for loop nested within a while loop

Similar Questions

• For loop within a while loop

  I have for loop within a while loop... admission to the for loop N comes from the VI selection... the while loop I a condition essentially statement it stops just after to finish all the iteration in loop...

  Entrance to the N loop is bascially driven by a local variable... that's the problem Iam having:

  When I press the Start button to run the program... regardless of the output of the select VI is gives the N of the for loop, then the loop starts and then ends in place... and when the output of the select statement takes a different value (the N of the loop for) loop not work until I restart the program again... What can I do so that the for loop runs again for another value of N, the RUN program button is enabled.

  1. clean your diagram.  Style guides suggest keep the pattern of a single screen.  With a little effort, I was able to get your DB less than 1600 x 1000 pixels.

  2 then I can see (some) it happens all at once. This thing does nothing?

  3. local variables can lead to race conditions.  Output in Angle position may be a race condition, although is probably not what you wanted to do.  What does the wired local time at the moment present terminal meter? (Ooops! Two controls with the same name - which can be quite confusing as well!)  If you need or want two components of façade having the same text, use the legends.  Make the labels is different so the comic is more readable.

  4. having more than one Dequeue function on the same queue will lead to unpredictable results.  When an item is removed, it is removed from the queue and is not accessible to any other Dequeue function.  In parallel loops, you have no way of guessing which Dequeue will seize any particular element.

  5 use Boolean reverse instead of Select with wired False to true and true cable at the entrance to false entry. Better, just make the case of forgery in the structure of the case within the for loop the real deal. No required reversal.

  6. I was not looking for to determine the logic of the code within the structure of this case. It seems I could have posted a much simpler way to do this several weeks ago.

  7. use multiply from the Digital Palette rather than a node form multiply by 4 or 1.8. Uses less space BD and is much easier to read.

  8. as has been suggested, learn how to work the machine architecture and the State of producer/consumer.  They can make your life much easier.  Do not try to convert immediately to these models.   It's too much bite to at some point.  Learn how they work first.  Make a few simple examples.  Then rewrite this program in this format.  Probably faster than fixing what you have now.

  Lynn

• Is it possible to execute a loop For independently within a while loop in LabVIEW 2013?

  In my program, I want to run a loop For inside a while loop and run independently, at their own rate of execution.  A test, I wrote a simple VI with a while loop with 1 second calendar and in this I inserted a loop For with 3 of a second.  I created indicators for the two terminals of the iteration.  When executing the VI, I found the while loop waiting for loop For run N times before the while loop is executed again.  I also found that sometimes the first iteration of the loop For ends at 1 second instead of 3 seconds and the STOP button to complete execution of the While loop does not always work.

  This is the expected behavior. LabVIEW is the language of s DATA stream. If you want the curls to be independent, it can be data forcing addictive so use separate loops.

• Creating tables in a nested for loop

  Hi all.

  I was stuck in this problem for quite a while now and I still don't know how to continue. Some outside the entrance would be greatly appreciated!

  I'm doing the following:

  -Take an array of numbers, to check if they are within a certain range (e.g. between 2 and 4)

  -Build two new arrays: one with all the numbers that are inside the beach and the other with the rest.

  An additional condition is that the amount and value of the range conditions will change (for example, it could be between 2 and 4 only / 2, 4 AND 6 and 7 according to the entry)

  To treat this, I created two nested for loops - one that goes on a table that contains conditions of the beach and inside that actually go and check if the values are in the range. I think I did that part successfully, but the next part is confusing to me - how to actually create the tables separated within two loops for?

  My apologies if I did not explain it well. Another method to support this problem is I want to translate following LabVIEW:

  Ranges of table / / [1 5 7 10] exodus-> This means we want to divide numbers based on those who are in (1,2) and (4.5) against those who are not

  Table of values / / [2 3 6 11 3]

  EndOperationDelegate table / / array of values within the range
  Table outValues / / Array of values out of range

  for m = 1:size (ranges)

  for n = 1:size (values)
  If (THE NUMBER IS on the INSIDE of EACH RANGE)
  EndOperationDelegate = [EndOperationDelegate NEWNUMBER]
  on the other
  outValues = [outValues NEWNUMBER]
  end

  end
  end

  Sounds easy enough, but it gets so chaotic with Labview that I don't know what to do. I have attached a reference image - insertion in the array function is not in fact add to the table, it creates a new table. How can I save that for when the nested for the ends of the loop?

  I have seen a few examples with shift registers which lie in a loop and I couldn't successfully that transfers in my block diagram.

  Any help/direction would be greatly appreciated.

  Hello!

  See the following example to understand how you can create a table in the loop For

  

  In your case, you also can uce conditional terminal to create a table only when then located nearby. It makes the code much cleaner that the structures of the case

  Hope this helps, if not, let me know if I can help you!

  Marcin

• for loop in while loop

  To all,

  I have a question, I have a loop within a while loop. The loop runs and displays the log data. It seems that, until I have stop the while loop that log data display. It almost seems that the for loop runs until the while loop is stop.

  The following accessory is an example of what I have in my code. But the because the loop runs in this example. My code is the same idea, but the loop seems to run when I start my program with execution of climax. Otherwise, it runs once I left the while loop.

  All entries?

  Thank you

  Cosmica

  I tried your VI and there is nothing wrong the way in which it executes. Nothing happens until the second tab is selected and you press the 'off' button, date on which the loop FOR runs until the indicator shows a "9". In subsequent runs, again, it count up to nine, but it is so fast that you never see. For the observer, the indicator remains at nine.

  Of course you would see things a little bit better if you place the small waiting inside various parts of loops. At present, the VI consumes all CPU do nothing but turn empty loops for always while spending from time to time some nanosecods to iterate through the loop FOR. You also destroy your resource VISA with tunnels of default output, so the fence at the end probably will fail. Overall, the code seems too complicated for what you want to do. Do you really need to link a case control tab structure? Seems unnecessary. The for loop should run when the button is pressed, since this implies automatically that Your ' e on the second tab, you don't need to read the tab control. It's redundant!

• Capture of sequences of images - issues with nested for loops

  Hi all

  I've written a vi. to capture a number of images ("Image") and save these images, sent to a folder of my choice.  Each image is identified sequentially.  However, I would like to make a number of iterations ("run") of this capture sequence, such that each image file name would be "Filename (Run) _(Image_No).png", for example run 5, image 10 'Filename 5_10.png.  I tried a nested for loop for this but I have an error message 'Current asynchronous i/o Operation' (I have attached a printscreen).

  Can someone help me solve this problem?  Please find attached my vi.

  Sincere greetings and thanks,

  Miika

  Hi toto26,.

  Thank you for your response.  I solved the problem by using a sequence structure flat - file in the first image and all the treatment in the second.

  Kind regards

  Miika

• Nested for loops error

  Hi all members of the community, I am experiencing problem with pulling the attributes of an xml I created. I use nested for loop. Please kindly help me to solve this problem...

  Thanks in advance...

  Here's the code & xml...

  
  import flash.events.Event;
  import flash.events.EventDispatcher;
  import flash.events. *;
  flash.net import. *;

  var myXML:XML;

  var voiceOver: String;
  var startOffset:Number;
  var slideData:Array;
  var id_cont_array:Array = new Array();
  var id_textfield_array:Array = new Array();
  var id_image_array:Array = new Array();

  var myXML_Container_Length:Number;
  var myXML_textField_Length:Number;
  var myXML_images_Length:Number;

  var loader: URLLoader = new URLLoader();
  Loader.Load (new URLRequest ("dynamic.xml"));

  loader.addEventListener (Event.COMPLETE, processXML);

  function processXML(e:Event):void
  {
  slideData = new Array();
  myXML = new XML (loader.data);

  loader.removeEventListener (Event.COMPLETE, processXML);
  loader.removeEventListener (IOErrorEvent.IO_ERROR, loadError);

  myXML = new XML (e.target.data);
  voice-over = myXML. @ voice_over;
  startOffset = myXML. @ start_offset;

  for (var i: uint = 0; i < myXML.*.length (); i ++)
  {
  trace (myXML + 'slide');
  }

  
  myXML_List = myXML.children ();
  myXML_Container_Length = myXML.children () .length ();
  trace (myXML_Container_Length + "is myXML_Container_Length")
  myXML_textField_Length = myXML.containerss [0] .children () .length ();
  myXML_images_Length = myXML.children () .length ();
  trace (myXML.Child ("containerss") [3]. @ id.toXMLString () + "== myXML.containerss [0].") @ id; ») ;
  trace (.textfield myXML.containerss [0] [0]. @ id + "== myXML.slide.containerss [0].") ("@ id");
  trace (myXML.containerss [0] .textfield [1]. @ id + "== myXML.slide.containerss [1].") ("@ id");
  trace (myXML.containerss [3] [0] image. @ id + "is image [0]");
  trace(myXML.containerss[0].) Children() + "== myXML.containerss [0] .children ()"); "."

  for (var j: Number = 0; j < = myXML_Container_Length; j ++)
  {
  id_cont_array.push (myXML.containerss [j]. @ id);
  trace (myXML.containerss [j]. Children () .length () + 'is j');
  myXML_textField_Length = myXML.containerss [j] .children () .length ();
  trace (myXML_textField_Length + "is myXML_textField_Length");
  for (var k: Number = 0; k < = myXML_textField_Length-1; k ++)
  {

  id_textfield_array.push (.textfield myXML.containerss [j] [k]. @ id);
  id_image_array.push (image of [k] myXML.containerss [j]. @ id);
  trace (id_textfield_array [k] + "== id_textfield_array [k] ==" + k + "--j ==" + j);
  trace ("== id_image_array" + id_image_array [k]);
  }
  trace(id_textfield_array[j]+"==id_cont_array[j]");
  }

  trace (myXML_List.length () + "= myXML_List");

  }

  function loadError(e:IOErrorEvent):void
  {

  trace ("loadError");
  }

  XML is as below...

  < drag direction = "VERTICAL" voice_over = "Slide1.mp3" start_offset = "0" margin ="" > "

  < set id = "0" direction = "HORIZONTAL" padding = "10" margin = "10" x = "10" y = "160" width = "200" height = "150" >
  < textfield id = "Text1" text = "textfieldText1" padding = "10" margin = "10" x = "10" y = "160" / >
  < image id = "img1" text = "" padding = "10" margin = "10" x = "10" y = "160" / > "
  < textfield id = "Text2" text = "textfieldText2" padding = "10" margin = "10" x = "10" y = "160" / >
  < / define >
  < set id = "1" orientation = "HORIZONTAL" padding = "10" margin = "10" width = "200" height = "200" x = "10" y = "160" >
  < textfield id = "Text3" text = "textfieldText3" padding = "10" margin = "10" x = "10" y = "160" / >
  < image id = "img2" text = "" padding = "10" margin = "10" x = "10" y = "160" / > "
  
  < / define >
  < set id = "2" orientation = "VERTICAL" padding = "10" margin = "10" width = "200" height = "150" x = "10" y = "160" >
  < textfield id = "Rem5" text = "textfieldText5" padding = "10" margin = "10" width = "200" height = "150" x = "10" y = "160" / >
  < image id = "img3" text = "" padding = "10" margin = "10" x = "10" y = "160" / > "
  < textfield id = 'Text6"text ="textfieldText6"padding ="10"margin ="10"x ="10"y ="160"/ >
  < / define >
  < set id = "4" orientation = "VERTICAL" padding = "10" margin = "10" width = "200" height = "150" x = "10" y = "160" >
  < textfield id = 'Text7"text ="textfieldText7"padding ="10"margin ="10"width ="200"height ="150"x ="10"y ="160"/ >
  < image id = "img4" text = "" padding = "10" margin = "10" x = "10" y = "160" / > "
  < textfield id = "Texte8" text = "textfieldText8" padding = "10" margin = "10" width = "200" height = "150" x = "10" y = "160" / >
  < / define >
  < / slide >

  The analysis is totally false. You operate processXML() should be like this:

  function processXML(e:Event):void
  {
            slideData = new Array();
            loader.removeEventListener(Event.COMPLETE, processXML);
            loader.removeEventListener(IOErrorEvent.IO_ERROR, loadError);
            myXML = new XML(e.target.data);
            voiceOver = myXML.@voice_over;
            startOffset = myXML.@start_offset;
            myXML_Container_Length = myXML.children().length();
            var node:XMLList;
            for (var j:Number = 0; j <= myXML_Container_Length - 1; j++)
            {
                      id_cont_array.push(myXML.containerss[j].@id);
                      node = myXML.containerss[j].children();
                      myXML_textField_Length = node.length();
                      for (var k:Number = 0; k <= myXML_textField_Length - 1; k++)
                      {
                                switch (node[k].name().toString())
                                {
                                          case "textfield":
                                                    trace(node[k].@id);
                                                    id_textfield_array.push(node[k].@id);
                                                    break;
  
                                          case "image":
                                                    id_image_array.push(node.@id);
                                                    break;
                                }
                      }
            }
  }
  

• nested for loop in the collection

  Hi Experts,

  Collection1

  ============

  SELECT o.object_id

  LOOSE COLLECTION l_obj_info

  FROM (SELECT n.node_id, n.object_id

  N nodes

  START WITH n.node_id = 100

  N.node_id CONNECT BY PRIOR = n.parent_node_id) n

  JOIN IN-HOUSE

  objects o ON o.object_id = n.object_id

  WHERE o.object_type_id = 285;

  s Collection2

  ============

  SELECT *.

  LOOSE COLLECTION l_tab

  OF ((SELECT REGEXP_SUBSTR (i_l_text, "[^,] +', 1, NIVEAU)))

  OF THE DOUBLE

  CONNECT BY REGEXP_SUBSTR (i_l_text, "[^,] +', 1, LEVEL") IS NOT NULL));

  END;

  collection3

  ============

  SELECT o.object_id

  LOOSE COLLECTION l_fin_tab

  Of objects o JOIN ATTRIBUTES att

  ON o.object_id = att.object_id

  WHERE o.object_id = collection1.object_id

  - AND att. VALUE = collection2.val;

  Please tell me how to implement for loop in the collection3 to get the values of collection1 and s collection2.

  I tried in the way below

  CREATE or REPLACE TYPE LIST_OF_ATTRIBUTES_TYPE AS TABLE OF THE varchar2 (4000);

  /

  CREATE or REPLACE TYPE LIST_OF_OBJECT_IDS_TYPE AS TABLE OF THE number (9);

  /

  (F_get_objects_by_type_id) CREATE or REPLACE FUNCTION

  i_object_type_id in NUMBERS

  i_l_text IN VARCHAR2,

  i_scope_node_id NUMBER

  )

  RETURN list_of_object_ids_type

  AS

  CURSOR objs_info

  IS

  SELECT o.object_id

  FROM (SELECT n.node_id, n.object_id

  N nodes

  START WITH n.node_id = i_scope_node_id

  N.node_id CONNECT BY PRIOR = n.parent_node_id) n

  JOIN IN-HOUSE

  objects o ON o.object_id = n.object_id

  WHERE o.object_type_id = i_object_type_id;

  l_tab list_of_attributes_type: = list_of_attributes_type ();

  -l_obj_info list_of_object_ids_type: = list_of_object_ids_type ();

  l_fin_tab list_of_object_ids_type: = list_of_object_ids_type ();

  BEGIN

  BEGIN

  SELECT *.

  LOOSE COLLECTION l_tab

  OF ((SELECT trREGEXP_SUBSTR (i_l_text, "[^,] +', 1, NIVEAU)))

  OF THE DOUBLE

  CONNECT BY REGEXP_SUBSTR (i_l_text, "[^,] +', 1, LEVEL") IS NOT NULL));

  END;

  IF l_tab. COUNT > 0

  THEN

  BECAUSE me IN objs_info

  LOOP

  FOR j IN l_tab. FIRST... l_tab. LAST

  LOOP

  SELECT o.object_id

  LOOSE COLLECTION l_fin_tab

  O JOIN ATTRIBUTES att OBJECTS ON o.object_id =

  att.object_id

  WHERE

  att. VALUE = l_tab (j) and o.object_id = objs_info (i);

  END LOOP;

  END LOOP;

  END IF;

  RETURN l_fin_tab;

  END f_get_objects_by_type_id;

  /

  What this different problem from that of pls 00382 expression is incorrect, as they were returning a record type ?

  Please do not raise the same question several times. The answer is always the same. Your data model is seriously wrong - and that's the reason why you can't get data from it.

• for loop in reverse order

  I'll try to find a way to reverse the order and the Forum... loop turns in, or reverse the index of variables on an object.

  Example:

  var o:Object = new Object();
  o["a"] = {};
  o["b"] = {};
  
  for (var s:String in o)
  {
      trace(s);
  }
  

  It would be the output:

  b

  one

  However, I need to output:

  one

  b

  I need to do this is because I add items to the object that it makes a loop, and I need to iterate through the items in the order rather than items that were just added.

  In the actual script the dedicated... loop is nested within a loop infinite while that breaks in the pipes for... loop.

  I already tried to use the setChildIndex, but it does not work because of the children being tables.

  an object is a collection of unordered of keys and values. It is absurd to try to control the order of the keys/values in an object.

  You must use a table (or a 2d array) if the order is important.

• FOR loop does not update the local Variable

  I am newer to labview, and I can't wrap the head around why not a habit of local variable to update in the code if it updates on the dashboard. Anything im missing?

  Assume that you are talking about the local variable of the 'State of the cell. The terminal updates every 500ms in the small top loop, the local variable indicates simply that the indicator and thus updates also.

  The problem is "dataflow" and you need to familiarize yourself with the concept!

  Once the while loop starts, the local variable is reading and inside the loop begins. Most likely, the local variable is read before it is updated in the small loop, so most likely returns the value of a fade on the first iteration of the while loop. Now the small loop continues to go twice per second for about five seconds. Only after the loop FOR (and everything else inside the while loop) completed, the while loop will go to the next iteration, date on which the local variable is read once more, this time with the last value of the last for loop iteration of the previous iteration of the while loop.

  In summary, the local variable updates very well, it's just that the code does not read the new value around most of the time.

  Your VI is full also potential competition conditions caused by the over-use of the local variable. You need to respect the proper execution order by eliminating local variables.

  So what is the solution? Hard to say without knowing what the VI is supposed to do. Most likely, you will need to remove the inside OF the loop and use it outside while loop for everything.

• How to end Vi in a For loop

  Hello. I enclose my Vi. I have a question about stopping a loop For I have 2 loops for the case "Test underway". I have a termial conditional that will stop my Vi but only after you have completed all the iterations of the loop For I have need of this Vi to stop immediately, when you press the stop button. I realize that it will take probably still finish an iteration, however, at the present time it waits until all iterations are performed, before coming to rest. I'm doing it with the same front button that stops the while loop. I tried a local variable, but to change a mechanical action and I prefer not to do, if this is possible. There was a lot of posts related to this topic here on the forum but I couldn't find the one suited to my needs. Thank you for your time.

  Your While loop waiting loops to stop, so you can use local variables of your stop button to stop the for loops right now.

  See you soon,.

  Jimmy

  

• Have different conditions for loop start and stop

  I do a VI when a circle is moving on an image control and its movement is decided by programming, but also by the user. I have programmed the speed of the circle as a vector which turns (using a rotation matrix) when a certain condition is met. This condition is dependent on the position of the circle and direction as well as other entries. The tricky thing is I want to that when the rotation condition is met (true), the rotation continues until the angle of the vector is equal to the original angle (when the condition became real) + / variable x.

  So my question is how do I program a piece of code that once activated, will run until a stop (depending on the State of vector early in the race) condition is reached. As it should be when the VI is on, I can not put a while loop inside an another while loop. Online help mentions also conditional for loops, but it isn't available in my version of LV (8.2)

  The correct solution is a state machine with a case inside a single while loop structure. Based on the need to use one of the several cases and move on to another matter as necessary using a state variable (for example, an enum) in a registry change. One of the cases should be slowed down and not do much except maybe controls survey.

  There are a lot of models.

  Do not hesitate to contact a simplified example of your code and help you.

• 3D table organization fomr a 1 d array in a for loop

  Hello-

  I am currently using a program OR opening multiple files (http://zone.ni.com/devzone/cda/epd/p/id/818). As a side note, I noticed that the files are automatically organized by name once records are returned from the Subvi. Will be called BxCy where x is a number and y is a number to two digits (e.g., B2C34) and within each file, I load a 1 d table which I extracted the files, I am loading.

  I want to do is organize the output so it has the structure of

  Page C1

  Line B1 [(table 1 d)]

  Line B2 [(table 1 d)]

  ...

  Line Bn [(table 1 d)]

  Page C2

  Line B1 [(table 1 d)]

  Line B2 [(table 1 d)]

  ...

  Line Bn [(table 1 d)]

  and so on.

  My first question is that I'm not 100% sure that the file names will be organised by name in the lu multi-fichier VI so is there someone who can check it out? Second, even with what I would like to know if there are effective methods to achieve this. Should I just use two tables index to classify based on their number of anc C B? This seems to slow down and I saw on other positions the function array reshape could speed up the process but I'm not sure how to proceed. I don't have access to the structures of inplace (I don't know if I just forgot to install this module, or if it was not included in my subscription LabVIEW).

  The program that I joined is in LabVIEW 2009 SP1 and I'm on a Windows 7 64-bit machine.

  Thank you in advance!

  J

  • You did not include the subVIs. Please do.
  • Never convert a path to a string, unless you do something specific OS. Use 'strip path' work on the name of the file as strings, then convert back to a path using "build path" if necessary.
  • To create a 3D tables 1 d array, you need two stacked FOR loops. Pages in the loop external and rows in the inner loop and outoindex in the output in loop tunnels. You will automatically get a 3D Board.
  • It might be much easier to use the "list of files" with a motif of "B * C *" for example. Is the number of the page always 1 and the numbers of two line numbers (padded with a zero not significant as appropriate)? In this case the sorting will be correct.

• Cursor for loop

  Hey Experts,.

  Can we consider cursor for loop as an example of cursor name

  as

  CREATE or REPLACE function TotalIncome (name_in IN varchar2) RETURN varchar2 IS total_val number (6);   cursor c1 is SELECT monthly_income FROM Employees WHERE name = name_in; BEGIN total_val: = 0;   FOR employee_rec in c1 LOOP total_val: = total_val + employee_rec.monthly_income;   END LOOP;   RETURN total_val; END; In this example, we have created

  SShubhangi wrote:

  Can we consider cursor for loop as an example of cursor name

  Laughing out loud

  Your code example explicitly sets a CURSOR variable in the PL/SQL block. Implied things happening opens, fetch and closing the cursor. But that the cursor is declared (in the DECLARE section), it's an explicit cursor - like the whole code block now has a way explicit to reference this slider.

  An approach of implicit cursor would be as follows:

  begin
    for c in(select col1, col2 from table1) loop
      .. do something..
    end loop;
  end;
  

  As you can see - there is no declaration of a cursor variable. A reference implementation is created instead and are accessible only within the construction that creates this reference - that is FOR loop in this case. The rest of the BEGIN... END block cannot refer to this cursor.

  Do not forget the advice of other posters however. In PL/SQL cursor loops is often the WRONG approach to the treatment of data - as it deals with processing (using the PL/SQL) line and not much treatment faster and scalable set of data using SQL only.

• Create a directory tree: how to call a global function from inside a for loop

  Hello

  I am trying to create a workflow that will create a directory tree in vCenter.

  Concept:

  Basically, I am trying to execute nested for loops for each level of the tree to the caller a global tree.

  Problem:

  The 1st loop for works and creates the file 'Dev '.  The second loop for does not work with error message:

  [19:16:16.219 2013-06-27] [I] building Dev folder
  [19:16:16.474 2013-06-27] [I] directory Built: Dev
  [19:16:16.476 2013-06-27] [I] the records building servers
  [19:16:16.480 2013-06-27] [I] TypeError: cannot find the createFolder function in dev object. (Workflow: TEST_TNG_New_Site_Folder_Structure / Scriptable task (item2) #36)

  I think it has to do with JavaScript not being not able to call a global function in a nested object (I'm not a programmer and don't know JavaScript, so don't shoot me on that :)

  Code: (will clean this up once I do work)

  var folderBase is ['Dev', 'DMZ', 'Prod', 'UAT'];.

  var folderT1 = ["servers", "Jobs"];

  var folderT2 = ['Window', 'Linux'];

  var folderT3 is ["Repo2', 'Repo3', 'Repo1', 'Repo4'];.

  var folderT4 is ["T1", "T2", "T3"];.

  Create the files folderBase level

  for (var i = 0, l = folderBase.length; i < l; i ++) {}

  var rootFolder = parentFolder;

  buildFolderTree (folderBase [i]);

  Create the files folderT1 level

  for (var j = 0, l = folderT1.length; j < l; j ++) {}

  var rootFolder = folderBase [i];

  buildFolderTree (folderT1 [j]);

  Create the files folderT2 level

  for (var k = 0, l = folderT2.length; k < l; k ++) {}

  var rootFolder = folderT1 [j];

  buildFolderTree (folderT2 [k]);

  Create the files folderT3 level

  for (var x = 0, l = folderT3.length; x < l; x ++) {}

  var rootFolder = folderT2 [k];

  buildFolderTree (folderT3 [x]);

  Create the files folderT4 level

  for (var y = 0, l = folderT4.length; y < l; y ++) {}

  var rootFolder = folderT3 [x];

  buildFolderTree(folderT4[y]);

  }

  }

  }

  }

  }

  function buildFolderTree (folderName) {}

  System.log ("Building folder" + folderName);

  rootFolder.createFolder (folderName);

  System.log ("directory of frame:" + folderName);

  }

  Any help will be appreciated.

  Thank you

  B

  Hello

  The createFolder() method returns the object VcFolder to the folder just created, for the new file to be used immediately.  Here is how I modified the code:

  Create the files folderBase level
  for (var i = 0; i)
  var newBaseFolder = buildFolderTree (parentFolder, folderBase [i]);
  Create the files folderT1 level
  for (var j = 0; j)
  var newT1Folder = buildFolderTree (newBaseFolder, folderT1 [j]);
  Create the files folderT2 level
  for (var k = 0; k)
  var newT2Folder = buildFolderTree (newT1Folder, folderT2 [k]);
  Create the files folderT3 level
  for (var x = 0; x)
  var newT3Folder = buildFolderTree (newT2Folder, folderT3 [x]);
  Create the files folderT4 level
  for (var y = 0; y)
  var newT4Folder = buildFolderTree (newT3Folder, folderT4 [y]);
  }
  }
  }
  }
  }

  function buildFolderTree (parentFolderObj, folder_name) {}
  System.log ("Building folder" + folderName);
  var newFolder = parentFolderObj.createFolder (folderName);
  System.log ("directory of frame:" + folderName);
  return NewFolder;
  }