Programmatically trigger a structure of the event with the value (signaling) is not responding

Similar Questions

• Panel close? Event causes the front panel for not responding

  I am trying to create a simple program. Some time ago loop that generates random numbers, just so that I can see it is running. An "Exit" button is connected to an output of the while loop Terminal. The event structure is also in this loop, which intercepts "Close panel?" and don't know, then said of faithful son in the while loop output terminal. To be more precise, the output terminal takes an OR statement that takes the button leave and this Structure of Boolean event as inputs. When I run the program, the release button does not respond, however, with the highlight the part of structure of the program event execution seems to work. Sorry if I'm bad at explaining, any help is appreciated.

  I guess my real question is, how do correctly implement you that a button exit stops the loop and clicking on the red x or File: Close is ignored and rather does the same thing as your Exit button.

  The problem is that you don't have a case of timeout in the structure of your event, so he's sitting there, waiting for any registered event (in your case, the only recorded event is the closing of Panel event).  He reads your button to quit once, you should see if you run with execution highlighting.  The while loop can not continue until all that it ends and the structure of the event may not finish until an event occurs.

  A better solution than adding a timeout event is to add an event to change the value of the button exit.  Put the Quit terminal inside the case of the event and the wire which, in the same tunnel connected to stop the while loop.  If you do this there not need timer loop as the structure of the event will be sitting there waiting until the Quit button or Panel is closed.  However, if you want to add more code inside the while loop that will run continuously, then you will need a time-out event (that can take the place of waiting since the timeout will regulate the timing of the loop).

• "The value entered does not Format of the field.

  If something similar has been posted, I apologize! I tried to look for it and has not been able to find the answer.

  I have a form to determine the potential savings, if a customer makes our products to a competing product. Our sales staff filling in many areas that allow us to determine the annual cost that the customer currently committed, as well as the potential annual costs associated with our product. At the bottom of the page, using a simple calculation JS, it determines annual dollar savings by changing brands.

  I would also like to include the annual savings as a percentage of current costs, but for some reason, I cannot get the script to work. The error message that appears indicates: "the value entered does not match the format of the field [annual percentage savings]."

  Now, the two fields referenced in my script are formatted in dollars, so I don't know if this makes a difference or not. My script is below.

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;
  var y = this.getField("Cost_Per_Year_Current").value;
  F.value = Event.Value / y.value;

  If (y.value < f.value) event.value = ";

  Given the percentage is not strictly necessary, but it adds to the form, so that any help would be appreciated.

  Thank you!

  Post edited by: MelissaZoller (format)

  I would use:

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;

  var y = this.getField("Cost_Per_Year_Current").value;

  If (y<= 0)="" event.value=''>

  else {}

  Event.Value = f / y;
  If (y< f)="" event.value=''>
  }

  In this way there is no division by zero or a negative number.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• machine freezes, slow start, apps to open slowly, the login window is not responding

  I had a problem with my macbook pro for a while now where the machine becomes completely insensitive and I pressed the power button to restart. I already posted about this problem and although the answer was very helpful, I did not understand 100% how to solve the problem and since that time, the thread is not answered. Please follow the link to the thread below and I hope someone can help me more. now, he becomes desperate enough that it happens more and more frequently. Sorry, repost and old thread but I don't know what to do and I don't want to replace my laptop if I do not.

  Thanks in advance

  machine freezes, the login window is not responding

  Link Davis is one who can read this report. How much memory you have installed? Could you run an EtreCheck and post it.  http://www.etresoft.com/etrecheck

• The desktop icons do not respond after the use of IE

  Hello

  Anyone got a solution for this? When the computer is turned on I can use the icons on the desktop, no problem. However, after I used Internet Explorer from the desktop icons don't respond well the pograms can be opened from the start menu. As the recent problem I tried uninstalling some updates recently installed, without solving the problem. Using Windows Vista and IE9

  After that I used Internet Explorer from the desktop icons do not respond

  Does that mean exactly?   For example, what do you see?   For the best answer to this question, you could use ProcMon and know what modules are involved when you do what these are.   ;  )

  However, without using ProcMon you can check with the Manager task or resource or ProcExp monitor if there is always a hidden background iexplore.exe processes running or anything related to IE which started as a result of your using IE.   If so then try to kill these processes.   Etc.

  Related to this, you could also consider what you used IE before your symptoms occurred.   This means that would understand that make your "desktop icons" and change it to something more neutral.   For example, if you had clicked on was a shortcut Internet (aka the .url file) that requires a network connection, change for people who only runs locally, such as about: blank.   So if you could close the window that has opened and always use the shortcut you would have refined your description of symptom to involve the network connections.

  Related to that, would be your security package, for example, some are trying to act as a hidden proxy to "analyze" the HTTP traffic.   Then the problem would not be IE but the hidden proxy.  Etc.

  You can't wait for a "fix" until you have a fully understood symptom.   More details and diagnosis is necessary IMO.

  ---

• Unable to connect to the internet, the dns server is not responding

  Hello

  It is the second system I've seen in the last two weeks with this question, I reloaded the OS on the first.  The system is Windows Vista Ultimate x 64.

  That is the problem.  Open Internet Explorer 9 on a Windows 7 PC, you get the message:

  Internet Explorer cannot display this webpage

  Click on diagnose connection problems, you get the following:

  The DNS server is not responding

  Look at a detailed information your told to contact your network administrator (this is me - no other XP or Windows 7 PC on the network has a connection problem).

  Below that is the message:

  Your computer is trying to use a DNS server that is incorrect or does not exist.

  Note that this is a laptop that has started on another network with the same problem.  I took it to my office to solve problems.  My DNS server is a WIndows SBS 2003 server.

  Below that is a log file of etl you cannot open (Notepad considers undesirable, much of the use that is).

  The steps I did to try to resolve the problem.

  Virus system scan

  There is no hosts file, I've recreated which.

  The static value IP and DNS.

  I can ping the DNS server by its IP address, but not by name.

  I put the DNS address to 208.67.222.222

  Restored network drivers

  Reininstalled all network drivers

  Disable Microsoft Virtual WiFi adapter

  Any suggestions would be helpful.

  the

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to reset the DNS cache by using the following steps and check it, if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER: ipconfig/flushdns

  c. you will see the following confirmation:

  Windows IP configuration

  With success, emptied the Cache of DNS resolution.

  Method 2:

  Try the following steps to release and renew the IP address and check if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER:
  - enough ipconfig at the command prompt and of the press ENTER
  - ipconfig / renew in the command prompt and press ENTER

  c. check if the problem is resolved.

  Hope the information is useful.

• The proxy server is not responding

  I have Windows 7 and IE 10.  I get this message every time I try to connect to the Internet: the proxy server is not responding.  It is not the modem because I can connect with other wireless devices.  When I try to fix it, I get the message: windows could not automatically detect the network settings of the proxy.

  Hi Sam,

  Were there any changes made on the computer before the show?

  You can get this error if there is no proxy server is configured on the computer or due to a third-party program. Follow these methods to solve the problem:

  Method 1:

  I suggest you to follow these steps and check if that helps:

  a. open Internet Explorer.

  b. click on Tools and then click options Internet.

  c. click on the connections tab, and then click LAN settings.

  d. deselect use a proxy server for your LAN.

  e. place a check on automatically detect connection settings.

  f. click OK twice.

  You can also see the article for more information:

  Change the proxy server settings in Internet Explorer

  http://Windows.Microsoft.com/en-in/Windows7/change-proxy-server-settings-in-Internet-Explorer

  Method 2:

  Refer to the article to verify if a violin is the cause of the problem:

  [Violinist] Difficulty "the proxy server is not responding" problem caused by a violin

  http://blogs.msdn.com/b/tfang/archive/2012/07/18/Fiddler-fix-quot-the-proxy-server-isn-t-responding-quot-problem-caused-by-Fiddler.aspx

  Let us know if it helps.

• The DNS server does not respond?

  Often my internet connection fails completely. It connects to any kind of Web site when it arrives. I use the option to "solve problems", and discovered that the DNS server is not responding. So he says. It happens all the time and I can't fix it myself. Can I get some advice? Maybe even a complete solution?

  Hi Jim,.

  Did you of recent changes to the computer?

  I suggest that you try the procedure described in the article below.

  Method 1:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Please refer to suggestions of Vinod gwenaëlle replied on 10 March 2012

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/the-DNS-server-ISN

  Additional information:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-CA/Windows/cant-connect-Internet#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you

• See the value of zero instead of "the value entered does not match the format of the field [].

  I use the simplified notation filed to perform subtraction on a budget form.

  They all have an excellent work and have no problem display a value of zero when it's a simple subtraction (value1-value2).

  However, on my last field I want to take the total income and subtract what I spent (approximately 40 fields) and get a balance zero.

  When I try to do it I get this warning "the value entered does not match the format of the field [].

  The calculation works fine and displays the correct value for all the foregoing ".» 01 "and displays negative numbers. 01 "and underneath as well (if I go on the budget), she just may not show a zero, which is my goal for this equal to zero each month.

  I tried to watch if the forms and have not found an answer that works even for my situation.

  
  Happy to post the form here, just do not know how to do it.

  Thanks in advance,

  The custom calculation script may be something like the following:

  Get the value of field of income, as a number

  var v1 = + getField("Income").value;

  Set up an array of domain names

  var aFieldsToSubtract =]

  "ThithesB,"

  "TailleB,"

  "EFundB,"

  "MortgageB,"

  "HomeItemsB,"

  "HomeRepairsB,"

  "ElecticB,"

  "GasB.

  "WaterB."

  "SewerB,"

  "TrashB,"

  "PhoneB."

  "InternetB."

  "AutoInsB,"

  "UmbrellaB,"

  "IdentityB,"

  "CosmeticsB,"

  "ToiletriesB,"

  "PocketEBB,"

  "PocketCBB,"

  "GiftsB,"

  "HouseSuppliesB,"

  "PersonalOtherB,"

  "PersonalOther2B,"

  "GroceriesB,"

  "RestaurantsB,"

  "ClothingB,"

  "CarGasB,"

  "CarRepairsB,"

  "CarOtherB,"

  "MedicalBillsB,"

  "MedicalOtherB,"

  "EntertainmentB,"

  "VacationB,"

  "DebtCarB,"

  "DebtStudentLoan1B,"

  "DebtStudentLoan2B,"

  "DebtStudentLoan3B,"

  "DebtCreditB,"

  "DebtOther1B,"

  'DebtOther2B '.

  ];

  Subtract the values in field

  for (var i = 0; i)< afieldstosubtract.length,="" i="" +="1)">

  v1-= + getField(aFieldsToSubtract[i]).value;

  }

  Set this field value by rounding the result to the nearest

  Event.Value = util.printf ("%.2f", v1);

  Do not think of this as a band-aid, think the correct way to perform the calculation, because it is. Note that "Thithes" may be a spelling error.

• Error message - the value entered does not match the Format of the field

  I get an error message in Adobe Pro x: "the value entered does not match the format of the field [JF13].

  I have JF13 scheduled as follows:

  Calculate tab:

  If (Number (this.getField("ck4").value) > 0) this.getField("JF13").value = Number (this.getField("FL019").value); else this.getField("JF13").value = "";

  It is programmed in this way, so if the user checks the checkbox in front of the field, only then will JF13 fills a value, which pulls of FL019. I also value parameters 'number' because the data to display in the form of a dollar amount $xxx.xx.

  FL019 is a hidden field on the form which takes an amount of a central computer and its settings can also be programmed to 'Number':

  I get four popup windows with the above mentioned error message, and the only way to make the stop message is to remove the «number» field format. However, when this is done, if a number any ending in a zero is entered, it cuts the zero. This is not acceptable either.

  Is there some kind of script that I could add or otherwise to prevent the error message and the cutting out of the zero on JF13?

  I'm not very proficient with javascript, any help would be appreciated!

  Just include the two quotes, not the comment brackets.

• "The update server is not responding"

  I am a member of creative cloud and I'm trying to update Photoshop to 13.1 but whenever I go to help > updates, Adobe Application Manager keeps giving me "the update server is not responding...". »

  I solved the problem. After countless times of updating of Windows 8, uninstalling and reinstalling, I found that my laptop Samsung came with software that would allow me to put a "Mobile Access Point" or in other words a hotspot.

  I followed the instructions on how to disable the "Microsoft Virtual WiFi Miniport Adapter", but my computer does not display a Miniport Microsoft Virtual Mifi card.

  I knew that this adapter set a hotspot so what I did activate the 'Mobile Access Point"via the samsung software that came with my computer, and then as I expected, he showed the"Microsoft Virtual Wifi Miniport Adapter"and was able to turn it OFF.

  After you turn off, I could see updates without the server update Responing no error.

  Also, after having diabling the "Microsoft Virtual Wifi Miniport Adapter", I went to the Device Manager and the title of the network card, I found that "Microsoft Hosted network virtual card" has been disabled. So for those who don't see not the "Microsoft Virtual WiFi Miniport card" you must activate a hotspot first if it will appear or try to disable through Device Manager by disabling "Microsoft Hosted network virtual card"

  If this proves to be a problem with Adobe Application Manager and Microsoft Virtual Wifi adapter. I hope that Adobe will have a fix for this soon because the users of Windows 8 is not the "Microsoft Virtual Wifi Miniport Adapter" visible by default.

  I hope this helps someone!

• Creative cloud - the update server is not responding

  Hello

  Am trying update illustrator but Adobe Application Manager responds (AAM) continuously with the message:

  "The update server is not responding. The server may be offline temporarily, or Internet or firewall settings may be incorrect. »

  I tried to disable the firewall and download of version 6.2 of AAM without success.

  What can I try next?

  Typical... Find the solution immediately after the posting of the question:

  http://forums.Adobe.com/message/2692886#2692886

• Application error handler: "the update server is not responding."

  With each attempt to check updates for Creative Suite 5, the Application Manager responds immediately with an error: "the update server is not responding. The server may be offline temporarily, or internet or Firewall setting may be incorrect. Please try again later. "My last check for updates was 27/03/2012.

  I haven't added any restriction since 3/27. I do not block outbound communications in my firewall. All communications through all firewalls are functioning normally.

  Is there a way to check if the update server is really low?

  Perhaps the address of the server has changed. It would not be the first time that a person no - think had this notion: '' this is what we will do, change the IP address of the update server and then unroll the new address in the next update."

  Thanks, Tooky. You nailed it.

  For anyone who reads this, simple workaround for this problem on Windows is as follows:

  • Open the Device Manager. To do this, type "device manager" in the search bar of the Start Menu.
  • Open "network adapters."
  • Disable any device driver listed with the name "Microsoft Virtual WiFi Miniport Adapter.... ». To do this, right-click the name, and then select "disable."
  • Try updating Adobe Application Manager. This should work for now.

  I don't know if the original plan of Microsoft to push the use of this driver in the throat of the Windows 7 certification companies never materialized. So although my internet and network connections remained after I disabled the driver, I recommend the pilot in reactivating once your update is complete.

  TookyDC has been damaged, but easy enough to find a way to fix. If you want to read the outdated Adobe solution still works for this problem, the fixed link is http://helpx.adobe.com/creative-suite/kb/error-update-server-repsonding-cs4.html.

  WARNING: After completing the last updated Adobe, Microsoft Security Essentials is now failing to validate Windows 7 on my computer. By reactivating the above driver did not help. This could be an isolated incident. But you should be aware of the problem I now have much more serious. What a joy!

• The DNS server is not responding.

  Just bought this WRT160N a few days ago, I implemented and no problems now, randomly, I can't the internet to work, every once in awhile, he will work for a few minutes, then it will return new.  When I troubleshoot Windows, I have "the DNS server is not responding" * detected * this computer is located on a wired connection to my router, and is currently the only computer connected to my router.  The connection works fine when I run the cable directly from my modem to the computer (which im doing now) any help would be greatly appreciated!

  To upgrade the firmware of your router, you don't need to be connected to Internet... Just connect the Modem to the computer and download the firmware on your router... Once you have downloaded the firmware on your router... Connect the Modem to the router on the Internet Port and connect the computer to the router Linksys on Port n ° 1... Follow the instructions I mentioned in my previous post, how to upgrade the firmware on your router... Once the firmware is upgraded successfully... Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link