and again without success.  Everyone knows the problem?

  Not having is not the issue here.  Have you tried to ask a question after Hey Siri? Should really wait that long either.

• Why is the recommendation "Do not set a public DNS server in TCP/IP from DC settings."

  Read best practices for DNS on DC and domain member client settings suggests that you should;

  • Contact your ISP and get the DNS IPs validates them and he adds forwarders, do not set a public DNS server in the TCP/IP from DC parameters

  I just wanted to ask why this was the case, is it a security issue?

  Regards, Paul

  Hello

  Please see the following thread: http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/bd340926-854a-4725-a967-0ebd6155718b

  Hope that answers your question :)