Form data not shown unless the cursor in the field

Similar Questions

• Form is not updated once the fields in Adobe Reader XI

  I created a form in Acrobat X Pro has a lot of radio buttons, the user must select. The last page is the results page, which has the code JS that is executed when you enter the page. If I test the form in Acrobat X, the results page correctly updates the fields of results as soon as you enter the page.

  But if I open the page in Adobe Reader XI, the fields in the result page will not update until I save the page. This has happened before, forms behave the same in Acrobat and Reader. I also tested the forms created months ago and got the same result.

  Anyone know what is happening here?  Thank you.

  Yes, you can do everything from a single calculation script.

  Using the option Page Open should work as well, it's just an unusual way

  do...

• Satellite M100 does not illuminate unless the AC adapter is pluged

  I am also having the same problem with my Satellite M100. The computer does not illuminate unless the AC adapter is pluged and plugged into the power outlet.

  Any ideas on how to solve this problem? The battery should be fine.

  B.

  Hello

  Well, to me it sounds like a battery problem
  Why you say that the battery must be good?
  Have you checked it or because the technician?

  In most cases if the battery is faulty then the laptop would have no power until it would be connected to the power adapter.

  So I think (but that's just my personal opinion) the battery must be enabled (by technician, ASP) and if necessary should be replaced.

  See you soon

• (hp 6530 b) my speakers do not work unless the headphone is plugged!

  I have (hp 6530 b win 7 64) I have a problem of noise from my speakers do not work unless the headphones plugged I installed upgrading the sound card and the problem still there.

  and when I keep the connected headset and restart sound works normally, but after a few minutes back

  Finally I found the solution... it's the finger printing device and I don't know what the relationship is between the fingerprint and noise problem anyway the solution is to install the latest definition of the fingerprint and I found its proper functioning !

• The contents of the folder WAV files will not work unless the folder is on the desktop.

  Re: Windows Vista Home Premium 32 bit W/sp2 installed.

  I created a new folder for Wav files and set it on my desk until I was finished downloading the files for convenience purposes. I then used them to slightly change the default sounds for different commands, events and others. Everything worked fine until I moved the folder on the desktop to another location. Files located in the folder assigned and uncorrupted but will no longer work when the event or the command is enabled. If I move the folder to the desktop everything works well again. No error or anything are reported. The files in the folder will simply not work unless the folder is on the desktop. Is that all I could do to fix this?

  Hello

  1. what happens when you play the file from another location, you receive error message?

  2 - is that happen with some .wav files or all files?

  3. did you try copied the contents of the file and save it to another location and check the number?

  Step 1: Restart the computer to boot to verify if any third-party application is causing the problem.

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Make sure to restart the computer to normal startup followed step 7 in the link.

• Try to do a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  Original title: how to change system locale

  So I'm doing a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  I know how to do it manually. but I would like to create a program written in Java (or batch) to speed things up.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Captivate 9, sensitive slides on a Mac and a PC publish the slides, timed objects (show/hid) do not shown in the final html5.

  I have some 9 Captivate, sensitive slides on a Mac and a PC.

  When I published the slides, timed objects (show/hide) not shown in the final html5.

  Some slides contain objects such as some graphics (png), the arrows and text boxes that have a period of delay or show that for a given time.

  They work within Captivate when I executed the chronology, but do not yet show in the published code. I tried several different browsers.

  Any idea why these objects do not appear?

  Thank you, I have yet seen that I didn't just look.  Once, he toured. Jim

• sides and prognoses are not shown in the images of the film, although that marked in the LR presets. Who can help?

  sides and prognoses are not shown in the images of the film, although that marked in the LR presets. Who can help?

  found the solution: the film was small!

• Search history form does not record in the latest version of Gmail, but not in the old version

  In the latest version of Gmail, no history of search form will save, but it does in the old version of Gmail. I checked the settings to clear all history, and they are all correct, because it does not remove another story of shape, including the old version of Gmail. This happens only in the new version, that's why I continued to use the old version. I also checked for conflicts of plugin and there is not. I'm on WinXP-SP3 using the 3.6.6 latest version of Firefox.

  Gmail can use autocomplete = "off" for this form to avoid registration of form data.

  Here is a bookmarklet to check that:
  javascript:(function() }}catch(e) return(r)}R(self);var i,x;for(i=0;x=frames[i];++i)R(x); })();
  See http://en.wikipedia.org/wiki/Bookmarklet

• When you use fireftp I use the FTP user name and password to connect, but then when I try to connect I get "password not shown" in the lower left corner. Why?

  That's what shows the box below:

  331 user [email protected] OK. Password required

        PASS (password not shown)
  

  Many terminal-style applications remove the password from appearing in the journal of communication, to protect any person who could later read the newspaper. I think that FireFTP that emule. It is important to be able to view the password?

• Oracle Forms URL not accessible outside the server

  Dear all,

  I am facing problems of access to the URL of Forms under Oracle Forms 11 g when you access from the server.

  Intended to test, I created a new Oracle Forms on a VMWare Server environment.

  Details on my environment

  Windows 2008 R2 64-bit Server

  Oracle Web Logic Server 11g R1 64-bit

  Oracle 11 g R2 64-bit forms and reports

  Oracle Database 11 g R2 64 bit

  Virtual machine network connection works fine. I am able to Remote Desktop, sqlplus and access the Admin of WebLogic Console (port 7002) from my local system.

  But when connecting to the URL of the form it does not connect. It gives me the following error. Forms URL works fine when accessing the server.

  It seems you're connected to the Internet, but you might want to try to reconnect to the Internet.

  
  

  By using the following URL format to access the Forms http://formsserver:7007/forms/frmservlet? config = < appname >

  
  

  Please let me know if anyone has the solution.

  Thank you

  Mohamed Yusuf Salih
  

  Be careful when you make changes.  If you are not familiar with the operation of the listeners, you can easily make a problem worse.  Assuming that you have installed using the "Deployment" installation option, the default non - ssl ports must be as follows:

  OSH - 8888

  Server administration WLS - 7001

  WLS_FORM - 9001

  WLS_REPORTS - 9002

  Once configured correctly, calling the forms or reports occurs through the same port of OSH.  Thus, for example:

  http://server:8888/forms/frmservlet ...

  http://server:8888/reports/rwservlet ...

• FDM 11.1.2.2 fdm adapter not shown when the location is created

  Hello

  FDM 11.1.2.2 fdm adapter is not displayed when the application is created in places

  I'm so when I tried to import data to test data access error

  and in the error log saying his request does not exist

  Please help me solve this problem

  Couple of solution to try

  1. recreate the import format and then reload again as sometimes get corrupted as well.

  2. place an excerpt from the sample of data to load into the Inbox and see if it load successfully.

  3. the account that you use to connect to SQL must have read access as when Bulk Insert is used, FDM creates two temporary files, which is the .tmp file referenced in your error message. The .tmp file is an insert in bulk. In order to run an insert action block in SQL, FDM uses the network account that runs the MSSQL Server service. Account goes off in the Inbox of FDM, reads the file and them slap it in the database.

  Thank you

  ~ KKT ~.

• OdisendMail not shown in the diagram of package

  Hello

  Although the silly question. I try to use tool OdiSendEmail in the package. I know there will be drag and drop the odisendtool from Toolbox to the diagram area.

  the problem nothing happens when I drag and drop to the chart area. (odisendmail does not come to the area of Cédric of the package). search google for hours... no idea...

  Help, please

  ASP.

  Your SMTP server requires authentication which is not possible with OdiSendMail.

  Document 424304.1 on My Oracle Support describes how to send a mail with authentication on the server of SMTP with Jython in ODI.

  Document 424624.1 (about impact Antivirus) and Document 566475.1 (FAQ about the Jython code) can be useful as well.

  Also, a blogger wrote about this: http://karanbalkar.com/2013/06/send-e-mail-using-jython-in-oracle-data-integrator/

  Kind regards

  JeromeFr

• Form is not submitting to the databases

  Hello

  I'm having a problem right now. Everything I click on the page complete the registration on this site.

  https://www.encourageexcellence.org/registration.php

  Entered values present or return error messages. Could you show me what I'm doing wrong? Here is the code

  [CODE]

  <? PHP

  If (isset($_POST['submitted'])) {}

  require_once('Connections/encourage.php');

  $fields = array)

  "e-mail address",

  "State":

  "district."

  "kind."

  "age."

  "profession."

  );

  If (safe($_POST['survey']=="Yes")) {}

  $survey = "Yes";

  }

  else {}

  $survey = "no";

  }

  {foreach ($fields as $fieldName)

  If (isset($_POST[$FieldName]) and safe (trim (stripslashes($_POST[$fieldName])))! == ") {}

  $$fieldName = safe (trim (stripslashes($_POST[$fieldName])));

  } else {}

  $errors [] = ' Please enter your '. $fieldName. ""; "code to validate fields.

  }

  If (filter_var ($email, FILTER_VALIDATE_EMAIL) == true) {}

  } else {}

  $errors [] = "Please enter a valid e-mail address ';

  }

  }

  {if (! isset ($Errors))}

  $query = "SELECT user_id FROM participating WHERE email = '$email" ";

  $result = mysql_query ($query);

  If (mysql_num_rows ($result) == 0) {}

  $query = "INSERT INTO participating (email, State, district, sex, age, profession, survey, registration_date)

  VALUES ('$email', '$state', '$district', '$gender', '$age', '$profession', '$survey', NOW()) "; databasse connection

  $result = mysql_query ($query);

  If ($result) {}

      $url = ' http:// '. $_SERVER ["HTTP_HOST"]. dirname($_SERVER['PHP_SELF']);

  If ((substr ($url,-1) == ' / ') |) (substr ($url,-1) == ' \')) {

  $url = substr ($url, 0, -1);

  }

  $url. = ' / thanks.php';

  Header ("Location: $url"); This is the error line that signals after having submitted to the database

  Exit();

  } else {}

  $errors [] = ' you can not be saved due to a system error. We apologize for any inconvenience. " ;

  $errors [] = mysql_error(). ' < br / > < br / > query: '. $query;

  }

  } else {}

  $errors [] = "e-mail address has already been registered.";

  }

  }

  mysql_close();

  } else {}

  $errors = NULL;

  }

  If (! empty ($errors)) {}

  echo "< h1 id ="mainhead"> error!" < / h1 >

  < class p 'error' = > the following error occurred: < br / > ';

  {foreach ($errors as $msg)

  echo ""--$msg < br / > \n ";"

  }

  echo "< /p > < p > please try again." < /p > < p > < br / > < / p > ';

  }

  safe ($string) function

  {

  $pattern = /\r|\n|\%0a|\%0d| "Content\-Type." Bcc. à : | "cc: / I";

  Return preg_replace ($pattern, cm, $string);

  }

  ? >

  <! - html code - >

  < form id = "form1" name = "form1" method = "post" action "registration.php" >

  < fieldset class = "first" >

  < class label = 'email' for 'email' = > Email: * < / label >

  < input name = "email" value = "<?" PHP if (isset($_POST['email'])) echo $_POST ['email'];? > "/ >"

  < label for = "State" / > State: * < / label >

  < input name = "State" value = "<?" PHP if (isset($_POST['state'])) echo $_POST ['State'];? > "/ >"

  < label for = "schooldistrict" / > School District: * < / label >

  < input name = "district" value = "<?" PHP if (isset($_POST['district'])) echo $_POST ['district'];? ">" / >

  < label for 'sex' = > gender: * < / label >

  < select name = "sex" >

  < option > choose your type < / option >

  < option value = 'male' <? PHP echo ($form ["gender"] == "male"?) ('selected': "); > > male < / option >

  < option value = 'female' <? PHP echo ($form ['gender'] == 'feminine'?) ('selected': "); > > female < / option >

  < / select >

  < label for = "age" / > your age: * < / label >

  < input name = "age" type = "text" class = "age" maxlength = value "2" = "<?" PHP if (isset($_POST['age'])) echo $_POST ['age'];? ">" / >

  < label for = 'profession' / > Profession: * < / label >

  < input name = "profession" value = "<?" PHP if (isset($_POST['profession'])) echo $_POST ['profession'];? ">" / >

  < label for = "poll" / > willingness to participate in future surveys: < / label >

  < input name = "survey" type = "checkbox" value = "Yes" / >

  < / fieldset >

  < fieldset >

  < input name = "submit" type = 'submit' class = "btn1" value = "Finish registration" / >

  < Input class = "btn" name = "reset" type = "reset" value = "Clear form" / >

  < input type = "hidden" name = "subject" value = "TRUE" / >

  < / fieldset >

  < / make >

  [/ CODE]

  Thanks in advance!

  Nope, it's quite possible, more it is easier to create pages to redirect. I actually discovered the problem. I actaully started to do the javascript validation and added the somehow, since I was not finished with the project and somoehow to remove the week last. in any case, thanks for your response.

• Data will not remain in the fields

  I created a form in Acrobat, then on another computer and pulled to the top of the form.  Everything looks fine, but when I type the data in the field and tab to the next field, the data goes.  If I click on the first field, it seems to be there.  But when I try to print, it isn't here.  I had no problem when I got the form on the original computer - this computer has Acrobat, the 2nd computer account player.  Any ideas?

  You will need Adobe Acrobat to solve this problem.  It's the fields of default fonts. Make sure that it is a True Type such as Helvitica or Times Roman font.

  I hope this helps.