For the Accessibility tab order

Similar Questions

• How can I change the default zoom for the new tab only?

  The new tab in Firefox 33 zoom is too high to see all 12 of my thumb nail. I changed it using ctrl - but the next time I opened a new tab, the zoom is 100%. How can I change the default zoom for the new tab only?

  I posted a style rule to shrink the tiles, which allows several of them on the page, but naturally reduces their legibility. You can experiment with the dimensions to find a look that works for you.

  https://userstyles.org/styles/106326/shrink-new-tab-thumbnails

  I use the Stylish extension to experiment because of its preview function that allows me to see the effect quickly. You can install it from the site of modules, then after restart of Firefox while searching for his "S" icon in the toolbar to manage Styles so you can edit and experiment.

  https://addons.Mozilla.org/firefox/addon/stylish/

• How can I manually change the images used for the new tab Page?

  I turned off so the images are not cached for the new tab Page history and be reloaded Firefox is restarted. In addition, some of the sites I've pinned use HTTPS and do not allow their images to be cached.

  Is it possible for me to put a custom image for each pinned site? A custom screenshot that is not in the cache or an icon to be any? Anything would be better than a box empty here.

  Thank you

  You can use the following extension to customize the image displayed for the tiles pinned, among other things.

  • https://addons.Mozilla.org/firefox/addon/new-tab-tools/

• Monitor devices blackBerry Z10 - black except for the storage tab

  Hello

  My monitor of the device (from quick settings) is completely empty except for the storage tab. This means that battery, processor, and memory are all does not properly.

  Any suggestions?

  Thank you!

  Hello and welcome to the community!

  Each time a random strange behavior or slowness comes, the first thing to try is a proper reboot:

  • Pre-BB10 ONLY devices. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • Peripheral BB10. Hold the top button until the counter reaches zero. Wait for the unit to be completely stopped (for example, nothing appears on the screen, no lights, etc.). Hold the top button until the red light. Wait through the entire boot process. If this fails, you can try the method of battery-pull above, but it is normally NOT recommended unless nothing else works.

  See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Good luck!

• How can I get the default for the new tab page when there is no improved/classic/empty choises when I click on the gear icon.

  When I open a new tab, I used to get a page which had tiles for some of the sites I visit often. Now I get the Bing search page. The help of instructions say I can change the default new tab page by clicking on the gear on a new improved, classic, or blank page icon in a drop-down list. When I click on the train, I don't get this list of options. Instead, a settings page appears, allowing me to make various changes, but improved, classic or white new tab page choices aren't there. What should I do?

  To modify the new page tab, please follow these steps:

  1. Go to about:config in Firefox
  2. Locate the browser.newtab.url string
  3. Set the value of this string on the URL of your page to the desired tab

  This should change the new tab page.

  Notes:

  • Set the about:newtab to get the page of the new classic tab
  • Set the about:home to get the default home page
  • Set the about:blank to get the blank page

• How to set the start page for the new tab page?

  I have my boot settings to open my windows and tabs from last time. If I leave Firefox with one of the new tab page, the next time I start up my home page indicates. New windows displays the homepage too. I want my homepage to remain such what. I had defined it like that before and had no problem. It's always like that? Thank you.

  If you always want to start with the subject: newtab page then you can open the properties of the desktop Firefox shortcut and add a space and: target newtab at the command line to specify from this page.

  Otherwise, you start with the home page or the pages of the previous era as shown in the startup parameter.
  
  A new window will always open by the home page unless you have an installed extension for that to change.

• Spark is the substitution of the MX tab order... Probably something simple.

  Hello

  I have a large project with some legacy code that uses so a hodgepodge of spark and mx components.

  It's very well for the most part, they work side by side with only a few small problems as to remember the difference between removeChild and Microsoft.SqlServer.Management.Sdk.Sfc.ISfcCollection.RemoveElement etc..

  BUT...

  I have a complex, dynamically generated form that I should be able to tab between fields of integrated mx and time subject than I tab, no matter what I do, need me _OUT_ of the generated complex shape and plonks me in the first spark control there - usually the home button at the top left.

  This, I hasten to add, is really not a good user experience!

  I tried all the obvious things (tab activation, tab, etc.) but the spark just seems to replace everything, like say "why this dirty _old_ mx component would focus? he don't know even what to do with it? »

  So, please, does anyone have helpful advice on the integration of the mx components in the hierarchy of the development of tab?

  Thank you

  G

  hasFocusableChildren = true...

• How to use profiles for the metadata tab in window of Contribution

  Hi Experts,
  
  Is it possible to use profiles in metadata tab Contribution. ??
  
  I want each payable region must have its own profile. For, for example, if the user will pay company information, then the metadata tab should show only metadata related company, not other meta data that are not relevant here.
  
  
  
  Help, please

  I thought you said you knew how to use/create profiles in your previous post...

  It's the quick rundown: like the regular profiles, you will first need to make sure your content has the metadata field to trigger profile assigned when it is created. This is done in designer under the definition of "Changing the content of the region" in your area of contribution. Assign the "value of trigger to profile" under "Default metadata" and then as idoc to the activation of your profile content rule condition.

• Disable animation for the new tab

  In the new FF 4.x, when I click to open a new tab, the new tab slides open (it is animated). How can I disable this option and have it just plain and simple?

  You can change a preference:

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.tabs.animate
  4. in the lower panel, you will see that the value is true by default
  5. Double-click browser.tabs.animate in the lower panel to toggle the value false
  6. Close the tab with subject: configuration window

  See:

  • http://KB.mozillazine.org/about:config

• Can Oracle 10g - I use a variable for the access of the user identifywhat tablesto?

  I have the following code in a trigger (PL/Sql block) of a form:
  
  Select fieldname in user1.sometable myvar;
  
  is it possible to use a variable instead of coding hard "user1"? And on the same subject, this variable would also be declared in the world?
  
  Thanks in advance,
  Darren

  Hello!

  User1 is the owner of the table sometable.

  If only the User1 runs your form, there is no need to put the tableowner in front of the tablename parameter.

  If other users run your form, you must create a public or private (for each user) synonym of this table.
  After that, you don't need to use owner.tablename in your sql statement.

  But:
  You cannot use a variable for the user name without using dynamic sql
  as you do if you create a recordgroup.

  Concerning

• Back to the top for the camera in order to bypass the password

  Normally, a password is required for access to the iPad. But the password can be bypassed by simple swipe upward to the password screen. Looks like a major security problem.

  If you swipe up, the only thing you can do is access the camera. You can't access anything else on the device.

• The color for the accessibility audit

  Hello

  When you test a PDF for accessibility (complete check for accessibility), which the box color tests?

  It only tests that a color is used for selection? Or he's testing contrast between colour and test?

  I have heard of some accessibility tests with the box unchecked color and would like to know what impact that would have on the criterion of accessibility.

  'Check' colors are associated with the Section 508 verification option.

  1194,22 (c) correlates of section 508 of the part of the WCAG 1.0 (WCAG 2.0 cushioning) which basically says we don't no color can convey meaning.

  One of the consequences of doing so (using color convey a meaning) is that it can / not prevent understanding of content if you're color blind.

  The only way to ensure that it is not a question must successfully master content in the authoring application and validate by a V & V of the PDF content.

  Currently, this can be done with confidence by programmatic approaches; It requires the came to "warm the body.

  So, Yes, do not be checked (c) color won't be a problem.

  Be well...

• 2851 used for the access server?

  Hello everyone. I managed to hang a lot on a no. 2851 a few months back. Now I am preparing to my laboratory facility, and (thanks to Bryant and a few other sources), I learned about access to the terminal servers. Since I am on the No. 2851 as my home router, it would be convenient to be able to use my lab on the road, or even a late night at the deployment job.

  There are modules to plug into a no. 2851 allowing asynch 8-16 ports, using octal cables?

  The 2800 series, you can use a 8 or 16 port card.

  See table 5 in this link:

  http://www.Cisco.com/en/us/prod/collateral/modules/ps5949/ps6182/product_data_sheet0900aecd80274416.html

  HTH

• Nested for the Recordset sort order?

  I've implemented a Recordset by using the Dreamweaver Server behavior Wizard and have set records (a list of names) in alphabetical order.  However, I have to do what I would describe as a nested sort order: I want to sort first by a flag, then in alphabetical order by name.

  Here is my code:
  $query_artists = "SELECT artist_id, artist_name, 'new' artists WHERE the setting_flag = the of ' ORDER BY artist_name ASC";

  I would like to order by a field called 'new' (and in alphabetical order of all the records with the flag), and then the rest in alphabetical order.

  Is this possible?

  Thank you

  $query_artists = "SELECT artist_id, artist_name, 'new' artists WHERE the setting_flag = the of ' ORDER BY artist_name, new ASC ';

• Why are my missing buttons on the tab order list?

  Little weird problem here - I checked my project for the accessibility/508 compliance and noticed that on some of my buttons tab order was somewhat paradoxical. Everything worked and was working properly, but the order was switched off. I open the slide and choose the tab order to reconfigure and found multiple instances of one or more missing buttons in the drop-down list. As I said, given that all the buttons are designed in the same way (text buttons) and they are all available when I test it in the browser, I do not understand how Captivate is not 'see' in the command tab for interactive on the slide sequence - any ideas as to what is happening here?

  Justenuf

  I had to created slides that had buttons incorporated into groups that only appeared when some variables have been triggered or a shared action them changed to 'show' and that caused the "glitch" I saw above.

  So, here's the deal: when you create groups that divide, the buttons, the ordering tool tab in the drop-down slide fails - he can see that the first series of Group of buttons, the rest are not displayed. The only way to the tab order your buttons separated into groups is to do it within the time limit (to the less the more updated version of Cp8). Tab order (at least in the project I'm dealing with right now) is shown from the bottom to the top of the timeline. In the image below, the first button that is activated by tabbing is box 448 group 456, the last is box 446 group 454. (click the box never gets turned on, it is hidden for accessibility purposes) Before someone asks why I use not only intelligent forms for buttons - they aren't tabbable and don't meet my needs.