USB drivers for HP50g on Windows 8 (64-bit)

Similar Questions

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• Satellite L500-1 - where to find the drivers for XP and Windows 7?

  For me, are necessary for the driver to L500-1. On a site not found. If it is a good idea to use the driver other model of what to write.

  To me, the driver under Windows XP, Windows 7.

  Hello

  I searched a bit on the Toshiba site and it seems that your model is part of the PSLJTE series and as a result, you can download all the drivers for XP and Windows 7 here:

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite L Series > Satellite L500 > PSLJTE

  Check this box!

• Envy TouchSmart 20: Need USB drivers for HP Envy 20 which was lowered from Win8 for Win7 64 bit

  I need USB drivers for a craving 20 TouchSmart, which was lowered from Win8 to Win7 64 bit. The Device Manager has the following information:

  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C & REV_02
  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C
  PCI\VEN_104C & DEV_8241 & CC_0C0330
  PCI\VEN_104C & DEV_8241 & CC_0C03

  Thanks in advance to anyone who can help

  Hello:

  This driver should work...

  Texas Instruments USB Controller Driver

  File name: sp70786.exe

• Try to get a USB cable to installed on Windows 7 (64 bit) series.

  I try to get a USB cable to installed on Windows 7 (64 bit) series. Radio Shack model: 26-949. The cable works fine in XP. I tried Radio Shack, FTDI drivers prolific, but to no avail. When I try to load the drivers, it does not recognize the device. When I plug in the device, instead of motorhomes up as a COM port, it appears as "another device-USB-Serial Controller." I completely restored Windows (re-formatted hard drive, reinstalled Windows), but none of the drivers I found works with Windows 7 (64-bit).

  Hi BUBBA211,

  Thank you for using Microsoft Windows forum.

  Check if your USB device is compatible in the Windows 7 Compatibility Center : http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

  Doesn't seem to be compatible with Windows 7 64-bit edition.

  Contact the manufacturer because they are the best people to answer your question.

  In the meantime, run your USB device compatibility mode.

  Follow the steps from the link to the older in this version of Windows programs : http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-of-Windows
  Hope this has helped
  Aziz Nadeem - Microsoft Support

• Where can I find display driver for satellite A200 Windows XP 32-bit PCAECE

  Where can I find display driver for satellite A200 Windows XP 32-bit PCAECE? Help!

  Hello

  Most of the A200 series made use of this video card chipset.

  [Intel (r) Graphics Media Accelerator Drive X 3100 | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml & sliceId = & dialogid = 57594450 & stateId = 1% 200% 20 57598302]

  Hope this will help :)

• Download display drivers for hp pavilion dv9000 on vista32 bits

  How can I download display drivers for hp pavilion dv9000 on 32-bit vista operating system

  How can I download display drivers for hp pavilion dv9000 on 32-bit vista operating system

• Reinstall the USB drivers for laptop G62-367DX operating system windows 7?

  Hello!! I recently got a HP G62-367DX laptop about a month and half ago and a mouse without a wire about two weeks later. The mouse no longer works last week and tried to put his receiver in other ports usb with no luck there. I also tried to do a system restore and uninstall usb drivers and then by using the device driver to find the hardware changes defective. The only thing I got was an error indicating that the software device driver has not been installed successfully. Is it possible to manually install the drivers I need, or is it a problem of operating system that may require a reinstall of my OS? I would greatly appreciate any comments. Thank you.

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).

• SM Bus controller and controller USB drivers for Pavilion P6 - 2307 has

  Hello

  I am trying to find the drivers for SM Bus controller and USB controller for the Pavilion P6 - 2307. If I go to download drivers and download updates, it does not install it. I run Windows 7 64 bit and I made sure I downloaded the correct drivers.

  At their launch, Windows 7 comes in asking if the run installation program correctly which means that somehow it didn't. It then asks if you want to run it in compatibility mode and if I say yes, nothing happens.

  Can you get it someone please let me know where I can find the correct drivers to make it work on Windows 7 64 bit.

  Thank you

  SAJ

  Hello

  Please use the following driver for SM Bus controller:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 5037949 & prodNameId = 5037951 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-88640-1

  and what follows for USB:

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56138.exe

  Kind regards.

• SMBus and usb drivers for Pavilion P6-2312ea running Win 7 x 64 3

  Hello

  My step daughter has finally threw his arms up in the air and agreed that win 8 is more pain on a desktop that is worthwhile and is not for her.

  We have installed Windows 7 64 bit and are now just trying to find the compatible drivers for SM Bus controller and usb 3.0.

  I'm assuming that the drivers for usb 3.0 as the keyboard and mouse are ok, just the 2 front usb 3.0 do not work (although that seemed to have given up after a week).

  We executed the 'original' pilots when he was running Win 8 x 64, but they don't seem to have. Maybe a compatibility problem, can be me as it was very early this morning when I gave up for a while.

  Any help/pointers gratefully received

  TIA

  Elmer

  Hello

  Please check the following post:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/SM-bus-controller-and-USB-controller-drivers-for-Pavilion-P6/TD-p/2814635

  Kind regards.

• HP J005AX: Lack of WIN 7 USB Drivers for HP J005AX

  I recently changed the operating system windows 8 on my Windows 7 ultimate 64-bit HP J005AX. I managed to get everything works except the USB ports. They appear in devices such as Manager with no driver. I tried the drivers for other models J005 but none doesn't (including windows drivers 8) works. Does anyone know if there is a driver that will work these or if any other work around

  Hello:

  You need these drivers...

  SMBus Controller: Installation and reboot.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127758_1

  Graphics: See if it works...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_146053_1&swEnvOid=4058

  USB3: Install these two and restart.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_125616_1&swEnvOid=4058

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_123787_1&swEnvOid=4058

  Ethernet:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_143277_1&swEnvOid=4058#tab1

  Let me know what model wireless network adapter has your model and I'll post the link to bluetooth driver you need.

  Post the hardware ID's for unknown devices, and I'll post the links to the drivers, you need for those too.

• Help! Need the USB DRIVERS for my HP G6-2123us 3.0!

  Did a fresh install of windows 7.

  Went to the pilot site could not find drivers for USB 3.0 for this computer.

  They worked before I did a new install.

  This laptop has usb 3.0 ports so please help me!

  Thank you, Lawrence

  Hello

  Well, you asked for USB 3.0 driver but actually NOT. The use of the fix to SM Bus controller would help:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?rule=60443&cc=us&DLC=en&LC=en&OS=4063&product=5273777&softwareitem=ob-116222-1&sw_lang=

  Then, install the above to USB.

  Kind regards.

• How can I install usb drivers for win98 or win98se without cd player?

  I have an old laptop Dell Inspiron 3000 in my closet I have desided to fix so I have downgrated for win98 winme and I can't find the usb drivers?

  and I don't have a cd burner or a dvd burner! Please give me drivers win98 and win98se =)

  Hi TheTechKid607,

  Windows 98 is a Microsoft product. There is no support available for Windows 98.

  For more information, refer to this link: end of support for Windows 98, Windows Me, and Windows XP Service Pack 1

  Hope the helps of information.

• Ethernet controller for devices drivers not install on Windows 7 (32 bit)

  Hi all

  Need a bit of help (Neo red) says

  No seriously, I'm ready VMware 7 and I converted my laptop to a VMware image running Windows 7 32 bit.

  Everything works as expected, however my ethernet (Nic) controller display Code 28. The drivers for the device are not installed.

  I installed VMware Tools and operating system selected for the image is Windows 7 32 bit. I also tried to update the drivers, however drivers are not found.

  All proposed would be appreciated.

  Please note that I printed my VMX file below.

  

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "7".

  memsize = "2048".

  MemAllowAutoScaleDown = "FALSE".

  displayName = "LPT - 3001.prime - uk.local.

  guestOS = "windows7"

  numvcpus = '2 '.

  Serial0.present = 'TRUE '.

  Serial0.FileType = "peripheral".

  Serial0.filename = "auto-detect".

  Serial0.AutoDetect = 'TRUE '.

  Sound.Present = 'TRUE '.

  Sound.FileName = "-1".

  Sound.AutoDetect = "TRUE".

  USB. Present = 'TRUE '.

  ethernet0. Present = 'TRUE '.

  ethernet0. AddressType = 'generated '.

  ethernet0. ConnectionType = "bridged".

  ethernet0.startConnected = 'TRUE '.

  Ethernet1. Present = 'TRUE '.

  Ethernet1. AddressType = 'generated '.

  Ethernet1. ConnectionType = "bridged".

  Ethernet1.startConnected = 'TRUE '.

  ide0:0. Present = 'TRUE '.

  ide0:0. FileName = "LPT - 3001.prime - uk.local.vmdk.

  ide0:1.present = 'TRUE '.

  ide0:1.AutoDetect = 'TRUE '.

  ide0:1.filename = "automatic detection".

  ide0:1.DeviceType = "cdrom-raw"

  MKS. Enable3D = 'TRUE '.

  vmci0. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  annotation = «»

  pciBridge0.present = 'TRUE '.

  Tools.Upgrade.Policy = "useGlobal".

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  extendedConfigFile = "LPT - 3001.prime - uk.local.vmxf.

  floppy0. FileName = "a":

  virtualHW.productCompatibility = "hosted".

  ethernet0.generatedAddress = "00: 0C: 29:26:12:9 d.

  Ethernet1.generatedAddress = "00: 0C: 29:26:12:a7.

  UUID. Location = "56 4 d 1f 86 ba a3 e8 bd - 15 34 17 36 26 12 9 d ea.

  UUID. BIOS = "56 4 d 1f 86 ba a3 e8 bd - 15 34 17 36 26 12 9 d ea.

  ide0:0. Redo = «»

  vmotion.checkpointFBSize = "134217728.

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  Ethernet1.pciSlotNumber = "34".

  sound.pciSlotNumber = "37".

  ehci.pciSlotNumber = "38".

  vmci0.pciSlotNumber = "39".

  ethernet0.generatedAddressOffset = '0 '.

  Ethernet1.generatedAddressOffset = "10".

  vmci0.ID = "908464797".

  ethernet0.linkStatePropagation.enable = "FALSE".

  scsi0. Present = 'TRUE '.

  Ethernet1.wakeOnPcktRcv = "FALSE".

  scsi0.pciSlotNumber = "16".

  cleanShutdown = "FALSE".

  Replay.Supported = "FALSE".

  Replay.FileName = «»

  USB:1.present = 'TRUE '.

  USB:1.DeviceType = "hub".

  ethernet2. Present = "FALSE".

  ethernet3. Present = "FALSE".

  ide0:1.startConnected = 'TRUE '.

  tools.syncTime = "FALSE".

  unity.wasCapable = 'TRUE '.

  USB:0. Present = 'TRUE '.

  USB:0. DeviceType = "mouse".

  doesn't matter - just add them to the end

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual