For my IBM thinkcenter M/T 8171 cto Ethernet driver

Similar Questions

• RAM Kingston IBM ThinkCenter M52 problem (8113)

  I just bought a new RAM to my computer and it does not work. It's a Kingston DIMM DDR2 1024Mo (1 GB 2Rx8-5300U-555-12). The computer does not seem to recognize this RAM but it fits perfectly into the slot.

  Did some research on this problem, I found that each motherboard takes support only a certain range of types of memory in certain combinations. However, he went to the shop with the original RAM and he showed to the saleswoman and that's what I get for replacement.

  Can indicate you where I can check what kind of RAM your motherboard accepts? Or in the case where this is taken in charge, how can I install?

  Hello people! I solved the problem. Main problem is that IBM ThinkCenter M52 (8113) Bios does not configure the frequency of the RAM, so it must be PC-4200, 533 MHz instead of PC-5300 (667 MHz).

• Trying to update my driver Bluetooth for Lenovo IBM T60

  Trying to update my Bluetooth driver for Lenovo IBM T60 running Windows XP Pro service pk 3. Could someone - paste the direct link for this update. Thank you

  Hello

  You can check out the link below to download the Bluetooth for Lenovo IBM T60 drivers.

  Lenovo IBM T60

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-62928

• Pavilion 15 t-p100 CTO: USB driver for Win7 x 64 missing, also 'unknown device '.

  Decommissioning of Win8.1 to Win7 x 64 Pro. Most of the drivers; opportunity of Lenovo for Realtek Ethernet controller and works well. Two unresolved problems remain under 'other devices '.

  "Universal Serial Bus (USB) Controller" has no driver. Seems strange, like "Generic hub USB", "Intel 8 series Enhanced Host Controller #1-9C 26", "USB Composite Device" and "USB root hub" are all installed and that responded to the questionnaire. " Tried sp61293.exe to another post, but OS unsupported.

  "Unknown device" listed. Properties display these fields: Hardware ID 'ACPI\HPQ6007' and ' * HPQ6007 ', CONFIGFLAG_FAILEDINSTALL, \Device\00000054, CM_DEVCAP_SILENTINSTALL capacity 00000020, DevNode status 01802400 DN_HAS_PROBLEM DN_DISABLEABLE DN_NT_ENUMERATOR DN_NT_DRIVER, problem code 00000012, ACPI\PNP0A08\0 parents, brothers and sisters (many), install error E0000203, other fields are bad GUID and comments of unknown device.

  Computing Nice, friendly OS needs.  Thanks for your help.

  Hello:

  You can use all the W7 x 64 drivers and software (except the BIOS and firmware files) the p000-15 t on your model.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

  The unknown device needs this driver...

  This package provides the software HP 3D DriveGuard to the notebook models that are running a supported operating system. Software HP 3D DriveGuard protects the hard drive by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp69011.exe

  There are two pilots usb3 related here.  I believe that you need it...

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp68928.exe

• HP ENVY 17 t-k000 CTO: HP ENVY 17 t-k000 CTO WiFi driver (Windows 7 x 64)

  HP ENVY 17 t-k000 CTO WiFi driver (Windows 7 x 64)

  I've just killed my machine from Windows 8.1 stock that came with Windows 7 Pro x 64. I was able to install all the necessary drivers and software located on this page, except for one.

  <http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 7174...

  However, none of the Wireless LAN drivers worked. (I tried just in case)

  When installing Windows 8.1, I was able to tell that the WiFi card installed was a feature of Broadcom, but the driver on the support page for this machine does not work.

  I tried the last few days but I find no related article this topic.

  Does anyone know of another driver who can work with my camera?

  Hello:

  Here you go...

  network controller:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_133353_1 #tab1

  bcm43142a0 (bluetooth)

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-132205-1 & cc = us & dlc = en & lc = fr...

• HP laptop - 15-ac179tx: help Ethernet driver needed for HP laptop - 15-ac179tx

  Hi all

  I recently bought the HP for laptop - 15-ac179tx on the back platform and managed to install windows 7 ultimate I g almost all the drivers on the driver from Hp site, but the ethernet driver is not where to find them. Can someone help me please.

  Thanks in advance.

  Hello:

  You need this ethernet driver...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71268.exe

• HP Entertainment Center z555 digital ethernet driver for xp

  I am the owner of an entertainment center z555 digital HP and I had to do a clean reinstall, and I cannot find the ethernet driver and audio. The HP website is not available to download ethernet drivers.  I don't have the cd of restoration and much more.

  The motherboard is ASUS LRTP-LR, and I was unable to detect this product on the site of ASUS.

  Anyone has any idea where I can look these drivers?

  If you need drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• How to get the code produced for my Windows XP disc if I have the drive?

  Acquisition of Product Code Windows XP

  How to get the code produced for my Windows XP disc if I have the drive?  I signed the BONE when I bought it all first, but have no way of knowing if this is the way to receive a copy of the product key.

  Here are some utilities, which will display your product keys:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and: http://www.magicaljellybean.com/keyfinder.shtml

  Paid (free demo is available): Recover Keys: http://recover-keys.com/
  "quickly scans your system for more than 3000 + software '.
  and produces a list of software activation keys.

  13 keyfinder programs:
  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  J W Stuart: http://www.pagestart.com

• I cannot roll back the driver for Realtek PCIe Ethernet driver on Windows Vista.

  Original title: Roll Back Option is disabled under the device driver properties

  I uninstalled the Realtek PCIe Ethernet driver by mistake & then installed the other driver I found site Web of Realtek. but now if I want back with the previous version of the driver, this option is not active. so is there another way to push back with the driver already installed?

  the link skydrive screenshot for your reference is https://skydrive.live.com/#cid=D98B7D8BBADFB4CF&id=D98B7D8BBADFB4CF%21105
  Please advise with the solution.
  Rgds,

  Hello Asif,

  Thanks for keeping us posted and share this information with us.

  Method 1-

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Make sure that recover you the computer to a Normal startup after you perform all the troubleshooting steps, because the computer can be a risk of infection by the virus.

  Now, try a system restore.

  Back to us for any issues related to Windows in the future. We will be happy to help you.

  Thank you.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive. able to read DVDs

  You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive.  able to read other DVDs

  Hi, Virgil,.

  1. what kind of DVD are you trying to format (DVD + R or DVD + RW)?

  2. you receive messages or error codes when you try to format the drive?

  You can check if you are able to format the DVD in another computer.

  You can also read the following article and check:

  Format a CD or DVD

• How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

  How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

  How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

• I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. It's saying that the product may be false and it will not be installed. Any suggestions?

  I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. That is to say that this product can be wrong and it won't download. I downloaded before and didn't have any problems. Any Suggestions?

  Use one of the links below

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I have Adobe CS4 for PC, but recently bought a Mac. My driver's license can be transferred to a download that is Mac compatible?

  I have Adobe CS4 for PC, but recently bought a Mac. My driver's license can be transferred to a download that is Mac compatible?

  No, he can't. Platform Exchange only for current versions, sense CS4 and I'm afraid you're long of upgrade eligibility, too. that and of course the CS4 is not compatible with the current versions of Mac OS x. So before you waste time endlessly, simply sign up for creative cloud.

  Mylenium

• XP Pro Productkey not accepted during reinstallation/recovery for refurbished IBM T60 laptop activation

  A clean reinstall of the operating system due to a process of forced emergency recovery Windows XP on my IBM T60 laptop used, has occurred.

  The recovery process was calm and clean.  XP SP3 installed with updates.

  Activation accepted a product key, the OS is not active and temporarily live (now) 22 days.

  Activation process failed because the product key is used for multiple installations.

  My situation:

  MTM 2007 CL 7. XP PRO refurbished PC IBM 00044 069 795 551

  I am the first and only user.of that suffered from this HARD of renewed system IBM T60 nodes, hence the need for a clean recovery by using the installed IBM recovery process. The label on the device to reactivate the product key .  Proof of license .  Original product key OS is

  What woild be the best way to enable it? I can't go back to wpa.dbl and wpa.bak because of the HARD drive problem.  Need to find if I backup Windows/System32, which I doubt, I know how to recover.

  Thanks a lot for your help.

  Herminio L Oliveros

  Hi Herminio Oliveros, l.

  Welcome to the Microsoft community and we are happy to help you.

  From your description, I understand that you cannot activate Windows XP or by using the old product key nor the newly created product key.

  If you had the 90 days operating system on your computer, then I suggest you to post your query on the IBM support forums. Here is the link for your reference.

  http://www-947.IBM.com/support/entry/portal/Forums_communities

  If you had installed Windows XP on a disk, then I suggest you to contact Support Microsoft client to provide you with a new product key. Here is the link for your reference.

  http://support.Microsoft.com/GP/customer-service-phone-numbers?WA=wsignin1.0

  For any windows questions do not hesitate to get back to us.