force events of the machine

Similar Questions

• Forcing master when the machine wants to write

  Hello. I would like a few machines on the network and run Berekely DB (XML, if it's important) on each of them. What I want, it's for all of them to be able to write to the database at different times. I was told that I can "force" a machine like a master when he wants to write to the database. But I can't find anything online about it. Is this possible?
  
  Thank you.
  
  -tom

  Hmm, usually Berkeley DB replication allows only one master. But that actually means a single master at a time.

  You say you want to be able to write in various databases "at different times". Does that mean that you are ready to go to the trouble and complexity of switching control each time to achieve? It's a little bit unorthodox, but it is possible.

  To switch masters, firstly, reconfigure the existing master to become a customer, by calling DB_ENV-> rep_start(), by passing the DB_REP_CLIENT flag. Then, on the site that will become the new master, call DB_ENV-> rep_start() with the DB_REP_MASTER flag. Note that you would like to ensure that the new primary site is "caught up" the old master before making the switch: all transactions that had not yet been replicated from the old master would be lost after the switch.

  You can also accomplish this by using elections, by manipulating the choice at various sites priority setting. It's a bit safer in the sense that it prevents any transaction to be lost (assuming that the old master participates successfully in the election). What is described on the 'Election' of the reference Guide page (near the bottom of the page). Note that the discussion assumes that a master broke down; in your situation there is no need to restart computers or reopen database environments.

  Note that both of these suggestions work only if you use the replication database API. You can't do this if you use replication manager.

  Alan Bram
  Oracle

• Structure of the event in the event structure

  Is it possible that I can have a structure of the event, which is in another structure of the event? When I run the code, I can't use other buttons. (See chart for details)

  

  Do not put the event structures in the structures of the event! There is never any reason to do so.

  Redefine architecture your code in a correct state machine.

  (By default, events lock the façade until the event ends and if you raise the event internal or external, first of all, the other event can never fire because the current event can never accomplish or is inaccessible by data stream.)

• event and state machine

  Hello

  I have a problem when I want to set up an event in my state machine.

  The state machine is reading communication series through different States 10 +.

  The problem came when I tried to add an event inside the State number 10. In the number of State 9 code seems to work only partially (an option button is not possible to change the value on).

  It seems almost that it is frozen but when I select the code I can see it works well (option button isn't).

  It is strange that when I remove the event in condition 10 all is well again? The event code is not yet performed yet because it is in the frame after!

  Any thoughts?

  I'm under LabView 2013 on a Windows 7 PC.

  I'm trying to figure out which of the two cases is the one who seems to hang if the name would be better than a number.

  When using am event structure you don't we want to use a local variable.  In fact, you should only use local variables on rare occasions that they break the flow of data.  The event structure is fine for the entry.  The problem is the way you treat things after that the button is pressed.  Again, I think you have to look at a design model of producer/consumer with a machine of the State in queue.

  The best way to have a writing occur only after a button must have the code for writing in a case that is active when the button is true and is simply empty, when it has the value false.

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• Programmatically trigger a structure of the event with the value (signaling) is not responding

  Hey, in my attached program I check if the two steps of translation are in a specific position. If Yes, I want my code to execute a sequence of movements. If this isn't the case, I'm asking the user if he wants contributed from this position anyway. It has three options: Yes, go to load (the specific position) and cancel. If he hits Yes, I am using a property of signal value which should update the controls Boolean true, allowing the sequence. Cancellation and work "to load" perfectly fine, but 'Yes' does not work. I think I need a structure of the event to ahndle the value of the Boolean control 'x' change event, however, the addition of this structure of the event for some reason any even do not allow me to click on the Start button of the procedure.
  Thanks for any help in advance.
  Doug

  Really, you should look into using a State Machine.  You should have really not what happens inside a structure of the event.

  In addition, I would like to use a shift register to store this value instead of a front panel control.

• Event Viewer: the initializer for type for 'advancedsetttings' threw an exception

  I get an error "the initializer for type for 'advancedsetttings' threw an exception" when trying to view the subscriptions in the event viewer.  The machine is a windows 2008 server.  It worked before but just stoped working.  I tried loging in as a local administrator on the machine account and has not worked.  Also, it does work with an account that is a domain administrator.  That everyone knows, or knows how to solve this problem?

  Thank you.  With the help of the question please repost the question in Forum Windows Server

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• Error message: "the address book failed to load. Outlook Express is incorrectly configured, please re-install. "at the start of XP and the machine.

  After uninstalling my XPSp3 o.e., I started getting the following error message: "the address book failed to load. Outlook Express is incorrectly configured, please re-install. "at the start of XP and the machine.

  Uninstalling included 7 entries registry to remove all the * files dbx and files *.wab addressbook, except himself. After uninstalling and receipt of the error message above, I tried to use my CD of XP OS to re - install O.E. as a component of Microsoft without success.

  I upgraded to Outlook 2007 and imported to the address book of O.E. successfully before uninstalling.

  Please advise me how to get rid of the error message always appearing at startup.

  Thank you

  You can't really uninstall and reinstall OE without having to reinstall XP as OE is a part of it. I hope your foray into the registry does not require a reinstall of XP.
   
  You now have the DBX files? WAB files?
   
  If Outlook has been on your machine before this event, see the reference by PA Bear in this thread
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995
   
  If Outlook has not been installed, see these.
  
  Courtesy of Michael Santovec:
  http://pages.prodigy.NET/michael_santovec/techhelp.htm
   
  All of you who have the same cause.  Something is screwed up with your address book.
   
  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook
   
  For more details, take a look at:
   
  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321
   
  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm
   
  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm 

• How can I stop high disk activity HARD and blocking of the machine

  At startup, the machine takes 2 to 3 minutes before the login screen is available, with HDD coming out of the machine all the time. The Office takes 1.5 minutes to load up. Then quite randomly and especially if I have access to Internet, the HARD drive starts screaming from afar and I get any program I use, indicate "not responding". Similarly, logging on Internet and then check in a site and outside, Yahoo shows "not responding" then comes good, however at that time that the HARD drive is once more trying to get out of the machine with the blocking of the entire system. This condition may last between 1 and 2 hours.

  I can't get out of the Internet or Vista and my only recourse is to hold down the button "power on" for 5 seconds, stop the machine. The alternative is to turn the machine on and leave it alone for a few hours, but it is still not guaranteed the high activity of the HARD drive will be start at random. At the time of blocking, the CPU is variable between 1 and 10% with 4 GB of ram running at 96% to 100%.

  I am running Windows Vista Home Premium (SP2), on an AMD Athlon (TM) 64 x 2 processor Dual core 5000 + 2.60 GHz, Medion machine with 4.0 GB Ram and 32-bit operating system. The machine is a PC MT7 MED MT469G. The boot drive (C: /) is about 350 GB, with a second backup drive (D: /) about 100 GB and a Data partition (E: /) drive on 400 Gb. I.e. two 350 and 500 GB drives.

  The machine becomes practically unusable and I can't stop this frenzied action of HARD drive. I have to be to destroy the HARD drive whenever I turn on. I tried the advice from the experts by disabling regular departures, stopping at various folders, to nothing does not.

  I came through all products Windows 95Windows with XP and 2000 and when I bought this computer Medion, with Vista, I have never experience so much time lost to fight with a machine with this huge HARD drive activity and constant locking machine.

  I understand, sites that Windows 7 is pretty much the same, God forbid, I will put on my wife's machine and is the reason why I have not upgraded.

  Help! Please, how can I get out of this mess?

  Concerning

  John Mills

  I'm not sure I understand your disk configuration. You have two physical drives with drive non-system, divided into two partitions?

  All other programs are running when this happens outside of the browser?

  I would start by Process Explorer to identify the process generating the IO.

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  On the file menu, click 'Show details for all processes', and then on the view menu, select the columns to activity e/s of the shoe.

  While you are in the view menu, click on "System information" and check how your 4 GB 32-bit Vista can see. It is normally about 3 GB but can be much less with some video cards.

  There is more information on the use of Process Explorer here:

  Windows Sysinternals Primer: Process Explorer, Process Monitor and more. Tech· Ed 2010 North America | Channel 9

  You can also use the built in by typing perfmon performance monitor in the box "Search" in the Start Menu.

  http://Channel9.msdn.com/events/TechEd/Australia/Tech-Ed-Australia-2011/SVR306

  This should help you identify files that are used.

  For a more detailed study, you must use Windows Performance Toolkit:

  http://msdn.Microsoft.com/en-us/performance/cc825801

  http://Channel9.msdn.com/events/build/BUILD2011/HW-59T

  Download here: http://www.microsoft.com/downloads/dlx/en-us/listdetailsview.aspx?FamilyID=6b6c21d2-2006-4afa-9702-529fa782d63b and select the components you need.

  There is a possibility of a hardware problem or the disc is not not in AHCI mode.

  I would also look at the antivirus you are using.

• "operations are underway. Please wait. The machine switches off automatically '-system never stops.

  Sometimes, when to stop Vista, instead of a normal shutdown, I get quite common background and a message reading: "operations are underway. Please wait. The machine switches off automatically. "The system then continues to run indefinitely, and I finally have to do an emergency stop. After the reboot, I then most of the time have to do a restore to an earlier point; Once in a great while, he'll tell me the test stops abnormally and charge really. Tried to figure what could be causing it and can't find a logical reason. Diagnosis never found anything, but there is not really anything in the windows which diagnosed something as a shutdown of the system.  Help.  It's boring.

  Hi Baron Stewart,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the mouse and keyboard and then try to stop

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  
  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: check the logs in Event Viewer for more information on this problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• I'm running into this error message to a sysprep to capture a WIM image modified: "a fatal error has occurred while trying to sysprep the machine."

  Original title: WDS & Sysprep

  Hello

  I'm running into this error message to a sysprep to capture a WIM updated image the:
  3.14 system preparation tool
  "A fatal error has occurred while trying to sysprep the machine."
  She is probably explained by the time of Amendment 3, but is there a way to bypass that force me to change the registry whenever I use the new image?
  Any recommendations on how to solve this problem would be appreciated.
  Thank you.

  GN

  Please post your request here:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproinstall&filter=AllTypes&sort=lastpostdesc

• Is there a way I can sync my Facebook events to the calendar of Windows 8 on my computer (no birthdays, events only) application?

  I just got a new computer with the Windows 8 operating system on it.  I want to synchronize my Facebook events with the calendar app. Is this possible and if yes can someone walk me through how to do it?

  Hi Brittany,

  I finally found a roundabout to do this.
  It seems, in the calendar settings screen, you can add that gmail, hotmail/live and outlook accounts. As you have Windows 8 machine, you will certainly have a hotmail/live account, which I think should use the same password that allows you to connect to your computer and your Windows Live Calendar should be display in your calendar on Windows 8. So all you need to do is import the facebook calendar in Windows Live Calendar.
  You must first copy the url to your facebook events (or anniversary) calendar of https://www.facebook.com/events/calendar.
  Click on the small wheel settings next to 'Today' in the corner on the right, then click Export, then copy the URL for the calendar of events or birthdays (depending on what you want).
  Then you have to do is go to your hotmail/windows live calendar (Calendar Windows Live). Click on 'subscribe' up to the top and you subscribe to a public calendar by adding the url that you copied from the facebook calendar.
  This means that you windows live calendar now has your events facebook and next time you start the calendar in Windows 8, they should appear.
  NOTE: I also synchronize my calendar to facebook with my gmail calendar and my gmail account has been added to the calendar windows 8, but for a reason so do not arise. I have to use the Windows Live Calendar so that it can work.

• Run the event at the start of the Weblogic Server

  Hi all

  I want to run some events at the start of the weblogic server.

  What the version u use?

  One way is

  ServletContextListener

  A better way to implement a class of application startup is to use the servlet context listener. He listens to the start and stop application events by implementing the methods contextInitialized() and contextDestroyed(). You can configure the listener in your web.xml () file, or even use the @WebServletContextListener annotation.

  / public class StartupListener implements javax.servlet.ServletContextListener {}

  ....

  {} public void contextInitialized (dry ServletContextEvent)

  ....

  }

  {} public void contextDestroyed (dry ServletContextEvent)

  ....

  }

  }

  Downside again; There is a context per "web application" per Java Virtual Machine. You would then have to manage cluster problems yourself. But positive on this subject is that you don't have to worry about that whether the external call, as this could occur with startup servlets. But it is portable and can be used on any Java EE server.

  If you use version 12. You can use

  Another way to use ApplicationListener. You can 4 event to capture it...

  See this http://docs.oracle.com/cd/E24329_01/web.1211/e24368/lifecycle.htm#i1058406

• Return the machine to a previous snapshot

  Hi guys,.

  I will try to describe my case in detail.

  I have to run automated tests on a machine located in Vcenter, but when you are finished running tests I must return this machine previous instant. I think that I have to use schedule a task for the stop and after that another task of timetable for the market, but the procedure is little difficult for me with this option on the hard disk in persistent and not persistent option.

  Could you help me?

  Thank you

  Tony

  Please use the last-born disk option which will return the machine of the Moose after reboot. After that, you can schedule a task to stop the VM once the event ended. This will ensure that after stop/restart, disk/VM starts in the State of the moose.

  I hope this helps!

• Unplug the machine but private interconnection cable has not restarted

  Dear all,

  I have RAC Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - database of 64-bit on Linux.

  I had a strange experience with my private of interconnection between the 2 nodes. When I test disconnect interconnection link private in one of the nodes, the machine has not restarted. When I check in the cluster log, it is said to one of the nodes is restarted.

  2013-10-07 12:34:18.570

  [cssd (7565)] CRS - 1612:Network communication with node centaurus22 missing (2) for 50% of the timeout interval.  Removal of this node of cluster in 14,360 seconds

  2013-10-07 12:34:25.572

  [cssd (7565)] CRS - 1611:Network communication with node centaurus22 missing (2) 75% of the timeout interval.  Removal of this node of cluster in 7,360 seconds

  2013-10-07 12:34:30.573

  [cssd (7565)] CRS - 1610:Network communication with node centaurus22 missing (2) 90 percent of the timeout interval.  Removal of this node of cluster in 2,360 seconds

  2013-10-07 12:34:32.935

  [cssd (7565)] CRS - 1607:Node centaurus22 is to be expelled in incarnation cluster 272740834; details at (: CSSNM00007 :) in opt/app/11.2.0/grid/log/centaurus21/cssd/ocssd.log.)

  2013-10-07 12:34:34.937

  [cssd (7565)] CRS - 1625:Node centaurus22, number 2, has been closed manually

  2013-10-07 12:34:34.952

  [cssd (7565)] CRS - 1601:CSSD Reconfiguration is complete. Active nodes are centaurus21.

  2013-10-07 12:34:34.965

  [crsd (8720)] CRS - 5504:Node event reported for the node 'centaurus22 '.

  2013-10-07 12:34:36.427

  [crsd (8720)] CRS - 2773:Server "centaurus22" has been deleted from the pool "generic."

  2013-10-07 12:34:36.428

  [crsd (8720)] CRS - 2773:Server "centaurus22" has been deleted from the pool ' ora. SASDB'.

  2013-10-07 18:46:28.633

  Have you ever faced this problem?

  Your help will be kindly appreciated.

  Thank you

  Kind regards

  Moussa Hanafie

  Fencing without rebooting is introduced in 11.2.0.2 grid Infrastructure, instead of restarting a node as pre - 11.2.0.2 during expulsion happens, he'll try to stop GI gracefuly on the evicted node to avoid a restart of the node.

  http://www.Trivadis.com/uploads/tx_cabagdownloadarea/Trivadis_oracle_clusterware_node_fencing_v.PDF