For Camileo H10 SD card

Hi all!

I just got a * Toshiba Camileo H10 * and would like to know is it would take a 32 Gb SD Card. If not, what is the maximum I can develop?
Also, is there any particular specification, I need to keep in mind about the SD card?

Thanks in advance for your support!

HL

Hallo

AFAIK that Camileo H10 supports cards up to 8GB.
It should also supports SDHC cards (Secure Digital high capacity).

Good bye

Tags: Toshiba

Similar Questions

  • Camileo H10 - SD card that I can use?

    Hello world

    I'm new to Toshiba products.

    I just bought one of your cameras film (Camileo H10) and I can't find any help online.
    The questions I wanted to ask you were,

    (1.) what class (for speed) of the SD card allows the camera.
    2.) is there somewhere I can fill my warranty online

    Hello!

    The cards that you can use are mentioned in the user manual normally.

    I have good experiences with Kingston and SanDisk cards. I use every two years and never had problems with both.

    Good bye

  • Update of firmware for Camileo H10 gone bad

    Hello
    I got a Camileo H10 camera and wanted to do the firmware update, but something was wrong, I can't say what exactly.
    But now the camera doesn't even start. The only thing I see is the little red light at the front. But the monitor won't start... What is there that I can do, like reset, or something? Or is he now ready for the garbage? Would be a shame...

    Hello

    I m not a Camileo H10 owner but have you tried to remove the battery? Remove it and wait an hour. Now, reconnect the battery and try it. Maybe it works.

    If this isn't the case, I'd go for the authorized service provider nearest. Technicians can check the camera and fix it.

    Good luck!

  • Camileo H10 - White Balancing does not work

    I bought this recorder in December 2008. I tested some records inside, outside and I found, that White Balancing does not work.
    I can put it in automatic or manual, but all videos are little pink. Is this a firmware problem or is it a bad piece? Where can I get the new firmware?

    Thanks for the reply

    Hello Bunak

    Toshiba has released the new update and you can find it on Toshiba support and download page under http://eu.computers.toshiba-europe.com > support & downloads
    On the drivers download page please choose the criteria for follow-up:

    Product type options
    Family digital Imagin
    Range of digital video cameras
    Camileo H10 model
    OS operating system practice
    Type of driver Firmware update

    So here you can find the update to Firmware version 1.1. Last modification date is 12/02/08.

    In order to provide the best quality, update Firmware for Camileo H10 results with feature upgrade as follows him.

    1 give input MIC (improve the volume of MIC)
    2. set the focus window (improve the AF)
    3 tune AE to avoid exposure
    4 tune matrix color and saturation (performance of color)
    5. set the noise filter (improve the noise level)
    6. grant WB (improve the AWB)
    7 change the string from the user interface in CZ

    Here the steps how to upgrade the F/W (Firmware):

    First of all, there are two different language version of the UI (User Interface) of the EU & UK and EEMEA version. Please select the appropriate according to your language file instead.

    -EU & UK F/W version 1.1 include: English, Deutsch, Español, Português, Italiano and French, Dutch
    -EAST F/W version 1.1 include: English, Czech, Greek, Hungarian, Polish, Russian, Turkish, Slovak

    * Files of F/W 1.Copy to an SD card *.
    -Format SD card. Make sure that the FAT file system is selected before formatting.
    -Copy the F/W (zburnT_C10.run.elf and DCIM folder) files in the root directory of the SD card
    (PS: there is another folder and file in the DCIM folder, please, do not change the content of this)
    DCIM folder)

    * 2. Firmware Update (Please make sure of course he didn't is no battery inside the unit and the power adapter is not connected to the camera) *.
    -Open the Panel first
    -Insert the SD card which has the F/W files
    -Insert the battery (make sure that the battery is full), then plug the power adapter to the camera.
    -Press the shutter button when the message press shutter to update to start the update process. During the F/W update of the LED will keep flashing. Do not remove the battery or disconnect the AC adapter during this operation, otherwise the camera will be damaged.

    * 3. Update has been completed *.
    -The LED will stop flashing once the firmware update completed (Please make sure that the flashing stop light)
    -Restart the unit remove before adapter, the battery and the SD card in camera in order to avoid the firmware update again.
    -Upgrade of the F/W was over.

    Please follow these steps and let me know if everything is Ok now.

    Good luck!

  • Question about the class of a card SDHC for a Camileo H10

    Hello
    I have recently purchase a Camileo H10 and I want to know what happened if I use a SDHC class 4 card.
    He decrease the perfomance of the camcoder?

    Than you.

    It depends on the video bandwidth.

    Class 4 = 4 MB/s minimum.

    If the video stream is greater than 4 Mbps, there may be a performance issue.

  • Camileo H10 does not write the files to SD card

    Hello

    I bought a Camileo H10 in December. It's a nice cam, but sometimes I record video in HD format, the file will not be stored on the SD card.

    I tried a class 8 GB 2 and one of 16 GB class 6 SD card. This problem strongly deformed, when I record a video not the first time in the life cycle.

    Another problem is, on the videos, the audio stream is fast. When audio is played, the images run 10% longer than the audio.

    Someone knows, there is a firmware update?

    Thank you

    Stefan

    > sometimes I record video in HD format, the file will not be stored on the SD card.
    First of all you must check if the SD card is not locked SD card supports a lock that you could not format the SD card or store something on this map.
    In addition you should take a look in the user manual and need to check what SD cards are supported!

    > Another problem is on the videos, the audio stream is to fast. When audio is played, the images run 10% longer than the audio. Someone knows, there is a firmware update?

    Why you need a firmware update? Don't you think that it is a firmware issue?
    I think that this has nothing to do with the firmware or a cam problem.
    My father has a HD cam and this issue appeared also with video recording high definition.
    The problem is that your video needs to be converted and you have the right codec

  • Camileo H10-auto shut-off

    Hi all

    I recently (like, a few days ago) bought a Camileo H10 camcorder and I have a few problems with the following: apparently the camera turns off after a certain period of time without any user interaction, + it is record +. Now, I know that its got one-setting auto power off function of which it turns off after 3 minutes without any button presses when it does not, and is not a problem. But IMHO it should just disable itself while it's video recording, even if there is no entry user for some time. Worse still, when he does this, he is not even save what she had registered so far. It just seems to lose ALL the data that she had recorded.

    This happens after about 20 minutes of recording, or more and makes it pretty hard when we want to check us for a long time (ish) without a person to act the role of the cameraman... Now is this a problem with the type of SD card that I use (is a no name brand, but he says "class 8" there, and if the class 6 is 6 mb/s then class 8 should be 8 mb/s and therefore even better, shouldn't it?) or is it a 'feature' to save the battery, and if this is the last is it possible to disable it?

    Thanks in advance for any response

    It shouldn't power off during recording, while there might be a hardware problem that requires a repair. Maybe the battery is worn out? How old is the battery?

  • Camileo H20 - can I use firmware of the Camileo H10?

    Hello

    Is it possible to use the firmware for H10 och the H20? (a response, probably not)

    * If not, when a firmware for H20 come out? *

    Hello

    Unfortunately, I doubt that this will be possible. I mean Camileo H10 and H20 are different, so I think another firmware will destroy the cam and will not work.

    I think you have to wait until a new firmware will be released but why do you want to update the firmware? Do you have questions?

  • Camileo H10 - jerky video / flash still fires twice / blurry photos

    Hi please can someone help or advise. I recently bought a Toshiba Camileo H10 digital camcorder and have had some problems with it, I hope someone can help me solve them. First of all, let me start by saying I already updated to the latest firmware from a link someone posted on this firmware, it makes no difference to my questions.

    1. the video is very choppy (stuttery?) and it is most obvious when panoramic autour or zoom in and out. It's worse when you run at higher resolution (HD) and even worse when I turn on the image stabilizer. DV to my laptop from my 10 year Sony digital-8 camcorder video that I captured via a cable are much smoother than the video files I get card memory of the Camileo, with not a lot of difference in the quality. I can do to make it smoother?

    2. when I take a picture in normal flash mode (NO red flash mode) the flash fires twice, and he takes the photo on the 2nd flash... as if it was always flash red-eye mode. There is a delay of about 2 seconds between the flashes, i.e. at the point where the 2nd flash occurs, the subject has already taken the photo was taken and leaves. It seems that he is stuck in mode double-flash red-eye. Yes I certainly change it to red-eye flash in "normal" mode. It does automatic flash mode too. How can I make the camera only trigger the flash once, normal flash mode?

    3. I find it almost impossible to take a photo that does not suffer from blur, regardless of the lighting conditions. Trying to get a clear picture inside (flash enabled or disabled) is almost impossible, and most images outdoors in broad daylight are too blurry. It is impossible to try to get a picture of someone ' one/something thing that moves. It is obviously something to do with the length of exposure, I fixed it to automatic and have tried to change, does not have much difference (and I do not accept the duty to play with the settings, whenever I wanted to take a picture anyway...) It should handle and automatically adjust properly). Anyone know how I can get sharp pictures?

    Thank you very much

    Milo

    Hi guys

    I found this thread on Camileo H10 and the new firmware update:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40630&TSTART=0

    Please check because the new firmware update brings new features and improve the quality of the picture, too.

    These are improvements that are provided with the new firmware update:

    1 give input MIC (improve the volume of MIC)
    2. set the focus window (improve the AF)
    3 tune AE to avoid exposure
    4 tune matrix color and saturation (performance of color)
    5. set the noise filter (improve the noise level)
    6. grant WB (improve the AWB)
    7 change the string from the user interface in CZ

    Good bye

  • AC adapter Camileo H10

    Hello

    I lost the original power adapter for my Camileo H10, which allowed me to recharge the camcorder and use it at the same time. Who can tell me where to buy another?

    Thanks in advance.

    Tom

    Hello

    Usually, you could charge the camcorder battery wihtou the use of an external charger.
    If the camcorder is connected to the computer laptop s USB port, they should automatically reload. Check the user manual.

    But of course, you can recharge the batteries out of the TV.
    Search for it * PA4082E-1CHG * part number.

    It is a battery charger for Toshiba Camileo camcorder

  • Re: How to get a refund for an iTunes gift card

    I have $20 for a game that I bought a gift card, but when I buy the application/game it tells me I have insufficient funds and wants to put me in the information of credit card or redeem a gift code that I have already bought. The problem is that I have enough credit, and he's trying to me to put in a code that is already in use.

    Its like the "you must connect disconnect." Situation a bit please connect to log out. ». My mother bought me a gift card for $20 that I can't use. It's outright theft, and Apple will not give us a refund for fraud issues, when Apple is the one that scam us. If they did do that, we would not ask for refund.

    More I'm going with Apple and more I don't like it.

    How to get a refund for an iTunes gift card?

    < published by host >

    What is the price of the item you are trying to buy? Depending on what country you are in you may need to add sales tax to the price of the article - if that takes the price on your balance that you'll either have to redeem another gift on your account card, or add a payment method valid to cover the additional amount necessary to purchase this item.

  • How to make a model for a quarter fold card

    How to make a model for a quarter fold card - horizontal and vertical format

    HI Mickey,

    Check the file > new file selector model to see if your version of Pages offers card models. This began as a two "single fold" card on US letter in landscape orientation.

    The model included three pages. Page 1 Page 2 inside, outside, and the third was a blank page. Only Page 1 was included in the original document.

    I started by the insertion of a page inside, containing two of the big text box below.

    Back to Page 1, I chose an image returned vertically then horizontally, then repeated this procedure with the text box that contains "Thank You".

    I traced the two objects, then moved inside page, placing the pair in the upper left corner.

    Inside page, I removed the text in the box on the left and replaced by "left inside,"a label to mark the position of this section in the final map. "

    I added a text box, entered 'Back' returned vertically then horizontally and dragged to the position shown.

    Save the result as a model.

    Using the same document, I went to file > layout and changed the landscape to Portrait orientation.

    Do drag the blue guides to the indicated positions, then reshape the elements to fit the new space.

    Save the result as a model (with a different name of the above registered version).

    Kind regards

    Barry

    PS: Executed using Pages ' 09.

  • Qosmio X 300-126 - driver for FN keys and card reader

    Hi guys,.

    I have improved my Qosmio X 300-126 to win 7 and installed all the drivers (from the toshiba site) and updated my bios and the optical drive (dvd drive) and the thing is that

    Flash cards only works with the mouse and no keyboard shortcut! as the FN key is dead but worked fine in vista.
    And the other problem is that the reader of card don t work, which I think is the "unknown device" that I have in the Panel and devices don't know how to fix this problem.

    Help, please.

    Hello

    > Flash cards only works with the mouse and no keyboard shortcut! as the FN key is dead but worked fine in vista.
    I had the same problem after upgrade to windows 7, but the solution is pretty easy: just install the latest Toshiba Value added Package and Support Utility for Windows 7 Flash cards. If it s is not no for Windows 7 on X 300, just search by Satellite L500 and download them it worked for me! :)

    > And the other problem is that the reader of card don t work, which I think is the "unknown device" that I have in the Panel and devices don't know how to fix this problem.
    You need to download card reader driver. You can find it on the Toshiba site too. :)

  • Poor image quality on HDTV recorded with the Camileo H10 video

    I recently bought the Camileo H10 camcorder that records 720 p hd video.

    When I connent it to my 40 "hdtv via the hdmi cable, the video is all Boret and not very targeted.

    I check the settings of the TV and the camcorder and both seem fine.

    If anyone has had the same problem / help me?

    See you soon

    What HD TV brand/model is it? It is capable of a progressive signal 720? Or is it only able to 720i (interlaced)?

    Have you tried a lower resolution on the patricialebiangoetschy?

  • Satellite A100-225: need for HDD upgrade PCMICA card reviews

    Hi, I have this laptop:

    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=116145

    I am interested to do an upgrade of the disk using a PCMICA Cardbus Card.

    What version of card is recommended for this computer and serial ATA version too?

    I have a standard for this PC PCMCIA card slot and an Express Card slot. There are also a number of contradictory versions of SATA. Can you guys recommend a specific map and a specific brand that would be best suited to this system?

    Hello Raid

    I might have a bad day today, but I didn't understand what you want to do exactly. Can you please send a link where I can see what card you want to use?

    You want to use the external HARD disc or what you mean exactly with the PCMICA card to upgrade the HARD drive?

Maybe you are looking for