Forcemore than two end points to use Codian MCU

Similar Questions

• How to remove a path between two anchor points

  Hello

  everything is in the title,

  could you tell me please how to remove a path between two anchor points without using the tool Eraser path?

  When I select these two folders and press to remove all disappeared.

  PS: I want to keep the anchor after the removal

  Thank you

  with the Selection tool direct (white pointer), click the path segment (no points) or select slide above without going on something else and tap on delete.

• same tables but shared with two end user

  Hello
  
  On one of the database with the tables customers, customer_branch, customer_produces, Bill, invoice_items, back.
  BUT here seen two end-users, they use even tables, pl/sql... It will use anothers is UserB, each of the end users with their own data and non.
  
  When I want to separate two UserA, UserB the session, I need a (user) field on each of the tables. So that they can use the same pl/sql tables.
  Whenever I try to insert, update, delete sql statement or run on pl/sql, you must add cause a where clause
  for example to delete customers where tid = 1 and user = 'user ';
  Y at - it any sql statement in method do and pl/sql ignores the cause of the user? I can not keep the user in oracle session so no need to concern the type of user?
  for example to delete customers where tid = 1;
  More is high clear question?
  Thank you
  Francis

  Hello

  I think the virtual private database, can work for you.
  But analyze the condition if you can... go further... (Alternative for you...)

  http://www.Oracle-base.com/articles/8i/VirtualPrivateDatabases.php

  -Pavan Kumar N

• Pen tool outline - join, you have to select two open end points

  Hello

  I am trying to trace an image and include certain details in the trace.  I'm unfamiliar with the proper use of the pen tool, but the illustration below shows where I.  I traced on both sides, but when I try to join the points I get the message "to register, you must select two open end points.  To try to combine them, I tried all the tools of pathfinder, but nothing is done, they do not convert these points so that they are able to be joined...

  

  The obvious way around is just to move the (highlighted in red) point ontop of each other, but this seems as a workaround / lack of professionalism.

  Here is a picture of the overal far design

  

  Any help on this is much appreciated, thank you

  doydy,

  You can select both paths and in the stroke Panel/palette, click Cap > round and join > round, which will give you nice corners and not of funny things that comes out.

• I had Adobe Cloud (all applications) to 32.98 USD more than two years now, I have wanted to renew but new contract price is $79.98 - I only use Dreamweaver maybe three times a year, maybe pro adobe acrobat 4 times per year and photoshop maybe 2 times. Is

  I had Adobe Cloud (all applications) to 32.98 USD more than two years now, I have wanted to renew but new contract price is $79.98 - I only use Dreamweaver maybe three times a year, maybe pro adobe acrobat 4 times per year and photoshop maybe 2 times. Is there a plan months I can go that is close to the $32 per month?

  Hi Justin,

  The full price creative Cloud for individuals is $49.99 / month.

  If you add the broth, it's when you pay $79.98 / month.

  Please visit:-Creative Cloud price and membership plans | Adobe Creative Cloud

  For support:-contact us | Adobe

• Can I use CC on more than two devices (I have 3 Mac and 1 PC in the House) if I deactivate those that I do not?

  Can I use CC on more than two devices (I have 3 Mac and 1 PC in the House) if I deactivate those that I do not?

  Thank you

  Hi ingrid,.

  You can use Adobe Creative cloud on 2 machines.

  If you disconnect from the creative cloud on 1 machine which you use so you can activate it on another computer.

  Please see the help document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  Kind regards

  Sheena

• How have you joined two end on two separate lines drawn with the pen in CC2014, tried everything tool points!

  How can I join two end drawn with the pen tool points in CC2104

  I tried and it doesn't work?

• How to connect 3 end points to 1 row reserved

  Is it possible to set up a group of MAX lines linking 3 end points to a single line of a matrix card 4 x 128, which was reserved for routing?

  I need to have all four rows defined as reserved for routing so I can set up all my other road groups by specifying endpoints.

  Thank you
  Jason

  Hi Jason,

  I guess you don't use OR-Switch 2.3.  To my knowledge, NI Switch Executive came out only with the following versions: 2.0, 2.0.1, 2.1, 2.1.1 3.0.

  The option you listed is not your only option, but this is the option I recommend for older versions of NI Switch Executive.  Don't forget that you can use groups of road to store the line separate to the Poles, while only a call connection is required.

  One extra option that you have is to use two NI Switch Executive devices virtual.  A virtual device a module the PXI-2532 lines reserved for routing and the other virtual device is not.  Whenever you want to connect more than one column on the same line, you may close the session to the 'reserved for routing' virtual device and log on to the other virtual device (where you connect several end of column points to the same line).  Note that you can not sessions open to two virtual devices at the same time because they try to share the same hardware.

  Upgrades to NI Switch Executive 3.0 a possibility?  There are two additional functions, you enjoy:

  • Intuitive graphical Configuration utility
  1. Point-and-click graphical configuration environment - allows rapid development of switching systems
  2. Change channel aliases in place
  3. Create complex routing groups by clicking matrix points one at a time
  • Import/export of Microsoft Excel
  1. Easily export the NI Switch Executive configuration in Microsoft Excel environment
  2. Increase the number of channels by simple text manipulation
  3. Easily import files newly edited in NI Switch Executive

  It would be great if the upgrade have been an option.  Let me know if you have any other questions!

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA

• Table 1 d with rejection of the two consecutive points

  Hello

  I have table 1 d with 10 measuring points. I treat points in pairs and according to the difference between two consecutive points, I have decision weather the two points must remain in the table or should be rejected. For example, my 1 d table looks like this: 10, 20, 30, 35, 40, 44, 50, 51, 60, 69. I calculate the difference between consecutive points by pairs: 20-10 = 10, 35-30 = 5, 44-40 = 4, 51-50 = 1, 69-60 = 9. I would like to reject the table points with the value of the gap less than 2. In my case, the points are 50, 51 and the table after the rejection should have 8 items and look like this: 10, 20, 30, 35, 40, 44, 60, 69. What is the most elegant way to do it? I'm in LabVIEW 8.6.

  Thanks in advance!

  Review your original message and your example to better understand your stated requirements.

  "I treat the couple points."

  You have to take into account only the pair of 1st and 2nd point, then don't take into account the point of 3rd and 4th pair so on and so forth.

  Never consider the 2nd to 3rd or her never consider the 4th to the 5th, so on and so forth?

  What is your table? If it is very large (1000000 points), you may need to consider other options for the use of memory and speed.

• No sound - "either Windows Audio and Windows Audio services end Point Builder is not running."

  original title: no sound - Fix he said "either Windows Audio and Windows Audio services end Point Builder is not running."  What should do?

  When I ran Microsoft Fix it for audio, it says that it is unable to solve the problem.  The message was "two windows audio and Windows Audio end Point generator services must run for audio works correctly." At least one of these services is not running. "What should I do now?

  Content in double wire-
  "When I try to use anything related audioi on my computer (volume of the speaker, open iTunes, watch a video), a box appears that reads,"c\Windows\System32\MMDevApi.dll is not designed to run on Windows or it contains an error. " Try to install the program by using the original installation media or contact your system administrator or support software provider. "The mystery is that I have nothing to my computer to ask for that. I have not installed anything new or change the settings. It just started happening. Any advice? »

  Hello

  1. are you able to hear the sound after the error message?

  2. you have an an external sound card or internal, installed on the computer?

  Method 1:

  I suggest you to follow the steps and check.

  (a) click Start

  (b) type services.msc in the search box, and then press enter.

  (c) scroll down to Windows Audio and Windows Audio endpoint builder of Point

  (d) both should be started and set to automatic if one or both are arrested.

  (e) click the name to select it.

  (f) click on restart the service at the top left.

  (g) repeat for both if necessary. If some are not set to automatic, and then double-click the name and on the drop-down list to set the startup type to automatic and apply and ok your way out.

  Method 2:

  I suggest you to run the automated FIXIT from the link below. You can also follow the other steps and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 3:

  If you have a sound card, I suggest you uninstall the audio driver from the Device Manager and and then install the latest audio driver version from the sound card manufacturer's website.

  To uninstall the Device Manager sound, proceed as described in the link below.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Find the audio driver in the list, do a right click and Uninstall.

  You can also download the drivers from the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:

  If the steps do not help, I also suggest you to run a scan of the System File Checker .

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Hope this helps and keep us posted.

• [Developer] End point to a more recent version of Flash?

  Is there an end point Adobe I can ping that address with the current version number?

  My use case:

  On the page, I have a flash video player, and if flash is out of date I want to reset the player with html5 rather than forcing the user to download the latest version of flash to see the content.

  With swfobject, you can do swfobject.hasFlashPlayerVersion('14.0') and see if the flash version of the browser is equal to or greater than a certain number. But it's not sustainable. One day, the browser will require a greater number than I just hardcoded. (I know I could go in manually whenever you update).

  Possible alternative: a way to query the browser to see what version of flash, it requires not to display the widget "Flash obsolete.

  I tried the solution of this question AS getURL, but I could not any javascript to run this way. There may be flash security requirements that are no longer this possible solution.

  There is not a mechanism with support to determine the latest version programmatically.

• Is it possible to get programmatically the end points of a Switch Executive road connected in LabVIEW?

  I am writing an application for plotting of curve for evaluation of ASIC devices and should link all of the pairs of pins possible to do this. I use the main switch to load in the roads, there is a specific ASIC and want to get programmatically the end points of the current road for insertion in the logging system. Is this possible?

  Thank you

  Nick

  It can be an adventure, but you can get there.

  

• Straight line between two polar points

  Hi all

  I created a VI that could be traced a Polar curve according to time-distance formula. The VI has present Mag and target Mag. each with its own angle (Polar form that is (r, theta)). I want to draw a straight line from the current point to the target point. I used the time-distance formula to trace the scale and used the same slope to point the angle. However, I get a curved path as shown in the attachment.

  Could someone tell me what formula can be used to draw a straight line from the current point to the target point?

  Thank you.

  1 convert two polar points in rectangular coordinates.

  2. generate the points between the two.  You can use the function of ramp or some other methods to generate points.

  3 convert points to polar coordinates and draw.  Nice straight line!

  Of course, the question is why do you want a straight line when you use the polar coordinates?  He will not directly be r or theta.

  Bruce

• visa usb communication in bulk - several end points

  Hi all

  I'll put up a spectrometer optics USB2000 + ocean and want to use visa instead of the dll that I had with the spectrometer (I had a lot of stability problems, moreover, this is not supported by the ocean optics and I won't have to pay for the new version).  I have documentation for the spectrometer and were able to set the integration time and receive ghosts as quickly that the dll has been able to.  But I was not able to read the information of calibration of the spectrometer.  All controls use the transfer block, so I use visa read and write to send/receive.  I think it's the difference between the spectral data and calibration data, that the data comes from different points of termination.   The spectrometer has 4 endpoint addresses (3-PC = IN, 1 PC = OUTSIDE).  The spectral data returns to the first endpoint and the calibration data is on 3rd in.

  Is there a setting I need to change to read from a different end point?  They are all in bulk type according to the documentation.  Any suggestion would be appreciated.

  Thank you!

  Hey gharris,.

  It seems that there is a parameter, you can change by a property node that will change reading from what endpoint. If you use a text-based program, the property, you need to change is VI_ATTR_USB_BULK_IN_PIPE. If you are using LabVIEW, follow these steps:

  First of all, to ask a VISA property on your block diagram node (really any node property works). Then, right-click on the property node and select Select class-> VISA-> / o Session-> USB Raw. This step can be found in attached below EndpointSS1.png and change the property node to a node property USB Raw. Thirdly, left-click on the property and select settings USB-> pipe in bulk. This step can be found in EndpointSS2.png, attached below. It is the property that defines at what endpoint to read from. To change the value of the present, right-click on the property node and select change all to write, which will allow you to connect to an endpoint value.

• "There is no end point for the end point mapper.

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  Whenever I have try and configure the accounts of FS, I get an error that says: "there is no end point to the end point mapper.  I tried to uninstall the parental control and re - install the latest version several times and I get the same error.  I created several new accounts and tried to tie but still the same error.

  Any help?

  I had the same problem and the error you mentioned above... Has been frustrating me. After working through the questions Tech above, I discovered that it was related to basic and Windows Firewall filtering engine.

  Check if your Windows Firewall is working properly, and if you can make changes. If you get an error code when you try to change your firewall settings, which could be what it is.

  I followed this to correct the BFE and Windows Firewall it retries then parental control and he went through with NO PROBLEMS of...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-B561-bc49cbdad904

  Hope this works for you as well...