Satellite A200-TH7 - Windows Explorer not responding

Similar Questions

• I am not able to open anything that uses Windows Explorer and get the message as Windows Explorer (not responding)

  Original title: I'm not able to open anything that uses Windows Explorer

  I'm not able to open anything that uses Windows Explorer.

  When I try to open: My Documents, Control Panel, any Office application, etc. - the window remains empty and said "Windows Explorer (not responding)."  My desktop icons are filled and I am able to open the Task Manager.

  Any help is greatly appreciated?  Also, I'm not a technology person, so please be very percise.

  Thanks in advance.

  Thanks for the help.

  I had installed the update of MS Windows Defender KB915597.  After doing a restore to the point of restoration, taken at the time of the update, I am now able to open Windows Explorer.

  Seems that something in this update does not work with my system.  I have had no other problems with Windows Defender updates in the past - it was the first.

  Thank you.

• Error when you try to activate Microsoft Outlook 2003: 0 x 80042108 and error of Windows Explorer: Windows Explorer not responding

  0 x 80042108

  I am trying to activate Outlook 2003 with Vista and I got the following error message: 0 x 80042108.  He managed to find Gmail, but couldn't connect.  Vista is not compatible with gmail?  I have a problem with the Windows Vista Explorer I get a "Windows Explorer (not answer) message - very frustrating."  Any suggestion or help out there?  Thank you!

  This is a reply by Narasha Dsouza, MS Support, moderator
  Date: December 9, 2010.

  http://social.answers.Microsoft.com/forums/en-us/outlookacct/thread/2a80ee74-6552-4618-8325-586b8f563ff7 For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Explorer not responding

  At no time this happens... when I try to click on anything on the taskbar I get "windows Explorer is not responding" and gives me the choice to shut down, restart or wait... reguardless of the option that I choose my volume and network icons always disappear.  I have to restart my laptop to get back them and make things work properly.  Is no time until the problem recurs.  I am running Windows Vista Home Premium with Service Pck 2.  Can someone help me please.  I have read some other questions similar to mine and found a response that said to run an analysis system from the command prompt and I am doing that, but there is no instructions on how to proceed after running the analysis.  I typed in the sfc/scannow... Help!

  Hello

  Was it an error that you got after you run the sfc/scannow?

  If yes then please let me know.

  It is best to run a resrore system to a date when the computer was working fine without error:
  http://support.Microsoft.com/kb/936212

  All the best!

• my Windows Explorer not responding

  I saw a folder compressed zipped into my new pc windows 8.1 with internet icon on this topic because I have a right click on this folder and open it in a new window, it stops responding. I restart my pc bt it doesnot work, until then when I opened the desktop it shows that file with Explorer zipped folder.

  Please tell me its solution and why it happens...

  Hello najoua Kumar,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it all change important before the show?
  2. Do you receive an error message/code when opening that file zipped?
  3. You are connected with an account administrator or standard?

  If so what opening zipped folder file explore crashes while there might be a chance that some system files are missing or your computer may be affected by some virus/malware. I suggest you to try the methods provided below and see if it helps you to solve the problem.

  Method 1

  I suggest that you start the computer in safe mode and see are you able to login in safe mode or not. You can see the article mentioned below to start the computer in safe mode.

  Start settings for Windows (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If your computer works fine in safe mode and it is not get crashed, I suggest you perform the clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2

  If the problem persists, I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.

  Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 8.

  1. Press Windows key and X at the same time.

  2. Choose line (Admin) command on the shortcut menu.

  3. At the command prompt, type sfc/scannow and press ENTER.

  4. Exit the command prompt.

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Method 3

  I suggest you to run security software and check if your system is affected by viruses.

  The Microsoft Safety Scanner free is a downloadable security tool that allows analysis at the application and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Ultimate Windows: Explorer not responding

  Windows Ultimate: Lately, every time that I right click a folder or a file in a folder, it takes between 12 to 15 seconds to respond with my options (Explorer copy, delete etc...). It is used to respond instantly. What can I do? Thank you

  Hello

  1. don't you make changes to the computer until the problem occurred?

  Method 1: Diagnose and repair Windows files and folders problems automatically: http://support.microsoft.com/mats/windows_file_and_folder_diag/

  Method 2:

  Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3:

  Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• Is problem with Windows Explorer (not Internet Expl.) - possible to reinstall this software or update?

  I have several problems which, after some time, can be attributed to a problem with the Windows Explorer (not: Internet Explorer)

  Examples:

  -files are not finished (so that they remain in a queue forever) (this happens every time)

  -When I try to replace a file from one directory to another this process is at a standstill (occurring rarely)

  -When I shut down, I get a message that trying explore but unable to play the fine tune (sometimes)

  -in Word, I get printer messages not responded or other problems with opening files-Word (sometimes).

  Remarkable (?): boot in normal mode is always successful, even after the crash on shutdown.

  Question:

  -is it possible to reinstall this software or update?

  - or something is needed to get a solution?

  Hi Niels,

  1. When did you start to question?

  2 did you recent hardware or changes to the software of the system?

  Method 1:

  Step 1:

  You can check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, then you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.

  Method 2:

  If you are faced with the question in safe mode, you can run a Checkdisk to see if there are drive errors that can cause this problem.

  Check your hard drive for errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• machine freezes, slow start, apps to open slowly, the login window is not responding

  I had a problem with my macbook pro for a while now where the machine becomes completely insensitive and I pressed the power button to restart. I already posted about this problem and although the answer was very helpful, I did not understand 100% how to solve the problem and since that time, the thread is not answered. Please follow the link to the thread below and I hope someone can help me more. now, he becomes desperate enough that it happens more and more frequently. Sorry, repost and old thread but I don't know what to do and I don't want to replace my laptop if I do not.

  Thanks in advance

  machine freezes, the login window is not responding

  Link Davis is one who can read this report. How much memory you have installed? Could you run an EtreCheck and post it.  http://www.etresoft.com/etrecheck

• Accidentally deleted Windows Explorer (not Internet Explorer)

  Looking for a way to download or restore of Windows Explorer (not Internet Explorer).

  First of all, in response to the first question below on the race "explore c: /" when I did that, the local directory c: came. Should I do something more about it? I still hope to restore Windows Explorer.

  What you have proven this response is that Windows Explorer is still there and still doesn't work as it should for any aspect you gave (although again, just the startup and power use Windows, see your desktop, etc turns works in Windows Explorer.)  What I'm saying is that there is nothing to 'restore' in have you seen/shown so far.  You have a Windows Explorer.

  If there is something specific, you can say is missing, maybe we can help.

• Satellite L300-215: windows Explorer does not respond after recovery

  Hello

  I got a blue screen - don't know what error message was and then stop.
  I realized the recovery process to return to output from the computer in the box, but when I start I only go as far as office and then "windows Explorer is not responding".

  Anyone have any ideas?

  Also if it is a disk failure hard can easily replace the hard drive and the boot of my recovery disks

  Ta

  > Also if it is a disk failure hard can easily replace the hard drive and the boot of my recovery disks
  Yes, easy to replace the HARD drive.
  It takes a HARD drive 2.5 SATA for this laptop.

  But I recommend that you check the first HARD disk using a tool called Drive Fitness Test... Use google to get this software

  Here are a few examples how to replace the HARD drive on the different laptop models:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=116

• Satellite A200 - eblib.dll is not designed to run on windows

  My laptop Satellite A200 started giving me warnings saying * eblib.*dll is not designed to run on windows or it contains an error.
  The file has been deleted with combofix c:\programdata\xp.

  I need this file?

  I checked with McAfee and Alvira antivirus plus several spyware and the laptop seems to be clean.
  I had the same problem with odbc32.dll. Replaced by a copy from another computer vista laptop successfully.
  This file is needed?

  The only info I have found says he is Compal Electronics, but does not say what he does or what component it uses.
  Could someone send me a copy of this file, please!

  Help
  Thank you

  Hello

  I discovered that eblib.dll belongs to EBLib of COMPAL ELECTRONIC dynamic links library.
  To be honest I have never heard of this software on Toshiba laptops so I think you can remove or uninstall the system.
  Also clean the registry with CCleaner several times

• Satellite A200 - FN keys do not work after upgrade to Windows 7

  I recently updated my A200 to Windows 7 32 bit. Since upgrading my FN key no longer works. I can't find the correct driver.

  Anyone having the same problems? Or anyone with a solution?

  TKS
  Praepositus

  Hello

  The fact is that not all the models Satellite A200 with Win 7 drivers released.
  Technical support VAP utility and flash card is important.

  Added value package was released for most Toshiba laptops
  Card Flash Utility is available only for a single series.
  For example, Sat L500 contains Flash Cards Support utility download and install it!

  He that will not help so I doubt that you will get the FN button work

• Satellite A200 - 23K - card SDHC not recognized on Windows 7

  Hello, I have a toshiba satellite A200 - 23K.
  I just installed Windows 7, all drivers support drivers toshiba and all the updates of microsoft windows, including the suport of 32 GB SD flash cards memory.
  http://EU.computers.Toshiba-Europe.com

  But in the Device Manager there is a witch of the element named "mass storage controller" has not been installed (which would be the SD card reader), but I didn't know any driver for "Texas Instruments PCIxx12 Integrated FlashMedia Controller" and installed the VISTA driver instead. Now, the look of the device is fine in Device Manager, but he only read a normal SD card, and when I insert a SDHC 4GB it came to nothing. In windows XP / vista and linux (fedora / ubuntu) there is no problem with SDHC (4GB and 8 GB Kingmax SDHC class 6).

  I would very much apreciate in advance if someone will make a driver for the card reader (I use it pretty mutch for photos).

  Hey Buddy,

  I think the problem is the Vista driver expired that doesn t work 100% correctly on Windows 7

  As much as I know Satellite A300, which supports Windows 7, is also equipped with Texas Instruments card reader, or at least the pilot is also from the same company with respect to the Satellite A200.

  In your case, I would try this driver, I hope it works! :)

• Satellite A200 PSAE3: Windows XP Home edition do not recognize the modem and sound card

  Hi all!

  I can't understand what is the problem with my Satellite A200 (PSAE3)... I downloaded all the files on the right of the Toshiba Download Center, updated the BIOS to WXP but XP still not find any sound card or any modem. He isn't finding a device with a "?" question mark on this...

  There are so many different drives, I tried, but no one has changed the situation...
  Anyone has any advice?

  Thanks in advance,

  ciroopi

  Well, I found the solution to the problem! :)

  so, I write these verses down for anyone who might know the same problems:

  as usual, strictly follow the 'Toshiba A200 Installation sequence' found on the TOshiba driver download page.
  as he [I jumped no useful installation programs]

  I advice restart you each time you install a component, in order to have under control the whole Exchange.

  1 Windows XP Service Pack2 (RTM) - of course ;) -.
  [...]
  DirectX V9.0c 5 (SP2)
  Windows Media Player 10 V10.00.00.4036 6
  [...]
  10 Microsoft .NET Framework V1.1.4322 (SR1)
  11 Sun Java 2 Runtime Environment V1.6.0
  12 Intel ICH8M Chipset utility V8.2.0.1014
  13 Intel VGA driver 6.14.10.4833 965GM

  Note that driver VGA, the ATI we too, was also a difficulty - in fact, I don't know what it would have done - for the AUDIO sound card.
  You may have read in the installation dialog box.

  Moreover, I do not know if you must install the sun java, .NET framework and WMP version that displays the list, versions that are OLDER than the most recent, but just to be sure, download the form versions THAT NET.

  at this point, you should see "unknown PCI device" in the unknown devices in the system control panel.

  14 Realtek ALC268 Audio Driver V5.10.0.5433

  for realtek, I suggest you download the driver from the zip from the realtek download page; Once extracted from the latest version for desktop or a temp directory, I suggest to install before all the patch KB888111 you might find in the \WDM_Rxxx\MSHDQFE.

  then restart.

  for now, you should not see the "unknown PCI device" no more where it was before, but under the "system devices", like her, where you could also end the "Intel PCI Express Root Port", "Pci Bus" and so on [ja? m saying this to you because ja? m Italian aid of XP, and I don't remember the exact English names...].

  Now, install the audio drivers by using the setup.exe that you find in the \WDM_Rxxx directory.
  It should reinstall the kbfix and install the new drivers.

  Reset.

  After the reboot, nothing happens, but...

  .. see the "unknown pci device" menu - here? m not sure the name but the one with the exclamation mark in the 'system devices' - select 'Properties' and then 'driver' and 'update driver'. Let XP find the NOT on the net. tell XP to look for "Video and Audio Controller, game" [you know, the English entry that usually stands for device audio and similar] and he must find a CORRESPONDING driver, which is the "MICROSOFT UAA BUS DRIVER for HIGH DEFINITION AUDIO".
  If XP don't select this driver by itself, you should look for "\windows\system32\DRIVERS\hdaudbus.sys".

  After that, XP automatically detects ALL audio devices and install the correct drivers.
  In addition, it now the entrance to the modem, modem to install the separate driver, that we could find in down in the "list system", like her, on the Toshiba download page.

  So, hope this helps!

  See you soon,.

  Francesco