Similar Questions

• Where that we manage for the display and entry date formats

  the specification of the user that is displayed as DD-MON-YYYY dates. Is there a config or properties file that contains the date format for display? Is there a drop down calendar which can be positioned next to an input field to date for a question on a screen?
  Thank you
  Allan

  Hi Allan,

  Just had a look at this takeover bid 10.1 on my machine.

  I noticed that for an attribute date as on a screen, when you use Input type = Year, Month and Day edits (in the file screens), it seems to display the three drop-down lists in the same order (day, month, year), regardless of what's been defined in the configuration line "input-date-formats" in messages. file .properties (locale).

  However, I was not sure of your email if the DD-MON-YYYY format was necessary for the entriesto date, or just for the display of date output. If the latter, then using the following in your messages. (place) .properties file...

  output-date-format = yyyy-MMM-dd
  

  ... will translate dates displayed like this: 1980-Jan-27

  To force the OWD to accept only dates of entry of user in the format '1980-Jan-27' then you can edit the line input-date-formats of configuration:

  input-date-formats = yyyy-MMM-dd
  

  ... However, it is rare to restrict the dates of entry into a single format. As you will see in the messages. (locale) .properties file entry-date-formats is set to a combination of common entry to the regional settings date formats, in addition to the ISO international date format (YYYY-MM-DD, e.g. 1980-01-27).

  See you soon,.
  Jasmine

• Separators from decimals/mile are not the same for the number and format of thousands. How can I get even. ?

  I installed the version 11 of Pastel partner and the error message "separators from decimals/thaousand for number and currency formats are not the same" how to get this right?

  Pastel partner support site through and their instructions/FAQ

• Change the number in Varchar2 Data Type

  Hello
  
  We have a running production applications. There is a column called home_number which is a type of data number, now called the new requirement to change of varchar2.
  
  I tried to edit the table get the below error.
  
  
  -Edit the "TECH_SOURCING_EMPLOYEE_DETAILS" table change
  -("HOME_PH_NUMBER" VARCHAR2 (1000))
  -- /
  
  -ORA-01439: column to change must be empty to change data type
  
  Please suggest me how to change the data type of column without affecting the data.
  
  Thank you
  Sudhir

  Try below, I tested in my database.

  create table tmp
  (ID NUMBER,
   HOME_NUMBER NUMBER(8));
  
  insert into tmp values(1, 9122222);
  
  alter table tmp add MY_HOME_NUMBER VARCHAR2(1000);
  
  update tmp
    set my_home_number = home_number;
  
  update tmp
     set home_number = NULL; 
  
  alter table tmp drop column home_number;   
  
  alter table tmp rename column my_home_number to home_number; 
  

• Procedure for the number of working days per month when the user enters to and from everyday

  Hi all

  Can provide you a solution to this - procedure for the number of working days per month when the user enters and days.

  Suppose that the user enters November 18, 2014 start date and date as November 23, 2014.

  The output should display

  Count: 4

  November 18, 2014 Mar

  Sea 19 November 2014

  November 20, 2014 game

  Fri November 21, 2014

  It will exclude Saturday and Sunday.

  Hello

  Here is an example of removing dates Saturday and Sunday:

  with days as(
       select (trunc(sysdate, 'YEAR') + level) as col from dual
       connect by level < 365
  )
  select * from days
  where trim(to_char(col, 'DAY', 'NLS_DATE_LANGUAGE=ENGLISH')) not in ('SATURDAY', 'SUNDAY')
        and col between to_date('18.11.2014', 'DD.MM.YYYY') and to_date('30.11.2014', 'DD.MM.YYYY')
  order by col;
  

  Cheerz,

  Stako

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• A-team - MAF Persistence Framework - is available for the MAF and it is an approach recommended by Oracle for Application Data Sync?

  Hi OTN community.

  My query is on Oracle team Persistence framework (http://www.ateam-oracle.com/going-mobile-with-adf-implementing-data-caching-and-syncing-for-working-offline/).

  It is available for the MAF and it is an approach recommended by Oracle for the implementation of data synchronization?

  Can anyone please share their experience using this extension.

  We are currently reviewing the best approach for the implementation of data synchronization.

  Best regards

  Deepak

  See: persistence of the MAF Oracle for SQLite

  Frank

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• How to use GREP to apply the character style just for the first and the second line of the paragraph?

  as the title, I just want to ask how to apply the style of character just for the 1st and 2nd line of the paragraph. Help me pls, tks!

  Can you show the screen shot with the invisible market, looks like you feedback after each line.

  So, something like this would work where I have a return forced for the linebreak (shift + return). The example on the right does not work because the line break is a return:

  

• Hi, was charged the CC for two times and do not receive an email for order number and serial number, please please notify

  Hi, I bought for creative suite. But adobe have been double charged for the article and I can't always install the updated release of creative suite...

  Please please notify

  Hi Dexter Choo,

  We have checked your account details, unfortunately, we could not find any active subscription on this e-mail.

  Please provide the email in the [private Message] mentioned below so that we can help you properly.

  E-mail address:

  Last digits of your credit card:

  Date on which the prosecution has been validated:

  Exact amount:

  As the information we need is essential so make sure you send this by [private Message] only.

  Thank you

  Atul Saini

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• FAT32, exFAT, NTFS, which is the best for the recovery of deleted data?

  I have a usb 3.0 port (Kingston 100 3 16 GB) to store my important data. I read the article on this site: http://www.ntfs.com/ntfs_vs_fat.htm

  and they say recoverablitity of exFAT is "Yes if FAT active." I don't know what FAT and how to activate it, and what type of file system should I use (FAT, exFAT, NTFS) for the highest ability of data recovery if they are deleted?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of problem, you're ready to recover the deleted data and would like to know some information about the FAT.

  A transaction-safe FAT (FAT) file system is a file system designed specifically to ensure the security of transactions for data stored on a disk. FAT requires a driver of specific hardware designed for the type of media on which the volume of FAT will exist. Assuming that there is a driver of material-specific secure transaction block, and that the driver provides interfaces to standard FAT file system, the FAT may work on removable media such as Compact Flash cards and digital cards secured, as well as media not removable, such as hard drives and NAND Flash memories.

  By design, the FAT file system is not a secured file transaction system. FATF may be corrupted if a write operation is interrupted in the middle of a transaction. Interruptions to occur due to loss of power or the suppression of the media. Fat is corrupted when the content of the FAT table does not have directory sections or data on the volume.

  I suggest you to return the article mentioned below and see if it helps you to recover lost or deleted data on your computer.

  Recover lost or deleted files

  As you disposed him to know FAT and his work, then here are some articles that might help you to learn more about FAT and its function.

  With the help of FAT (Windows CE 5.0)

  How to set up a system of FAT (Windows Embedded CE 6.0) file

  Transaction-Safe FAT File System (Windows IT 5.0)

  Implementation of FAT (Windows IT 5.0)

  Additional information:

  You can see the article mentioned below to learn more about NTFS and FAT32.

  Comparing the NTFS and FAT32 file systems

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Best way to clean the paragraph and character catalogs?

  Over the years, I have created a bunch of tags of paragraph and character for different types of documents: novels, technical manuals, etc. For a given document type, I'll use some tags and some don't. For example, a novel will not use numbered steps or sideheads.

  The problem is after years of import for the last tags of a certain type, all files in all chapter books have swelled catalogs, full of tags that are not used and are not applicable for the type of document. I would like to clean these catalogues and let only relevant tags to this kind of document. I'm ready to take the hit if a chapter or book uses a tag that it should not, as long as I know what it is.

  What is the "best practices" way to achieve this? What method do you recommend?

  1. Create a template with the own catalogue file, open each book individually, remove all of the tags file and re - import the template tags?
  2. Create a template with the own catalogue file, and then create new books of the model, copy and paste the text of the original of the files bloated?
  3. Others?

  I understand that the process will be painful, as to clean out her garage. But I'm sick of tripping over all the echoes I have accumulated.

  Thanks for the thoughts and suggestions.

  Ken

  Ken,

  Your #1 approach is probably the best way to go. However, instead of trying to clean up the tags manually, take a look at paragraph of Steve Kubis and character tools. See: http://www.siliconprairiesoftware.com/Products.html

  This will help clean up a lot of things and they are reasonably priced. It also has corresponding tools for the management of cross-references, variables, arrays, and colors that all work you same way. You can try before you buy.

• And how does one remove Christmas lights that have been offered as a decoration for the top and shifts of the screen. They tend to hide the navigation bar.

  And how one removes the Christmas lights that have been offered as a decoration for the top and bottom of the screen. They tend to hide the navigation bar. Several days ago Firefox gave the 'dress-up' in a message.

  It seems that https://addons.mozilla.org/firefox/addon/christmas-lights/ is added as an extension, but is categorized as a character (lightweight themes). Go to tools > Modules then check extensions and themes, and then uninstall it.

  Now that the status bar is now the toolbar addons that I see those that are listed are all personas and they do not affect the toolbar addons you would also find a theme, and think that it must be very confused now that I no longer able to filter topics with a Google addons research - phooey.

  Extensions can be identified with intitle: Add - ons and have changed my research of extension add-ons accordingly.

• App for the time and payroll sheet calculations

  My daughter in hospitality makes work so much split and travel on a Saturday and Sunday. I am looking for an application that we can punch in his hours for the week and be able to do the calculation of salary based on the appropriate hourly rate so that we can keep control of when it is paid as it's done correctly. Essentially, I'm lookin for an app connects timesheet information to the payroll data. Such an application exists and if so can anyone recommend one? Happy to pay for an if need be.

  Hello alissah6,

  Numbers from Apple is what I would recommend as far as doing calculations with a simple formula. You can learn more about this here.

  The application costs $14.99, however it is packed and has more than 30 models - not to mention, you can also create your own if necessary.

  I would check it out certainly if I'm looking for a few terms related to pay calculation in the App Store.

  Thank you

  James.