How to connect 3 end points to 1 row reserved

Similar Questions

• How to connect multiple entry points?

  I created two entry points for my application according to the examples here and in the SDK documentation.

  Now my question is how to connect these two? I have a few assumptions and suggestions of my own listed below. I would be grateful if someone their checked or provided best practices. Thanks jeff

  -Store PERIOD: this is the method recommended for entry points Exchange State

  -GlobalEvents: need the registerting themselves as listeners globalevent?

  -IPC methods: because they are running in different processes, InterProcessCommunication should apply. The method available only here is a socket

  Using RuntimeStore or GlobalEvents are methods of the IPC. I prefer to use RuntimeStore, but I think the preference prevailing is for GlobalEvents.

• How to connect the out point no anchorpoints of two different paths?

  Hi all, I have a little problem not important, but I would like to know if possible to connect the anchor it s pointing to a closed form?

  
  

  

  You can not.

  IE7

• How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor

  Hello

  How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?

  Are there any adapter or cable that can help?

  Concerning

  M

  PCs have no support for the target Display Mode.

• Is it possible to get programmatically the end points of a Switch Executive road connected in LabVIEW?

  I am writing an application for plotting of curve for evaluation of ASIC devices and should link all of the pairs of pins possible to do this. I use the main switch to load in the roads, there is a specific ASIC and want to get programmatically the end points of the current road for insertion in the logging system. Is this possible?

  Thank you

  Nick

  It can be an adventure, but you can get there.

  

• How can I open the end point of a letter/police?

  Hi all

  I try to open the end point of a letter using Illustrator. The attached image shows what I'm trying to achieve. I did it by putting a white shape on top of it, but it will not work for a logo to be used on a coloured background, for example. What I need is to be able to open the end without having to add forms, or to be able to merge these forms to the letter, it becomes a path or shape (but I had no chance of being able to find a way to do it).

  I hope I made sense! I'm rather perplexed, so any help would be greatly appreciated.

  Thank you!

  

  Sukipop,

  Forms of letters assuming paths as usual vector illustrations (Type > vectorize or similar) with black outlines, you can:

  (1) select the paths of the letter and the object > path > Outline Stroke.

  (2) ShiftClickDrag with the line tool Segment each location where you want to cut paths/forms (horizontal lines), then object > path > divide objects below, then select the unwanted bits and press DELETE.

• How to manually set the end point of my sequence in the window of the exporter? (Newbie question)

  Hey guys, I think it was easy to do in older versions of first, but I'm not sure.  In the export window, I want to put the final point of the media that I export manually.  All I can use is the small triangle on the right, but that gives me no details.  Curiously, I can manually enter the starting point in time code, but not the end point (it is unclickable).

  Thoughts?

  Thank you!

  Hi BigBrother69,

  bigbrother69 wrote:

  In the export window, I want to put the final point of the media that I export manually.  All I can use is the small triangle on the right, but that gives me no details.

  In the export settings dialog box, drag the playhead to the intended to point, and then press 'o'.

  Thank you
  Kevin

• Want to 750-209: how to connect an old sound system to a new computer

  I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need a derivation ending in female connectors.

  My question? How to connect the two? Is it still possible? I'd hate to have a decent sound system of junk. My needs are basic - just to be able to listen on AOL or YouTube.

  Any ideas on how to accomplsh my goal.

  Just to close this debate; unfortunaely the quick response has not responded to the problem. BestBuy has suggested that I try a composed of derivation of a shot and 2 containers. Finally, I got the system works 'after' discovery that the enormous power brick disliked the new arrangement of power when I replaced the old computer with the desire. I had to replace an adapter 3 - wat and consolidate the brick. A lot of noise to get her old system to work but now I have the choice of speakers or headphones driven by a hold on a HDMI monitor. All's well that ends well. Thanks for the interest.

• How to connect 12 '' MacBook (2015) to a 24 "or 27" Apple Cinema Display AND fresh!

  I made this post on my site here: https://underground.net/how-to-connect-an-apple-display-to-a-usb-c-macbook/ (which I will update regularly)

  This installation took me a LONG time to understand, but it works very well, no wake mode 'sleep', etc.

  To connect the new MacBook to a 24″ Cinema Display or Apple 27″ LED Display Monitor (who both have a record which is the same as the Thunderbolt connector, but are not actually screens Thunderbolt) you can opt for a really cheap option, as the following point 3.1 AllSmartLife USB Type C adapter Mini DisplayPort Amazon for $ 20 :

  

  That works very well, but you cannot load your computer when you are connected to the screen, nor can you plug something else on your computer as an external hard drive, etc.

  To be able to recharge your computer AND connect to the screen AND connect other devices to your MacBook, you need the following configuration, and it works great, btw.

  1 first download this USB-C for USB multi-port, Belinda® USB-C for 3 ports USB 3.0 , which is about $ 36 on Amazon.

  

  2 then, you need an expensive element, StarTech.com USB 3.0 to DisplayPort 2560 x 1600 video card Multi monitor external adapter (USB32DPPRO), which is around $74 on Amazon:

  

  3 Finally you need a cheap item, the Cable questions DisplayPort / Mini DisplayPort male to female adapter at $ 9 on Amazon:

  

  Plug all the in such things and he ends up you look pretty clean where it connects to the computer, as you can see below and you can plug in the USB port of the screen on the hub and use the speakers on the screen, AND you still an available for a hard drive, external USB 3.0 port.

  

  It will cost you around $119! Wow, that's a LOT, but it works. Or you can go cheap and just get the first card for $20 but charge your MacBook by disconnecting from time to time to plug in the charger. What a PAIN in the * Apple.

  The new MacBooks coming will be equipped with a combined USB/Thunderbolt-c plug that should * hope * connect a screen and charge at the same time cheaper, but who knows?

  If you want me to your post something, I can put it on the MacBook 2015 using forum boards.

• is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  Dear all,

  Need help :)

  1.

  is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  my customers will not buy TP - lic :)

  Topology:

  8900 (jabber) - CUCM-(SIP) - SX10

  2.

  Customer, have MCU machine.

  If not possible. is it possible, meeting point of MCU use?

  Topology:

  8900 (jabber) - CUCM - MCU - SX10

  1. Yes, but it is not that simple and straightforward that the SX10 can be reached by calling is the public IP address and CUCM does not support the IP address numbering is not a SIP address format...

  2. Yes, using the MCU would be much simpler, easier and, in my opinion, a better solution to be implemented. Here is an example of how a stand-alone SX10 could dial the IP address of the MCU standard automatic.

  You can also assign a SIP URI address to the meeting point which the SX10 can connect to.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• How to connect my device bluetooth on HP Pavilion dv5-1135ee

  Hello

  In fact my bluetooth device is not plugged in, although the wireless LAN works fine!

  All the time I try to change the Bluetooth options in order to allow others to see my computer, he said "it seems your bluetooth device not connected correctly.

  Please info on how to connect my bluetooth device on HP Pavilion dv5-1135ee, keeping in mind that the turn on button is a perspective!

  and with this optical touch, I activated the WLAN + Bluetooth

  Wireless LAN works, and has no Bluetooth!

  I tried to download Bluetooth driver associated with my (Vista home edition) operating system from HP website, but @ acertain point configuration stopped, saying the same error that 'Bluetooth device is not detected.

  Any Info?

  Kind regards

  Message edited by Elnafarawi on 04/25/1987 12: 36

  AA

  Thank you very much, the problem has been resolved.

  The Solution: Run Windows Update and everything will be solved, actually it was an error inherenet on vista (Micrososft ISATAP adapter) so it might conflict with the Bluetooth device, and once the update is installed, all return to it's origin.

• How to connect a Qosmio G30 to TV?

  I have a Qosmio G30 and a HD ready 37 "TV.
  How to connect the laptop to the TV?

  The cable I have is a SCART on one end to the TV and the other end to the laptop. It says in the manual to do this, then press Fn + F5. It does not work! I tried everything in the manual and results cannot do.

  Any ideas anyone?

  Any help much appreciated.

  It will work you choose the right TV channel. If please activate the right port on the TV and after doing this use FN + F5 and select the TV option. I tested it with my Qosmio G30, but using the HDMI connection.

• How to connect signals Ni SCB - 264 X

  We bought PXI switch 2532 with TB-2641. We also have
  bought burst of SCB-264 X. I have a question about the signal
  connections. SCB-264 X is supplied with only the connections of signals (C0, C1
  etc). But what of the ground for each signal. How to connect the
  mass of each signal signal.

  Thank you

  Kitenge

  Hi Kitenge,

  The connection TB-2641 block creates a configuration of matrix 8 x 64 1-wire for the NI PXI-2532.

  1 - wire configurations are typically used for single-ended signals: when he shared there or return a common ground.  In these configurations, the constant signal line is usually wired externally (not changed).

  If a part of your application requires switching differential signals (2-wire), you can use an additional column for tracking on the ground of each signal.  Similarly, additional lines are required.

  If all your application passes only signals from 2 threads, then the TB-2643 or TB-2644 may be more appropriate than the TB-2641.

  The connection TB-2643 block creates a matrix 4 x 64 2 wires.

  The connection TB-2644 block creates a 8 x 32 2-wire matrix.

  I hope this helps!

  Chad Erickson
  Switch Product Support Engineer
  NOR - USA

• How to connect the value of the input string to numeric values

  Hello

  I'm trying to figure out how to connect the value of unique user input string to numeric values. Basically I want the user to enter the name of a gas that I have a list for (I think I put the list of gases in a table >). Then I want to match numeric values 2 'a' and 'b', according to which gas, name of the user has set. These 'a' and 'b' values will be automatically matched with the name of the gas in a list that I put. For example, hydrogen gas has the value 3 for "a" and 4 for "b. when the user puts the ' hydrogen' name in a string constant, automatically 'a' and 'b' must be issued.» I have connect a and b to a formula

  Thanks for any help

  Hello

  It is perhaps not exactly what you are looking for, but perhaps you could use the enumerated data type and the array of clusters of points (a, b).

  Look at the VI I enclose.

• How to connect an International ST75 components fluid flow meter to the DAQ system?

  Hello

  I am trying wire a ST75 meter to my DAQ system consisting of a device PCI 6052E DAQ, SCXI 1102 b card and a block to connect SCXI-1300. 1102 b has four 249 Ohm resistors connected to channels 0-3 for use with the current of the flow meter signals.

  The flow meter has two output signals 4-20 my and RTN, SINK, SOURCE and com connections The documentation is not clear how to connect the sensor to the Terminal Board, other than to say if the two output signals is used, one of the sons of RTN are used. So far, I can not get the signal from the flow meter to work in LabView, so I don't know if I have it plugged properly. Currently I have 1 wire OUTPUT on the Terminal Board + CH2, CH2 - wire to the chassis ground terminal and the COM lead on the sensor.

  Thanks in advance.

  Towards the end of the manual there are wiring diagrams:

  http://www.fluidcomponents.com/industrial/library/manuals/flowmeters/ST50, % 20ST 51, 20ST 75% 20Guides %2%...

  SINK/SOURCE/COM are used for pulse ouptuts. It seems that there are two outputs, one for 4-20mA temperature the other for flow.

  The one you need (flow) conjnction with RTN wired to use the + and - (or COM) your DAQ hardware.

  -AK2DM